|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: crash in print_all_ICs()
On Thu, Mar 18, 2010 at 04:56:35PM -0700, kishore kumar wrote: > Attached is the capture log after changing the grub.conf to > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 earlyprintk=xen nomodeset > initcall_debug debug swiotlb=force apic=debug loglevel=10 > > for the dom 0 kernel command line. > Hmm, interesting. Now it seems to crash in a different place. Jeremy: Have you seen this one earlier? .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 0 0 0 0 0 0 0 00 IRQ to pin mappings: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.32.10 #2 RIP: e030:[<ffffffff819bf0e0>] [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 RSP: e02b:ffff880064edbe20 EFLAGS: 00010286 RAX: ffffffff816ed2c0 RBX: 0000000000000000 RCX: 000000000f640f01 RDX: ffff880066808000 RSI: ffff880064edbd40 RDI: 0000000000000000 RBP: ffff880064edbea0 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: ffff880064edbce0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880005ec8000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff880064eda000, task ffff880064ee0000) Stack: ffff880000000000 ffffffff00000000 ffff880000000000 ffffffff811ebee8 <0> ffff880064edbe60 0000000181083e7c 000000ff00000002 0000000000000002 <0> ffff880000000000 ffffffff810846f0 ffffffff817ce660 00000000291fd332 Call Trace: [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e [<ffffffff810846f0>] ? ktime_get+0x78/0x93 [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b [<ffffffff819ae961>] kernel_init+0x172/0x1cc [<ffffffff81013eaa>] child_rip+0xa/0x20 [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc [<ffffffff81013810>] ? restore_args+0x0/0x30 [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 [<ffffffff81013ea0>] ? child_rip+0x0/0x20 Code: 45 b0 0f 8c 5b fd ff ff 48 c7 c7 34 40 60 81 31 c0 45 31 e4 e8 11 d5 69 ff 31 ff e8 67 b5 6f ff eb 5a 48 85 c0 74 4a 48 8b 58 40 <48> 83 3b 00 74 40 44 89 e6 48 c7 c7 4d 40 60 81 31 c0 e8 e8 d4 RIP [<ffffffff819bf0e0>] print_all_ICs+0x487/0x500 RSP <ffff880064edbe20> CR2: 0000000000000000 ---[ end trace 0007ad9d59420718 ]--- swapper used greatest stack depth: 4168 bytes left Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: swapper Tainted: G D 2.6.32.10 #2 Call Trace: [<ffffffff8105b747>] panic+0xa5/0x167 [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf [<ffffffff8105f2b3>] ? do_exit+0x38a/0x701 [<ffffffff8100f43f>] ? xen_restore_fl_direct_end+0x0/0x1 [<ffffffff8108f823>] ? lock_release+0x179/0x184 [<ffffffff8108ca25>] ? trace_hardirqs_on+0xd/0xf [<ffffffff81475d4f>] ? _write_unlock_irq+0x37/0x3c [<ffffffff8105efa7>] do_exit+0x7e/0x701 [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef [<ffffffff8147764c>] oops_end+0xbf/0xc7 [<ffffffff81038a02>] no_context+0x1f1/0x200 [<ffffffff819b02ef>] ? md_run_setup+0x104/0x4ef [<ffffffff81038c61>] __bad_area_nosemaphore+0x191/0x1b4 [<ffffffff8100f452>] ? check_events+0x12/0x20 [<ffffffff81038d0e>] bad_area_nosemaphore+0x13/0x15 [<ffffffff81478b20>] do_page_fault+0x16d/0x2a2 [<ffffffff814769d5>] page_fault+0x25/0x30 [<ffffffff819bf0e0>] ? print_all_ICs+0x487/0x500 [<ffffffff811ebee8>] ? debugfs_create_file+0x239/0x28e [<ffffffff810846f0>] ? ktime_get+0x78/0x93 [<ffffffff819bec59>] ? print_all_ICs+0x0/0x500 [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b [<ffffffff819ae961>] kernel_init+0x172/0x1cc [<ffffffff81013eaa>] child_rip+0xa/0x20 [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc [<ffffffff81013810>] ? restore_args+0x0/0x30 [<ffffffff8108ae5b>] ? trace_hardirqs_off_caller+0x2f/0x89 [<ffffffff81013ea0>] ? child_rip+0x0/0x20 -- Pasi > > > On Thu, Mar 18, 2010 at 2:27 PM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote: > > On Thu, Mar 18, 2010 at 01:23:41PM -0700, kishore kumar wrote: > > pvdisplay does not work in my RHEL machine. > > > > I did pvscan. > > below is the output. > > > > PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free] > > > > Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ] > > > > Ok so /dev/sda2 is the correct device holding the VolGroup01. > > Looking at your latest capture.doc I see this: > > Command line: ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen > nomodeset initcall_debug debug swiotlb=force apic=debug loglevel=10 > > So your root= parameter is wrong! Edit grub.conf and replace it with the > actual root device: > root=/dev/VolGroup01/LogVol00 > > -- Pasi > > > On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen > <[1][2]pasik@xxxxxx> wrote: > > > > On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote: > > > I did the below steps for pvops dom 0 kernel. > > > > > > make menuconfig > > > make bzImage > > > make modules > > > make modules_install > > > cp -a .config /boot/config-2.6.32.10 > > > cp -a System.map /boot/System.map-2.6.32.10 > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10 > > > /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img > > 2.6.32.10 > > > I tried root=/dev/VolGroup01/LogVol00 . > > > > > > > Ok. > > > > Please run "pvdisplay" to see which actual partition is the LVM > PV for > > your > > volume group. > > > > Also if you're running Fedora 12 you could try generating an > initrd > > image > > with dracut instead of mkinitrd. > > > > -- Pasi > > > > > > > > On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen > > <[1][2][3]pasik@xxxxxx> wrote: > > > > > > On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar > wrote: > > > > Here is the output of df -h and cat /etc/fstab of my > > machine. > > > > > > > > > > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and > > > root=/dev/VolGroup01/LogVol00 arguments for the dom0 > kernel? > > > > > > How did you generate the initrd image for the dom0 kernel? > > > > > > Anyway this sounds like a grub.conf or initrd problem, not > Xen or > > pvops > > > dom0 kernel kernel problem. > > > > > > -- Pasi > > > > > > > Please let me know your thoughts. > > > > > > > > [root@localhost kishore]# df -h > > > > > > > > Filesystem Size Used Avail Use% Mounted on > > > > > > > > /dev/mapper/VolGroup01-LogVol00 > > > > > > > > 223G 29G 182G 14% > / > > > > > > > > /dev/sda1 99M 81M 13M 87% /boot > > > > > > > > tmpfs 757M 0 757M 0% /dev/shm > > > > > > > > [root@localhost kishore]# cat /etc/fstab > > > > > > > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 > > > > > > > > LABEL=/boot /boot ext3 defaults 1 2 > > > > > > > > tmpfs /dev/shm tmpfs defaults 0 0 > > > > > > > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > > > > > > > sysfs /sys sysfs defaults 0 0 > > > > > > > > proc /proc proc defaults 0 0 > > > > > > > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 > > > > > > > > [root@localhost kishore]# > > > > > > > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen > > > <[1][2][3][4]pasik@xxxxxx> wrote: > > > > > > > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore > kumar > > wrote: > > > > > I am not sure. Can you please let me know how > to > > check > > > this? any > > > > command > > > > > ?? > > > > > > > > well simple "df -h" will show it. and also "cat > > /etc/fstab". > > > > You can also check it from your grub > configuration.. from > > the > > > working > > > > baremetal (non-Xen) entry. > > > > > > > > -- Pasi > > > > > > > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi > Kärkkäinen > > > > <[1][2][3][4][5]pasik@xxxxxx> wrote: > > > > > > > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, > kishore > > kumar > > > wrote: > > > > > > attached is the log captured in with > the word > > > document . > > > > > > > > > > > > > > > > Scanning logical volumes > > > > > Reading all physical volumes. This may > take a > > while... > > > > > Activating logical volumes > > > > > Volume group "VolGroup01" not found > > > > > Trying to resume from > /dev/VolGroup01/LogVol01 > > > > > Unable to access resume device > > (/dev/VolGroup01/LogVol01) > > > > > Creating root device. > > > > > Mounting root filesystem. > > > > > mount: could not find filesystem '/dev/root' > > > > > Setting up other filesystems. > > > > > Setting up new root fs > > > > > setuproot: moving /dev failed: No such file > or > > directory > > > > > no fstab.sys, mounting internal defaults > > > > > setuproot: error mounting /proc: No such > file or > > directory > > > > > setuproot: error mounting /sys: No such file > or > > directory > > > > > Switching to new root and running init. > > > > > unmounting old /dev > > > > > unmounting old /proc > > > > > unmounting old /sys > > > > > switchroot: mount failed: No such file or > directory > > > > > init used greatest stack depth: 4088 bytes > left > > > > > Kernel panic - not syncing: Attempted to > kill init! > > > > > > > > > > So it seems it gets all the way to executing > the > > initrd > > > image, > > > > > which then fails to mount the root fs. > > > > > > > > > > Earlier in the log: > > > > > ata1: SATA link up 3.0 Gbps (SStatus 123 > SControl > > 300) > > > > > ata1.00: ATA-8: Hitachi HDT721025SLA380, > STBOA3AA, > > max > > > UDMA/133 > > > > > ata1.00: 488397168 sectors, multi 0: LBA48 > NCQ > > (depth > > > 31/32), AA > > > > > ata1.00: configured for UDMA/133 > > > > > scsi 0:0:0:0: Direct-Access ATA > Hitachi > > HDT72102 > > > STBO > > > > PQ: 0 > > > > > ANSI: 5 > > > > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > > > > sd 0:0:0:0: [sda] 488397168 512-byte logical > > blocks: (250 > > > GB/232 > > > > GiB) > > > > > sd 0:0:0:0: [sda] Write Protect is off > > > > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > > > > sd 0:0:0:0: [sda] Write cache: enabled, read > cache: > > > enabled, > > > > doesn't > > > > > support DPO or FUA > > > > > sda: sda1 sda2 > > > > > sd 0:0:0:0: [sda] Attached SCSI disk > > > > > > > > > > so /dev/sda was detected. Is your root lvm > volume > > on > > > /dev/sda ? > > > > > Is /dev/VolGroup01/LogVol01 really your root > fs? > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi > > Kärkkäinen > > > > > <[1][2][3][4][5][6]pasik@xxxxxx> wrote: > > > > > > > > > > > > On Tue, Mar 16, 2010 at 02:56:06PM > -0700, > > kishore > > > kumar > > > > wrote: > > > > > > > Please find the attached log > file after > > fixing > > > the > > > > dom 0 > > > > > kernel cmd > > > > > > line > > > > > > > as below > > > > > > > > > > > > > > ro root=/dev/VolGroup01/LogVol00 > > console=hvc0 > > > > > earlyprintk=xen > > > > > > nomodeset > > > > > > > > > > > > > > > > > > > There's something wrong with the log, > the > > dom0 > > > kernel > > > > parts are > > > > > all on > > > > > > one line.. > > > > > > It's really difficult to read it. > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, > Pasi > > > Kärkkäinen > > > > > > <[1][2][3][4][5][6][7]pasik@xxxxxx> > wrote: > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at > 02:16:22PM > > -0700, > > > kishore > > > > kumar > > > > > wrote: > > > > > > > > I did below steps. > > > > > > > > > > > > > > > > > > > > > > > > I pulled DOM 0 kernel > from > > > > > > > > git clone > > > > > > > > > > > > > > > > > > > > > > > > > > > > > git://[1][2][3][4][5][6][7][8]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > > linux-2.6-xen > > > > > > > > > > > > > > > > cd linux-2.6-xen > > > > > > > > > > > > > > > > make clean > > > > > > > > > > > > > > > > cp -a .config .config-old > > > > > > > > > > > > > > > > wget -O .config > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [2][3][4][5][6][7][8][9]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > > > > > > > make oldconfig > > > > > > > > > > > > > > > > make bzImage > > > > > > > > > > > > > > > > make modules > > > > > > > > > > > > > > > > make modules_install > > > > > > > > > > > > > > > > cp -a .config > > /boot/config-2.6.32.9 > > > > > > > > > > > > > > > > cp -a System.map > > > /boot/System.map-2.6.32.9 > > > > > > > > > > > > > > > > cp -a > arch/x86/boot/bzImage > > > > /boot/vmlinuz-2.6.32.9 > > > > > > > > > > > > > > > > and modified the > grub.conf as > > below > > > > > > > > > > > > > > > > > > > > > > > > Root(hd0,0) > > > > > > > > > > > > > > > > kernel /xen.gz > console=vga,com1 > > > > com1=115200,8n1 > > > > > msi=1 > > > > > > iommu=1 > > > > > > > > > > > > > > > > module /vmlinuz-2.6.32.9 > ro > > > > > root=/dev/VolGroup01/LogVo100 > > > > > > rhgb > > > > > > > quiet > > > > > > > > > > > > > > > > module > /initrd-2.6.32.9.img > > > > > > > > > > > > > > > > > > > > > > > > and rebooted the machine. > Then > > It > > > booted with > > > > some > > > > > xen > > > > > > messages > > > > > > > and > > > > > > > > stopped. Those were the > > messages > > > captured > > > > from > > > > > serial > > > > > > console. > > > > > > > > > > > > > > > > Please let me know if I > did > > something > > > wrong > > > > here. > > > > > > > > > > > > > > > > > > > > > > Please fix the kernel cmdline > based > > on my > > > earlier > > > > email, > > > > > and > > > > > > capture and > > > > > > > post the > > > > > > > serial console log again! > > > > > > > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at > 1:20 PM, > > Pasi > > > > Kärkkäinen > > > > > > > > <[3][4][5][6][7][8][9][10]pasik@xxxxxx> > > wrote: > > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at > > 01:16:28PM > > > -0700, > > > > Jeremy > > > > > > Fitzhardinge > > > > > > > wrote: > > > > > > > > > On 03/16/2010 12:48 > PM, Pasi > > > Kärkkäinen > > > > wrote: > > > > > > > > >> On Tue, Mar 16, 2010 > at > > 09:43:44PM > > > +0200, > > > > Pasi > > > > > > Kärkkäinen > > > > > > > wrote: > > > > > > > > >> > > > > > > > > >>> On Tue, Mar 16, > 2010 at > > > 10:32:17AM > > > > -0700, > > > > > kishore > > > > > > kumar > > > > > > > wrote: > > > > > > > > >>> > > > > > > > > >>>> Attached is > the > > output > > > captured > > > > from > > > > > serial > > > > > > console. > > > > > > > > >>>> > > > > > > > > >>>> Machine does > not boot > > after > > > > compiling xen > > > > > 3.4.3 > > > > > > with > > > > > > > pv_ops dom > > > > > > > > 0 kernel. > > > > > > > > >>>> > > > > > > > > >>>> Please let me > know > > what is > > > going > > > > wrong > > > > > here. > > > > > > > > >>>> > > > > > > > > >>>> > > > > > > > > >>> Ok this looks like > a bug > > that is > > > already > > > > being > > > > > sorted > > > > > > out on > > > > > > > > xen-devel mailinglist. > > > > > > > > >>> I added CC to > xen-devel. > > > > > > > > >>> > > > > > > > > >>> > > > > > > > > >> > > > > > > > > > > > > > > > > > > Those messages are > not a > > problem in > > > > themselves, > > > > > but the > > > > > > related > > > > > > > > problem > > > > > > > > > is believed to be > fixed in > > current > > > > > xen/stable-2.6.32.x. > > > > > > It > > > > > > > looks like > > > > > > > > > the output stops > there > > because the > > > Xen > > > > console > > > > > isn't set > > > > > > up > > > > > > > properly > > > > > > > > for > > > > > > > > > some reason. > > > > > > > > > > > > > > > > > > > > > > > > > Yeah, remove "rhgb > quiet" from > > the > > > options.. > > > > the > > > > > dom0 > > > > > > kernel > > > > > > > cmdline > > > > > > > > should be like this: > > > > > > > > ro > > root=/dev/VolGroup01/LogVol00 > > > > console=hvc0 > > > > > > earlyprintk=xen > > > > > > > nomodeset > > > > > > > > -- Pasi > > > > > > > > > > > > > > > > References > > > > > > > > > > > > > > > > Visible links > > > > > > > > 1. > > > > > > > > > > > > > > > > > > > > > > [5][6][7][8][9][10][11]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > > 2. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [6][7][8][9][10][11][12]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > 3. > > mailto:[7][8][9][10][11][12][13]pasik@xxxxxx > > > > > > > > > > > > > > References > > > > > > > > > > > > > > Visible links > > > > > > > 1. > > mailto:[9][10][11][12][13][14]pasik@xxxxxx > > > > > > > 2. > > > > > > > > > > > > > > > > > > > > > > [10][11][12][13][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > 3. > > > > > > > > > > > > > > > > > > > > > > [11][12][13][14][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > 4. > > mailto:[12][13][14][15][16][17]pasik@xxxxxx > > > > > > > 5. > > > > > > > > > > > > > > > > > > > > > > [13][14][15][16][17][18]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > > > 6. > > > > > > > > > > > > > > > > > > > > > > [14][15][16][17][18][19]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > 7. > > mailto:[15][16][17][18][19][20]pasik@xxxxxx > > > > > > > Asserting Post complete GPIO!!! > > > > > > > Transfer control to CSM 16-bit > binary for > > legacy > > > boot > > > > > > > __ __ _____ _ _ > _____ > > > _ _ > > > > > > > \ \/ /___ _ __ |___ /| || | > |___ / > > _ __ > > > ___| || | > > > > _ > > > > > __ _ > > > > > > __ ___ > > > > > > > \ // _ \ '_ \ |_ \| || |_ > |_ \ __| > > '__/ > > > __| || > > > > |_ __| > > > > > '_ \| > > > > > > '__/ _ \ > > > > > > > / \ __/ | | | ___) |__ _| > ___) |__| > > | | > > > (__|__ > > > > _|__| > > > > > |_) | | > > > > > > | __/ > > > > > > > /_/\_\___|_| |_| |____(_) > |_|(_)____/ > > |_| > > > \___| |_| > > > > | > > > > > .__/|_| > > > > > > \___| > > > > > > > > > > > |_| > > > > > > > (XEN) Xen version 3.4.3-rc4-pre > > > (kishore@localdomain) > > > > (gcc > > > > > version > > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) > Mon Mar > > 15 > > > 13:44:31 PDT > > > > 2010 > > > > > > > (XEN) Latest ChangeSet: Tue Mar 09 > > 18:15:52 2010 > > > +0000 > > > > > > 19924:6e72f8c3c017 > > > > > > > (XEN) Command line: > console=vga,com1 > > > com1=115200,8n1 > > > > msi=1 > > > > > iommu=1 > > > > > > > (XEN) Video information: > > > > > > > (XEN) VGA is text mode 80x25, font > 8x16 > > > > > > > (XEN) VBE/DDC methods: none; EDID > > transfer time: > > > 0 > > > > seconds > > > > > > > (XEN) EDID info not retrieved > because no > > DDC > > > retrieval > > > > method > > > > > > detected > > > > > > > (XEN) Disc information: > > > > > > > (XEN) Found 1 MBR signatures > > > > > > > (XEN) Found 1 EDD information > structures > > > > > > > (XEN) Xen-e820 RAM map: > > > > > > > (XEN) 0000000000000000 - > 000000000009d000 > > > (usable) > > > > > > > (XEN) 000000000009d000 - > 00000000000a0000 > > > (reserved) > > > > > > > (XEN) 00000000000e0000 - > 0000000000100000 > > > (reserved) > > > > > > > (XEN) 0000000000100000 - > 000000006d597000 > > > (usable) > > > > > > > (XEN) 000000006d597000 - > 000000006d686000 > > > (reserved) > > > > > > > (XEN) 000000006d686000 - > 000000006f598000 > > > (usable) > > > > > > > (XEN) 000000006f598000 - > 000000006f59a000 > > > (reserved) > > > > > > > (XEN) 000000006f59a000 - > 000000006f5af000 > > (ACPI > > > NVS) > > > > > > > (XEN) 000000006f5af000 - > 000000006f5d9000 > > > (reserved) > > > > > > > (XEN) 000000006f5d9000 - > 000000006f5f9000 > > (ACPI > > > data) > > > > > > > (XEN) 000000006f5f9000 - > 000000006f6df000 > > (ACPI > > > NVS) > > > > > > > (XEN) 000000006f6df000 - > 000000006f700000 > > (ACPI > > > data) > > > > > > > (XEN) 000000006f700000 - > 0000000080000000 > > > (reserved) > > > > > > > (XEN) 00000000a0000000 - > 00000000b0000000 > > > (reserved) > > > > > > > (XEN) 00000000fc000000 - > 00000000fd000000 > > > (reserved) > > > > > > > (XEN) 00000000fed1c000 - > 00000000fed20000 > > > (reserved) > > > > > > > (XEN) 00000000ffc00000 - > 0000000100000000 > > > (reserved) > > > > > > > (XEN) System RAM: 1780MB > (1823000kB) > > > > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 > INTEL > > ) > > > > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 > INTEL > > THRLY > > > > 0 > > > > > > 1000013) > > > > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 > INTEL > > THRLY > > > > 0 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 > INTEL > > THRLY > > > > 3 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 > INTEL > > THRLY > > > > 0 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 > INTEL > > THRLY > > > > 1 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 > INTEL > > THRLY > > > > 1 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 > INTEL > > THRLY > > > > 1 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 > INTEL > > THRLY > > > > 0 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC > (r1 > > INTEL SSDT > > > PM > > > > 4000 > > > > > INTL > > > > > > 20061109) > > > > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 > INTEL > > THRLY > > > > 1 > > > > > MSFT > > > > > > 100000D) > > > > > > > (XEN) Domain heap initialised > > > > > > > (XEN) Processor #0 6:12 APIC > version 21 > > > > > > > (XEN) Processor #2 6:12 APIC > version 21 > > > > > > > (XEN) Processor #4 6:12 APIC > version 21 > > > > > > > (XEN) Processor #16 6:12 APIC > version 21 > > > > > > > (XEN) Processor #18 6:12 APIC > version 21 > > > > > > > (XEN) Processor #20 6:12 APIC > version 21 > > > > > > > (XEN) Processor #1 6:12 APIC > version 21 > > > > > > > (XEN) Processor #3 6:12 APIC > version 21 > > > > > > > (XEN) Processor #5 6:12 APIC > version 21 > > > > > > > (XEN) Processor #17 6:12 APIC > version 21 > > > > > > > (XEN) Processor #19 6:12 APIC > version 21 > > > > > > > (XEN) Processor #21 6:12 APIC > version 21 > > > > > > > (XEN) IOAPIC[0]: apic_id 8, version > 32, > > address > > > > 0xfec00000, GSI > > > > > 0-23 > > > > > > > (XEN) IOAPIC[1]: apic_id 9, version > 32, > > address > > > > 0xfec90000, GSI > > > > > 24-47 > > > > > > > (XEN) Enabling APIC mode: Phys. > Using 2 > > I/O > > > APICs > > > > > > > (XEN) Intel VT-d DMAR tables have > been > > parsed. > > > > > > > (XEN) Using scheduler: SMP Credit > > Scheduler > > > (credit) > > > > > > > (XEN) Detected 3200.207 MHz > processor. > > > > > > > (XEN) VMX: Supported advanced > features: > > > > > > > (XEN) - APIC MMIO access > virtualisation > > > > > > > (XEN) - APIC TPR shadow > > > > > > > (XEN) - Extended Page Tables (EPT) > > > > > > > (XEN) - Virtual-Processor > Identifiers > > (VPID) > > > > > > > (XEN) - Virtual NMI > > > > > > > (XEN) - MSR direct-access bitmap > > > > > > > (XEN) VMX: EPT is available. > > > > > > > (XEN) VMX: VPID is available. > > > > > > > (XEN) HVM: VMX enabled > > > > > > > (XEN) HVM: Hardware Assisted Paging > > detected. > > > > > > > (XEN) CPU0: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 1/2 eip > 88000 > > > > > > > (XEN) CPU1: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 2/4 eip > 88000 > > > > > > > (XEN) CPU2: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 3/16 eip > 88000 > > > > > > > (XEN) CPU3: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 4/18 eip > 88000 > > > > > > > (XEN) CPU4: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 5/20 eip > 88000 > > > > > > > (XEN) CPU5: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 6/1 eip > 88000 > > > > > > > (XEN) CPU6: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 7/3 eip > 88000 > > > > > > > (XEN) CPU7: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 8/5 eip > 88000 > > > > > > > (XEN) CPU8: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 9/17 eip > 88000 > > > > > > > (XEN) CPU9: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 10/19 eip > 88000 > > > > > > > (XEN) CPU10: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Booting processor 11/21 eip > 88000 > > > > > > > (XEN) CPU11: Intel Genuine Intel(R) > CPU > > > 000 > > > > @ > > > > > 3.20GHz > > > > > > stepping 00 > > > > > > > (XEN) Total of 12 processors > activated. > > > > > > > (XEN) ENABLING IO-APIC IRQs > > > > > > > (XEN) -> Using new ACK method > > > > > > > (XEN) checking TSC synchronization > across > > 12 > > > CPUs: > > > > passed. > > > > > > > (XEN) Platform timer is 14.318MHz > HPET > > > > > > > ?(XEN) Brought up 12 CPUs > > > > > > > (XEN) Intel VT-d Snoop Control > supported. > > > > > > > (XEN) Intel VT-d DMA Passthrough > not > > supported. > > > > > > > (XEN) Intel VT-d Queued > Invalidation > > supported. > > > > > > > (XEN) Intel VT-d Interrupt > Remapping > > supported. > > > > > > > (XEN) I/O virtualisation enabled > > > > > > > (XEN) I/O virtualisation for PV > guests > > disabled > > > > > > > (XEN) xenoprof: Initialization > failed. > > Intel > > > processor > > > > model 44 > > > > > for P6 > > > > > > class family is not supported > > > > > > > (XEN) *** LOADING DOMAIN 0 *** > > > > > > > (XEN) Xen kernel: 64-bit, lsb, > compat32 > > > > > > > (XEN) Dom0 kernel: 64-bit, PAE, > lsb, > > paddr > > > 0x1000000 -> > > > > > 0x26bb000 > > > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > > > > > (XEN) Dom0 alloc.: > > > 0000000064000000->0000000068000000 > > > > > (404490 pages > > > > > > to be allocated) > > > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > > > > > (XEN) Loaded kernel: > > > ffffffff81000000->ffffffff826bb000 > > > > > > > (XEN) Init. ramdisk: > > > ffffffff826bb000->ffffffff82d0d800 > > > > > > > (XEN) Phys-Mach map: > > > ffffffff82d0e000->ffffffff83044050 > > > > > > > (XEN) Start info: > > > ffffffff83045000->ffffffff830454b4 > > > > > > > (XEN) Page tables: > > > ffffffff83046000->ffffffff83063000 > > > > > > > (XEN) Boot stack: > > > ffffffff83063000->ffffffff83064000 > > > > > > > (XEN) TOTAL: > > > ffffffff80000000->ffffffff83400000 > > > > > > > (XEN) ENTRY ADDRESS: > ffffffff819c1200 > > > > > > > (XEN) Dom0 has maximum 12 VCPUs > > > > > > > (XEN) Scrubbing Free RAM: .done. > > > > > > > (XEN) Xen trace buffers: disabled > > > > > > > (XEN) Std. Loglevel: Errors and > warnings > > > > > > > (XEN) Guest Loglevel: Nothing > > (Rate-limited: > > > Errors and > > > > > warnings) > > > > > > > (XEN) Xen is relinquishing VGA > console. > > > > > > > (XEN) *** Serial input -> DOM0 > (type > > 'CTRL-a' > > > three > > > > times to > > > > > switch > > > > > > input to Xen) > > > > > > > (XEN) Freed 128kB init memory. > > > > > > > mapping kernel into physical memory > > > > > > > Xen: setup ISA identity maps > > > > > > > about to get started... > > > > > > > Initializing cgroup subsys cpuset > > > > > > > Initializing cgroup subsys cpu > > > > > > > Linux version 2.6.32.9 > > > (kishore@xxxxxxxxxxxxxxxxxxxxx) > > > > (gcc > > > > > version > > > > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 > SMP > > Mon Mar > > > 15 > > > > 15:16:28 PDT > > > > > 2010 > > > > > > > Command line: ro > > root=/dev/VolGroup01/LogVol00 > > > > console=hvc0 > > > > > > earlyprintk=xen nomodeset > > > > > > > KERNEL supported cpus: > > > > > > > Intel GenuineIntel > > > > > > > AMD AuthenticAMD > > > > > > > Centaur CentaurHauls > > > > > > > BIOS-provided physical RAM map: > > > > > > > Xen: 0000000000000000 - > 000000000009d000 > > > (usable) > > > > > > > Xen: 000000000009d000 - > 0000000000100000 > > > (reserved) > > > > > > > Xen: 0000000000100000 - > 0000000066c0a000 > > > (usable) > > > > > > > Xen: 000000006d597000 - > 000000006d686000 > > > (reserved) > > > > > > > Xen: 000000006f598000 - > 000000006f59a000 > > > (reserved) > > > > > > > Xen: 000000006f59a000 - > 000000006f5af000 > > (ACPI > > > NVS) > > > > > > > Xen: 000000006f5af000 - > 000000006f5d9000 > > > (reserved) > > > > > > > Xen: 000000006f5d9000 - > 000000006f5f9000 > > (ACPI > > > data) > > > > > > > Xen: 000000006f5f9000 - > 000000006f6df000 > > (ACPI > > > NVS) > > > > > > > Xen: 000000006f6df000 - > 000000006f700000 > > (ACPI > > > data) > > > > > > > Xen: 000000006f700000 - > 0000000080000000 > > > (reserved) > > > > > > > Xen: 00000000a0000000 - > 00000000b0000000 > > > (reserved) > > > > > > > Xen: 00000000fc000000 - > 00000000fd000000 > > > (reserved) > > > > > > > Xen: 00000000fed1c000 - > 00000000fed20000 > > > (reserved) > > > > > > > Xen: 00000000ffc00000 - > 0000000100000000 > > > (reserved) > > > > > > > bootconsole [xenboot0] enabled > > > > > > > DMI 2.4 present. > > > > > > > last_pfn = 0x66c0a max_arch_pfn = > > 0x400000000 > > > > > > > init_memory_mapping: > > > 0000000000000000-0000000066c0a000 > > > > > > > RAMDISK: 026bb000 - 02d0d800 > > > > > > > ACPI: RSDP 00000000000f03f0 00024 > (v02 > > INTEL ) > > > > > > > ACPI: XSDT 000000006f6fe120 00064 > (v01 > > INTEL > > > THRLY > > > > 00000000 > > > > > > 01000013) > > > > > > > ACPI: FACP 000000006f6fd000 000F4 > (v04 > > INTEL > > > THRLY > > > > 00000000 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: DSDT 000000006f6f5000 074F1 > (v02 > > INTEL > > > THRLY > > > > 00000003 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: FACS 000000006f5f9000 00040 > > > > > > > ACPI: APIC 000000006f6f4000 001CC > (v02 > > INTEL > > > THRLY > > > > 00000000 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: MCFG 000000006f6f3000 0003C > (v01 > > INTEL > > > THRLY > > > > 00000001 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: HPET 000000006f6f2000 00038 > (v01 > > INTEL > > > THRLY > > > > 00000001 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: SLIT 000000006f6f1000 00030 > (v01 > > INTEL > > > THRLY > > > > 00000001 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: WDDT 000000006f6f0000 00040 > (v01 > > INTEL > > > THRLY > > > > 00000000 > > > > > MSFT > > > > > > 0100000D) > > > > > > > ACPI: SSDT 000000006f5d9000 1FDDC > (v01 > > INTEL > > > SSDT PM > > > > 00004000 > > > > > INTL > > > > > > 20061109) > > > > > > > ACPI: 000000006f6ee000 001D0 > (v01 > > INTEL > > > THRLY > > > > 00000001 > > > > > MSFT > > > > > > 0100000D) > > > > > > > No NUMA configuration found > > > > > > > Faking a node at > > > 0000000000000000-0000000066c0a000 > > > > > > > Bootmem setup node 0 > > > 0000000000000000-0000000066c0a000 > > > > > > > NODE_DATA [0000000000008000 - > > 000000000001ffff] > > > > > > > bootmap [0000000000020000 - > > 000000000002cd87] > > > pages d > > > > > > > (9 early reservations) ==> bootmem > > [0000000000 - > > > > 0066c0a000] > > > > > > > #0 [0000000000 - 0000001000] > BIOS data > > page > > > ==> > > > > [0000000000 > > > > > - > > > > > > 0000001000] > > > > > > > #1 [0003046000 - 0003063000] > XEN > > PAGETABLES > > > ==> > > > > [0003046000 > > > > > - > > > > > > 0003063000] > > > > > > > #2 [0000006000 - 0000008000] > > TRAMPOLINE > > > ==> > > > > [0000006000 > > > > > - > > > > > > 0000008000] > > > > > > > #3 [0001000000 - 000269ae98] > TEXT > > DATA BSS > > > ==> > > > > [0001000000 > > > > > - > > > > > > 000269ae98] > > > > > > > #4 [00026bb000 - 0002d0d800] > > RAMDISK > > > ==> > > > > [00026bb000 > > > > > - > > > > > > 0002d0d800] > > > > > > > #5 [0002d0e000 - 0003046000] > XEN START > > INFO > > > ==> > > > > [0002d0e000 > > > > > - > > > > > > 0003046000] > > > > > > > #6 [000269b000 - 000269b011] > > BRK > > > ==> > > > > [000269b000 > > > > > - > > > > > > 000269b011] > > > > > > > #7 [0000100000 - 000041a000] > > PGTABLE > > > ==> > > > > [0000100000 > > > > > - > > > > > > 000041a000] > > > > > > > #8 [0000001000 - 0000001030] > ACPI > > SLIT > > > ==> > > > > [0000001000 > > > > > - > > > > > > 0000001030] > > > > > > > found SMP MP-table at > [ffff8800000fd750] > > fd750 > > > > > > > Zone PFN ranges: > > > > > > > DMA 0x00000000 -> 0x00001000 > > > > > > > DMA32 0x00001000 -> 0x00100000 > > > > > > > Normal 0x00100000 -> 0x00100000 > > > > > > > Movable zone start PFN for each > node > > > > > > > early_node_map[2] active PFN ranges > > > > > > > 0: 0x00000000 -> 0x0000009d > > > > > > > 0: 0x00000100 -> 0x00066c0a > > > > > > > ACPI: PM-Timer IO Port: 0x408 > > > > > > > ACPI: LAPIC (acpi_id[0x00] > lapic_id[0x00] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x01] > lapic_id[0x02] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x02] > lapic_id[0x04] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x03] > lapic_id[0x10] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x04] > lapic_id[0x12] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x05] > lapic_id[0x14] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x06] > lapic_id[0x01] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x07] > lapic_id[0x03] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x08] > lapic_id[0x05] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x09] > lapic_id[0x11] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0a] > lapic_id[0x13] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0b] > lapic_id[0x15] > > > enabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0c] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0d] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0e] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x0f] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x10] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x11] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x12] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x13] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x14] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x15] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x16] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC (acpi_id[0x17] > lapic_id[0xff] > > > disabled) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high > level > > > lint[0x1]) > > > > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high > level > > > lint[0x1]) > > > > > > > ACPI: IOAPIC (id[0x08] > address[0xfec00000] > > > gsi_base[0]) > > > > > > > IOAPIC[0]: apic_id 8, version 0, > address > > > 0xfec00000, GSI > > > > 0-0 > > > > > > > ACPI: IOAPIC (id[0x09] > address[0xfec90000] > > > gsi_base[24]) > > > > > > > IOAPIC[1]: apic_id 9, version 0, > address > > > 0xfec90000, GSI > > > > 24-24 > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 > > global_irq 2 > > > dfl dfl) > > > > > > > ERROR: Unable to locate IOAPIC for > GSI 2 > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 > > global_irq 9 > > > high > > > > level) > > > > > > > ERROR: Unable to locate IOAPIC for > GSI 9 > > > > > > > Using ACPI (MADT) for SMP > configuration > > > information > > > > > > > ACPI: HPET id: 0x8086a401 base: > 0xfed00000 > > > > > > > SMP: Allowing 12 CPUs, 0 hotplug > CPUs > > > > > > > PM: Registered nosave memory: > > 000000000009d000 - > > > > > 0000000000100000 > > > > > > > Allocating PCI resources starting > at > > b0000000 > > > (gap: > > > > > b0000000:4c000000) > > > > > > > Booting paravirtualized kernel on > Xen > > > > > > > Xen version: 3.4.3-rc4-pre > (preserve-AD) > > (dom0) > > > > > > > NR_CPUS:512 nr_cpumask_bits:512 > > nr_cpu_ids:12 > > > > nr_node_ids:1 > > > > > > > PERCPU: Embedded 478 pages/cpu > > @ffff880005ebc000 > > > > s1928024 r8192 > > > > > d21672 > > > > > > u1957888 > > > > > > > pcpu-alloc: s1928024 r8192 d21672 > u1957888 > > > > alloc=478*4096 > > > > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 > [0] 03 > > [0] 04 > > > [0] 05 > > > > [0] 06 > > > > > [0] 07 > > > > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 > [0] 11 > > > > > > > Xen: using vcpu_info placement > > > > > > > Built 1 zonelists in Node order, > mobility > > > grouping on. > > > > Total > > > > > pages: > > > > > > 409291 > > > > > > > Policy zone: DMA32 > > > > > > > Kernel command line: ro > > > root=/dev/VolGroup01/LogVol00 > > > > > console=hvc0 > > > > > > earlyprintk=xen nomodeset > > > > > > > PID hash table entries: 4096 > (order: 3, > > 32768 > > > bytes) > > > > > > > Initializing CPU#0 > > > > > > > DMA: Placing 64MB software IO TLB > between > > > > ffff880007525000 - > > > > > > ffff88000b525000 > > > > > > > DMA: software IO TLB at phys > 0x7525000 - > > > 0xb525000 > > > > > > > xen_swiotlb_fixup: > buf=ffff880007525000 > > > size=67108864 > > > > > > > xen_swiotlb_fixup: > buf=ffff88000b585000 > > > size=32768 > > > > > > > Memory: 1514268k/1683496k available > (4654k > > kernel > > > code, > > > > 396k > > > > > absent, > > > > > > 168832k reserved, 3443k data, 3396k > init) > > > > > > > SLUB: Genslabs=14, HWalign=64, > Order=0-3, > > > MinObjects=0, > > > > > CPUs=12, > > > > > > Nodes=1 > > > > > > > Hierarchical RCU implementation. > > > > > > > NR_IRQS:4352 nr_irqs:3072 > > > > > > > Already setup the GSI :0 > > > > > > > Already setup the GSI :1 > > > > > > > Already setup the GSI :2 > > > > > > > Already setup the GSI :3 > > > > > > > Already setup the GSI :4 > > > > > > > Already setup the GSI :5 > > > > > > > Already setup the GSI :6 > > > > > > > Already setup the GSI :7 > > > > > > > Already setup the GSI :8 > > > > > > > Already setup the GSI :9 > > > > > > > Already setup the GSI :10 > > > > > > > Already setup the GSI :11 > > > > > > > Already setup the GSI :12 > > > > > > > Already setup the GSI :13 > > > > > > > Already setup the GSI :14 > > > > > > > Already setup the GSI :15 > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 > > global_irq 2 > > > dfl dfl) > > > > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 > > global_irq 9 > > > high > > > > level) > > > > > > > xen: sci override: source_irq=9 > > global_irq=9 > > > trigger=c > > > > > polarity=1 > > > > > > > xen_allocate_pirq: returning irq 9 > for gsi > > 9 > > > > > > > Already setup the GSI :9 > > > > > > > xen: acpi sci 9 > > > > > > > Console: colour VGA+ 80x25 > > > > > > > console [hvc0] enabled, bootconsole > > disabled > > > console > > > > [hvc0] > > > > > enabled, > > > > > > bootconsole disabled > > > > > > > Lock dependency validator: > Copyright (c) > > 2006 Red > > > Hat, > > > > Inc., > > > > > Ingo > > > > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 > ... > > > MAX_LOCK_DEPTH: > > > > > 48 > > > > > > ... MAX_LOCKDEP_KEYS: 8191 ... > > > CLASSHASH_SIZE: > > > > > 4096 ... > > > > > > MAX_LOCKDEP_ENTRIES: 16384 ... > > > MAX_LOCKDEP_CHAINS: > > > > 32768 > > > > > ... > > > > > > CHAINHASH_SIZE: 16384 > memory used > > by lock > > > > dependency > > > > > info: > > > > > > 6367 kB per task-struct memory > footprint: > > 2688 > > > bytes > > > > allocated > > > > > 17039360 > > > > > > bytes of page_cgroup please try > > > 'cgroup_disable=memory' > > > > option if > > > > > you > > > > > > don't want memory cgroups installing > Xen > > timer for > > > CPU 0 > > > > Detected > > > > > > 3200.206 MHz processor. Calibrating > delay > > loop > > > (skipped), > > > > value > > > > > > calculated using timer frequency.. > 6400.41 > > BogoMIPS > > > > (lpj=3200206) > > > > > > Security Framework initialized > SELinux: > > > Initializing. > > > > Dentry > > > > > cache hash > > > > > > table entries: 262144 (order: 9, > 2097152 > > bytes) > > > > Inode-cache hash > > > > > table > > > > > > entries: 131072 (order: 8, 1048576 > bytes) > > > Mount-cache hash > > > > table > > > > > > entries: 256 Initializing cgroup > subsys ns > > > Initializing > > > > cgroup > > > > > subsys > > > > > > cpuacct Initializing cgroup subsys > memory > > > Initializing > > > > cgroup > > > > > subsys > > > > > > devices Initializing cgroup subsys > freezer > > > Initializing > > > > cgroup > > > > > subsys > > > > > > net_cls CPU: L1 I cache: 32K, L1 D > cache: > > 32K CPU: > > > L2 > > > > cache: 256K > > > > > CPU: > > > > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 > CPU: > > > Unsupported > > > > number of > > > > > siblings > > > > > > 32 Performance Events: unsupported p6 > CPU > > model 44 > > > no PMU > > > > driver, > > > > > > software events only. lockdep: fixing > up > > > alternatives. SMP > > > > > alternatives: > > > > > > switching to UP code ACPI: Core > revision > > 20090903 > > > ftrace: > > > > > converting > > > > > > mcount calls to 0f 1f 44 00 00 > ftrace: > > allocating > > > 27971 > > > > entries > > > > > in 110 > > > > > > pages installing Xen timer for CPU 1 > > lockdep: > > > fixing up > > > > > alternatives. > > > > > > SMP alternatives: switching to SMP > code > > > Initializing CPU#1 > > > > CPU: > > > > > L1 I > > > > > > cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K > > > CPU: L3 > > > > cache: > > > > > 12288K > > > > > > CPU 1/0x0 -> Node 0 CPU: Unsupported > number > > of > > > siblings 32 > > > > > installing > > > > > > Xen timer for CPU 2 Initializing > CPU#2 CPU: > > L1 I > > > cache: > > > > 32K, L1 D > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K CPU > > > 2/0x0 -> > > > > Node 0 > > > > > CPU: > > > > > > Unsupported number of siblings 32 > installing > > Xen > > > timer for > > > > CPU 3 > > > > > > Initializing CPU#3 CPU: L1 I cache: > 32K, L1 > > D > > > cache: 32K > > > > CPU: L2 > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 > -> Node > > 0 CPU: > > > > Unsupported > > > > > number > > > > > > of siblings 32 installing Xen timer > for CPU > > 4 > > > Initializing > > > > CPU#4 > > > > > CPU: L1 > > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K > > > CPU: L3 > > > > cache: > > > > > 12288K > > > > > > CPU 4/0x0 -> Node 0 CPU: Unsupported > number > > of > > > siblings 32 > > > > > installing > > > > > > Xen timer for CPU 5 Initializing > CPU#5 CPU: > > L1 I > > > cache: > > > > 32K, L1 D > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K CPU > > > 5/0x0 -> > > > > Node 0 > > > > > CPU: > > > > > > Unsupported number of siblings 32 > installing > > Xen > > > timer for > > > > CPU 6 > > > > > > Initializing CPU#6 CPU: L1 I cache: > 32K, L1 > > D > > > cache: 32K > > > > CPU: L2 > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 > -> Node > > 0 CPU: > > > > Unsupported > > > > > number > > > > > > of siblings 32 installing Xen timer > for CPU > > 7 > > > Initializing > > > > CPU#7 > > > > > CPU: L1 > > > > > > I cache: 32K, L1 D cache: 32K CPU: L2 > cache: > > 256K > > > CPU: L3 > > > > cache: > > > > > 12288K > > > > > > CPU 7/0x0 -> Node 0 CPU: Unsupported > number > > of > > > siblings 32 > > > > > installing > > > > > > Xen timer for CPU 8 Initializing > CPU#8 CPU: > > L1 I > > > cache: > > > > 32K, L1 D > > > > > cache: > > > > > > 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K CPU > > > 8/0x0 -> > > > > Node 0 > > > > > CPU: > > > > > > Unsupported number of siblings 32 > installing > > Xen > > > timer for > > > > CPU 9 > > > > > > Initializing CPU#9 CPU: L1 I cache: > 32K, L1 > > D > > > cache: 32K > > > > CPU: L2 > > > > > cache: > > > > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 > -> Node > > 0 CPU: > > > > Unsupported > > > > > number > > > > > > of siblings 32 installing Xen timer > for CPU > > 10 > > > > Initializing > > > > > CPU#10 CPU: > > > > > > L1 I cache: 32K, L1 D cache: 32K CPU: > L2 > > cache: > > > 256K CPU: > > > > L3 > > > > > cache: > > > > > > 12288K CPU 10/0x0 -> Node 0 CPU: > Unsupported > > number > > > of > > > > siblings > > > > > 32 > > > > > > installing Xen timer for CPU 11 > Initializing > > CPU#11 > > > CPU: > > > > L1 I > > > > > cache: > > > > > > 32K, L1 D cache: 32K CPU: L2 cache: > 256K > > CPU: L3 > > > cache: > > > > 12288K > > > > > CPU > > > > > > 11/0x0 -> Node 0 CPU: Unsupported > number of > > > siblings 32 > > > > Brought > > > > > up 12 > > > > > > CPUs Grant table initialized > regulator: core > > > version 0.5 > > > > Time: > > > > > 14:45:00 > > > > > > Date: 03/16/10 NET: Registered > protocol > > family 16 > > > > > xenbus_probe_init ok > > > > > > ACPI FADT declares the system doesn't > > support PCIe > > > ASPM, > > > > so > > > > > disable it > > > > > > ACPI: bus type pci registered PCI: > MCFG > > > configuration 0: > > > > base > > > > > a0000000 > > > > > > segment 0 buses 0 - 255 PCI: MCFG > area at > > a0000000 > > > > reserved in > > > > > E820 PCI: > > > > > > Using MMCONFIG at a0000000 - afffffff > PCI: > > Using > > > > configuration > > > > > type 1 > > > > > > for base access bio: create slab > <bio-0> at > > 0 ACPI > > > Error: > > > > Field > > > > > [CPB3] > > > > > > at 96 exceeds Buffer [NULL] size 64 > (bits) > > > > > (20090903/dsopcode-596) ACPI > > > > > > Error (psparse-0537): Method > parse/execution > > failed > > > > [\_SB_._OSC] > > > > > (Node > > > > > > ffff880064e00c98), > AE_AML_BUFFER_LIMIT ACPI: > > > Interpreter > > > > enabled > > > > > ACPI: > > > > > > (supports S0 S1 S3 S4 S5) ACPI: Using > IOAPIC > > for > > > interrupt > > > > > routing ACPI > > > > > > Warning: Incorrect checksum in table > [ ] > > - 97, > > > should > > > > be DB > > > > > > (20090903/tbutils-314) ACPI: No dock > devices > > found. > > > ACPI: > > > > PCI > > > > > Root > > > > > > Bridge [PCI0] (0000:00) pci > 0000:00:01.0: > > PME# > > > supported > > > > from D0 > > > > > D3hot > > > > > > D3cold pci 0000:00:01.0: PME# > disabled pci > > > 0000:00:02.0: > > > > PME# > > > > > supported > > > > > > from D0 D3hot D3cold pci > 0000:00:02.0: PME# > > > disabled pci > > > > > 0000:00:03.0: > > > > > > PME# supported from D0 D3hot D3cold > pci > > > 0000:00:03.0: PME# > > > > > disabled pci > > > > > > 0000:00:04.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > > 0000:00:04.0: PME# > > > > > > disabled pci 0000:00:05.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold > > > > > pci > > > > > > 0000:00:05.0: PME# disabled pci > > 0000:00:06.0: PME# > > > > supported from > > > > > D0 > > > > > > D3hot D3cold pci 0000:00:06.0: PME# > disabled > > pci > > > > 0000:00:07.0: > > > > > PME# > > > > > > supported from D0 D3hot D3cold pci > > 0000:00:07.0: > > > PME# > > > > disabled > > > > > pci > > > > > > 0000:00:08.0: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > > 0000:00:08.0: PME# > > > > > > disabled pci 0000:00:09.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold > > > > > pci > > > > > > 0000:00:09.0: PME# disabled pci > > 0000:00:0a.0: PME# > > > > supported from > > > > > D0 > > > > > > D3hot D3cold pci 0000:00:0a.0: PME# > disabled > > pci > > > > 0000:00:13.0: > > > > > PME# > > > > > > supported from D0 D3hot D3cold pci > > 0000:00:13.0: > > > PME# > > > > disabled > > > > > pci > > > > > > 0000:00:1a.7: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > > 0000:00:1a.7: PME# > > > > > > disabled pci 0000:00:1c.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold > > > > > pci > > > > > > 0000:00:1c.0: PME# disabled pci > > 0000:00:1c.4: PME# > > > > supported from > > > > > D0 > > > > > > D3hot D3cold pci 0000:00:1c.4: PME# > disabled > > pci > > > > 0000:00:1c.5: > > > > > PME# > > > > > > supported from D0 D3hot D3cold pci > > 0000:00:1c.5: > > > PME# > > > > disabled > > > > > pci > > > > > > 0000:00:1d.7: PME# supported from D0 > D3hot > > D3cold > > > pci > > > > > 0000:00:1d.7: PME# > > > > > > disabled pci 0000:00:1f.0: quirk: > region > > 0400-047f > > > claimed > > > > by > > > > > ICH6 > > > > > > ACPI/GPIO/TCO pci 0000:00:1f.0: > quirk: > > region > > > 0500-053f > > > > claimed > > > > > by ICH6 > > > > > > GPIO pci 0000:00:1f.0: ICH7 LPC > Generic IO > > decode 1 > > > PIO at > > > > 0680 > > > > > (mask > > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC > Generic IO > > decode > > > 2 PIO > > > > at 0ca0 > > > > > (mask > > > > > > 000f) pci 0000:00:1f.0: ICH7 LPC > Generic IO > > decode > > > 3 PIO > > > > at 0600 > > > > > (mask > > > > > > 001f) pci 0000:00:1f.2: PME# > supported from > > D3hot > > > pci > > > > > 0000:00:1f.2: PME# > > > > > > disabled pci 0000:01:00.0: PME# > supported > > from D0 > > > D3hot > > > > D3cold > > > > > pci > > > > > > 0000:01:00.0: PME# disabled pci > > 0000:01:00.1: PME# > > > > supported from > > > > > D0 > > > > > > D3hot D3cold pci 0000:01:00.1: PME# > disabled > > pci > > > > 0000:0c:00.0: > > > > > disabling > > > > > > ASPM on pre-1.1 PCIe device. You can > enable > > it > > > with > > > > > 'pcie_aspm=force' > > > > > > pci 0000:00:1e.0: transparent bridge > ACPI: > > PCI Root > > > Bridge > > > > [PCI1] > > > > > > (0000:fe) ACPI: PCI Root Bridge > [PCI2] > > (0000:ff) > > > ACPI: PCI > > > > > Interrupt > > > > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 > 12 14 > > 15) > > > ACPI: PCI > > > > > Interrupt Link > > > > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 > 15) > > ACPI: PCI > > > > Interrupt > > > > > Link > > > > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 > 15) > > ACPI: PCI > > > > Interrupt > > > > > Link > > > > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 > 15) > > ACPI: PCI > > > > Interrupt > > > > > Link > > > > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 > 15) *0, > > > disabled. > > > > ACPI: PCI > > > > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 > 9 10 > > *11 12 > > > 14 15) > > > > ACPI: > > > > > PCI > > > > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 > 9 10 > > 11 12 14 > > > 15) > > > > *0, > > > > > disabled. > > > > > > ACPI: PCI Interrupt Link [LNKH] (IRQs > 3 4 5 > > 6 7 9 > > > *10 11 > > > > 12 14 > > > > > 15) > > > > > > xenbus_probe_backend_init bus > registered ok > > > > > xenbus_probe_frontend_init > > > > > > bus registered ok xen_balloon: > Initialising > > balloon > > > driver > > > > with > > > > > page > > > > > > order 0. vgaarb: device added: > > > > > > > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > > > > vgaarb: > > > > > loaded > > > > > > SCSI subsystem initialized usbcore: > > registered new > > > > interface > > > > > driver > > > > > > usbfs usbcore: registered new > interface > > driver hub > > > > usbcore: > > > > > registered > > > > > > new device driver usb PCI: Using ACPI > for > > IRQ > > > routing > > > > NetLabel: > > > > > > Initializing NetLabel: domain hash > size = > > 128 > > > NetLabel: > > > > > protocols = > > > > > > UNLABELED CIPSOv4 NetLabel: > unlabeled > > traffic > > > allowed by > > > > default > > > > > > Switching to clocksource xen kstop/0 > used > > greatest > > > stack > > > > depth: > > > > > 6568 > > > > > > bytes left kstop/1 used greatest > stack > > depth: 6536 > > > bytes > > > > left > > > > > pnp: PnP > > > > > > ACPI init ACPI: bus type pnp > registered > > > xen_allocate_pirq: > > > > > returning irq > > > > > > 8 for gsi 8 Already setup the GSI :8 > > > xen_allocate_pirq: > > > > returning > > > > > irq 13 > > > > > > for gsi 13 Already setup the GSI :13 > pnp: > > PnP ACPI: > > > found > > > > 13 > > > > > devices > > > > > > ACPI: ACPI bus type pnp unregistered > system > > 00:07: > > > ioport > > > > range > > > > > > 0x500-0x53f has been reserved system > 00:07: > > ioport > > > range > > > > > 0x400-0x47f has > > > > > > been reserved system 00:07: ioport > range > > > 0x800-0x81f has > > > > been > > > > > reserved > > > > > > system 00:07: ioport range > 0x2f8-0x2ff has > > been > > > reserved > > > > system > > > > > 00:07: > > > > > > iomem range 0xfed1c000-0xfed8bffe > could not > > be > > > reserved > > > > system > > > > > 00:07: > > > > > > iomem range 0xff000000-0xffffffff > could not > > be > > > reserved > > > > system > > > > > 00:07: > > > > > > iomem range 0xfee00000-0xfeefffff has > been > > reserved > > > system > > > > 00:07: > > > > > iomem > > > > > > range 0xfe900000-0xfe90001f has been > > reserved > > > system > > > > 00:07: iomem > > > > > range > > > > > > 0xfea00000-0xfea0001f has been > reserved > > system > > > 00:07: > > > > iomem range > > > > > > 0xfed1b000-0xfed1bfff has been > reserved pci > > > 0000:0c:00.0: > > > > BAR 6: > > > > > no > > > > > > parent found for of device > > [0xffff0000-0xffffffff] > > > pci > > > > > 0000:00:01.0: PCI > > > > > > bridge, secondary bus 0000:01 pci > > 0000:00:01.0: > > > IO > > > > window: > > > > > > 0x1000-0x1fff pci 0000:00:01.0: MEM > > window: > > > > > 0xb1900000-0xb19fffff pci > > > > > > 0000:00:01.0: PREFETCH window: > disabled > > pci > > > > 0000:00:02.0: PCI > > > > > bridge, > > > > > > secondary bus 0000:02 pci > 0000:00:02.0: IO > > > window: > > > > disabled pci > > > > > > 0000:00:02.0: MEM window: disabled > pci > > > 0000:00:02.0: > > > > PREFETCH > > > > > > window: disabled pci 0000:00:03.0: > PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:03 pci > > > > > > 0000:00:03.0: IO window: disabled > pci > > > 0000:00:03.0: > > > > MEM > > > > > window: > > > > > > disabled pci 0000:00:03.0: PREFETCH > > window: > > > disabled pci > > > > > 0000:00:04.0: > > > > > > PCI bridge, secondary bus 0000:04 pci > > 0000:00:04.0: > > > IO > > > > window: > > > > > > disabled pci 0000:00:04.0: MEM > window: > > disabled > > > pci > > > > > 0000:00:04.0: > > > > > > PREFETCH window: disabled pci > 0000:00:05.0: > > PCI > > > bridge, > > > > secondary > > > > > bus > > > > > > 0000:05 pci 0000:00:05.0: IO > window: > > disabled pci > > > > 0000:00:05.0: > > > > > MEM > > > > > > window: disabled pci 0000:00:05.0: > > PREFETCH > > > window: > > > > disabled > > > > > pci > > > > > > 0000:00:06.0: PCI bridge, secondary > bus > > 0000:06 pci > > > > 0000:00:06.0: > > > > > IO > > > > > > window: disabled pci 0000:00:06.0: > MEM > > window: > > > disabled > > > > pci > > > > > > 0000:00:06.0: PREFETCH window: > disabled > > pci > > > > 0000:00:07.0: PCI > > > > > bridge, > > > > > > secondary bus 0000:07 pci > 0000:00:07.0: IO > > > window: > > > > disabled pci > > > > > > 0000:00:07.0: MEM window: disabled > pci > > > 0000:00:07.0: > > > > PREFETCH > > > > > > window: disabled pci 0000:00:08.0: > PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:08 pci > > > > > > 0000:00:08.0: IO window: disabled > pci > > > 0000:00:08.0: > > > > MEM > > > > > window: > > > > > > disabled pci 0000:00:08.0: PREFETCH > > window: > > > disabled pci > > > > > 0000:00:09.0: > > > > > > PCI bridge, secondary bus 0000:09 pci > > 0000:00:09.0: > > > IO > > > > window: > > > > > > 0x3000-0x3fff pci 0000:00:09.0: MEM > > window: > > > > > 0xb1b00000-0xb1cfffff pci > > > > > > 0000:00:09.0: PREFETCH window: > > > > > 0x000000b1d00000-0x000000b1efffff pci > > > > > > 0000:00:0a.0: PCI bridge, secondary > bus > > 0000:0a pci > > > > 0000:00:0a.0: > > > > > IO > > > > > > window: disabled pci 0000:00:0a.0: > MEM > > window: > > > disabled > > > > pci > > > > > > 0000:00:0a.0: PREFETCH window: > disabled > > pci > > > > 0000:00:1c.0: PCI > > > > > bridge, > > > > > > secondary bus 0000:0b pci > 0000:00:1c.0: IO > > > window: > > > > disabled pci > > > > > > 0000:00:1c.0: MEM window: disabled > pci > > > 0000:00:1c.0: > > > > PREFETCH > > > > > > window: disabled pci 0000:00:1c.4: > PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:0c pci > > > > > > 0000:00:1c.4: IO window: disabled > pci > > > 0000:00:1c.4: > > > > MEM > > > > > window: > > > > > > 0xb1000000-0xb18fffff pci > 0000:00:1c.4: > > PREFETCH > > > window: > > > > > > 0x000000b0000000-0x000000b0ffffff pci > > 0000:00:1c.5: > > > PCI > > > > bridge, > > > > > > secondary bus 0000:0d pci > 0000:00:1c.5: IO > > > window: > > > > disabled pci > > > > > > 0000:00:1c.5: MEM window: disabled > pci > > > 0000:00:1c.5: > > > > PREFETCH > > > > > > window: disabled pci 0000:00:1e.0: > PCI > > bridge, > > > secondary > > > > bus > > > > > 0000:0e pci > > > > > > 0000:00:1e.0: IO window: disabled > pci > > > 0000:00:1e.0: > > > > MEM > > > > > window: > > > > > > disabled pci 0000:00:1e.0: PREFETCH > > window: > > > disabled pci > > > > > 0000:00:01.0: > > > > > > PCI INT A -> GSI 28 (level, low) -> > IRQ 28 > > pci > > > > 0000:00:02.0: PCI > > > > > INT A > > > > > > -> GSI 29 (level, low) -> IRQ 29 pci > > 0000:00:03.0: > > > PCI INT > > > > A -> > > > > > GSI 24 > > > > > > (level, low) -> IRQ 24 pci > 0000:00:04.0: PCI > > INT A > > > -> GSI > > > > 25 > > > > > (level, > > > > > > low) -> IRQ 25 pci 0000:00:05.0: PCI > INT A > > -> GSI > > > 26 > > > > (level, low) > > > > > -> IRQ > > > > > > 26 pci 0000:00:06.0: PCI INT A -> GSI > 27 > > (level, > > > low) -> > > > > IRQ 27 > > > > > pci > > > > > > 0000:00:07.0: PCI INT A -> GSI 30 > (level, > > low) -> > > > IRQ 30 > > > > pci > > > > > > 0000:00:08.0: PCI INT A -> GSI 31 > (level, > > low) -> > > > IRQ 31 > > > > pci > > > > > > 0000:00:09.0: PCI INT A -> GSI 32 > (level, > > low) -> > > > IRQ 32 > > > > pci > > > > > > 0000:00:0a.0: PCI INT A -> GSI 33 > (level, > > low) -> > > > IRQ 33 > > > > pci > > > > > > 0000:00:1c.0: PCI INT A -> GSI 16 > (level, > > low) -> > > > IRQ 16 > > > > > > xen_allocate_pirq: returning irq 16 > for gsi > > 16 > > > Already > > > > setup the > > > > > GSI :16 > > > > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 > > (level, low) > > > -> IRQ > > > > 16 pci > > > > > > 0000:00:1c.5: PCI INT B -> GSI 17 > (level, > > low) -> > > > IRQ 17 > > > > NET: > > > > > Registered > > > > > > protocol family 2 IP route cache hash > table > > > entries: 65536 > > > > > (order: 7, > > > > > > 524288 bytes) TCP established hash > table > > entries: > > > 262144 > > > > (order: > > > > > 10, > > > > > > 4194304 bytes) TCP bind hash table > entries: > > 65536 > > > (order: > > > > 10, > > > > > 4718592 > > > > > > bytes) TCP: Hash tables configured > > (established > > > 262144 > > > > bind > > > > > 65536) TCP > > > > > > reno registered NET: Registered > protocol > > family 1 > > > pci > > > > > 0000:01:00.0: > > > > > > Disabling L0s pci 0000:01:00.1: > Disabling > > L0s > > > Trying to > > > > unpack > > > > > rootfs > > > > > > image as initramfs... Freeing initrd > memory: > > 6474k > > > freed > > > > DMA-API: > > > > > > preallocated 32768 debug entries > DMA-API: > > debugging > > > > enabled by > > > > > kernel > > > > > > config PCI-DMA: Using software bounce > > buffering for > > > IO > > > > (SWIOTLB) > > > > > DMA: > > > > > > Placing 64MB software IO TLB between > > > ffff880007525000 - > > > > > ffff88000b525000 > > > > > > DMA: software IO TLB at phys > 0x7525000 - > > 0xb525000 > > > audit: > > > > > initializing > > > > > > netlink socket (disabled) type=2000 > > > > audit(1268750702.035:1): > > > > > initialized > > > > > > HugeTLB registered 2 MB page size, > > pre-allocated 0 > > > pages > > > > VFS: > > > > > Disk > > > > > > quotas dquot_6.5.2 Dquot-cache hash > table > > entries: > > > 512 > > > > (order 0, > > > > > 4096 > > > > > > bytes) msgmni has been set to 2970 > > cryptomgr_test > > > used > > > > greatest > > > > > stack > > > > > > depth: 5864 bytes left cryptomgr_test > used > > greatest > > > stack > > > > depth: > > > > > 5816 > > > > > > bytes left alg: No test for stdrng > (krng) > > Block > > > layer SCSI > > > > > generic (bsg) > > > > > > driver version 0.4 loaded (major 252) > io > > scheduler > > > noop > > > > > registered io > > > > > > scheduler anticipatory registered io > > scheduler > > > deadline > > > > > registered io > > > > > > scheduler cfq registered (default) > > pci_hotplug: PCI > > > Hot > > > > Plug PCI > > > > > Core > > > > > > version: 0.5 pciehp > 0000:00:09.0:pcie04: HPC > > > vendor_id > > > > 8086 > > > > > device_id > > > > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI > Express > > Hot Plug > > > > Controller > > > > > Driver > > > > > > version: 0.4 acpiphp: ACPI Hot Plug > PCI > > Controller > > > Driver > > > > > version: 0.5 > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > acpiphp_glue: Slot 2 already > registered by > > another > > > hotplug > > > > driver > > > > > > pci-stub: invalid id string "" input: > Sleep > > Button > > > as > > > > > > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > > > > ACPI: > > > > > Sleep > > > > > > Button [SLPB] input: Power Button as > > > > > > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: > > > Power > > > > Button > > > > > [PWRF] > > > > > > registering netback hpet_acpi_add: no > > address or > > > irqs in > > > > _CRS > > > > > > Non-volatile memory driver v1.3 Linux > > agpgart > > > interface > > > > v0.103 > > > > > Serial: > > > > > > 8250/16550 driver, 4 ports, IRQ > sharing > > enabled > > > > serial8250: ttyS1 > > > > > at I/O > > > > > > 0x2f8 (irq = 3) is a 16550A brd: > module > > loaded > > > loop: > > > > module > > > > > loaded > > > > > > input: Macintosh mouse button > emulation as > > > > > /devices/virtual/input/input2 > > > > > > ahci 0000:00:1f.2: PCI INT A -> GSI > 19 > > (level, low) > > > -> IRQ > > > > 19 > > > > > ahci > > > > > > 0000:00:1f.2: AHCI 0001.0200 32 slots > 6 > > ports 3 > > > Gbps 0x3f > > > > impl > > > > > SATA mode > > > > > > ahci 0000:00:1f.2: flags: 64bit ncq > sntf pm > > led clo > > > pio > > > > slum part > > > > > ccc > > > > > > ems scsi0 : ahci scsi1 : ahci scsi2 > : ahci > > scsi3 : > > > ahci > > > > scsi4 : > > > > > ahci > > > > > > scsi5 : ahci ata1: SATA max UDMA/133 > > irq_stat > > > 0x00400040, > > > > > connection > > > > > > status changed irq 2996 ata2: SATA > max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00180 irq 2996 ata3: SATA > max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00200 irq 2996 ata4: SATA > max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00280 irq 2996 ata5: SATA > max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00300 irq 2996 ata6: SATA > max > > UDMA/133 > > > abar > > > > > m2048@0xb1a00000 > > > > > > port 0xb1a00380 irq 2996 Fixed MDIO > Bus: > > probed > > > ehci_hcd: > > > > USB 2.0 > > > > > > 'Enhanced' Host Controller (EHCI) > Driver > > ehci_hcd > > > > 0000:00:1a.7: > > > > > PCI INT > > > > > > C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd > > > 0000:00:1a.7: > > > > EHCI > > > > > Host > > > > > > Controller ehci_hcd 0000:00:1a.7: new > USB > > bus > > > registered, > > > > > assigned bus > > > > > > number 1 ehci_hcd 0000:00:1a.7: debug > port 1 > > > ehci_hcd > > > > > 0000:00:1a.7: irq > > > > > > 18, io mem 0xb1a02000 ehci_hcd > 0000:00:1a.7: > > USB > > > 2.0 > > > > started, > > > > > EHCI 1.00 > > > > > > usb usb1: New USB device found, > > idVendor=1d6b, > > > > idProduct=0002 usb > > > > > usb1: > > > > > > New USB device strings: Mfr=3, > Product=2, > > > SerialNumber=1 > > > > usb > > > > > usb1: > > > > > > Product: EHCI Host Controller usb > usb1: > > > Manufacturer: > > > > Linux > > > > > 2.6.32.9 > > > > > > ehci_hcd usb usb1: SerialNumber: > > 0000:00:1a.7 usb > > > usb1: > > > > > configuration #1 > > > > > > chosen from 1 choice hub 1-0:1.0: USB > hub > > found hub > > > > 1-0:1.0: 6 > > > > > ports > > > > > > detected ehci_hcd 0000:00:1d.7: PCI > INT A -> > > GSI 23 > > > > (level, low) > > > > > -> IRQ > > > > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host > > Controller > > > ehci_hcd > > > > > 0000:00:1d.7: > > > > > > new USB bus registered, assigned bus > number > > 2 > > > ehci_hcd > > > > > 0000:00:1d.7: > > > > > > debug port 1 ehci_hcd 0000:00:1d.7: > irq 23, > > io mem > > > > 0xb1a01000 > > > > > ehci_hcd > > > > > > 0000:00:1d.7: USB 2.0 started, EHCI > 1.00 usb > > usb2: > > > New USB > > > > device > > > > > found, > > > > > > idVendor=1d6b, idProduct=0002 usb > usb2: New > > USB > > > device > > > > strings: > > > > > Mfr=3, > > > > > > Product=2, SerialNumber=1 usb usb2: > Product: > > EHCI > > > Host > > > > Controller > > > > > usb > > > > > > usb2: Manufacturer: Linux 2.6.32.9 > ehci_hcd > > usb > > > usb2: > > > > > SerialNumber: > > > > > > 0000:00:1d.7 usb usb2: configuration > #1 > > chosen from > > > 1 > > > > choice hub > > > > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 > ports > > > detected > > > > ohci_hcd: > > > > > USB 1.1 > > > > > > 'Open' Host Controller (OHCI) Driver > > uhci_hcd: USB > > > > Universal Host > > > > > > Controller Interface driver > > xen_allocate_pirq: > > > returning > > > > irq 16 > > > > > for gsi > > > > > > 16 Already setup the GSI :16 uhci_hcd > > 0000:00:1a.0: > > > PCI > > > > INT A -> > > > > > GSI 16 > > > > > > (level, low) -> IRQ 16 uhci_hcd > > 0000:00:1a.0: UHCI > > > Host > > > > > Controller > > > > > > uhci_hcd 0000:00:1a.0: new USB bus > > registered, > > > assigned > > > > bus > > > > > number 3 > > > > > > uhci_hcd 0000:00:1a.0: irq 16, io > base > > 0x000020e0 > > > usb > > > > usb3: New > > > > > USB > > > > > > device found, idVendor=1d6b, > idProduct=0001 > > usb > > > usb3: New > > > > USB > > > > > device > > > > > > strings: Mfr=3, Product=2, > SerialNumber=1 > > usb usb3: > > > > Product: UHCI > > > > > Host > > > > > > Controller usb usb3: Manufacturer: > Linux > > 2.6.32.9 > > > uhci_hcd > > > > usb > > > > > usb3: > > > > > > SerialNumber: 0000:00:1a.0 usb usb3: > > configuration > > > #1 > > > > chosen from > > > > > 1 > > > > > > choice hub 3-0:1.0: USB hub found hub > > 3-0:1.0: 2 > > > ports > > > > detected > > > > > uhci_hcd > > > > > > 0000:00:1a.1: PCI INT B -> GSI 21 > (level, > > low) -> > > > IRQ 21 > > > > uhci_hcd > > > > > > 0000:00:1a.1: UHCI Host Controller > uhci_hcd > > > 0000:00:1a.1: > > > > new USB > > > > > bus > > > > > > registered, assigned bus number 4 > uhci_hcd > > > 0000:00:1a.1: > > > > irq 21, > > > > > io base > > > > > > 0x000020c0 usb usb4: New USB device > found, > > > idVendor=1d6b, > > > > > idProduct=0001 > > > > > > usb usb4: New USB device strings: > Mfr=3, > > Product=2, > > > > > SerialNumber=1 usb > > > > > > usb4: Product: UHCI Host Controller > usb > > usb4: > > > > Manufacturer: Linux > > > > > > 2.6.32.9 uhci_hcd usb usb4: > SerialNumber: > > > 0000:00:1a.1 usb > > > > usb4: > > > > > > configuration #1 chosen from 1 choice > hub > > 4-0:1.0: > > > USB hub > > > > found > > > > > hub > > > > > > 4-0:1.0: 2 ports detected > xen_allocate_pirq: > > > returning irq > > > > 19 for > > > > > gsi 19 > > > > > > Already setup the GSI :19 uhci_hcd > > 0000:00:1a.2: > > > PCI INT D > > > > -> GSI > > > > > 19 > > > > > > (level, low) -> IRQ 19 uhci_hcd > > 0000:00:1a.2: UHCI > > > Host > > > > > Controller > > > > > > uhci_hcd 0000:00:1a.2: new USB bus > > registered, > > > assigned > > > > bus > > > > > number 5 > > > > > > uhci_hcd 0000:00:1a.2: irq 19, io > base > > 0x000020a0 > > > usb > > > > usb5: New > > > > > USB > > > > > > device found, idVendor=1d6b, > idProduct=0001 > > usb > > > usb5: New > > > > USB > > > > > device > > > > > > strings: Mfr=3, Product=2, > SerialNumber=1 > > usb usb5: > > > > Product: UHCI > > > > > Host > > > > > > Controller usb usb5: Manufacturer: > Linux > > 2.6.32.9 > > > uhci_hcd > > > > usb > > > > > usb5: > > > > > > SerialNumber: 0000:00:1a.2 usb usb5: > > configuration > > > #1 > > > > chosen from > > > > > 1 > > > > > > choice hub 5-0:1.0: USB hub found hub > > 5-0:1.0: 2 > > > ports > > > > detected > > > > > > xen_allocate_pirq: returning irq 23 > for gsi > > 23 > > > Already > > > > setup the > > > > > GSI :23 > > > > > > uhci_hcd 0000:00:1d.0: PCI INT A -> > GSI 23 > > (level, > > > low) -> > > > > IRQ 23 > > > > > > uhci_hcd 0000:00:1d.0: UHCI Host > Controller > > > uhci_hcd > > > > > 0000:00:1d.0: new > > > > > > USB bus registered, assigned bus > number 6 > > uhci_hcd > > > > 0000:00:1d.0: > > > > > irq 23, > > > > > > io base 0x00002080 usb usb6: New USB > device > > found, > > > > idVendor=1d6b, > > > > > > idProduct=0001 usb usb6: New USB > device > > strings: > > > Mfr=3, > > > > > Product=2, > > > > > > SerialNumber=1 usb usb6: Product: > UHCI Host > > > Controller usb > > > > usb6: > > > > > > Manufacturer: Linux 2.6.32.9 uhci_hcd > usb > > usb6: > > > > SerialNumber: > > > > > > 0000:00:1d.0 usb usb6: configuration > #1 > > chosen from > > > 1 > > > > choice hub > > > > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 > ports > > > detected > > > > > xen_allocate_pirq: > > > > > > returning irq 19 for gsi 19 Already > setup > > the GSI > > > :19 > > > > uhci_hcd > > > > > > 0000:00:1d.1: PCI INT B -> GSI 19 > (level, > > low) -> > > > IRQ 19 > > > > uhci_hcd > > > > > > 0000:00:1d.1: UHCI Host Controller > uhci_hcd > > > 0000:00:1d.1: > > > > new USB > > > > > bus > > > > > > registered, assigned bus number 7 > uhci_hcd > > > 0000:00:1d.1: > > > > irq 19, > > > > > io base > > > > > > 0x00002060 usb usb7: New USB device > found, > > > idVendor=1d6b, > > > > > idProduct=0001 > > > > > > usb usb7: New USB device strings: > Mfr=3, > > Product=2, > > > > > SerialNumber=1 usb > > > > > > usb7: Product: UHCI Host Controller > usb > > usb7: > > > > Manufacturer: Linux > > > > > > 2.6.32.9 uhci_hcd usb usb7: > SerialNumber: > > > 0000:00:1d.1 usb > > > > usb7: > > > > > > configuration #1 chosen from 1 choice > hub > > 7-0:1.0: > > > USB hub > > > > found > > > > > hub > > > > > > 7-0:1.0: 2 ports detected > xen_allocate_pirq: > > > returning irq > > > > 18 for > > > > > gsi 18 > > > > > > Already setup the GSI :18 uhci_hcd > > 0000:00:1d.2: > > > PCI INT C > > > > -> GSI > > > > > 18 > > > > > > (level, low) -> IRQ 18 uhci_hcd > > 0000:00:1d.2: UHCI > > > Host > > > > > Controller > > > > > > uhci_hcd 0000:00:1d.2: new USB bus > > registered, > > > assigned > > > > bus > > > > > number 8 > > > > > > uhci_hcd 0000:00:1d.2: irq 18, io > base > > 0x00002040 > > > usb > > > > usb8: New > > > > > USB > > > > > > device found, idVendor=1d6b, > idProduct=0001 > > usb > > > usb8: New > > > > USB > > > > > device > > > > > > strings: Mfr=3, Product=2, > SerialNumber=1 > > usb usb8: > > > > Product: UHCI > > > > > Host > > > > > > > > > > References > > > > > > Visible links > > > 1. mailto:[20][21]pasik@xxxxxx > > > 2. mailto:[21][22]pasik@xxxxxx > > > 3. mailto:[22][23]pasik@xxxxxx > > > 4. mailto:[23][24]pasik@xxxxxx > > > 5. mailto:[24][25]pasik@xxxxxx > > > 6. > > > [25][26]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 7. > > > > [26][27]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 8. mailto:[27][28]pasik@xxxxxx > > > 9. > > > [28][29]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 10. > > > > [29][30]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 11. mailto:[30][31]pasik@xxxxxx > > > 12. mailto:[31][32]pasik@xxxxxx > > > 13. > > > [32][33]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 14. > > > > [33][34]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 15. mailto:[34][35]pasik@xxxxxx > > > 16. > > > [35][36]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 17. > > > > [36][37]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 18. mailto:[37][38]pasik@xxxxxx > > > > References > > > > Visible links > > 1. mailto:[39]pasik@xxxxxx > > 2. mailto:[40]pasik@xxxxxx > > 3. mailto:[41]pasik@xxxxxx > > 4. mailto:[42]pasik@xxxxxx > > 5. mailto:[43]pasik@xxxxxx > > 6. mailto:[44]pasik@xxxxxx > > 7. > [45]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 8. > > [46]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 9. mailto:[47]pasik@xxxxxx > > 10. > [48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 11. > > [49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 12. mailto:[50]pasik@xxxxxx > > 13. mailto:[51]pasik@xxxxxx > > 14. > [52]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 15. > > [53]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 16. mailto:[54]pasik@xxxxxx > > 17. > [55]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 18. > > [56]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 19. mailto:[57]pasik@xxxxxx > > 20. mailto:[58]pasik@xxxxxx > > 21. mailto:[59]pasik@xxxxxx > > 22. mailto:[60]pasik@xxxxxx > > 23. mailto:[61]pasik@xxxxxx > > 24. mailto:[62]pasik@xxxxxx > > 25. > [63]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 26. > > [64]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 27. mailto:[65]pasik@xxxxxx > > 28. > [66]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 29. > > [67]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 30. mailto:[68]pasik@xxxxxx > > 31. mailto:[69]pasik@xxxxxx > > 32. > [70]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 33. > > [71]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 34. mailto:[72]pasik@xxxxxx > > 35. > [73]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 36. > > [74]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 37. mailto:[75]pasik@xxxxxx > > References > > Visible links > 1. mailto:pasik@xxxxxx > 2. mailto:pasik@xxxxxx > 3. mailto:pasik@xxxxxx > 4. mailto:pasik@xxxxxx > 5. mailto:pasik@xxxxxx > 6. mailto:pasik@xxxxxx > 7. mailto:pasik@xxxxxx > 8. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 9. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 10. mailto:pasik@xxxxxx > 11. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 12. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 13. mailto:pasik@xxxxxx > 14. mailto:pasik@xxxxxx > 15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 16. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 17. mailto:pasik@xxxxxx > 18. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 19. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 20. mailto:pasik@xxxxxx > 21. mailto:pasik@xxxxxx > 22. mailto:pasik@xxxxxx > 23. mailto:pasik@xxxxxx > 24. mailto:pasik@xxxxxx > 25. mailto:pasik@xxxxxx > 26. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 27. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 28. mailto:pasik@xxxxxx > 29. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 30. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 31. mailto:pasik@xxxxxx > 32. mailto:pasik@xxxxxx > 33. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 34. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 35. mailto:pasik@xxxxxx > 36. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 37. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 38. mailto:pasik@xxxxxx > 39. mailto:pasik@xxxxxx > 40. mailto:pasik@xxxxxx > 41. mailto:pasik@xxxxxx > 42. mailto:pasik@xxxxxx > 43. mailto:pasik@xxxxxx > 44. mailto:pasik@xxxxxx > 45. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 46. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 47. mailto:pasik@xxxxxx > 48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 49. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 50. mailto:pasik@xxxxxx > 51. mailto:pasik@xxxxxx > 52. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 53. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 54. mailto:pasik@xxxxxx > 55. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 56. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 57. mailto:pasik@xxxxxx > 58. mailto:pasik@xxxxxx > 59. mailto:pasik@xxxxxx > 60. mailto:pasik@xxxxxx > 61. mailto:pasik@xxxxxx > 62. mailto:pasik@xxxxxx > 63. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 64. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 65. mailto:pasik@xxxxxx > 66. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 67. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 68. mailto:pasik@xxxxxx > 69. mailto:pasik@xxxxxx > 70. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 71. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 72. mailto:pasik@xxxxxx > 73. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 74. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 75. mailto:pasik@xxxxxx _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |