Re: [Xen-devel] [Embedded-pv-devel] Xen on RCarH3 Starter Kit

["Ganesh H" <ganesh.h@xxxxxxxxxxxxxxx>]

Dear Andrii,

Sorry for the confusion. I am having an RCarH3 starter kit. Is there a Xen port 
available for RCarH3 starter kit right now?
If not what are the steps to create one?

Best Regards
Ganesh.H


-----Original Message-----
From: Andrii Anisov [mailto:andrii.anisov@xxxxxxxxx] 
Sent: Tuesday, January 16, 2018 7:22 PM
To: Ganesh H <ganesh.h@xxxxxxxxxxxxxxx>
Cc: xen-devel@xxxxxxxxxxxxxxxxxxxx; embedded-pv-devel@xxxxxxxxxxxxxxxxxxxx
Subject: Re: [Embedded-pv-devel] Xen on RCarH3 Starter Kit

Dear Ganesh,

Could you please specify your exact target board? Is it salvator-x or starter 
kit premier (h3ulcb)?
Actually Renesas BSP 2.19.0 is easily being built for salvator-x. In step 8 you 
should select an appropriate conf from 
`meta-rcar-gen3/docs/sample/conf/salvator-x/`.

> But the Yocto build instructions given in the link is for RcarH3 
> Starter kit.So I am unable to find Image-r8a7795-salvator-x-xen.dtb
You would not find it if you build for u3ulcb machine, this is restricted in 
the recipe [1].

> and xen-salvator-x.uImage which is mentioned in the tutorial.
I guess in your build it is named xen-h3ulcb.uImage, it is set in another 
recipe [2].

> Does the Xen dtb and uImage for salvator will work on RCarH3 starter kit.
Xen image is machine agnostic. Salvator-X specific dtb is not suitable for 
h3ulcb.

> Can anyone explain what can be the issue and the fix for it.
Add a h3ulcb device tree to [3], update recipe [2].
Do not forget to PR the stuff to our meta-demo.

[1] - 
https://github.com/xen-troops/meta-demo/blob/master/meta-rcar-gen3-xen/recipes-kernel/linux/linux-renesas_4.9.bbappend#L13

[2] - 
https://github.com/xen-troops/meta-demo/blob/master/meta-rcar-gen3-xen/recipes-extended/xen/xen_git.bbappend#L17

[3] - 
https://github.com/xen-troops/meta-demo/tree/master/meta-rcar-gen3-xen/recipes-kernel/linux/linux-renesas

Sincerely,
Andrii Anisov.


2018-01-16 8:52 GMT+02:00 Ganesh  H <ganesh.h@xxxxxxxxxxxxxxx>:
> Hi,
>
>
>
> Does Xen support RCarH3 Starter Kit -  
> https://elinux.org/R-Car/Boards/H3SK
>
>
>
> I followed the build procedures explained in this link for Salvator X 
> - 
> https://wiki.xenproject.org/wiki/Xen_ARM_with_Virtualization_Extension
> s/Salvator-X
>
>
>

>
> Can anyone explain what can be the issue and the fix for it. Does the 
> Xen dtb and uImage for salvator will work on RCarH3 starter kit.
>
>
>
> Best Regards
>
> Ganesh.H
>
>
>
>
> _______________________________________________
> Embedded-pv-devel mailing list
> Embedded-pv-devel@xxxxxxxxxxxxxxxxxxxx
> https://lists.xenproject.org/mailman/listinfo/embedded-pv-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel