[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs()



On Fri, Mar 19, 2010 at 11:22:54AM -0700, Jeremy Fitzhardinge wrote:
> On 03/19/2010 10:59 AM, Pasi Kärkkäinen wrote:
>> On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote:
>>    
>>>     Attached is the capture log after changing the grub.conf to
>>>
>>>     ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset
>>>     initcall_debug debug swiotlb=force apic=debug loglevel=10
>>>
>>>     for the dom 0 kernel command  line.
>>>
>>>      
>> Hmm, interesting. Now it seems to crash in a different place.
>>
>> Jeremy: Have you seen this one earlier?
>>    
>
> No, but it looks like the result of "apic=debug" on the kernel command  
> line.  That won't do anything useful (the kernel has no APICs, they all  
> belong to Xen), and can only cause harm.  As it appears to have done.
>

Ok, my bad.

So please remove the "apic=debug" from the dom0 kernel cmdline and try again.
It should look like this:

ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset 
initcall_debug debug loglevel=10

-- Pasi

>     J
>
>> .... IRQ redirection table:
>>   NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
>>   00 000 0    0    0   0   0    0    0    00
>> IRQ to pin mappings:
>> BUG: unable to handle kernel NULL pointer dereference at (null)
>> IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
>> PGD 0
>> Oops: 0000 [#1] SMP
>> last sysfs file:
>> CPU 0
>> Modules linked in:
>> Pid: 1, comm: swapper Not tainted 2.6.32.10 #2
>> RIP: e030:[<ffffffff819bf0e0>]  [<ffffffff819bf0e0>] 
>> print_all_ICs+0x487/0x500
>> RSP: e02b:ffff880064edbe20  EFLAGS: 00010286
>> RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01
>> RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000
>> RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000
>> R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000
>> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
>> FS:  0000000000000000(0000) GS:ffff880005ec8000(0000) knlGS:0000000000000000
>> CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
>> CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660
>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>> Process swapper (pid: 1, threadinfo ffff880064eda000, task ffff880064ee0000)
>> Stack:
>>   ffff880000000000 ffffffff00000000 ffff880000000000 ffffffff811ebee8
>> <0>  ffff880064edbe60 0000000181083e7c 000000ff00000002 0000000000000002
>> <0>  ffff880000000000 ffffffff810846f0 ffffffff817ce660 00000000291fd332
>> Call Trace:
>>   [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e
>>   [<ffffffff810846f0>] ? ktime_get+0x78/0x93
>>   [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
>>   [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
>>   [<ffffffff819ae961>] kernel_init+0x172/0x1cc
>>   [<ffffffff81013eaa>] child_rip+0xa/0x20
>>   [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
>>   [<ffffffff81013810>] ? restore_args+0x0/0x30
>>   [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89
>>   [<ffffffff81013ea0>] ? child_rip+0x0/0x20
>> Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 e8 11 d5 
>> 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 40<48>  83 3b 00 74 
>> 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4
>> RIP  [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500
>>   RSP<ffff880064edbe20>
>> CR2: 0000000000000000
>> ---[ end trace 0007ad9d59420718 ]---
>> swapper used greatest stack depth: 4168 bytes left
>> Kernel panic - not syncing: Attempted to kill init!
>> Pid: 1, comm: swapper Tainted: G      D    2.6.32.10 #2
>> Call Trace:
>>   [<ffffffff8105b747>] panic+0xa5/0x167
>>   [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf
>>   [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701
>>   [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1
>>   [<ffffffff8108f823>] ? lock_release+0x179/0x184
>>   [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf
>>   [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c
>>   [<ffffffff8105efa7>] do_exit+0x7e/0x701
>>   [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
>>   [<ffffffff8147764c>] oops_end+0xbf/0xc7
>>   [<ffffffff81038a02>] no_context+0x1f1/0x200
>>   [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef
>>   [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4
>>   [<ffffffff8100f452>] ? check_events+0x12/0x20
>>   [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15
>>   [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2
>>   [<ffffffff814769d5>] page_fault+0x25/0x30
>>   [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500
>>   [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e
>>   [<ffffffff810846f0>] ? ktime_get+0x78/0x93
>>   [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500
>>   [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b
>>   [<ffffffff819ae961>] kernel_init+0x172/0x1cc
>>   [<ffffffff81013eaa>] child_rip+0xa/0x20
>>   [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc
>>   [<ffffffff81013810>] ? restore_args+0x0/0x30
>>   [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89
>>   [<ffffffff81013ea0>] ? child_rip+0x0/0x20
>>
>>
>> -- Pasi
>>
>>
>>    
>>>
>>>     On Thu, Mar 18, 2010 at 2:27 PM, Pasi Kärkkäinen<[1]pasik@xxxxxx>  
>>> wrote:
>>>
>>>       On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote:
>>>       >     pvdisplay does not work in my RHEL machine.
>>>       >
>>>       >     I did  pvscan.
>>>       >     below is the output.
>>>       >
>>>       >     PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free]
>>>       >
>>>       >     Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ]
>>>       >
>>>
>>>       Ok so /dev/sda2 is the correct device holding the VolGroup01.
>>>
>>>       Looking at your latest capture.doc I see this:
>>>
>>>       Command line: ro root=/dev/vg00/lv01  console=hvc0 earlyprintk=xen
>>>       nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10
>>>
>>>       So your root= parameter is wrong! Edit grub.conf and replace it with 
>>> the
>>>       actual root device:
>>>       root=/dev/VolGroup01/LogVol00
>>>
>>>       -- Pasi
>>>
>>>       >     On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen
>>>       <[1][2]pasik@xxxxxx>  wrote:
>>>       >
>>>       >       On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote:
>>>       >       >     I did the below steps for pvops dom 0 kernel.
>>>       >       >
>>>       >       >     make menuconfig
>>>       >       >     make bzImage
>>>       >       >     make modules
>>>       >       >     make modules_install
>>>       >       >     cp -a .config /boot/config-2.6.32.10
>>>       >       >     cp -a System.map /boot/System.map-2.6.32.10
>>>       >       >     cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10
>>>       >       >     /sbin/mkinitrd -f --builtin=ahci 
>>> /boot/initrd-2.6.32.10.img
>>>       >       2.6.32.10
>>>       >       >     I tried root=/dev/VolGroup01/LogVol00 .
>>>       >       >
>>>       >
>>>       >       Ok.
>>>       >
>>>       >       Please run "pvdisplay" to see which actual partition is the 
>>> LVM
>>>       PV for
>>>       >       your
>>>       >       volume group.
>>>       >
>>>       >       Also if you're running Fedora 12 you could try generating an
>>>       initrd
>>>       >       image
>>>       >       with dracut instead of mkinitrd.
>>>       >
>>>       >       -- Pasi
>>>       >
>>>       >       >
>>>       >       >     On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen
>>>       >       <[1][2][3]pasik@xxxxxx>  wrote:
>>>       >       >
>>>       >       >       On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore 
>>> kumar
>>>       wrote:
>>>       >       >       >     Here is the output of df -h and cat /etc/fstab 
>>> of my
>>>       >       machine.
>>>       >       >       >
>>>       >       >
>>>       >       >       Did you try both root=/dev/mapper/VolGroup01-LogVol00 
>>> and
>>>       >       >       root=/dev/VolGroup01/LogVol00 arguments for the dom0
>>>       kernel?
>>>       >       >
>>>       >       >       How did you generate the initrd image for the dom0 
>>> kernel?
>>>       >       >
>>>       >       >       Anyway this sounds like a grub.conf or initrd 
>>> problem, not
>>>       Xen or
>>>       >       pvops
>>>       >       >       dom0 kernel kernel problem.
>>>       >       >
>>>       >       >       -- Pasi
>>>       >       >
>>>       >       >       >     Please let me know your thoughts.
>>>       >       >       >
>>>       >       >       >     [root@localhost kishore]# df -h
>>>       >       >       >
>>>       >       >       >     Filesystem Size Used Avail Use% Mounted on
>>>       >       >       >
>>>       >       >       >     /dev/mapper/VolGroup01-LogVol00
>>>       >       >       >
>>>       >       >       >                                         223G 29G 
>>> 182G 14%
>>>       /
>>>       >       >       >
>>>       >       >       >     /dev/sda1 99M 81M 13M 87% /boot
>>>       >       >       >
>>>       >       >       >     tmpfs 757M 0 757M 0% /dev/shm
>>>       >       >       >
>>>       >       >       >     [root@localhost kishore]# cat /etc/fstab
>>>       >       >       >
>>>       >       >       >     /dev/VolGroup01/LogVol00 / ext3 defaults 1 1
>>>       >       >       >
>>>       >       >       >     LABEL=/boot /boot ext3 defaults 1 2
>>>       >       >       >
>>>       >       >       >     tmpfs /dev/shm tmpfs defaults 0 0
>>>       >       >       >
>>>       >       >       >     devpts /dev/pts devpts gid=5,mode=620 0 0
>>>       >       >       >
>>>       >       >       >     sysfs /sys sysfs defaults 0 0
>>>       >       >       >
>>>       >       >       >     proc /proc proc defaults 0 0
>>>       >       >       >
>>>       >       >       >     /dev/VolGroup01/LogVol01 swap swap defaults 0 0
>>>       >       >       >
>>>       >       >       >     [root@localhost kishore]#
>>>       >       >       >
>>>       >       >       >     On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen
>>>       >       >       <[1][2][3][4]pasik@xxxxxx>  wrote:
>>>       >       >       >
>>>       >       >       >       On Tue, Mar 16, 2010 at 03:40:46PM -0700, 
>>> kishore
>>>       kumar
>>>       >       wrote:
>>>       >       >       >       >     I am not sure.  Can you please let me 
>>> know how
>>>       to
>>>       >       check
>>>       >       >       this? any
>>>       >       >       >       command
>>>       >       >       >       >     ??
>>>       >       >       >
>>>       >       >       >       well simple "df -h" will show it. and also 
>>> "cat
>>>       >       /etc/fstab".
>>>       >       >       >       You can also check it from your grub
>>>       configuration.. from
>>>       >       the
>>>       >       >       working
>>>       >       >       >       baremetal (non-Xen) entry.
>>>       >       >       >
>>>       >       >       >       -- Pasi
>>>       >       >       >       >
>>>       >       >       >       >     On Tue, Mar 16, 2010 at 3:29 PM, Pasi
>>>       Kärkkäinen
>>>       >       >       >       <[1][2][3][4][5]pasik@xxxxxx>  wrote:
>>>       >       >       >       >
>>>       >       >       >       >       On Tue, Mar 16, 2010 at 03:22:50PM 
>>> -0700,
>>>       kishore
>>>       >       kumar
>>>       >       >       wrote:
>>>       >       >       >       >       >     attached  is the log captured 
>>> in with
>>>       the word
>>>       >       >       document .
>>>       >       >       >       >       >
>>>       >       >       >       >
>>>       >       >       >       >       Scanning logical volumes
>>>       >       >       >       >        Reading all physical volumes.  This 
>>> may
>>>       take a
>>>       >       while...
>>>       >       >       >       >       Activating logical volumes
>>>       >       >       >       >        Volume group "VolGroup01" not found
>>>       >       >       >       >       Trying to resume from
>>>       /dev/VolGroup01/LogVol01
>>>       >       >       >       >       Unable to access resume device
>>>       >       (/dev/VolGroup01/LogVol01)
>>>       >       >       >       >       Creating root device.
>>>       >       >       >       >       Mounting root filesystem.
>>>       >       >       >       >       mount: could not find filesystem 
>>> '/dev/root'
>>>       >       >       >       >       Setting up other filesystems.
>>>       >       >       >       >       Setting up new root fs
>>>       >       >       >       >       setuproot: moving /dev failed: No 
>>> such file
>>>       or
>>>       >       directory
>>>       >       >       >       >       no fstab.sys, mounting internal 
>>> defaults
>>>       >       >       >       >       setuproot: error mounting /proc: No 
>>> such
>>>       file or
>>>       >       directory
>>>       >       >       >       >       setuproot: error mounting /sys: No 
>>> such file
>>>       or
>>>       >       directory
>>>       >       >       >       >       Switching to new root and running 
>>> init.
>>>       >       >       >       >       unmounting old /dev
>>>       >       >       >       >       unmounting old /proc
>>>       >       >       >       >       unmounting old /sys
>>>       >       >       >       >       switchroot: mount failed: No such 
>>> file or
>>>       directory
>>>       >       >       >       >       init used greatest stack depth: 4088 
>>> bytes
>>>       left
>>>       >       >       >       >       Kernel panic - not syncing: Attempted 
>>> to
>>>       kill init!
>>>       >       >       >       >
>>>       >       >       >       >       So it seems it gets all the way to 
>>> executing
>>>       the
>>>       >       initrd
>>>       >       >       image,
>>>       >       >       >       >       which then fails to mount the root fs.
>>>       >       >       >       >
>>>       >       >       >       >       Earlier in the log:
>>>       >       >       >       >       ata1: SATA link up 3.0 Gbps (SStatus 
>>> 123
>>>       SControl
>>>       >       300)
>>>       >       >       >       >       ata1.00: ATA-8: Hitachi 
>>> HDT721025SLA380,
>>>       STBOA3AA,
>>>       >       max
>>>       >       >       UDMA/133
>>>       >       >       >       >       ata1.00: 488397168 sectors, multi 0: 
>>> LBA48
>>>       NCQ
>>>       >       (depth
>>>       >       >       31/32), AA
>>>       >       >       >       >       ata1.00: configured for UDMA/133
>>>       >       >       >       >       scsi 0:0:0:0: Direct-Access     ATA
>>>        Hitachi
>>>       >       HDT72102
>>>       >       >       STBO
>>>       >       >       >       PQ: 0
>>>       >       >       >       >       ANSI: 5
>>>       >       >       >       >       sd 0:0:0:0: Attached scsi generic sg0 
>>> type 0
>>>       >       >       >       >       sd 0:0:0:0: [sda] 488397168 512-byte 
>>> logical
>>>       >       blocks: (250
>>>       >       >       GB/232
>>>       >       >       >       GiB)
>>>       >       >       >       >       sd 0:0:0:0: [sda] Write Protect is off
>>>       >       >       >       >       sd 0:0:0:0: [sda] Mode Sense: 00 3a 
>>> 00 00
>>>       >       >       >       >       sd 0:0:0:0: [sda] Write cache: 
>>> enabled, read
>>>       cache:
>>>       >       >       enabled,
>>>       >       >       >       doesn't
>>>       >       >       >       >       support DPO or FUA
>>>       >       >       >       >        sda: sda1 sda2
>>>       >       >       >       >       sd 0:0:0:0: [sda] Attached SCSI disk
>>>       >       >       >       >
>>>       >       >       >       >       so /dev/sda was detected. Is your 
>>> root lvm
>>>       volume
>>>       >       on
>>>       >       >       /dev/sda ?
>>>       >       >       >       >       Is /dev/VolGroup01/LogVol01 really 
>>> your root
>>>       fs?
>>>       >       >       >       >
>>>       >       >       >       >       -- Pasi
>>>       >       >       >       >
>>>       >       >       >       >       >
>>>       >       >       >       >       >
>>>       >       >       >       >       >     On Tue, Mar 16, 2010 at 3:03 
>>> PM, Pasi
>>>       >       Kärkkäinen
>>>       >       >       >       >       <[1][2][3][4][5][6]pasik@xxxxxx>  
>>> wrote:
>>>       >       >       >       >       >
>>>       >       >       >       >       >       On Tue, Mar 16, 2010 at 
>>> 02:56:06PM
>>>       -0700,
>>>       >       kishore
>>>       >       >       kumar
>>>       >       >       >       wrote:
>>>       >       >       >       >       >       >     Please find the 
>>> attached log
>>>       file after
>>>       >       fixing
>>>       >       >       the
>>>       >       >       >       dom 0
>>>       >       >       >       >       kernel cmd
>>>       >       >       >       >       >       line
>>>       >       >       >       >       >       >     as below
>>>       >       >       >       >       >       >
>>>       >       >       >       >       >       >     ro 
>>> root=/dev/VolGroup01/LogVol00
>>>       >       console=hvc0
>>>       >       >       >       >       earlyprintk=xen
>>>       >       >       >       >       >       nomodeset
>>>       >       >       >       >       >       >
>>>       >       >       >       >       >
>>>       >       >       >       >       >       There's something wrong with 
>>> the log,
>>>       the
>>>       >       dom0
>>>       >       >       kernel
>>>       >       >       >       parts are
>>>       >       >       >       >       all on
>>>       >       >       >       >       >       one line..
>>>       >       >       >       >       >       It's really difficult to read 
>>> it.
>>>       >       >       >       >       >
>>>       >       >       >       >       >       -- Pasi
>>>       >       >       >       >       >
>>>       >       >       >       >       >       >     Thanks
>>>       >       >       >       >       >       >
>>>       >       >       >       >       >       >
>>>       >       >       >       >       >       >     On Tue, Mar 16, 2010 at 
>>> 2:29 PM,
>>>       Pasi
>>>       >       >       Kärkkäinen
>>>       >       >       >       >       >       
>>> <[1][2][3][4][5][6][7]pasik@xxxxxx>
>>>       wrote:
>>>       >       >       >       >       >       >
>>>       >       >       >       >       >       >       On Tue, Mar 16, 2010 
>>> at
>>>       02:16:22PM
>>>       >       -0700,
>>>       >       >       kishore
>>>       >       >       >       kumar
>>>       >       >       >       >       wrote:
>>>       >       >       >       >       >       >       >     I did below 
>>> steps.
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >      I pulled DOM 0 
>>> kernel
>>>       from
>>>       >       >       >       >       >       >       >     git clone
>>>       >       >       >       >       >       >
>>>       >       >       >       >       >
>>>       >       >       >       >
>>>       >       >       >
>>>       >       >
>>>       >
>>>       
>>> git://[1][2][3][4][5][6][7][8]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >       >       >       >       >       >       >     linux-2.6-xen
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     cd linux-2.6-xen
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     make clean
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     cp -a .config 
>>> .config-old
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     wget -O .config
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >
>>>       >       >       >       >       >
>>>       >       >       >       >
>>>       >       >       >
>>>       >       >
>>>       >
>>>        
>>> [2][3][4][5][6][7][8][9]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     make oldconfig
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     make bzImage
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     make modules
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     make 
>>> modules_install
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     cp -a .config
>>>       >       /boot/config-2.6.32.9
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     cp -a System.map
>>>       >       >       /boot/System.map-2.6.32.9
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     cp -a
>>>       arch/x86/boot/bzImage
>>>       >       >       >       /boot/vmlinuz-2.6.32.9
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     and modified the
>>>       grub.conf as
>>>       >       below
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     Root(hd0,0)
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >      kernel /xen.gz
>>>       console=vga,com1
>>>       >       >       >       com1=115200,8n1
>>>       >       >       >       >       msi=1
>>>       >       >       >       >       >       iommu=1
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >      module 
>>> /vmlinuz-2.6.32.9
>>>       ro
>>>       >       >       >       >       root=/dev/VolGroup01/LogVo100
>>>       >       >       >       >       >        rhgb
>>>       >       >       >       >       >       >       quiet
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >      module
>>>       /initrd-2.6.32.9.img
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     and rebooted 
>>> the machine.
>>>        Then
>>>       >       It
>>>       >       >       booted with
>>>       >       >       >       some
>>>       >       >       >       >       xen
>>>       >       >       >       >       >       messages
>>>       >       >       >       >       >       >       and
>>>       >       >       >       >       >       >       >     stopped.  Those 
>>> were the
>>>       >       messages
>>>       >       >       captured
>>>       >       >       >       from
>>>       >       >       >       >       serial
>>>       >       >       >       >       >       console.
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     Please let me 
>>> know if I
>>>       did
>>>       >       something
>>>       >       >       wrong
>>>       >       >       >       here.
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >
>>>       >       >       >       >       >       >       Please fix the kernel 
>>> cmdline
>>>       based
>>>       >       on my
>>>       >       >       earlier
>>>       >       >       >       email,
>>>       >       >       >       >       and
>>>       >       >       >       >       >       capture and
>>>       >       >       >       >       >       >       post the
>>>       >       >       >       >       >       >       serial console log 
>>> again!
>>>       >       >       >       >       >       >
>>>       >       >       >       >       >       >       -- Pasi
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     On Tue, Mar 16, 
>>> 2010 at
>>>       1:20 PM,
>>>       >       Pasi
>>>       >       >       >       Kärkkäinen
>>>       >       >       >       >       >       >
>>>        <[3][4][5][6][7][8][9][10]pasik@xxxxxx>
>>>       >       wrote:
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >       On Tue, Mar 
>>> 16, 2010 at
>>>       >       01:16:28PM
>>>       >       >       -0700,
>>>       >       >       >       Jeremy
>>>       >       >       >       >       >       Fitzhardinge
>>>       >       >       >       >       >       >       wrote:
>>>       >       >       >       >       >       >       >       >  On 
>>> 03/16/2010 12:48
>>>       PM, Pasi
>>>       >       >       Kärkkäinen
>>>       >       >       >       wrote:
>>>       >       >       >       >       >       >       >       >>  On Tue, 
>>> Mar 16, 2010
>>>       at
>>>       >       09:43:44PM
>>>       >       >       +0200,
>>>       >       >       >       Pasi
>>>       >       >       >       >       >       Kärkkäinen
>>>       >       >       >       >       >       >       wrote:
>>>       >       >       >       >       >       >       >       >>
>>>       >       >       >       >       >       >       >       >>>  On Tue, 
>>> Mar 16,
>>>       2010 at
>>>       >       >       10:32:17AM
>>>       >       >       >       -0700,
>>>       >       >       >       >       kishore
>>>       >       >       >       >       >       kumar
>>>       >       >       >       >       >       >       wrote:
>>>       >       >       >       >       >       >       >       >>>
>>>       >       >       >       >       >       >       >       >>>>      
>>> Attached is
>>>       the
>>>       >       output
>>>       >       >       captured
>>>       >       >       >       from
>>>       >       >       >       >       serial
>>>       >       >       >       >       >       console.
>>>       >       >       >       >       >       >       >       >>>>
>>>       >       >       >       >       >       >       >       >>>>      
>>> Machine does
>>>       not boot
>>>       >       after
>>>       >       >       >       compiling xen
>>>       >       >       >       >       3.4.3
>>>       >       >       >       >       >       with
>>>       >       >       >       >       >       >       pv_ops dom
>>>       >       >       >       >       >       >       >       0 kernel.
>>>       >       >       >       >       >       >       >       >>>>
>>>       >       >       >       >       >       >       >       >>>>      
>>> Please let me
>>>       know
>>>       >       what is
>>>       >       >       going
>>>       >       >       >       wrong
>>>       >       >       >       >       here.
>>>       >       >       >       >       >       >       >       >>>>
>>>       >       >       >       >       >       >       >       >>>>
>>>       >       >       >       >       >       >       >       >>>  Ok this 
>>> looks like
>>>       a bug
>>>       >       that is
>>>       >       >       already
>>>       >       >       >       being
>>>       >       >       >       >       sorted
>>>       >       >       >       >       >       out on
>>>       >       >       >       >       >       >       >       xen-devel 
>>> mailinglist.
>>>       >       >       >       >       >       >       >       >>>  I added 
>>> CC to
>>>       xen-devel.
>>>       >       >       >       >       >       >       >       >>>
>>>       >       >       >       >       >       >       >       >>>
>>>       >       >       >       >       >       >       >       >>
>>>       >       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >       >  Those 
>>> messages are
>>>       not a
>>>       >       problem in
>>>       >       >       >       themselves,
>>>       >       >       >       >       but the
>>>       >       >       >       >       >       related
>>>       >       >       >       >       >       >       >       problem
>>>       >       >       >       >       >       >       >       >  is 
>>> believed to be
>>>       fixed in
>>>       >       current
>>>       >       >       >       >       xen/stable-2.6.32.x.
>>>       >       >       >       >       >        It
>>>       >       >       >       >       >       >       looks like
>>>       >       >       >       >       >       >       >       >  the output 
>>> stops
>>>       there
>>>       >       because the
>>>       >       >       Xen
>>>       >       >       >       console
>>>       >       >       >       >       isn't set
>>>       >       >       >       >       >       up
>>>       >       >       >       >       >       >       properly
>>>       >       >       >       >       >       >       >       for
>>>       >       >       >       >       >       >       >       >  some 
>>> reason.
>>>       >       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >       Yeah, remove 
>>> "rhgb
>>>       quiet" from
>>>       >       the
>>>       >       >       options..
>>>       >       >       >       the
>>>       >       >       >       >       dom0
>>>       >       >       >       >       >       kernel
>>>       >       >       >       >       >       >       cmdline
>>>       >       >       >       >       >       >       >       should be 
>>> like this:
>>>       >       >       >       >       >       >       >       ro
>>>       >       root=/dev/VolGroup01/LogVol00
>>>       >       >       >       console=hvc0
>>>       >       >       >       >       >       earlyprintk=xen
>>>       >       >       >       >       >       >       nomodeset
>>>       >       >       >       >       >       >       >       -- Pasi
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >  References
>>>       >       >       >       >       >       >       >
>>>       >       >       >       >       >       >       >     Visible links
>>>       >       >       >       >       >       >       >     1.
>>>       >       >       >       >       >
>>>       >       >       >       >
>>>       >       >       >
>>>       >       >
>>>       >
>>>        
>>> [5][6][7][8][9][10][11]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >       >       >       >       >       >       >     2.
>>>       >       >       >       >       >       >
>>>       >       >       >       >       >
>>>       >       >       >       >
>>>       >       >       >
>>>       >       >
>>>       >
>>>       
>>> [6][7][8][9][10][11][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >       >       >       >       >       >       >     3.
>>>       >       mailto:[7][8][9][10][11][12][13]pasik@xxxxxx
>>>       >       >       >       >       >       >
>>>       >       >       >       >       >       >  References
>>>       >       >       >       >       >       >
>>>       >       >       >       >       >       >     Visible links
>>>       >       >       >       >       >       >     1.
>>>       >       mailto:[9][10][11][12][13][14]pasik@xxxxxx
>>>       >       >       >       >       >       >     2.
>>>       >       >       >       >       >
>>>       >       >       >       >
>>>       >       >       >
>>>       >       >
>>>       >
>>>        
>>> [10][11][12][13][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >       >       >       >       >       >     3.
>>>       >       >       >       >       >
>>>       >       >       >       >
>>>       >       >       >
>>>       >       >
>>>       >
>>>        
>>> [11][12][13][14][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >       >       >       >       >       >     4.
>>>       >       mailto:[12][13][14][15][16][17]pasik@xxxxxx
>>>       >       >       >       >       >       >     5.
>>>       >       >       >       >       >
>>>       >       >       >       >
>>>       >       >       >
>>>       >       >
>>>       >
>>>        
>>> [13][14][15][16][17][18]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >       >       >       >       >       >     6.
>>>       >       >       >       >       >
>>>       >       >       >       >
>>>       >       >       >
>>>       >       >
>>>       >
>>>        
>>> [14][15][16][17][18][19]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >       >       >       >       >       >     7.
>>>       >       mailto:[15][16][17][18][19][20]pasik@xxxxxx
>>>       >       >       >       >       >       >  Asserting Post complete 
>>> GPIO!!!
>>>       >       >       >       >       >       >  Transfer control to CSM 
>>> 16-bit
>>>       binary for
>>>       >       legacy
>>>       >       >       boot
>>>       >       >       >       >       >       >   __  __            _____ _ 
>>>  _
>>>        _____
>>>       >       >         _  _
>>>       >       >       >       >       >       >   \ \/ /___ _ __   |___ /| 
>>> || |
>>>        |___ /
>>>       >        _ __
>>>       >       >       ___| || |
>>>       >       >       >           _
>>>       >       >       >       >       __  _
>>>       >       >       >       >       >       __ ___
>>>       >       >       >       >       >       >    \  // _ \ '_ \    |_ \| 
>>> || |_
>>>       |_ \ __|
>>>       >       '__/
>>>       >       >       __| ||
>>>       >       >       >       |_ __|
>>>       >       >       >       >       '_ \|
>>>       >       >       >       >       >       '__/ _ \
>>>       >       >       >       >       >       >    /  \  __/ | | |  ___) 
>>> |__   _|
>>>       ___) |__|
>>>       >       | |
>>>       >       >       (__|__
>>>       >       >       >       _|__|
>>>       >       >       >       >       |_) | |
>>>       >       >       >       >       >       |  __/
>>>       >       >       >       >       >       >   /_/\_\___|_| |_| |____(_)
>>>       |_|(_)____/
>>>       >       |_|
>>>       >       >        \___|  |_|
>>>       >       >       >          |
>>>       >       >       >       >       .__/|_|
>>>       >       >       >       >       >        \___|
>>>       >       >       >       >       >       >
>>>       >       >       >           |_|
>>>       >       >       >       >       >       >  (XEN) Xen version 
>>> 3.4.3-rc4-pre
>>>       >       >       (kishore@localdomain)
>>>       >       >       >       (gcc
>>>       >       >       >       >       version
>>>       >       >       >       >       >       4.1.2 20080704 (Red Hat 
>>> 4.1.2-46))
>>>       Mon Mar
>>>       >       15
>>>       >       >       13:44:31 PDT
>>>       >       >       >       2010
>>>       >       >       >       >       >       >  (XEN) Latest ChangeSet: 
>>> Tue Mar 09
>>>       >       18:15:52 2010
>>>       >       >       +0000
>>>       >       >       >       >       >       19924:6e72f8c3c017
>>>       >       >       >       >       >       >  (XEN) Command line:
>>>       console=vga,com1
>>>       >       >       com1=115200,8n1
>>>       >       >       >       msi=1
>>>       >       >       >       >       iommu=1
>>>       >       >       >       >       >       >  (XEN) Video information:
>>>       >       >       >       >       >       >  (XEN)  VGA is text mode 
>>> 80x25, font
>>>       8x16
>>>       >       >       >       >       >       >  (XEN)  VBE/DDC methods: 
>>> none; EDID
>>>       >       transfer time:
>>>       >       >       0
>>>       >       >       >       seconds
>>>       >       >       >       >       >       >  (XEN)  EDID info not 
>>> retrieved
>>>       because no
>>>       >       DDC
>>>       >       >       retrieval
>>>       >       >       >       method
>>>       >       >       >       >       >       detected
>>>       >       >       >       >       >       >  (XEN) Disc information:
>>>       >       >       >       >       >       >  (XEN)  Found 1 MBR 
>>> signatures
>>>       >       >       >       >       >       >  (XEN)  Found 1 EDD 
>>> information
>>>       structures
>>>       >       >       >       >       >       >  (XEN) Xen-e820 RAM map:
>>>       >       >       >       >       >       >  (XEN)  0000000000000000 -
>>>       000000000009d000
>>>       >       >       (usable)
>>>       >       >       >       >       >       >  (XEN)  000000000009d000 -
>>>       00000000000a0000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >  (XEN)  00000000000e0000 -
>>>       0000000000100000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >  (XEN)  0000000000100000 -
>>>       000000006d597000
>>>       >       >       (usable)
>>>       >       >       >       >       >       >  (XEN)  000000006d597000 -
>>>       000000006d686000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >  (XEN)  000000006d686000 -
>>>       000000006f598000
>>>       >       >       (usable)
>>>       >       >       >       >       >       >  (XEN)  000000006f598000 -
>>>       000000006f59a000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >  (XEN)  000000006f59a000 -
>>>       000000006f5af000
>>>       >       (ACPI
>>>       >       >       NVS)
>>>       >       >       >       >       >       >  (XEN)  000000006f5af000 -
>>>       000000006f5d9000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >  (XEN)  000000006f5d9000 -
>>>       000000006f5f9000
>>>       >       (ACPI
>>>       >       >       data)
>>>       >       >       >       >       >       >  (XEN)  000000006f5f9000 -
>>>       000000006f6df000
>>>       >       (ACPI
>>>       >       >       NVS)
>>>       >       >       >       >       >       >  (XEN)  000000006f6df000 -
>>>       000000006f700000
>>>       >       (ACPI
>>>       >       >       data)
>>>       >       >       >       >       >       >  (XEN)  000000006f700000 -
>>>       0000000080000000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >  (XEN)  00000000a0000000 -
>>>       00000000b0000000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >  (XEN)  00000000fc000000 -
>>>       00000000fd000000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >  (XEN)  00000000fed1c000 -
>>>       00000000fed20000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >  (XEN)  00000000ffc00000 -
>>>       0000000100000000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >  (XEN) System RAM: 1780MB
>>>       (1823000kB)
>>>       >       >       >       >       >       >  (XEN) ACPI: RSDP 000F03F0, 
>>> 0024 (r2
>>>       INTEL
>>>       >       )
>>>       >       >       >       >       >       >  (XEN) ACPI: XSDT 6F6FE120, 
>>> 0064 (r1
>>>       INTEL
>>>       >        THRLY
>>>       >       >       >         0
>>>       >       >       >       >       >       1000013)
>>>       >       >       >       >       >       >  (XEN) ACPI: FACP 6F6FD000, 
>>> 00F4 (r4
>>>       INTEL
>>>       >        THRLY
>>>       >       >       >         0
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >        100000D)
>>>       >       >       >       >       >       >  (XEN) ACPI: DSDT 6F6F5000, 
>>> 74F1 (r2
>>>       INTEL
>>>       >        THRLY
>>>       >       >       >         3
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >        100000D)
>>>       >       >       >       >       >       >  (XEN) ACPI: FACS 6F5F9000, 
>>> 0040
>>>       >       >       >       >       >       >  (XEN) ACPI: APIC 6F6F4000, 
>>> 01CC (r2
>>>       INTEL
>>>       >        THRLY
>>>       >       >       >         0
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >        100000D)
>>>       >       >       >       >       >       >  (XEN) ACPI: MCFG 6F6F3000, 
>>> 003C (r1
>>>       INTEL
>>>       >        THRLY
>>>       >       >       >         1
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >        100000D)
>>>       >       >       >       >       >       >  (XEN) ACPI: HPET 6F6F2000, 
>>> 0038 (r1
>>>       INTEL
>>>       >        THRLY
>>>       >       >       >         1
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >        100000D)
>>>       >       >       >       >       >       >  (XEN) ACPI: SLIT 6F6F1000, 
>>> 0030 (r1
>>>       INTEL
>>>       >        THRLY
>>>       >       >       >         1
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >        100000D)
>>>       >       >       >       >       >       >  (XEN) ACPI: WDDT 6F6F0000, 
>>> 0040 (r1
>>>       INTEL
>>>       >        THRLY
>>>       >       >       >         0
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >        100000D)
>>>       >       >       >       >       >       >  (XEN) ACPI: SSDT 6F5D9000, 
>>> 1FDDC
>>>       (r1
>>>       >        INTEL SSDT
>>>       >       >        PM
>>>       >       >       >       4000
>>>       >       >       >       >       INTL
>>>       >       >       >       >       >       20061109)
>>>       >       >       >       >       >       >  (XEN) ACPI: DMAR 6F6EE000, 
>>> 01D0 (r1
>>>       INTEL
>>>       >        THRLY
>>>       >       >       >         1
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >        100000D)
>>>       >       >       >       >       >       >  (XEN) Domain heap 
>>> initialised
>>>       >       >       >       >       >       >  (XEN) Processor #0 6:12 
>>> APIC
>>>       version 21
>>>       >       >       >       >       >       >  (XEN) Processor #2 6:12 
>>> APIC
>>>       version 21
>>>       >       >       >       >       >       >  (XEN) Processor #4 6:12 
>>> APIC
>>>       version 21
>>>       >       >       >       >       >       >  (XEN) Processor #16 6:12 
>>> APIC
>>>       version 21
>>>       >       >       >       >       >       >  (XEN) Processor #18 6:12 
>>> APIC
>>>       version 21
>>>       >       >       >       >       >       >  (XEN) Processor #20 6:12 
>>> APIC
>>>       version 21
>>>       >       >       >       >       >       >  (XEN) Processor #1 6:12 
>>> APIC
>>>       version 21
>>>       >       >       >       >       >       >  (XEN) Processor #3 6:12 
>>> APIC
>>>       version 21
>>>       >       >       >       >       >       >  (XEN) Processor #5 6:12 
>>> APIC
>>>       version 21
>>>       >       >       >       >       >       >  (XEN) Processor #17 6:12 
>>> APIC
>>>       version 21
>>>       >       >       >       >       >       >  (XEN) Processor #19 6:12 
>>> APIC
>>>       version 21
>>>       >       >       >       >       >       >  (XEN) Processor #21 6:12 
>>> APIC
>>>       version 21
>>>       >       >       >       >       >       >  (XEN) IOAPIC[0]: apic_id 
>>> 8, version
>>>       32,
>>>       >       address
>>>       >       >       >       0xfec00000, GSI
>>>       >       >       >       >       0-23
>>>       >       >       >       >       >       >  (XEN) IOAPIC[1]: apic_id 
>>> 9, version
>>>       32,
>>>       >       address
>>>       >       >       >       0xfec90000, GSI
>>>       >       >       >       >       24-47
>>>       >       >       >       >       >       >  (XEN) Enabling APIC mode:  
>>> Phys.
>>>        Using 2
>>>       >       I/O
>>>       >       >       APICs
>>>       >       >       >       >       >       >  (XEN) Intel VT-d DMAR 
>>> tables have
>>>       been
>>>       >       parsed.
>>>       >       >       >       >       >       >  (XEN) Using scheduler: SMP 
>>> Credit
>>>       >       Scheduler
>>>       >       >       (credit)
>>>       >       >       >       >       >       >  (XEN) Detected 3200.207 MHz
>>>       processor.
>>>       >       >       >       >       >       >  (XEN) VMX: Supported 
>>> advanced
>>>       features:
>>>       >       >       >       >       >       >  (XEN)  - APIC MMIO access
>>>       virtualisation
>>>       >       >       >       >       >       >  (XEN)  - APIC TPR shadow
>>>       >       >       >       >       >       >  (XEN)  - Extended Page 
>>> Tables (EPT)
>>>       >       >       >       >       >       >  (XEN)  - Virtual-Processor
>>>       Identifiers
>>>       >       (VPID)
>>>       >       >       >       >       >       >  (XEN)  - Virtual NMI
>>>       >       >       >       >       >       >  (XEN)  - MSR direct-access 
>>> bitmap
>>>       >       >       >       >       >       >  (XEN) VMX: EPT is 
>>> available.
>>>       >       >       >       >       >       >  (XEN) VMX: VPID is 
>>> available.
>>>       >       >       >       >       >       >  (XEN) HVM: VMX enabled
>>>       >       >       >       >       >       >  (XEN) HVM: Hardware 
>>> Assisted Paging
>>>       >       detected.
>>>       >       >       >       >       >       >  (XEN) CPU0: Intel Genuine 
>>> Intel(R)
>>>       CPU
>>>       >       >         000
>>>       >       >       >        @
>>>       >       >       >       >       3.20GHz
>>>       >       >       >       >       >       stepping 00
>>>       >       >       >       >       >       >  (XEN) Booting processor 
>>> 1/2 eip
>>>       88000
>>>       >       >       >       >       >       >  (XEN) CPU1: Intel Genuine 
>>> Intel(R)
>>>       CPU
>>>       >       >         000
>>>       >       >       >        @
>>>       >       >       >       >       3.20GHz
>>>       >       >       >       >       >       stepping 00
>>>       >       >       >       >       >       >  (XEN) Booting processor 
>>> 2/4 eip
>>>       88000
>>>       >       >       >       >       >       >  (XEN) CPU2: Intel Genuine 
>>> Intel(R)
>>>       CPU
>>>       >       >         000
>>>       >       >       >        @
>>>       >       >       >       >       3.20GHz
>>>       >       >       >       >       >       stepping 00
>>>       >       >       >       >       >       >  (XEN) Booting processor 
>>> 3/16 eip
>>>       88000
>>>       >       >       >       >       >       >  (XEN) CPU3: Intel Genuine 
>>> Intel(R)
>>>       CPU
>>>       >       >         000
>>>       >       >       >        @
>>>       >       >       >       >       3.20GHz
>>>       >       >       >       >       >       stepping 00
>>>       >       >       >       >       >       >  (XEN) Booting processor 
>>> 4/18 eip
>>>       88000
>>>       >       >       >       >       >       >  (XEN) CPU4: Intel Genuine 
>>> Intel(R)
>>>       CPU
>>>       >       >         000
>>>       >       >       >        @
>>>       >       >       >       >       3.20GHz
>>>       >       >       >       >       >       stepping 00
>>>       >       >       >       >       >       >  (XEN) Booting processor 
>>> 5/20 eip
>>>       88000
>>>       >       >       >       >       >       >  (XEN) CPU5: Intel Genuine 
>>> Intel(R)
>>>       CPU
>>>       >       >         000
>>>       >       >       >        @
>>>       >       >       >       >       3.20GHz
>>>       >       >       >       >       >       stepping 00
>>>       >       >       >       >       >       >  (XEN) Booting processor 
>>> 6/1 eip
>>>       88000
>>>       >       >       >       >       >       >  (XEN) CPU6: Intel Genuine 
>>> Intel(R)
>>>       CPU
>>>       >       >         000
>>>       >       >       >        @
>>>       >       >       >       >       3.20GHz
>>>       >       >       >       >       >       stepping 00
>>>       >       >       >       >       >       >  (XEN) Booting processor 
>>> 7/3 eip
>>>       88000
>>>       >       >       >       >       >       >  (XEN) CPU7: Intel Genuine 
>>> Intel(R)
>>>       CPU
>>>       >       >         000
>>>       >       >       >        @
>>>       >       >       >       >       3.20GHz
>>>       >       >       >       >       >       stepping 00
>>>       >       >       >       >       >       >  (XEN) Booting processor 
>>> 8/5 eip
>>>       88000
>>>       >       >       >       >       >       >  (XEN) CPU8: Intel Genuine 
>>> Intel(R)
>>>       CPU
>>>       >       >         000
>>>       >       >       >        @
>>>       >       >       >       >       3.20GHz
>>>       >       >       >       >       >       stepping 00
>>>       >       >       >       >       >       >  (XEN) Booting processor 
>>> 9/17 eip
>>>       88000
>>>       >       >       >       >       >       >  (XEN) CPU9: Intel Genuine 
>>> Intel(R)
>>>       CPU
>>>       >       >         000
>>>       >       >       >        @
>>>       >       >       >       >       3.20GHz
>>>       >       >       >       >       >       stepping 00
>>>       >       >       >       >       >       >  (XEN) Booting processor 
>>> 10/19 eip
>>>       88000
>>>       >       >       >       >       >       >  (XEN) CPU10: Intel Genuine 
>>> Intel(R)
>>>       CPU
>>>       >       >         000
>>>       >       >       >        @
>>>       >       >       >       >       3.20GHz
>>>       >       >       >       >       >       stepping 00
>>>       >       >       >       >       >       >  (XEN) Booting processor 
>>> 11/21 eip
>>>       88000
>>>       >       >       >       >       >       >  (XEN) CPU11: Intel Genuine 
>>> Intel(R)
>>>       CPU
>>>       >       >         000
>>>       >       >       >        @
>>>       >       >       >       >       3.20GHz
>>>       >       >       >       >       >       stepping 00
>>>       >       >       >       >       >       >  (XEN) Total of 12 
>>> processors
>>>       activated.
>>>       >       >       >       >       >       >  (XEN) ENABLING IO-APIC IRQs
>>>       >       >       >       >       >       >  (XEN)  ->  Using new ACK 
>>> method
>>>       >       >       >       >       >       >  (XEN) checking TSC 
>>> synchronization
>>>       across
>>>       >       12
>>>       >       >       CPUs:
>>>       >       >       >       passed.
>>>       >       >       >       >       >       >  (XEN) Platform timer is 
>>> 14.318MHz
>>>       HPET
>>>       >       >       >       >       >       >  ?(XEN) Brought up 12 CPUs
>>>       >       >       >       >       >       >  (XEN) Intel VT-d Snoop 
>>> Control
>>>       supported.
>>>       >       >       >       >       >       >  (XEN) Intel VT-d DMA 
>>> Passthrough
>>>       not
>>>       >       supported.
>>>       >       >       >       >       >       >  (XEN) Intel VT-d Queued
>>>       Invalidation
>>>       >       supported.
>>>       >       >       >       >       >       >  (XEN) Intel VT-d Interrupt
>>>       Remapping
>>>       >       supported.
>>>       >       >       >       >       >       >  (XEN) I/O virtualisation 
>>> enabled
>>>       >       >       >       >       >       >  (XEN) I/O virtualisation 
>>> for PV
>>>       guests
>>>       >       disabled
>>>       >       >       >       >       >       >  (XEN) xenoprof: 
>>> Initialization
>>>       failed.
>>>       >       Intel
>>>       >       >       processor
>>>       >       >       >       model 44
>>>       >       >       >       >       for P6
>>>       >       >       >       >       >       class family is not supported
>>>       >       >       >       >       >       >  (XEN) *** LOADING DOMAIN 0 
>>> ***
>>>       >       >       >       >       >       >  (XEN)  Xen  kernel: 
>>> 64-bit, lsb,
>>>       compat32
>>>       >       >       >       >       >       >  (XEN)  Dom0 kernel: 
>>> 64-bit, PAE,
>>>       lsb,
>>>       >       paddr
>>>       >       >       0x1000000 ->
>>>       >       >       >       >       0x26bb000
>>>       >       >       >       >       >       >  (XEN) PHYSICAL MEMORY 
>>> ARRANGEMENT:
>>>       >       >       >       >       >       >  (XEN)  Dom0 alloc.:
>>>       >       >       0000000064000000->0000000068000000
>>>       >       >       >       >       (404490 pages
>>>       >       >       >       >       >       to be allocated)
>>>       >       >       >       >       >       >  (XEN) VIRTUAL MEMORY 
>>> ARRANGEMENT:
>>>       >       >       >       >       >       >  (XEN)  Loaded kernel:
>>>       >       >       ffffffff81000000->ffffffff826bb000
>>>       >       >       >       >       >       >  (XEN)  Init. ramdisk:
>>>       >       >       ffffffff826bb000->ffffffff82d0d800
>>>       >       >       >       >       >       >  (XEN)  Phys-Mach map:
>>>       >       >       ffffffff82d0e000->ffffffff83044050
>>>       >       >       >       >       >       >  (XEN)  Start info:
>>>       >       >        ffffffff83045000->ffffffff830454b4
>>>       >       >       >       >       >       >  (XEN)  Page tables:
>>>       >       >       ffffffff83046000->ffffffff83063000
>>>       >       >       >       >       >       >  (XEN)  Boot stack:
>>>       >       >        ffffffff83063000->ffffffff83064000
>>>       >       >       >       >       >       >  (XEN)  TOTAL:
>>>       >       >       ffffffff80000000->ffffffff83400000
>>>       >       >       >       >       >       >  (XEN)  ENTRY ADDRESS:
>>>       ffffffff819c1200
>>>       >       >       >       >       >       >  (XEN) Dom0 has maximum 12 
>>> VCPUs
>>>       >       >       >       >       >       >  (XEN) Scrubbing Free RAM: 
>>> .done.
>>>       >       >       >       >       >       >  (XEN) Xen trace buffers: 
>>> disabled
>>>       >       >       >       >       >       >  (XEN) Std. Loglevel: 
>>> Errors and
>>>       warnings
>>>       >       >       >       >       >       >  (XEN) Guest Loglevel: 
>>> Nothing
>>>       >       (Rate-limited:
>>>       >       >       Errors and
>>>       >       >       >       >       warnings)
>>>       >       >       >       >       >       >  (XEN) Xen is relinquishing 
>>> VGA
>>>       console.
>>>       >       >       >       >       >       >  (XEN) *** Serial input ->  
>>> DOM0
>>>       (type
>>>       >       'CTRL-a'
>>>       >       >       three
>>>       >       >       >       times to
>>>       >       >       >       >       switch
>>>       >       >       >       >       >       input to Xen)
>>>       >       >       >       >       >       >  (XEN) Freed 128kB init 
>>> memory.
>>>       >       >       >       >       >       >  mapping kernel into 
>>> physical memory
>>>       >       >       >       >       >       >  Xen: setup ISA identity 
>>> maps
>>>       >       >       >       >       >       >  about to get started...
>>>       >       >       >       >       >       >  Initializing cgroup subsys 
>>> cpuset
>>>       >       >       >       >       >       >  Initializing cgroup subsys 
>>> cpu
>>>       >       >       >       >       >       >  Linux version 2.6.32.9
>>>       >       >       (kishore@xxxxxxxxxxxxxxxxxxxxx)
>>>       >       >       >       (gcc
>>>       >       >       >       >       version
>>>       >       >       >       >       >       4.1.2 20080704 (Red Hat 
>>> 4.1.2-46)) #1
>>>       SMP
>>>       >       Mon Mar
>>>       >       >       15
>>>       >       >       >       15:16:28 PDT
>>>       >       >       >       >       2010
>>>       >       >       >       >       >       >  Command line: ro
>>>       >       root=/dev/VolGroup01/LogVol00
>>>       >       >       >       console=hvc0
>>>       >       >       >       >       >       earlyprintk=xen nomodeset
>>>       >       >       >       >       >       >  KERNEL supported cpus:
>>>       >       >       >       >       >       >    Intel GenuineIntel
>>>       >       >       >       >       >       >    AMD AuthenticAMD
>>>       >       >       >       >       >       >    Centaur CentaurHauls
>>>       >       >       >       >       >       >  BIOS-provided physical RAM 
>>> map:
>>>       >       >       >       >       >       >   Xen: 0000000000000000 -
>>>       000000000009d000
>>>       >       >       (usable)
>>>       >       >       >       >       >       >   Xen: 000000000009d000 -
>>>       0000000000100000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >   Xen: 0000000000100000 -
>>>       0000000066c0a000
>>>       >       >       (usable)
>>>       >       >       >       >       >       >   Xen: 000000006d597000 -
>>>       000000006d686000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >   Xen: 000000006f598000 -
>>>       000000006f59a000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >   Xen: 000000006f59a000 -
>>>       000000006f5af000
>>>       >       (ACPI
>>>       >       >       NVS)
>>>       >       >       >       >       >       >   Xen: 000000006f5af000 -
>>>       000000006f5d9000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >   Xen: 000000006f5d9000 -
>>>       000000006f5f9000
>>>       >       (ACPI
>>>       >       >       data)
>>>       >       >       >       >       >       >   Xen: 000000006f5f9000 -
>>>       000000006f6df000
>>>       >       (ACPI
>>>       >       >       NVS)
>>>       >       >       >       >       >       >   Xen: 000000006f6df000 -
>>>       000000006f700000
>>>       >       (ACPI
>>>       >       >       data)
>>>       >       >       >       >       >       >   Xen: 000000006f700000 -
>>>       0000000080000000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >   Xen: 00000000a0000000 -
>>>       00000000b0000000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >   Xen: 00000000fc000000 -
>>>       00000000fd000000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >   Xen: 00000000fed1c000 -
>>>       00000000fed20000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >   Xen: 00000000ffc00000 -
>>>       0000000100000000
>>>       >       >       (reserved)
>>>       >       >       >       >       >       >  bootconsole [xenboot0] 
>>> enabled
>>>       >       >       >       >       >       >  DMI 2.4 present.
>>>       >       >       >       >       >       >  last_pfn = 0x66c0a 
>>> max_arch_pfn =
>>>       >       0x400000000
>>>       >       >       >       >       >       >  init_memory_mapping:
>>>       >       >       0000000000000000-0000000066c0a000
>>>       >       >       >       >       >       >  RAMDISK: 026bb000 - 
>>> 02d0d800
>>>       >       >       >       >       >       >  ACPI: RSDP 
>>> 00000000000f03f0 00024
>>>       (v02
>>>       >       INTEL )
>>>       >       >       >       >       >       >  ACPI: XSDT 
>>> 000000006f6fe120 00064
>>>       (v01
>>>       >       INTEL
>>>       >       >        THRLY
>>>       >       >       >        00000000
>>>       >       >       >       >       >        01000013)
>>>       >       >       >       >       >       >  ACPI: FACP 
>>> 000000006f6fd000 000F4
>>>       (v04
>>>       >       INTEL
>>>       >       >        THRLY
>>>       >       >       >        00000000
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >       0100000D)
>>>       >       >       >       >       >       >  ACPI: DSDT 
>>> 000000006f6f5000 074F1
>>>       (v02
>>>       >       INTEL
>>>       >       >        THRLY
>>>       >       >       >        00000003
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >       0100000D)
>>>       >       >       >       >       >       >  ACPI: FACS 
>>> 000000006f5f9000 00040
>>>       >       >       >       >       >       >  ACPI: APIC 
>>> 000000006f6f4000 001CC
>>>       (v02
>>>       >       INTEL
>>>       >       >        THRLY
>>>       >       >       >        00000000
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >       0100000D)
>>>       >       >       >       >       >       >  ACPI: MCFG 
>>> 000000006f6f3000 0003C
>>>       (v01
>>>       >       INTEL
>>>       >       >        THRLY
>>>       >       >       >        00000001
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >       0100000D)
>>>       >       >       >       >       >       >  ACPI: HPET 
>>> 000000006f6f2000 00038
>>>       (v01
>>>       >       INTEL
>>>       >       >        THRLY
>>>       >       >       >        00000001
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >       0100000D)
>>>       >       >       >       >       >       >  ACPI: SLIT 
>>> 000000006f6f1000 00030
>>>       (v01
>>>       >       INTEL
>>>       >       >        THRLY
>>>       >       >       >        00000001
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >       0100000D)
>>>       >       >       >       >       >       >  ACPI: WDDT 
>>> 000000006f6f0000 00040
>>>       (v01
>>>       >       INTEL
>>>       >       >        THRLY
>>>       >       >       >        00000000
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >       0100000D)
>>>       >       >       >       >       >       >  ACPI: SSDT 
>>> 000000006f5d9000 1FDDC
>>>       (v01
>>>       >        INTEL
>>>       >       >       SSDT  PM
>>>       >       >       >       00004000
>>>       >       >       >       >       INTL
>>>       >       >       >       >       >       20061109)
>>>       >       >       >       >       >       >  ACPI:      
>>> 000000006f6ee000 001D0
>>>       (v01
>>>       >       INTEL
>>>       >       >        THRLY
>>>       >       >       >        00000001
>>>       >       >       >       >       MSFT
>>>       >       >       >       >       >       0100000D)
>>>       >       >       >       >       >       >  No NUMA configuration found
>>>       >       >       >       >       >       >  Faking a node at
>>>       >       >       0000000000000000-0000000066c0a000
>>>       >       >       >       >       >       >  Bootmem setup node 0
>>>       >       >       0000000000000000-0000000066c0a000
>>>       >       >       >       >       >       >    NODE_DATA 
>>> [0000000000008000 -
>>>       >       000000000001ffff]
>>>       >       >       >       >       >       >    bootmap 
>>> [0000000000020000 -
>>>       >        000000000002cd87]
>>>       >       >       pages d
>>>       >       >       >       >       >       >  (9 early reservations) ==> 
>>>  bootmem
>>>       >       [0000000000 -
>>>       >       >       >       0066c0a000]
>>>       >       >       >       >       >       >    #0 [0000000000 - 
>>> 0000001000]
>>>       BIOS data
>>>       >       page
>>>       >       >       ==>
>>>       >       >       >       [0000000000
>>>       >       >       >       >       -
>>>       >       >       >       >       >       0000001000]
>>>       >       >       >       >       >       >    #1 [0003046000 - 
>>> 0003063000]
>>>       XEN
>>>       >       PAGETABLES
>>>       >       >       ==>
>>>       >       >       >       [0003046000
>>>       >       >       >       >       -
>>>       >       >       >       >       >       0003063000]
>>>       >       >       >       >       >       >    #2 [0000006000 - 
>>> 0000008000]
>>>       >       TRAMPOLINE
>>>       >       >       ==>
>>>       >       >       >       [0000006000
>>>       >       >       >       >       -
>>>       >       >       >       >       >       0000008000]
>>>       >       >       >       >       >       >    #3 [0001000000 - 
>>> 000269ae98]
>>>        TEXT
>>>       >       DATA BSS
>>>       >       >       ==>
>>>       >       >       >       [0001000000
>>>       >       >       >       >       -
>>>       >       >       >       >       >       000269ae98]
>>>       >       >       >       >       >       >    #4 [00026bb000 - 
>>> 0002d0d800]
>>>       >        RAMDISK
>>>       >       >       ==>
>>>       >       >       >       [00026bb000
>>>       >       >       >       >       -
>>>       >       >       >       >       >       0002d0d800]
>>>       >       >       >       >       >       >    #5 [0002d0e000 - 
>>> 0003046000]
>>>       XEN START
>>>       >       INFO
>>>       >       >       ==>
>>>       >       >       >       [0002d0e000
>>>       >       >       >       >       -
>>>       >       >       >       >       >       0003046000]
>>>       >       >       >       >       >       >    #6 [000269b000 - 
>>> 000269b011]
>>>       >        BRK
>>>       >       >       ==>
>>>       >       >       >       [000269b000
>>>       >       >       >       >       -
>>>       >       >       >       >       >       000269b011]
>>>       >       >       >       >       >       >    #7 [0000100000 - 
>>> 000041a000]
>>>       >        PGTABLE
>>>       >       >       ==>
>>>       >       >       >       [0000100000
>>>       >       >       >       >       -
>>>       >       >       >       >       >       000041a000]
>>>       >       >       >       >       >       >    #8 [0000001000 - 
>>> 0000001030]
>>>          ACPI
>>>       >       SLIT
>>>       >       >       ==>
>>>       >       >       >       [0000001000
>>>       >       >       >       >       -
>>>       >       >       >       >       >       0000001030]
>>>       >       >       >       >       >       >  found SMP MP-table at
>>>       [ffff8800000fd750]
>>>       >       fd750
>>>       >       >       >       >       >       >  Zone PFN ranges:
>>>       >       >       >       >       >       >    DMA      0x00000000 ->  
>>> 0x00001000
>>>       >       >       >       >       >       >    DMA32    0x00001000 ->  
>>> 0x00100000
>>>       >       >       >       >       >       >    Normal   0x00100000 ->  
>>> 0x00100000
>>>       >       >       >       >       >       >  Movable zone start PFN for 
>>> each
>>>       node
>>>       >       >       >       >       >       >  early_node_map[2] active 
>>> PFN ranges
>>>       >       >       >       >       >       >      0: 0x00000000 ->  
>>> 0x0000009d
>>>       >       >       >       >       >       >      0: 0x00000100 ->  
>>> 0x00066c0a
>>>       >       >       >       >       >       >  ACPI: PM-Timer IO Port: 
>>> 0x408
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x00]
>>>       lapic_id[0x00]
>>>       >       >       enabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x01]
>>>       lapic_id[0x02]
>>>       >       >       enabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x02]
>>>       lapic_id[0x04]
>>>       >       >       enabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x03]
>>>       lapic_id[0x10]
>>>       >       >       enabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x04]
>>>       lapic_id[0x12]
>>>       >       >       enabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x05]
>>>       lapic_id[0x14]
>>>       >       >       enabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x06]
>>>       lapic_id[0x01]
>>>       >       >       enabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x07]
>>>       lapic_id[0x03]
>>>       >       >       enabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x08]
>>>       lapic_id[0x05]
>>>       >       >       enabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x09]
>>>       lapic_id[0x11]
>>>       >       >       enabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x0a]
>>>       lapic_id[0x13]
>>>       >       >       enabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x0b]
>>>       lapic_id[0x15]
>>>       >       >       enabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x0c]
>>>       lapic_id[0xff]
>>>       >       >       disabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x0d]
>>>       lapic_id[0xff]
>>>       >       >       disabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x0e]
>>>       lapic_id[0xff]
>>>       >       >       disabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x0f]
>>>       lapic_id[0xff]
>>>       >       >       disabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x10]
>>>       lapic_id[0xff]
>>>       >       >       disabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x11]
>>>       lapic_id[0xff]
>>>       >       >       disabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x12]
>>>       lapic_id[0xff]
>>>       >       >       disabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x13]
>>>       lapic_id[0xff]
>>>       >       >       disabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x14]
>>>       lapic_id[0xff]
>>>       >       >       disabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x15]
>>>       lapic_id[0xff]
>>>       >       >       disabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x16]
>>>       lapic_id[0xff]
>>>       >       >       disabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC (acpi_id[0x17]
>>>       lapic_id[0xff]
>>>       >       >       disabled)
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x00] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x01] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x02] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x03] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x04] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x05] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x06] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x07] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x08] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x09] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x0a] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x0b] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x0c] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x0d] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x0e] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x0f] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x10] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x11] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x12] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x13] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x14] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x15] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x16] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: LAPIC_NMI 
>>> (acpi_id[0x17] high
>>>       level
>>>       >       >       lint[0x1])
>>>       >       >       >       >       >       >  ACPI: IOAPIC (id[0x08]
>>>       address[0xfec00000]
>>>       >       >       gsi_base[0])
>>>       >       >       >       >       >       >  IOAPIC[0]: apic_id 8, 
>>> version 0,
>>>       address
>>>       >       >       0xfec00000, GSI
>>>       >       >       >       0-0
>>>       >       >       >       >       >       >  ACPI: IOAPIC (id[0x09]
>>>       address[0xfec90000]
>>>       >       >       gsi_base[24])
>>>       >       >       >       >       >       >  IOAPIC[1]: apic_id 9, 
>>> version 0,
>>>       address
>>>       >       >       0xfec90000, GSI
>>>       >       >       >       24-24
>>>       >       >       >       >       >       >  ACPI: INT_SRC_OVR (bus 0 
>>> bus_irq 0
>>>       >       global_irq 2
>>>       >       >       dfl dfl)
>>>       >       >       >       >       >       >  ERROR: Unable to locate 
>>> IOAPIC for
>>>       GSI 2
>>>       >       >       >       >       >       >  ACPI: INT_SRC_OVR (bus 0 
>>> bus_irq 9
>>>       >       global_irq 9
>>>       >       >       high
>>>       >       >       >       level)
>>>       >       >       >       >       >       >  ERROR: Unable to locate 
>>> IOAPIC for
>>>       GSI 9
>>>       >       >       >       >       >       >  Using ACPI (MADT) for SMP
>>>       configuration
>>>       >       >       information
>>>       >       >       >       >       >       >  ACPI: HPET id: 0x8086a401 
>>> base:
>>>       0xfed00000
>>>       >       >       >       >       >       >  SMP: Allowing 12 CPUs, 0 
>>> hotplug
>>>       CPUs
>>>       >       >       >       >       >       >  PM: Registered nosave 
>>> memory:
>>>       >       000000000009d000 -
>>>       >       >       >       >       0000000000100000
>>>       >       >       >       >       >       >  Allocating PCI resources 
>>> starting
>>>       at
>>>       >       b0000000
>>>       >       >       (gap:
>>>       >       >       >       >       b0000000:4c000000)
>>>       >       >       >       >       >       >  Booting paravirtualized 
>>> kernel on
>>>       Xen
>>>       >       >       >       >       >       >  Xen version: 3.4.3-rc4-pre
>>>       (preserve-AD)
>>>       >       (dom0)
>>>       >       >       >       >       >       >  NR_CPUS:512 
>>> nr_cpumask_bits:512
>>>       >       nr_cpu_ids:12
>>>       >       >       >       nr_node_ids:1
>>>       >       >       >       >       >       >  PERCPU: Embedded 478 
>>> pages/cpu
>>>       >       @ffff880005ebc000
>>>       >       >       >       s1928024 r8192
>>>       >       >       >       >       d21672
>>>       >       >       >       >       >       u1957888
>>>       >       >       >       >       >       >  pcpu-alloc: s1928024 r8192 
>>> d21672
>>>       u1957888
>>>       >       >       >       alloc=478*4096
>>>       >       >       >       >       >       >  pcpu-alloc: [0] 00 [0] 01 
>>> [0] 02
>>>       [0] 03
>>>       >       [0] 04
>>>       >       >       [0] 05
>>>       >       >       >       [0] 06
>>>       >       >       >       >       [0] 07
>>>       >       >       >       >       >       >  pcpu-alloc: [0] 08 [0] 09 
>>> [0] 10
>>>       [0] 11
>>>       >       >       >       >       >       >  Xen: using vcpu_info 
>>> placement
>>>       >       >       >       >       >       >  Built 1 zonelists in Node 
>>> order,
>>>       mobility
>>>       >       >       grouping on.
>>>       >       >       >        Total
>>>       >       >       >       >       pages:
>>>       >       >       >       >       >       409291
>>>       >       >       >       >       >       >  Policy zone: DMA32
>>>       >       >       >       >       >       >  Kernel command line: ro
>>>       >       >       root=/dev/VolGroup01/LogVol00
>>>       >       >       >       >       console=hvc0
>>>       >       >       >       >       >       earlyprintk=xen nomodeset
>>>       >       >       >       >       >       >  PID hash table entries: 
>>> 4096
>>>       (order: 3,
>>>       >       32768
>>>       >       >       bytes)
>>>       >       >       >       >       >       >  Initializing CPU#0
>>>       >       >       >       >       >       >  DMA: Placing 64MB software 
>>> IO TLB
>>>       between
>>>       >       >       >       ffff880007525000 -
>>>       >       >       >       >       >       ffff88000b525000
>>>       >       >       >       >       >       >  DMA: software IO TLB at 
>>> phys
>>>       0x7525000 -
>>>       >       >       0xb525000
>>>       >       >       >       >       >       >  xen_swiotlb_fixup:
>>>       buf=ffff880007525000
>>>       >       >       size=67108864
>>>       >       >       >       >       >       >  xen_swiotlb_fixup:
>>>       buf=ffff88000b585000
>>>       >       >       size=32768
>>>       >       >       >       >       >       >  Memory: 1514268k/1683496k 
>>> available
>>>       (4654k
>>>       >       kernel
>>>       >       >       code,
>>>       >       >       >       396k
>>>       >       >       >       >       absent,
>>>       >       >       >       >       >       168832k reserved, 3443k data, 
>>> 3396k
>>>       init)
>>>       >       >       >       >       >       >  SLUB: Genslabs=14, 
>>> HWalign=64,
>>>       Order=0-3,
>>>       >       >       MinObjects=0,
>>>       >       >       >       >       CPUs=12,
>>>       >       >       >       >       >       Nodes=1
>>>       >       >       >       >       >       >  Hierarchical RCU 
>>> implementation.
>>>       >       >       >       >       >       >  NR_IRQS:4352 nr_irqs:3072
>>>       >       >       >       >       >       >  Already setup the GSI :0
>>>       >       >       >       >       >       >  Already setup the GSI :1
>>>       >       >       >       >       >       >  Already setup the GSI :2
>>>       >       >       >       >       >       >  Already setup the GSI :3
>>>       >       >       >       >       >       >  Already setup the GSI :4
>>>       >       >       >       >       >       >  Already setup the GSI :5
>>>       >       >       >       >       >       >  Already setup the GSI :6
>>>       >       >       >       >       >       >  Already setup the GSI :7
>>>       >       >       >       >       >       >  Already setup the GSI :8
>>>       >       >       >       >       >       >  Already setup the GSI :9
>>>       >       >       >       >       >       >  Already setup the GSI :10
>>>       >       >       >       >       >       >  Already setup the GSI :11
>>>       >       >       >       >       >       >  Already setup the GSI :12
>>>       >       >       >       >       >       >  Already setup the GSI :13
>>>       >       >       >       >       >       >  Already setup the GSI :14
>>>       >       >       >       >       >       >  Already setup the GSI :15
>>>       >       >       >       >       >       >  ACPI: INT_SRC_OVR (bus 0 
>>> bus_irq 0
>>>       >       global_irq 2
>>>       >       >       dfl dfl)
>>>       >       >       >       >       >       >  ACPI: INT_SRC_OVR (bus 0 
>>> bus_irq 9
>>>       >       global_irq 9
>>>       >       >       high
>>>       >       >       >       level)
>>>       >       >       >       >       >       >  xen: sci override: 
>>> source_irq=9
>>>       >       global_irq=9
>>>       >       >       trigger=c
>>>       >       >       >       >       polarity=1
>>>       >       >       >       >       >       >  xen_allocate_pirq: 
>>> returning irq 9
>>>       for gsi
>>>       >       9
>>>       >       >       >       >       >       >  Already setup the GSI :9
>>>       >       >       >       >       >       >  xen: acpi sci 9
>>>       >       >       >       >       >       >  Console: colour VGA+ 80x25
>>>       >       >       >       >       >       >  console [hvc0] enabled, 
>>> bootconsole
>>>       >       disabled
>>>       >       >       console
>>>       >       >       >       [hvc0]
>>>       >       >       >       >       enabled,
>>>       >       >       >       >       >       bootconsole disabled
>>>       >       >       >       >       >       >  Lock dependency validator:
>>>       Copyright (c)
>>>       >       2006 Red
>>>       >       >       Hat,
>>>       >       >       >       Inc.,
>>>       >       >       >       >       Ingo
>>>       >       >       >       >       >       Molnar ... 
>>> MAX_LOCKDEP_SUBCLASSES:  8
>>>       ...
>>>       >       >       MAX_LOCK_DEPTH:
>>>       >       >       >       >        48
>>>       >       >       >       >       >       ... MAX_LOCKDEP_KEYS:        
>>> 8191 ...
>>>       >       >       CLASSHASH_SIZE:
>>>       >       >       >       >        4096 ...
>>>       >       >       >       >       >       MAX_LOCKDEP_ENTRIES:     
>>> 16384 ...
>>>       >       >       MAX_LOCKDEP_CHAINS:
>>>       >       >       >        32768
>>>       >       >       >       >       ...
>>>       >       >       >       >       >       CHAINHASH_SIZE:          16384
>>>        memory used
>>>       >       by lock
>>>       >       >       >       dependency
>>>       >       >       >       >       info:
>>>       >       >       >       >       >       6367 kB  per task-struct 
>>> memory
>>>       footprint:
>>>       >       2688
>>>       >       >       bytes
>>>       >       >       >       allocated
>>>       >       >       >       >       17039360
>>>       >       >       >       >       >       bytes of page_cgroup please 
>>> try
>>>       >       >       'cgroup_disable=memory'
>>>       >       >       >       option if
>>>       >       >       >       >       you
>>>       >       >       >       >       >       don't want memory cgroups 
>>> installing
>>>       Xen
>>>       >       timer for
>>>       >       >       CPU 0
>>>       >       >       >       Detected
>>>       >       >       >       >       >       3200.206 MHz processor. 
>>> Calibrating
>>>       delay
>>>       >       loop
>>>       >       >       (skipped),
>>>       >       >       >       value
>>>       >       >       >       >       >       calculated using timer 
>>> frequency..
>>>       6400.41
>>>       >       BogoMIPS
>>>       >       >       >       (lpj=3200206)
>>>       >       >       >       >       >       Security Framework initialized
>>>       SELinux:
>>>       >       >        Initializing.
>>>       >       >       >       Dentry
>>>       >       >       >       >       cache hash
>>>       >       >       >       >       >       table entries: 262144 (order: 
>>> 9,
>>>       2097152
>>>       >       bytes)
>>>       >       >       >       Inode-cache hash
>>>       >       >       >       >       table
>>>       >       >       >       >       >       entries: 131072 (order: 8, 
>>> 1048576
>>>       bytes)
>>>       >       >       Mount-cache hash
>>>       >       >       >       table
>>>       >       >       >       >       >       entries: 256 Initializing 
>>> cgroup
>>>       subsys ns
>>>       >       >       Initializing
>>>       >       >       >       cgroup
>>>       >       >       >       >       subsys
>>>       >       >       >       >       >       cpuacct Initializing cgroup 
>>> subsys
>>>       memory
>>>       >       >       Initializing
>>>       >       >       >       cgroup
>>>       >       >       >       >       subsys
>>>       >       >       >       >       >       devices Initializing cgroup 
>>> subsys
>>>       freezer
>>>       >       >       Initializing
>>>       >       >       >       cgroup
>>>       >       >       >       >       subsys
>>>       >       >       >       >       >       net_cls CPU: L1 I cache: 32K, 
>>> L1 D
>>>       cache:
>>>       >       32K CPU:
>>>       >       >       L2
>>>       >       >       >       cache: 256K
>>>       >       >       >       >       CPU:
>>>       >       >       >       >       >       L3 cache: 12288K CPU 0/0x0 -> 
>>>  Node 0
>>>       CPU:
>>>       >       >       Unsupported
>>>       >       >       >       number of
>>>       >       >       >       >       siblings
>>>       >       >       >       >       >       32 Performance Events: 
>>> unsupported p6
>>>       CPU
>>>       >       model 44
>>>       >       >       no PMU
>>>       >       >       >       driver,
>>>       >       >       >       >       >       software events only. 
>>> lockdep: fixing
>>>       up
>>>       >       >       alternatives. SMP
>>>       >       >       >       >       alternatives:
>>>       >       >       >       >       >       switching to UP code ACPI: 
>>> Core
>>>       revision
>>>       >       20090903
>>>       >       >       ftrace:
>>>       >       >       >       >       converting
>>>       >       >       >       >       >       mcount calls to 0f 1f 44 00 00
>>>       ftrace:
>>>       >       allocating
>>>       >       >       27971
>>>       >       >       >       entries
>>>       >       >       >       >       in 110
>>>       >       >       >       >       >       pages installing Xen timer 
>>> for CPU 1
>>>       >       lockdep:
>>>       >       >       fixing up
>>>       >       >       >       >       alternatives.
>>>       >       >       >       >       >       SMP alternatives: switching 
>>> to SMP
>>>       code
>>>       >       >       Initializing CPU#1
>>>       >       >       >       CPU:
>>>       >       >       >       >       L1 I
>>>       >       >       >       >       >       cache: 32K, L1 D cache: 32K 
>>> CPU: L2
>>>       cache:
>>>       >       256K
>>>       >       >       CPU: L3
>>>       >       >       >       cache:
>>>       >       >       >       >       12288K
>>>       >       >       >       >       >       CPU 1/0x0 ->  Node 0 CPU: 
>>> Unsupported
>>>       number
>>>       >       of
>>>       >       >       siblings 32
>>>       >       >       >       >       installing
>>>       >       >       >       >       >       Xen timer for CPU 2 
>>> Initializing
>>>       CPU#2 CPU:
>>>       >       L1 I
>>>       >       >       cache:
>>>       >       >       >       32K, L1 D
>>>       >       >       >       >       cache:
>>>       >       >       >       >       >       32K CPU: L2 cache: 256K CPU: 
>>> L3
>>>       cache:
>>>       >       12288K CPU
>>>       >       >       2/0x0 ->
>>>       >       >       >       Node 0
>>>       >       >       >       >       CPU:
>>>       >       >       >       >       >       Unsupported number of 
>>> siblings 32
>>>       installing
>>>       >       Xen
>>>       >       >       timer for
>>>       >       >       >       CPU 3
>>>       >       >       >       >       >       Initializing CPU#3 CPU: L1 I 
>>> cache:
>>>       32K, L1
>>>       >       D
>>>       >       >       cache: 32K
>>>       >       >       >       CPU: L2
>>>       >       >       >       >       cache:
>>>       >       >       >       >       >       256K CPU: L3 cache: 12288K 
>>> CPU 3/0x0
>>>       ->  Node
>>>       >       0 CPU:
>>>       >       >       >       Unsupported
>>>       >       >       >       >       number
>>>       >       >       >       >       >       of siblings 32 installing Xen 
>>> timer
>>>       for CPU
>>>       >       4
>>>       >       >       Initializing
>>>       >       >       >       CPU#4
>>>       >       >       >       >       CPU: L1
>>>       >       >       >       >       >       I cache: 32K, L1 D cache: 32K 
>>> CPU: L2
>>>       cache:
>>>       >       256K
>>>       >       >       CPU: L3
>>>       >       >       >       cache:
>>>       >       >       >       >       12288K
>>>       >       >       >       >       >       CPU 4/0x0 ->  Node 0 CPU: 
>>> Unsupported
>>>       number
>>>       >       of
>>>       >       >       siblings 32
>>>       >       >       >       >       installing
>>>       >       >       >       >       >       Xen timer for CPU 5 
>>> Initializing
>>>       CPU#5 CPU:
>>>       >       L1 I
>>>       >       >       cache:
>>>       >       >       >       32K, L1 D
>>>       >       >       >       >       cache:
>>>       >       >       >       >       >       32K CPU: L2 cache: 256K CPU: 
>>> L3
>>>       cache:
>>>       >       12288K CPU
>>>       >       >       5/0x0 ->
>>>       >       >       >       Node 0
>>>       >       >       >       >       CPU:
>>>       >       >       >       >       >       Unsupported number of 
>>> siblings 32
>>>       installing
>>>       >       Xen
>>>       >       >       timer for
>>>       >       >       >       CPU 6
>>>       >       >       >       >       >       Initializing CPU#6 CPU: L1 I 
>>> cache:
>>>       32K, L1
>>>       >       D
>>>       >       >       cache: 32K
>>>       >       >       >       CPU: L2
>>>       >       >       >       >       cache:
>>>       >       >       >       >       >       256K CPU: L3 cache: 12288K 
>>> CPU 6/0x0
>>>       ->  Node
>>>       >       0 CPU:
>>>       >       >       >       Unsupported
>>>       >       >       >       >       number
>>>       >       >       >       >       >       of siblings 32 installing Xen 
>>> timer
>>>       for CPU
>>>       >       7
>>>       >       >       Initializing
>>>       >       >       >       CPU#7
>>>       >       >       >       >       CPU: L1
>>>       >       >       >       >       >       I cache: 32K, L1 D cache: 32K 
>>> CPU: L2
>>>       cache:
>>>       >       256K
>>>       >       >       CPU: L3
>>>       >       >       >       cache:
>>>       >       >       >       >       12288K
>>>       >       >       >       >       >       CPU 7/0x0 ->  Node 0 CPU: 
>>> Unsupported
>>>       number
>>>       >       of
>>>       >       >       siblings 32
>>>       >       >       >       >       installing
>>>       >       >       >       >       >       Xen timer for CPU 8 
>>> Initializing
>>>       CPU#8 CPU:
>>>       >       L1 I
>>>       >       >       cache:
>>>       >       >       >       32K, L1 D
>>>       >       >       >       >       cache:
>>>       >       >       >       >       >       32K CPU: L2 cache: 256K CPU: 
>>> L3
>>>       cache:
>>>       >       12288K CPU
>>>       >       >       8/0x0 ->
>>>       >       >       >       Node 0
>>>       >       >       >       >       CPU:
>>>       >       >       >       >       >       Unsupported number of 
>>> siblings 32
>>>       installing
>>>       >       Xen
>>>       >       >       timer for
>>>       >       >       >       CPU 9
>>>       >       >       >       >       >       Initializing CPU#9 CPU: L1 I 
>>> cache:
>>>       32K, L1
>>>       >       D
>>>       >       >       cache: 32K
>>>       >       >       >       CPU: L2
>>>       >       >       >       >       cache:
>>>       >       >       >       >       >       256K CPU: L3 cache: 12288K 
>>> CPU 9/0x0
>>>       ->  Node
>>>       >       0 CPU:
>>>       >       >       >       Unsupported
>>>       >       >       >       >       number
>>>       >       >       >       >       >       of siblings 32 installing Xen 
>>> timer
>>>       for CPU
>>>       >       10
>>>       >       >       >       Initializing
>>>       >       >       >       >       CPU#10 CPU:
>>>       >       >       >       >       >       L1 I cache: 32K, L1 D cache: 
>>> 32K CPU:
>>>       L2
>>>       >       cache:
>>>       >       >       256K CPU:
>>>       >       >       >       L3
>>>       >       >       >       >       cache:
>>>       >       >       >       >       >       12288K CPU 10/0x0 ->  Node 0 
>>> CPU:
>>>       Unsupported
>>>       >       number
>>>       >       >       of
>>>       >       >       >       siblings
>>>       >       >       >       >       32
>>>       >       >       >       >       >       installing Xen timer for CPU 
>>> 11
>>>       Initializing
>>>       >       CPU#11
>>>       >       >       CPU:
>>>       >       >       >       L1 I
>>>       >       >       >       >       cache:
>>>       >       >       >       >       >       32K, L1 D cache: 32K CPU: L2 
>>> cache:
>>>       256K
>>>       >       CPU: L3
>>>       >       >       cache:
>>>       >       >       >       12288K
>>>       >       >       >       >       CPU
>>>       >       >       >       >       >       11/0x0 ->  Node 0 CPU: 
>>> Unsupported
>>>       number of
>>>       >       >       siblings 32
>>>       >       >       >       Brought
>>>       >       >       >       >       up 12
>>>       >       >       >       >       >       CPUs Grant table initialized
>>>       regulator: core
>>>       >       >       version 0.5
>>>       >       >       >       Time:
>>>       >       >       >       >       14:45:00
>>>       >       >       >       >       >        Date: 03/16/10 NET: 
>>> Registered
>>>       protocol
>>>       >       family 16
>>>       >       >       >       >       xenbus_probe_init ok
>>>       >       >       >       >       >       ACPI FADT declares the system 
>>> doesn't
>>>       >       support PCIe
>>>       >       >       ASPM,
>>>       >       >       >       so
>>>       >       >       >       >       disable it
>>>       >       >       >       >       >       ACPI: bus type pci registered 
>>> PCI:
>>>       MCFG
>>>       >       >       configuration 0:
>>>       >       >       >       base
>>>       >       >       >       >       a0000000
>>>       >       >       >       >       >       segment 0 buses 0 - 255 PCI: 
>>> MCFG
>>>       area at
>>>       >       a0000000
>>>       >       >       >       reserved in
>>>       >       >       >       >       E820 PCI:
>>>       >       >       >       >       >       Using MMCONFIG at a0000000 - 
>>> afffffff
>>>       PCI:
>>>       >       Using
>>>       >       >       >       configuration
>>>       >       >       >       >       type 1
>>>       >       >       >       >       >       for base access bio: create 
>>> slab
>>>       <bio-0>  at
>>>       >       0 ACPI
>>>       >       >       Error:
>>>       >       >       >       Field
>>>       >       >       >       >       [CPB3]
>>>       >       >       >       >       >       at 96 exceeds Buffer [NULL] 
>>> size 64
>>>       (bits)
>>>       >       >       >       >       (20090903/dsopcode-596) ACPI
>>>       >       >       >       >       >       Error (psparse-0537): Method
>>>       parse/execution
>>>       >       failed
>>>       >       >       >       [\_SB_._OSC]
>>>       >       >       >       >       (Node
>>>       >       >       >       >       >       ffff880064e00c98),
>>>       AE_AML_BUFFER_LIMIT ACPI:
>>>       >       >       Interpreter
>>>       >       >       >       enabled
>>>       >       >       >       >       ACPI:
>>>       >       >       >       >       >       (supports S0 S1 S3 S4 S5) 
>>> ACPI: Using
>>>       IOAPIC
>>>       >       for
>>>       >       >       interrupt
>>>       >       >       >       >       routing ACPI
>>>       >       >       >       >       >       Warning: Incorrect checksum 
>>> in table
>>>       [    ]
>>>       >       - 97,
>>>       >       >       should
>>>       >       >       >       be DB
>>>       >       >       >       >       >       (20090903/tbutils-314) ACPI: 
>>> No dock
>>>       devices
>>>       >       found.
>>>       >       >       ACPI:
>>>       >       >       >       PCI
>>>       >       >       >       >       Root
>>>       >       >       >       >       >       Bridge [PCI0] (0000:00) pci
>>>       0000:00:01.0:
>>>       >       PME#
>>>       >       >       supported
>>>       >       >       >       from D0
>>>       >       >       >       >       D3hot
>>>       >       >       >       >       >       D3cold pci 0000:00:01.0: PME#
>>>       disabled pci
>>>       >       >       0000:00:02.0:
>>>       >       >       >       PME#
>>>       >       >       >       >       supported
>>>       >       >       >       >       >       from D0 D3hot D3cold pci
>>>       0000:00:02.0: PME#
>>>       >       >       disabled pci
>>>       >       >       >       >       0000:00:03.0:
>>>       >       >       >       >       >       PME# supported from D0 D3hot 
>>> D3cold
>>>       pci
>>>       >       >       0000:00:03.0: PME#
>>>       >       >       >       >       disabled pci
>>>       >       >       >       >       >       0000:00:04.0: PME# supported 
>>> from D0
>>>       D3hot
>>>       >       D3cold
>>>       >       >       pci
>>>       >       >       >       >       0000:00:04.0: PME#
>>>       >       >       >       >       >       disabled pci 0000:00:05.0: 
>>> PME#
>>>       supported
>>>       >       from D0
>>>       >       >       D3hot
>>>       >       >       >       D3cold
>>>       >       >       >       >       pci
>>>       >       >       >       >       >       0000:00:05.0: PME# disabled 
>>> pci
>>>       >       0000:00:06.0: PME#
>>>       >       >       >       supported from
>>>       >       >       >       >       D0
>>>       >       >       >       >       >       D3hot D3cold pci 
>>> 0000:00:06.0: PME#
>>>       disabled
>>>       >       pci
>>>       >       >       >       0000:00:07.0:
>>>       >       >       >       >       PME#
>>>       >       >       >       >       >       supported from D0 D3hot 
>>> D3cold pci
>>>       >       0000:00:07.0:
>>>       >       >       PME#
>>>       >       >       >       disabled
>>>       >       >       >       >       pci
>>>       >       >       >       >       >       0000:00:08.0: PME# supported 
>>> from D0
>>>       D3hot
>>>       >       D3cold
>>>       >       >       pci
>>>       >       >       >       >       0000:00:08.0: PME#
>>>       >       >       >       >       >       disabled pci 0000:00:09.0: 
>>> PME#
>>>       supported
>>>       >       from D0
>>>       >       >       D3hot
>>>       >       >       >       D3cold
>>>       >       >       >       >       pci
>>>       >       >       >       >       >       0000:00:09.0: PME# disabled 
>>> pci
>>>       >       0000:00:0a.0: PME#
>>>       >       >       >       supported from
>>>       >       >       >       >       D0
>>>       >       >       >       >       >       D3hot D3cold pci 
>>> 0000:00:0a.0: PME#
>>>       disabled
>>>       >       pci
>>>       >       >       >       0000:00:13.0:
>>>       >       >       >       >       PME#
>>>       >       >       >       >       >       supported from D0 D3hot 
>>> D3cold pci
>>>       >       0000:00:13.0:
>>>       >       >       PME#
>>>       >       >       >       disabled
>>>       >       >       >       >       pci
>>>       >       >       >       >       >       0000:00:1a.7: PME# supported 
>>> from D0
>>>       D3hot
>>>       >       D3cold
>>>       >       >       pci
>>>       >       >       >       >       0000:00:1a.7: PME#
>>>       >       >       >       >       >       disabled pci 0000:00:1c.0: 
>>> PME#
>>>       supported
>>>       >       from D0
>>>       >       >       D3hot
>>>       >       >       >       D3cold
>>>       >       >       >       >       pci
>>>       >       >       >       >       >       0000:00:1c.0: PME# disabled 
>>> pci
>>>       >       0000:00:1c.4: PME#
>>>       >       >       >       supported from
>>>       >       >       >       >       D0
>>>       >       >       >       >       >       D3hot D3cold pci 
>>> 0000:00:1c.4: PME#
>>>       disabled
>>>       >       pci
>>>       >       >       >       0000:00:1c.5:
>>>       >       >       >       >       PME#
>>>       >       >       >       >       >       supported from D0 D3hot 
>>> D3cold pci
>>>       >       0000:00:1c.5:
>>>       >       >       PME#
>>>       >       >       >       disabled
>>>       >       >       >       >       pci
>>>       >       >       >       >       >       0000:00:1d.7: PME# supported 
>>> from D0
>>>       D3hot
>>>       >       D3cold
>>>       >       >       pci
>>>       >       >       >       >       0000:00:1d.7: PME#
>>>       >       >       >       >       >       disabled pci 0000:00:1f.0: 
>>> quirk:
>>>       region
>>>       >       0400-047f
>>>       >       >       claimed
>>>       >       >       >       by
>>>       >       >       >       >       ICH6
>>>       >       >       >       >       >       ACPI/GPIO/TCO pci 
>>> 0000:00:1f.0:
>>>       quirk:
>>>       >       region
>>>       >       >       0500-053f
>>>       >       >       >       claimed
>>>       >       >       >       >       by ICH6
>>>       >       >       >       >       >       GPIO pci 0000:00:1f.0: ICH7 
>>> LPC
>>>       Generic IO
>>>       >       decode 1
>>>       >       >       PIO at
>>>       >       >       >       0680
>>>       >       >       >       >       (mask
>>>       >       >       >       >       >       000f) pci 0000:00:1f.0: ICH7 
>>> LPC
>>>       Generic IO
>>>       >       decode
>>>       >       >       2 PIO
>>>       >       >       >       at 0ca0
>>>       >       >       >       >       (mask
>>>       >       >       >       >       >       000f) pci 0000:00:1f.0: ICH7 
>>> LPC
>>>       Generic IO
>>>       >       decode
>>>       >       >       3 PIO
>>>       >       >       >       at 0600
>>>       >       >       >       >       (mask
>>>       >       >       >       >       >       001f) pci 0000:00:1f.2: PME#
>>>       supported from
>>>       >       D3hot
>>>       >       >       pci
>>>       >       >       >       >       0000:00:1f.2: PME#
>>>       >       >       >       >       >       disabled pci 0000:01:00.0: 
>>> PME#
>>>       supported
>>>       >       from D0
>>>       >       >       D3hot
>>>       >       >       >       D3cold
>>>       >       >       >       >       pci
>>>       >       >       >       >       >       0000:01:00.0: PME# disabled 
>>> pci
>>>       >       0000:01:00.1: PME#
>>>       >       >       >       supported from
>>>       >       >       >       >       D0
>>>       >       >       >       >       >       D3hot D3cold pci 
>>> 0000:01:00.1: PME#
>>>       disabled
>>>       >       pci
>>>       >       >       >       0000:0c:00.0:
>>>       >       >       >       >       disabling
>>>       >       >       >       >       >       ASPM on pre-1.1 PCIe device.  
>>> You can
>>>       enable
>>>       >       it
>>>       >       >       with
>>>       >       >       >       >       'pcie_aspm=force'
>>>       >       >       >       >       >       pci 0000:00:1e.0: transparent 
>>> bridge
>>>       ACPI:
>>>       >       PCI Root
>>>       >       >       Bridge
>>>       >       >       >       [PCI1]
>>>       >       >       >       >       >       (0000:fe) ACPI: PCI Root 
>>> Bridge
>>>       [PCI2]
>>>       >       (0000:ff)
>>>       >       >       ACPI: PCI
>>>       >       >       >       >       Interrupt
>>>       >       >       >       >       >       Link [LNKA] (IRQs 3 4 5 6 7 9 
>>> 10 *11
>>>       12 14
>>>       >       15)
>>>       >       >       ACPI: PCI
>>>       >       >       >       >       Interrupt Link
>>>       >       >       >       >       >       [LNKB] (IRQs 3 4 5 6 7 9 *10 
>>> 11 12 14
>>>       15)
>>>       >       ACPI: PCI
>>>       >       >       >       Interrupt
>>>       >       >       >       >       Link
>>>       >       >       >       >       >       [LNKC] (IRQs 3 4 5 6 7 *9 10 
>>> 11 12 14
>>>       15)
>>>       >       ACPI: PCI
>>>       >       >       >       Interrupt
>>>       >       >       >       >       Link
>>>       >       >       >       >       >       [LNKD] (IRQs 3 4 *5 6 7 9 10 
>>> 11 12 14
>>>       15)
>>>       >       ACPI: PCI
>>>       >       >       >       Interrupt
>>>       >       >       >       >       Link
>>>       >       >       >       >       >       [LNKE] (IRQs 3 4 5 6 7 9 10 
>>> 11 12 14
>>>       15) *0,
>>>       >       >       disabled.
>>>       >       >       >       ACPI: PCI
>>>       >       >       >       >       >       Interrupt Link [LNKF] (IRQs 3 
>>> 4 5 6 7
>>>       9 10
>>>       >       *11 12
>>>       >       >       14 15)
>>>       >       >       >       ACPI:
>>>       >       >       >       >       PCI
>>>       >       >       >       >       >       Interrupt Link [LNKG] (IRQs 3 
>>> 4 5 6 7
>>>       9 10
>>>       >       11 12 14
>>>       >       >       15)
>>>       >       >       >       *0,
>>>       >       >       >       >       disabled.
>>>       >       >       >       >       >       ACPI: PCI Interrupt Link 
>>> [LNKH] (IRQs
>>>       3 4 5
>>>       >       6 7 9
>>>       >       >       *10 11
>>>       >       >       >       12 14
>>>       >       >       >       >       15)
>>>       >       >       >       >       >       xenbus_probe_backend_init bus
>>>       registered ok
>>>       >       >       >       >       xenbus_probe_frontend_init
>>>       >       >       >       >       >       bus registered ok xen_balloon:
>>>       Initialising
>>>       >       balloon
>>>       >       >       driver
>>>       >       >       >       with
>>>       >       >       >       >       page
>>>       >       >       >       >       >       order 0. vgaarb: device added:
>>>       >       >       >       >       >
>>>       >       >        
>>> PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
>>>       >       >       >       vgaarb:
>>>       >       >       >       >       loaded
>>>       >       >       >       >       >       SCSI subsystem initialized 
>>> usbcore:
>>>       >       registered new
>>>       >       >       >       interface
>>>       >       >       >       >       driver
>>>       >       >       >       >       >       usbfs usbcore: registered new
>>>       interface
>>>       >       driver hub
>>>       >       >       >       usbcore:
>>>       >       >       >       >       registered
>>>       >       >       >       >       >       new device driver usb PCI: 
>>> Using ACPI
>>>       for
>>>       >       IRQ
>>>       >       >       routing
>>>       >       >       >       NetLabel:
>>>       >       >       >       >       >       Initializing NetLabel:  
>>> domain hash
>>>       size =
>>>       >       128
>>>       >       >       NetLabel:
>>>       >       >       >       >        protocols =
>>>       >       >       >       >       >       UNLABELED CIPSOv4 NetLabel:
>>>        unlabeled
>>>       >       traffic
>>>       >       >       allowed by
>>>       >       >       >       default
>>>       >       >       >       >       >       Switching to clocksource xen 
>>> kstop/0
>>>       used
>>>       >       greatest
>>>       >       >       stack
>>>       >       >       >       depth:
>>>       >       >       >       >       6568
>>>       >       >       >       >       >       bytes left kstop/1 used 
>>> greatest
>>>       stack
>>>       >       depth: 6536
>>>       >       >       bytes
>>>       >       >       >       left
>>>       >       >       >       >       pnp: PnP
>>>       >       >       >       >       >       ACPI init ACPI: bus type pnp
>>>       registered
>>>       >       >       xen_allocate_pirq:
>>>       >       >       >       >       returning irq
>>>       >       >       >       >       >       8 for gsi 8 Already setup the 
>>> GSI :8
>>>       >       >       xen_allocate_pirq:
>>>       >       >       >       returning
>>>       >       >       >       >       irq 13
>>>       >       >       >       >       >       for gsi 13 Already setup the 
>>> GSI :13
>>>       pnp:
>>>       >       PnP ACPI:
>>>       >       >       found
>>>       >       >       >       13
>>>       >       >       >       >       devices
>>>       >       >       >       >       >       ACPI: ACPI bus type pnp 
>>> unregistered
>>>       system
>>>       >       00:07:
>>>       >       >       ioport
>>>       >       >       >       range
>>>       >       >       >       >       >       0x500-0x53f has been reserved 
>>> system
>>>       00:07:
>>>       >       ioport
>>>       >       >       range
>>>       >       >       >       >       0x400-0x47f has
>>>       >       >       >       >       >       been reserved system 00:07: 
>>> ioport
>>>       range
>>>       >       >       0x800-0x81f has
>>>       >       >       >       been
>>>       >       >       >       >       reserved
>>>       >       >       >       >       >       system 00:07: ioport range
>>>       0x2f8-0x2ff has
>>>       >       been
>>>       >       >       reserved
>>>       >       >       >       system
>>>       >       >       >       >       00:07:
>>>       >       >       >       >       >       iomem range 
>>> 0xfed1c000-0xfed8bffe
>>>       could not
>>>       >       be
>>>       >       >       reserved
>>>       >       >       >       system
>>>       >       >       >       >       00:07:
>>>       >       >       >       >       >       iomem range 
>>> 0xff000000-0xffffffff
>>>       could not
>>>       >       be
>>>       >       >       reserved
>>>       >       >       >       system
>>>       >       >       >       >       00:07:
>>>       >       >       >       >       >       iomem range 
>>> 0xfee00000-0xfeefffff has
>>>       been
>>>       >       reserved
>>>       >       >       system
>>>       >       >       >       00:07:
>>>       >       >       >       >       iomem
>>>       >       >       >       >       >       range 0xfe900000-0xfe90001f 
>>> has been
>>>       >       reserved
>>>       >       >       system
>>>       >       >       >       00:07: iomem
>>>       >       >       >       >       range
>>>       >       >       >       >       >       0xfea00000-0xfea0001f has been
>>>       reserved
>>>       >       system
>>>       >       >       00:07:
>>>       >       >       >       iomem range
>>>       >       >       >       >       >       0xfed1b000-0xfed1bfff has been
>>>       reserved pci
>>>       >       >       0000:0c:00.0:
>>>       >       >       >       BAR 6:
>>>       >       >       >       >       no
>>>       >       >       >       >       >       parent found for of device
>>>       >       [0xffff0000-0xffffffff]
>>>       >       >       pci
>>>       >       >       >       >       0000:00:01.0: PCI
>>>       >       >       >       >       >       bridge, secondary bus 0000:01 
>>> pci
>>>       >       0000:00:01.0:
>>>       >       >       IO
>>>       >       >       >       window:
>>>       >       >       >       >       >       0x1000-0x1fff pci 
>>> 0000:00:01.0:   MEM
>>>       >       window:
>>>       >       >       >       >       0xb1900000-0xb19fffff pci
>>>       >       >       >       >       >       0000:00:01.0:   PREFETCH 
>>> window:
>>>       disabled
>>>       >       pci
>>>       >       >       >       0000:00:02.0: PCI
>>>       >       >       >       >       bridge,
>>>       >       >       >       >       >       secondary bus 0000:02 pci
>>>       0000:00:02.0:   IO
>>>       >       >       window:
>>>       >       >       >       disabled pci
>>>       >       >       >       >       >       0000:00:02.0:   MEM window: 
>>> disabled
>>>       pci
>>>       >       >       0000:00:02.0:
>>>       >       >       >       PREFETCH
>>>       >       >       >       >       >       window: disabled pci 
>>> 0000:00:03.0:
>>>       PCI
>>>       >       bridge,
>>>       >       >       secondary
>>>       >       >       >       bus
>>>       >       >       >       >       0000:03 pci
>>>       >       >       >       >       >       0000:00:03.0:   IO window: 
>>> disabled
>>>       pci
>>>       >       >       0000:00:03.0:
>>>       >       >       >       MEM
>>>       >       >       >       >       window:
>>>       >       >       >       >       >       disabled pci 0000:00:03.0:   
>>> PREFETCH
>>>       >       window:
>>>       >       >       disabled pci
>>>       >       >       >       >       0000:00:04.0:
>>>       >       >       >       >       >       PCI bridge, secondary bus 
>>> 0000:04 pci
>>>       >       0000:00:04.0:
>>>       >       >         IO
>>>       >       >       >       window:
>>>       >       >       >       >       >       disabled pci 0000:00:04.0:   
>>> MEM
>>>       window:
>>>       >       disabled
>>>       >       >       pci
>>>       >       >       >       >       0000:00:04.0:
>>>       >       >       >       >       >       PREFETCH window: disabled pci
>>>       0000:00:05.0:
>>>       >       PCI
>>>       >       >       bridge,
>>>       >       >       >       secondary
>>>       >       >       >       >       bus
>>>       >       >       >       >       >       0000:05 pci 0000:00:05.0:   IO
>>>       window:
>>>       >       disabled pci
>>>       >       >       >       0000:00:05.0:
>>>       >       >       >       >         MEM
>>>       >       >       >       >       >       window: disabled pci 
>>> 0000:00:05.0:
>>>       >       PREFETCH
>>>       >       >       window:
>>>       >       >       >       disabled
>>>       >       >       >       >       pci
>>>       >       >       >       >       >       0000:00:06.0: PCI bridge, 
>>> secondary
>>>       bus
>>>       >       0000:06 pci
>>>       >       >       >       0000:00:06.0:
>>>       >       >       >       >         IO
>>>       >       >       >       >       >       window: disabled pci 
>>> 0000:00:06.0:
>>>       MEM
>>>       >       window:
>>>       >       >       disabled
>>>       >       >       >       pci
>>>       >       >       >       >       >       0000:00:06.0:   PREFETCH 
>>> window:
>>>       disabled
>>>       >       pci
>>>       >       >       >       0000:00:07.0: PCI
>>>       >       >       >       >       bridge,
>>>       >       >       >       >       >       secondary bus 0000:07 pci
>>>       0000:00:07.0:   IO
>>>       >       >       window:
>>>       >       >       >       disabled pci
>>>       >       >       >       >       >       0000:00:07.0:   MEM window: 
>>> disabled
>>>       pci
>>>       >       >       0000:00:07.0:
>>>       >       >       >       PREFETCH
>>>       >       >       >       >       >       window: disabled pci 
>>> 0000:00:08.0:
>>>       PCI
>>>       >       bridge,
>>>       >       >       secondary
>>>       >       >       >       bus
>>>       >       >       >       >       0000:08 pci
>>>       >       >       >       >       >       0000:00:08.0:   IO window: 
>>> disabled
>>>       pci
>>>       >       >       0000:00:08.0:
>>>       >       >       >       MEM
>>>       >       >       >       >       window:
>>>       >       >       >       >       >       disabled pci 0000:00:08.0:   
>>> PREFETCH
>>>       >       window:
>>>       >       >       disabled pci
>>>       >       >       >       >       0000:00:09.0:
>>>       >       >       >       >       >       PCI bridge, secondary bus 
>>> 0000:09 pci
>>>       >       0000:00:09.0:
>>>       >       >         IO
>>>       >       >       >       window:
>>>       >       >       >       >       >       0x3000-0x3fff pci 
>>> 0000:00:09.0:   MEM
>>>       >       window:
>>>       >       >       >       >       0xb1b00000-0xb1cfffff pci
>>>       >       >       >       >       >       0000:00:09.0:   PREFETCH 
>>> window:
>>>       >       >       >       >       0x000000b1d00000-0x000000b1efffff pci
>>>       >       >       >       >       >       0000:00:0a.0: PCI bridge, 
>>> secondary
>>>       bus
>>>       >       0000:0a pci
>>>       >       >       >       0000:00:0a.0:
>>>       >       >       >       >         IO
>>>       >       >       >       >       >       window: disabled pci 
>>> 0000:00:0a.0:
>>>       MEM
>>>       >       window:
>>>       >       >       disabled
>>>       >       >       >       pci
>>>       >       >       >       >       >       0000:00:0a.0:   PREFETCH 
>>> window:
>>>       disabled
>>>       >       pci
>>>       >       >       >       0000:00:1c.0: PCI
>>>       >       >       >       >       bridge,
>>>       >       >       >       >       >       secondary bus 0000:0b pci
>>>       0000:00:1c.0:   IO
>>>       >       >       window:
>>>       >       >       >       disabled pci
>>>       >       >       >       >       >       0000:00:1c.0:   MEM window: 
>>> disabled
>>>       pci
>>>       >       >       0000:00:1c.0:
>>>       >       >       >       PREFETCH
>>>       >       >       >       >       >       window: disabled pci 
>>> 0000:00:1c.4:
>>>       PCI
>>>       >       bridge,
>>>       >       >       secondary
>>>       >       >       >       bus
>>>       >       >       >       >       0000:0c pci
>>>       >       >       >       >       >       0000:00:1c.4:   IO window: 
>>> disabled
>>>       pci
>>>       >       >       0000:00:1c.4:
>>>       >       >       >       MEM
>>>       >       >       >       >       window:
>>>       >       >       >       >       >       0xb1000000-0xb18fffff pci
>>>       0000:00:1c.4:
>>>       >       PREFETCH
>>>       >       >       window:
>>>       >       >       >       >       >       
>>> 0x000000b0000000-0x000000b0ffffff pci
>>>       >       0000:00:1c.5:
>>>       >       >       PCI
>>>       >       >       >       bridge,
>>>       >       >       >       >       >       secondary bus 0000:0d pci
>>>       0000:00:1c.5:   IO
>>>       >       >       window:
>>>       >       >       >       disabled pci
>>>       >       >       >       >       >       0000:00:1c.5:   MEM window: 
>>> disabled
>>>       pci
>>>       >       >       0000:00:1c.5:
>>>       >       >       >       PREFETCH
>>>       >       >       >       >       >       window: disabled pci 
>>> 0000:00:1e.0:
>>>       PCI
>>>       >       bridge,
>>>       >       >       secondary
>>>       >       >       >       bus
>>>       >       >       >       >       0000:0e pci
>>>       >       >       >       >       >       0000:00:1e.0:   IO window: 
>>> disabled
>>>       pci
>>>       >       >       0000:00:1e.0:
>>>       >       >       >       MEM
>>>       >       >       >       >       window:
>>>       >       >       >       >       >       disabled pci 0000:00:1e.0:   
>>> PREFETCH
>>>       >       window:
>>>       >       >       disabled pci
>>>       >       >       >       >       0000:00:01.0:
>>>       >       >       >       >       >       PCI INT A ->  GSI 28 (level, 
>>> low) ->
>>>       IRQ 28
>>>       >       pci
>>>       >       >       >       0000:00:02.0: PCI
>>>       >       >       >       >       INT A
>>>       >       >       >       >       >       ->  GSI 29 (level, low) ->  
>>> IRQ 29 pci
>>>       >       0000:00:03.0:
>>>       >       >       PCI INT
>>>       >       >       >       A ->
>>>       >       >       >       >       GSI 24
>>>       >       >       >       >       >       (level, low) ->  IRQ 24 pci
>>>       0000:00:04.0: PCI
>>>       >       INT A
>>>       >       >       ->  GSI
>>>       >       >       >       25
>>>       >       >       >       >       (level,
>>>       >       >       >       >       >       low) ->  IRQ 25 pci 
>>> 0000:00:05.0: PCI
>>>       INT A
>>>       >       ->  GSI
>>>       >       >       26
>>>       >       >       >       (level, low)
>>>       >       >       >       >       ->  IRQ
>>>       >       >       >       >       >       26 pci 0000:00:06.0: PCI INT 
>>> A ->  GSI
>>>       27
>>>       >       (level,
>>>       >       >       low) ->
>>>       >       >       >       IRQ 27
>>>       >       >       >       >       pci
>>>       >       >       >       >       >       0000:00:07.0: PCI INT A ->  
>>> GSI 30
>>>       (level,
>>>       >       low) ->
>>>       >       >       IRQ 30
>>>       >       >       >       pci
>>>       >       >       >       >       >       0000:00:08.0: PCI INT A ->  
>>> GSI 31
>>>       (level,
>>>       >       low) ->
>>>       >       >       IRQ 31
>>>       >       >       >       pci
>>>       >       >       >       >       >       0000:00:09.0: PCI INT A ->  
>>> GSI 32
>>>       (level,
>>>       >       low) ->
>>>       >       >       IRQ 32
>>>       >       >       >       pci
>>>       >       >       >       >       >       0000:00:0a.0: PCI INT A ->  
>>> GSI 33
>>>       (level,
>>>       >       low) ->
>>>       >       >       IRQ 33
>>>       >       >       >       pci
>>>       >       >       >       >       >       0000:00:1c.0: PCI INT A ->  
>>> GSI 16
>>>       (level,
>>>       >       low) ->
>>>       >       >       IRQ 16
>>>       >       >       >       >       >       xen_allocate_pirq: returning 
>>> irq 16
>>>       for gsi
>>>       >       16
>>>       >       >       Already
>>>       >       >       >       setup the
>>>       >       >       >       >       GSI :16
>>>       >       >       >       >       >       pci 0000:00:1c.4: PCI INT A 
>>> ->  GSI 16
>>>       >       (level, low)
>>>       >       >       ->  IRQ
>>>       >       >       >       16 pci
>>>       >       >       >       >       >       0000:00:1c.5: PCI INT B ->  
>>> GSI 17
>>>       (level,
>>>       >       low) ->
>>>       >       >       IRQ 17
>>>       >       >       >       NET:
>>>       >       >       >       >       Registered
>>>       >       >       >       >       >       protocol family 2 IP route 
>>> cache hash
>>>       table
>>>       >       >       entries: 65536
>>>       >       >       >       >       (order: 7,
>>>       >       >       >       >       >       524288 bytes) TCP established 
>>> hash
>>>       table
>>>       >       entries:
>>>       >       >       262144
>>>       >       >       >       (order:
>>>       >       >       >       >       10,
>>>       >       >       >       >       >       4194304 bytes) TCP bind hash 
>>> table
>>>       entries:
>>>       >       65536
>>>       >       >       (order:
>>>       >       >       >       10,
>>>       >       >       >       >       4718592
>>>       >       >       >       >       >       bytes) TCP: Hash tables 
>>> configured
>>>       >       (established
>>>       >       >       262144
>>>       >       >       >       bind
>>>       >       >       >       >       65536) TCP
>>>       >       >       >       >       >       reno registered NET: 
>>> Registered
>>>       protocol
>>>       >       family 1
>>>       >       >       pci
>>>       >       >       >       >       0000:01:00.0:
>>>       >       >       >       >       >       Disabling L0s pci 
>>> 0000:01:00.1:
>>>       Disabling
>>>       >       L0s
>>>       >       >       Trying to
>>>       >       >       >       unpack
>>>       >       >       >       >       rootfs
>>>       >       >       >       >       >       image as initramfs... Freeing 
>>> initrd
>>>       memory:
>>>       >       6474k
>>>       >       >       freed
>>>       >       >       >       DMA-API:
>>>       >       >       >       >       >       preallocated 32768 debug 
>>> entries
>>>       DMA-API:
>>>       >       debugging
>>>       >       >       >       enabled by
>>>       >       >       >       >       kernel
>>>       >       >       >       >       >       config PCI-DMA: Using 
>>> software bounce
>>>       >       buffering for
>>>       >       >       IO
>>>       >       >       >       (SWIOTLB)
>>>       >       >       >       >       DMA:
>>>       >       >       >       >       >       Placing 64MB software IO TLB 
>>> between
>>>       >       >       ffff880007525000 -
>>>       >       >       >       >       ffff88000b525000
>>>       >       >       >       >       >       DMA: software IO TLB at phys
>>>       0x7525000 -
>>>       >       0xb525000
>>>       >       >       audit:
>>>       >       >       >       >       initializing
>>>       >       >       >       >       >       netlink socket (disabled) 
>>> type=2000
>>>       >       >       >       audit(1268750702.035:1):
>>>       >       >       >       >       initialized
>>>       >       >       >       >       >       HugeTLB registered 2 MB page 
>>> size,
>>>       >       pre-allocated 0
>>>       >       >       pages
>>>       >       >       >       VFS:
>>>       >       >       >       >       Disk
>>>       >       >       >       >       >       quotas dquot_6.5.2 
>>> Dquot-cache hash
>>>       table
>>>       >       entries:
>>>       >       >       512
>>>       >       >       >       (order 0,
>>>       >       >       >       >       4096
>>>       >       >       >       >       >       bytes) msgmni has been set to 
>>> 2970
>>>       >       cryptomgr_test
>>>       >       >       used
>>>       >       >       >       greatest
>>>       >       >       >       >       stack
>>>       >       >       >       >       >       depth: 5864 bytes left 
>>> cryptomgr_test
>>>       used
>>>       >       greatest
>>>       >       >       stack
>>>       >       >       >       depth:
>>>       >       >       >       >       5816
>>>       >       >       >       >       >       bytes left alg: No test for 
>>> stdrng
>>>       (krng)
>>>       >       Block
>>>       >       >       layer SCSI
>>>       >       >       >       >       generic (bsg)
>>>       >       >       >       >       >       driver version 0.4 loaded 
>>> (major 252)
>>>       io
>>>       >       scheduler
>>>       >       >       noop
>>>       >       >       >       >       registered io
>>>       >       >       >       >       >       scheduler anticipatory 
>>> registered io
>>>       >       scheduler
>>>       >       >       deadline
>>>       >       >       >       >       registered io
>>>       >       >       >       >       >       scheduler cfq registered 
>>> (default)
>>>       >       pci_hotplug: PCI
>>>       >       >       Hot
>>>       >       >       >       Plug PCI
>>>       >       >       >       >       Core
>>>       >       >       >       >       >       version: 0.5 pciehp
>>>       0000:00:09.0:pcie04: HPC
>>>       >       >       vendor_id
>>>       >       >       >       8086
>>>       >       >       >       >       device_id
>>>       >       >       >       >       >       3410 ss_vid 0 ss_did 0 
>>> pciehp: PCI
>>>       Express
>>>       >       Hot Plug
>>>       >       >       >       Controller
>>>       >       >       >       >       Driver
>>>       >       >       >       >       >       version: 0.4 acpiphp: ACPI 
>>> Hot Plug
>>>       PCI
>>>       >       Controller
>>>       >       >       Driver
>>>       >       >       >       >       version: 0.5
>>>       >       >       >       >       >       acpiphp_glue: Slot 2 already
>>>       registered by
>>>       >       another
>>>       >       >       hotplug
>>>       >       >       >       driver
>>>       >       >       >       >       >       acpiphp_glue: Slot 2 already
>>>       registered by
>>>       >       another
>>>       >       >       hotplug
>>>       >       >       >       driver
>>>       >       >       >       >       >       acpiphp_glue: Slot 2 already
>>>       registered by
>>>       >       another
>>>       >       >       hotplug
>>>       >       >       >       driver
>>>       >       >       >       >       >       acpiphp_glue: Slot 2 already
>>>       registered by
>>>       >       another
>>>       >       >       hotplug
>>>       >       >       >       driver
>>>       >       >       >       >       >       acpiphp_glue: Slot 2 already
>>>       registered by
>>>       >       another
>>>       >       >       hotplug
>>>       >       >       >       driver
>>>       >       >       >       >       >       acpiphp_glue: Slot 2 already
>>>       registered by
>>>       >       another
>>>       >       >       hotplug
>>>       >       >       >       driver
>>>       >       >       >       >       >       acpiphp_glue: Slot 2 already
>>>       registered by
>>>       >       another
>>>       >       >       hotplug
>>>       >       >       >       driver
>>>       >       >       >       >       >       acpiphp_glue: Slot 2 already
>>>       registered by
>>>       >       another
>>>       >       >       hotplug
>>>       >       >       >       driver
>>>       >       >       >       >       >       pci-stub: invalid id string 
>>> "" input:
>>>       Sleep
>>>       >       Button
>>>       >       >       as
>>>       >       >       >       >       >
>>>       >       >        
>>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
>>>       >       >       >       ACPI:
>>>       >       >       >       >       Sleep
>>>       >       >       >       >       >       Button [SLPB] input: Power 
>>> Button as
>>>       >       >       >       >       >
>>>       >        /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI:
>>>       >       >       Power
>>>       >       >       >       Button
>>>       >       >       >       >       [PWRF]
>>>       >       >       >       >       >       registering netback 
>>> hpet_acpi_add: no
>>>       >       address or
>>>       >       >       irqs in
>>>       >       >       >       _CRS
>>>       >       >       >       >       >       Non-volatile memory driver 
>>> v1.3 Linux
>>>       >       agpgart
>>>       >       >       interface
>>>       >       >       >       v0.103
>>>       >       >       >       >       Serial:
>>>       >       >       >       >       >       8250/16550 driver, 4 ports, 
>>> IRQ
>>>       sharing
>>>       >       enabled
>>>       >       >       >       serial8250: ttyS1
>>>       >       >       >       >       at I/O
>>>       >       >       >       >       >       0x2f8 (irq = 3) is a 16550A 
>>> brd:
>>>       module
>>>       >       loaded
>>>       >       >       loop:
>>>       >       >       >       module
>>>       >       >       >       >       loaded
>>>       >       >       >       >       >       input: Macintosh mouse button
>>>       emulation as
>>>       >       >       >       >       /devices/virtual/input/input2
>>>       >       >       >       >       >       ahci 0000:00:1f.2: PCI INT A 
>>> ->  GSI
>>>       19
>>>       >       (level, low)
>>>       >       >       ->  IRQ
>>>       >       >       >       19
>>>       >       >       >       >       ahci
>>>       >       >       >       >       >       0000:00:1f.2: AHCI 0001.0200 
>>> 32 slots
>>>       6
>>>       >       ports 3
>>>       >       >       Gbps 0x3f
>>>       >       >       >       impl
>>>       >       >       >       >       SATA mode
>>>       >       >       >       >       >       ahci 0000:00:1f.2: flags: 
>>> 64bit ncq
>>>       sntf pm
>>>       >       led clo
>>>       >       >       pio
>>>       >       >       >       slum part
>>>       >       >       >       >       ccc
>>>       >       >       >       >       >       ems  scsi0 : ahci scsi1 : 
>>> ahci scsi2
>>>       : ahci
>>>       >       scsi3 :
>>>       >       >       ahci
>>>       >       >       >       scsi4 :
>>>       >       >       >       >       ahci
>>>       >       >       >       >       >       scsi5 : ahci ata1: SATA max 
>>> UDMA/133
>>>       >       irq_stat
>>>       >       >       0x00400040,
>>>       >       >       >       >       connection
>>>       >       >       >       >       >       status changed irq 2996 ata2: 
>>> SATA
>>>       max
>>>       >       UDMA/133
>>>       >       >       abar
>>>       >       >       >       >       m2048@0xb1a00000
>>>       >       >       >       >       >       port 0xb1a00180 irq 2996 
>>> ata3: SATA
>>>       max
>>>       >       UDMA/133
>>>       >       >       abar
>>>       >       >       >       >       m2048@0xb1a00000
>>>       >       >       >       >       >       port 0xb1a00200 irq 2996 
>>> ata4: SATA
>>>       max
>>>       >       UDMA/133
>>>       >       >       abar
>>>       >       >       >       >       m2048@0xb1a00000
>>>       >       >       >       >       >       port 0xb1a00280 irq 2996 
>>> ata5: SATA
>>>       max
>>>       >       UDMA/133
>>>       >       >       abar
>>>       >       >       >       >       m2048@0xb1a00000
>>>       >       >       >       >       >       port 0xb1a00300 irq 2996 
>>> ata6: SATA
>>>       max
>>>       >       UDMA/133
>>>       >       >       abar
>>>       >       >       >       >       m2048@0xb1a00000
>>>       >       >       >       >       >       port 0xb1a00380 irq 2996 
>>> Fixed MDIO
>>>       Bus:
>>>       >       probed
>>>       >       >       ehci_hcd:
>>>       >       >       >       USB 2.0
>>>       >       >       >       >       >       'Enhanced' Host Controller 
>>> (EHCI)
>>>       Driver
>>>       >       ehci_hcd
>>>       >       >       >       0000:00:1a.7:
>>>       >       >       >       >       PCI INT
>>>       >       >       >       >       >       C ->  GSI 18 (level, low) ->  
>>> IRQ 18
>>>       ehci_hcd
>>>       >       >       0000:00:1a.7:
>>>       >       >       >       EHCI
>>>       >       >       >       >       Host
>>>       >       >       >       >       >       Controller ehci_hcd 
>>> 0000:00:1a.7: new
>>>       USB
>>>       >       bus
>>>       >       >       registered,
>>>       >       >       >       >       assigned bus
>>>       >       >       >       >       >       number 1 ehci_hcd 
>>> 0000:00:1a.7: debug
>>>       port 1
>>>       >       >       ehci_hcd
>>>       >       >       >       >       0000:00:1a.7: irq
>>>       >       >       >       >       >       18, io mem 0xb1a02000 ehci_hcd
>>>       0000:00:1a.7:
>>>       >       USB
>>>       >       >       2.0
>>>       >       >       >       started,
>>>       >       >       >       >       EHCI 1.00
>>>       >       >       >       >       >       usb usb1: New USB device 
>>> found,
>>>       >       idVendor=1d6b,
>>>       >       >       >       idProduct=0002 usb
>>>       >       >       >       >       usb1:
>>>       >       >       >       >       >       New USB device strings: Mfr=3,
>>>       Product=2,
>>>       >       >       SerialNumber=1
>>>       >       >       >       usb
>>>       >       >       >       >       usb1:
>>>       >       >       >       >       >       Product: EHCI Host Controller 
>>> usb
>>>       usb1:
>>>       >       >       Manufacturer:
>>>       >       >       >       Linux
>>>       >       >       >       >       2.6.32.9
>>>       >       >       >       >       >       ehci_hcd usb usb1: 
>>> SerialNumber:
>>>       >       0000:00:1a.7 usb
>>>       >       >       usb1:
>>>       >       >       >       >       configuration #1
>>>       >       >       >       >       >       chosen from 1 choice hub 
>>> 1-0:1.0: USB
>>>       hub
>>>       >       found hub
>>>       >       >       >       1-0:1.0: 6
>>>       >       >       >       >       ports
>>>       >       >       >       >       >       detected ehci_hcd 
>>> 0000:00:1d.7: PCI
>>>       INT A ->
>>>       >       GSI 23
>>>       >       >       >       (level, low)
>>>       >       >       >       >       ->  IRQ
>>>       >       >       >       >       >       23 ehci_hcd 0000:00:1d.7: 
>>> EHCI Host
>>>       >       Controller
>>>       >       >       ehci_hcd
>>>       >       >       >       >       0000:00:1d.7:
>>>       >       >       >       >       >       new USB bus registered, 
>>> assigned bus
>>>       number
>>>       >       2
>>>       >       >       ehci_hcd
>>>       >       >       >       >       0000:00:1d.7:
>>>       >       >       >       >       >       debug port 1 ehci_hcd 
>>> 0000:00:1d.7:
>>>       irq 23,
>>>       >       io mem
>>>       >       >       >       0xb1a01000
>>>       >       >       >       >       ehci_hcd
>>>       >       >       >       >       >       0000:00:1d.7: USB 2.0 
>>> started, EHCI
>>>       1.00 usb
>>>       >       usb2:
>>>       >       >       New USB
>>>       >       >       >       device
>>>       >       >       >       >       found,
>>>       >       >       >       >       >       idVendor=1d6b, idProduct=0002 
>>> usb
>>>       usb2: New
>>>       >       USB
>>>       >       >       device
>>>       >       >       >       strings:
>>>       >       >       >       >       Mfr=3,
>>>       >       >       >       >       >       Product=2, SerialNumber=1 usb 
>>> usb2:
>>>       Product:
>>>       >       EHCI
>>>       >       >       Host
>>>       >       >       >       Controller
>>>       >       >       >       >       usb
>>>       >       >       >       >       >       usb2: Manufacturer: Linux 
>>> 2.6.32.9
>>>       ehci_hcd
>>>       >       usb
>>>       >       >       usb2:
>>>       >       >       >       >       SerialNumber:
>>>       >       >       >       >       >       0000:00:1d.7 usb usb2: 
>>> configuration
>>>       #1
>>>       >       chosen from
>>>       >       >       1
>>>       >       >       >       choice hub
>>>       >       >       >       >       >       2-0:1.0: USB hub found hub 
>>> 2-0:1.0: 6
>>>       ports
>>>       >       >       detected
>>>       >       >       >       ohci_hcd:
>>>       >       >       >       >       USB 1.1
>>>       >       >       >       >       >       'Open' Host Controller (OHCI) 
>>> Driver
>>>       >       uhci_hcd: USB
>>>       >       >       >       Universal Host
>>>       >       >       >       >       >       Controller Interface driver
>>>       >       xen_allocate_pirq:
>>>       >       >       returning
>>>       >       >       >       irq 16
>>>       >       >       >       >       for gsi
>>>       >       >       >       >       >       16 Already setup the GSI :16 
>>> uhci_hcd
>>>       >       0000:00:1a.0:
>>>       >       >       PCI
>>>       >       >       >       INT A ->
>>>       >       >       >       >       GSI 16
>>>       >       >       >       >       >       (level, low) ->  IRQ 16 
>>> uhci_hcd
>>>       >       0000:00:1a.0: UHCI
>>>       >       >       Host
>>>       >       >       >       >       Controller
>>>       >       >       >       >       >       uhci_hcd 0000:00:1a.0: new 
>>> USB bus
>>>       >       registered,
>>>       >       >       assigned
>>>       >       >       >       bus
>>>       >       >       >       >       number 3
>>>       >       >       >       >       >       uhci_hcd 0000:00:1a.0: irq 
>>> 16, io
>>>       base
>>>       >       0x000020e0
>>>       >       >       usb
>>>       >       >       >       usb3: New
>>>       >       >       >       >       USB
>>>       >       >       >       >       >       device found, idVendor=1d6b,
>>>       idProduct=0001
>>>       >       usb
>>>       >       >       usb3: New
>>>       >       >       >       USB
>>>       >       >       >       >       device
>>>       >       >       >       >       >       strings: Mfr=3, Product=2,
>>>       SerialNumber=1
>>>       >       usb usb3:
>>>       >       >       >       Product: UHCI
>>>       >       >       >       >       Host
>>>       >       >       >       >       >       Controller usb usb3: 
>>> Manufacturer:
>>>       Linux
>>>       >       2.6.32.9
>>>       >       >       uhci_hcd
>>>       >       >       >       usb
>>>       >       >       >       >       usb3:
>>>       >       >       >       >       >       SerialNumber: 0000:00:1a.0 
>>> usb usb3:
>>>       >       configuration
>>>       >       >       #1
>>>       >       >       >       chosen from
>>>       >       >       >       >       1
>>>       >       >       >       >       >       choice hub 3-0:1.0: USB hub 
>>> found hub
>>>       >       3-0:1.0: 2
>>>       >       >       ports
>>>       >       >       >       detected
>>>       >       >       >       >       uhci_hcd
>>>       >       >       >       >       >       0000:00:1a.1: PCI INT B ->  
>>> GSI 21
>>>       (level,
>>>       >       low) ->
>>>       >       >       IRQ 21
>>>       >       >       >       uhci_hcd
>>>       >       >       >       >       >       0000:00:1a.1: UHCI Host 
>>> Controller
>>>       uhci_hcd
>>>       >       >       0000:00:1a.1:
>>>       >       >       >       new USB
>>>       >       >       >       >       bus
>>>       >       >       >       >       >       registered, assigned bus 
>>> number 4
>>>       uhci_hcd
>>>       >       >       0000:00:1a.1:
>>>       >       >       >       irq 21,
>>>       >       >       >       >       io base
>>>       >       >       >       >       >       0x000020c0 usb usb4: New USB 
>>> device
>>>       found,
>>>       >       >       idVendor=1d6b,
>>>       >       >       >       >       idProduct=0001
>>>       >       >       >       >       >       usb usb4: New USB device 
>>> strings:
>>>       Mfr=3,
>>>       >       Product=2,
>>>       >       >       >       >       SerialNumber=1 usb
>>>       >       >       >       >       >       usb4: Product: UHCI Host 
>>> Controller
>>>       usb
>>>       >       usb4:
>>>       >       >       >       Manufacturer: Linux
>>>       >       >       >       >       >       2.6.32.9 uhci_hcd usb usb4:
>>>       SerialNumber:
>>>       >       >       0000:00:1a.1 usb
>>>       >       >       >       usb4:
>>>       >       >       >       >       >       configuration #1 chosen from 
>>> 1 choice
>>>       hub
>>>       >       4-0:1.0:
>>>       >       >       USB hub
>>>       >       >       >       found
>>>       >       >       >       >       hub
>>>       >       >       >       >       >       4-0:1.0: 2 ports detected
>>>       xen_allocate_pirq:
>>>       >       >       returning irq
>>>       >       >       >       19 for
>>>       >       >       >       >       gsi 19
>>>       >       >       >       >       >       Already setup the GSI :19 
>>> uhci_hcd
>>>       >       0000:00:1a.2:
>>>       >       >       PCI INT D
>>>       >       >       >       ->  GSI
>>>       >       >       >       >       19
>>>       >       >       >       >       >       (level, low) ->  IRQ 19 
>>> uhci_hcd
>>>       >       0000:00:1a.2: UHCI
>>>       >       >       Host
>>>       >       >       >       >       Controller
>>>       >       >       >       >       >       uhci_hcd 0000:00:1a.2: new 
>>> USB bus
>>>       >       registered,
>>>       >       >       assigned
>>>       >       >       >       bus
>>>       >       >       >       >       number 5
>>>       >       >       >       >       >       uhci_hcd 0000:00:1a.2: irq 
>>> 19, io
>>>       base
>>>       >       0x000020a0
>>>       >       >       usb
>>>       >       >       >       usb5: New
>>>       >       >       >       >       USB
>>>       >       >       >       >       >       device found, idVendor=1d6b,
>>>       idProduct=0001
>>>       >       usb
>>>       >       >       usb5: New
>>>       >       >       >       USB
>>>       >       >       >       >       device
>>>       >       >       >       >       >       strings: Mfr=3, Product=2,
>>>       SerialNumber=1
>>>       >       usb usb5:
>>>       >       >       >       Product: UHCI
>>>       >       >       >       >       Host
>>>       >       >       >       >       >       Controller usb usb5: 
>>> Manufacturer:
>>>       Linux
>>>       >       2.6.32.9
>>>       >       >       uhci_hcd
>>>       >       >       >       usb
>>>       >       >       >       >       usb5:
>>>       >       >       >       >       >       SerialNumber: 0000:00:1a.2 
>>> usb usb5:
>>>       >       configuration
>>>       >       >       #1
>>>       >       >       >       chosen from
>>>       >       >       >       >       1
>>>       >       >       >       >       >       choice hub 5-0:1.0: USB hub 
>>> found hub
>>>       >       5-0:1.0: 2
>>>       >       >       ports
>>>       >       >       >       detected
>>>       >       >       >       >       >       xen_allocate_pirq: returning 
>>> irq 23
>>>       for gsi
>>>       >       23
>>>       >       >       Already
>>>       >       >       >       setup the
>>>       >       >       >       >       GSI :23
>>>       >       >       >       >       >       uhci_hcd 0000:00:1d.0: PCI 
>>> INT A ->
>>>       GSI 23
>>>       >       (level,
>>>       >       >       low) ->
>>>       >       >       >       IRQ 23
>>>       >       >       >       >       >       uhci_hcd 0000:00:1d.0: UHCI 
>>> Host
>>>       Controller
>>>       >       >       uhci_hcd
>>>       >       >       >       >       0000:00:1d.0: new
>>>       >       >       >       >       >       USB bus registered, assigned 
>>> bus
>>>       number 6
>>>       >       uhci_hcd
>>>       >       >       >       0000:00:1d.0:
>>>       >       >       >       >       irq 23,
>>>       >       >       >       >       >       io base 0x00002080 usb usb6: 
>>> New USB
>>>       device
>>>       >       found,
>>>       >       >       >       idVendor=1d6b,
>>>       >       >       >       >       >       idProduct=0001 usb usb6: New 
>>> USB
>>>       device
>>>       >       strings:
>>>       >       >       Mfr=3,
>>>       >       >       >       >       Product=2,
>>>       >       >       >       >       >       SerialNumber=1 usb usb6: 
>>> Product:
>>>       UHCI Host
>>>       >       >       Controller usb
>>>       >       >       >       usb6:
>>>       >       >       >       >       >       Manufacturer: Linux 2.6.32.9 
>>> uhci_hcd
>>>       usb
>>>       >       usb6:
>>>       >       >       >       SerialNumber:
>>>       >       >       >       >       >       0000:00:1d.0 usb usb6: 
>>> configuration
>>>       #1
>>>       >       chosen from
>>>       >       >       1
>>>       >       >       >       choice hub
>>>       >       >       >       >       >       6-0:1.0: USB hub found hub 
>>> 6-0:1.0: 2
>>>       ports
>>>       >       >       detected
>>>       >       >       >       >       xen_allocate_pirq:
>>>       >       >       >       >       >       returning irq 19 for gsi 19 
>>> Already
>>>       setup
>>>       >       the GSI
>>>       >       >       :19
>>>       >       >       >       uhci_hcd
>>>       >       >       >       >       >       0000:00:1d.1: PCI INT B ->  
>>> GSI 19
>>>       (level,
>>>       >       low) ->
>>>       >       >       IRQ 19
>>>       >       >       >       uhci_hcd
>>>       >       >       >       >       >       0000:00:1d.1: UHCI Host 
>>> Controller
>>>       uhci_hcd
>>>       >       >       0000:00:1d.1:
>>>       >       >       >       new USB
>>>       >       >       >       >       bus
>>>       >       >       >       >       >       registered, assigned bus 
>>> number 7
>>>       uhci_hcd
>>>       >       >       0000:00:1d.1:
>>>       >       >       >       irq 19,
>>>       >       >       >       >       io base
>>>       >       >       >       >       >       0x00002060 usb usb7: New USB 
>>> device
>>>       found,
>>>       >       >       idVendor=1d6b,
>>>       >       >       >       >       idProduct=0001
>>>       >       >       >       >       >       usb usb7: New USB device 
>>> strings:
>>>       Mfr=3,
>>>       >       Product=2,
>>>       >       >       >       >       SerialNumber=1 usb
>>>       >       >       >       >       >       usb7: Product: UHCI Host 
>>> Controller
>>>       usb
>>>       >       usb7:
>>>       >       >       >       Manufacturer: Linux
>>>       >       >       >       >       >       2.6.32.9 uhci_hcd usb usb7:
>>>       SerialNumber:
>>>       >       >       0000:00:1d.1 usb
>>>       >       >       >       usb7:
>>>       >       >       >       >       >       configuration #1 chosen from 
>>> 1 choice
>>>       hub
>>>       >       7-0:1.0:
>>>       >       >       USB hub
>>>       >       >       >       found
>>>       >       >       >       >       hub
>>>       >       >       >       >       >       7-0:1.0: 2 ports detected
>>>       xen_allocate_pirq:
>>>       >       >       returning irq
>>>       >       >       >       18 for
>>>       >       >       >       >       gsi 18
>>>       >       >       >       >       >       Already setup the GSI :18 
>>> uhci_hcd
>>>       >       0000:00:1d.2:
>>>       >       >       PCI INT C
>>>       >       >       >       ->  GSI
>>>       >       >       >       >       18
>>>       >       >       >       >       >       (level, low) ->  IRQ 18 
>>> uhci_hcd
>>>       >       0000:00:1d.2: UHCI
>>>       >       >       Host
>>>       >       >       >       >       Controller
>>>       >       >       >       >       >       uhci_hcd 0000:00:1d.2: new 
>>> USB bus
>>>       >       registered,
>>>       >       >       assigned
>>>       >       >       >       bus
>>>       >       >       >       >       number 8
>>>       >       >       >       >       >       uhci_hcd 0000:00:1d.2: irq 
>>> 18, io
>>>       base
>>>       >       0x00002040
>>>       >       >       usb
>>>       >       >       >       usb8: New
>>>       >       >       >       >       USB
>>>       >       >       >       >       >       device found, idVendor=1d6b,
>>>       idProduct=0001
>>>       >       usb
>>>       >       >       usb8: New
>>>       >       >       >       USB
>>>       >       >       >       >       device
>>>       >       >       >       >       >       strings: Mfr=3, Product=2,
>>>       SerialNumber=1
>>>       >       usb usb8:
>>>       >       >       >       Product: UHCI
>>>       >       >       >       >       Host
>>>       >       >       >
>>>       >       >
>>>       >       >  References
>>>       >       >
>>>       >       >     Visible links
>>>       >       >     1. mailto:[20][21]pasik@xxxxxx
>>>       >       >     2. mailto:[21][22]pasik@xxxxxx
>>>       >       >     3. mailto:[22][23]pasik@xxxxxx
>>>       >       >     4. mailto:[23][24]pasik@xxxxxx
>>>       >       >     5. mailto:[24][25]pasik@xxxxxx
>>>       >       >     6.
>>>       >
>>>        [25][26]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >       >     7.
>>>       >
>>>        
>>> [26][27]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >       >     8. mailto:[27][28]pasik@xxxxxx
>>>       >       >     9.
>>>       >
>>>        [28][29]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >       >    10.
>>>       >
>>>        
>>> [29][30]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >       >    11. mailto:[30][31]pasik@xxxxxx
>>>       >       >    12. mailto:[31][32]pasik@xxxxxx
>>>       >       >    13.
>>>       >
>>>        [32][33]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >       >    14.
>>>       >
>>>        
>>> [33][34]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >       >    15. mailto:[34][35]pasik@xxxxxx
>>>       >       >    16.
>>>       >
>>>        [35][36]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >       >    17.
>>>       >
>>>        
>>> [36][37]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >       >    18. mailto:[37][38]pasik@xxxxxx
>>>       >
>>>       >  References
>>>       >
>>>       >     Visible links
>>>       >     1. mailto:[39]pasik@xxxxxx
>>>       >     2. mailto:[40]pasik@xxxxxx
>>>       >     3. mailto:[41]pasik@xxxxxx
>>>       >     4. mailto:[42]pasik@xxxxxx
>>>       >     5. mailto:[43]pasik@xxxxxx
>>>       >     6. mailto:[44]pasik@xxxxxx
>>>       >     7.
>>>       [45]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >     8.
>>>       
>>> [46]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >     9. mailto:[47]pasik@xxxxxx
>>>       >    10.
>>>       [48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >    11.
>>>       
>>> [49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >    12. mailto:[50]pasik@xxxxxx
>>>       >    13. mailto:[51]pasik@xxxxxx
>>>       >    14.
>>>       [52]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >    15.
>>>       
>>> [53]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >    16. mailto:[54]pasik@xxxxxx
>>>       >    17.
>>>       [55]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >    18.
>>>       
>>> [56]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >    19. mailto:[57]pasik@xxxxxx
>>>       >    20. mailto:[58]pasik@xxxxxx
>>>       >    21. mailto:[59]pasik@xxxxxx
>>>       >    22. mailto:[60]pasik@xxxxxx
>>>       >    23. mailto:[61]pasik@xxxxxx
>>>       >    24. mailto:[62]pasik@xxxxxx
>>>       >    25.
>>>       [63]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >    26.
>>>       
>>> [64]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >    27. mailto:[65]pasik@xxxxxx
>>>       >    28.
>>>       [66]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >    29.
>>>       
>>> [67]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >    30. mailto:[68]pasik@xxxxxx
>>>       >    31. mailto:[69]pasik@xxxxxx
>>>       >    32.
>>>       [70]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >    33.
>>>       
>>> [71]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >    34. mailto:[72]pasik@xxxxxx
>>>       >    35.
>>>       [73]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>       >    36.
>>>       
>>> [74]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>       >    37. mailto:[75]pasik@xxxxxx
>>>
>>> References
>>>
>>>     Visible links
>>>     1. mailto:pasik@xxxxxx
>>>     2. mailto:pasik@xxxxxx
>>>     3. mailto:pasik@xxxxxx
>>>     4. mailto:pasik@xxxxxx
>>>     5. mailto:pasik@xxxxxx
>>>     6. mailto:pasik@xxxxxx
>>>     7. mailto:pasik@xxxxxx
>>>     8. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>     9. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    10. mailto:pasik@xxxxxx
>>>    11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    12. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    13. mailto:pasik@xxxxxx
>>>    14. mailto:pasik@xxxxxx
>>>    15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    16. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    17. mailto:pasik@xxxxxx
>>>    18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    19. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    20. mailto:pasik@xxxxxx
>>>    21. mailto:pasik@xxxxxx
>>>    22. mailto:pasik@xxxxxx
>>>    23. mailto:pasik@xxxxxx
>>>    24. mailto:pasik@xxxxxx
>>>    25. mailto:pasik@xxxxxx
>>>    26. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    27. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    28. mailto:pasik@xxxxxx
>>>    29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    30. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    31. mailto:pasik@xxxxxx
>>>    32. mailto:pasik@xxxxxx
>>>    33. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    34. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    35. mailto:pasik@xxxxxx
>>>    36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    37. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    38. mailto:pasik@xxxxxx
>>>    39. mailto:pasik@xxxxxx
>>>    40. mailto:pasik@xxxxxx
>>>    41. mailto:pasik@xxxxxx
>>>    42. mailto:pasik@xxxxxx
>>>    43. mailto:pasik@xxxxxx
>>>    44. mailto:pasik@xxxxxx
>>>    45. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    46. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    47. mailto:pasik@xxxxxx
>>>    48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    49. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    50. mailto:pasik@xxxxxx
>>>    51. mailto:pasik@xxxxxx
>>>    52. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    53. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    54. mailto:pasik@xxxxxx
>>>    55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    56. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    57. mailto:pasik@xxxxxx
>>>    58. mailto:pasik@xxxxxx
>>>    59. mailto:pasik@xxxxxx
>>>    60. mailto:pasik@xxxxxx
>>>    61. mailto:pasik@xxxxxx
>>>    62. mailto:pasik@xxxxxx
>>>    63. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    64. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    65. mailto:pasik@xxxxxx
>>>    66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    67. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    68. mailto:pasik@xxxxxx
>>>    69. mailto:pasik@xxxxxx
>>>    70. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    71. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    72. mailto:pasik@xxxxxx
>>>    73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>>>    74. 
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>>>    75. mailto:pasik@xxxxxx
>>>      
>>
>>    
>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.