[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] No network-interface to the outside world in domain 0



*argl* now with attachments even attached :)

         ...Frank
Linux version 2.4.25-IDMT (root@xxxxxxxxxxxxxxxxxxxx) (gcc version 3.2.2 
(Mandrake Linux 9.2 3.2.2-5mdk)) #4 Mon Apr 5 16:17:15 CEST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda7 ro resume=/dev/hda1
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1533.430 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3060.53 BogoMIPS
Memory: 516076k/524224k available (1260k kernel code, 7760k reserved, 513k 
data, 108k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1800+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1533.4872 MHz.
..... host bus clock speed is 266.6932 MHz.
cpu: 0, clocks: 2666932, slice: 1333466
CPU0<T0:2666928,T1:1333456,D:6,S:1333466,C:2666932>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb240, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3099] at 00:00.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI 
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Non-volatile memory driver v1.2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@xxxxxx>
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:pio
hda: ST380021A, ATA DISK drive
blk: queue c03033e0, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
Partition check:
 hda:<7>ldm_validate_partition_table(): Found an MS-DOS partition table, not a 
dynamic disk.
 hda1 hda4 < hda5 hda6 hda7 >
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 108k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:55:18 Apr  5 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
Adding Swap: 2104504k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
imm: Version 2.05 (for Linux 2.4.0)
SCSI subsystem driver Revision: 1.00
ppa: Version 2.07 (for Linux 2.4.x)
WARNING - no ppa compatible devices found.
  As of 31/Aug/1998 Iomega started shipping parallel
  port ZIP drives with a different interface which is
  supported by the imm (ZIP Plus) driver. If the
  cable is marked with "AutoDetect", this is what has
  happened.
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
  originally by Donald Becker <becker@xxxxxxxxx>
  http://www.scyld.com/network/natsemi.html
  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
eth0: NatSemi DP8381[56] at 0xe0934000, 00:09:5b:0a:b8:07, IRQ 11.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
i2c-core.o: i2c core module version 2.8.4 (20040207)
i2c-proc.o version 2.8.4 (20040207)
i2c-core.o: i2c core module version 2.8.4 (20040207)
i2c-i801 version 2.8.4 (20040207)
i2c-core.o: i2c core module version 2.8.4 (20040207)
i2c-isa.o version 2.8.4 (20040207)
i2c-proc.o version 2.8.4 (20040207)
eeprom.o version 2.8.4 (20040207)
smsc47m1.o version 2.8.4 (20040207)
smsc47m1.o: SMSC 47M1xx not detected, module not inserted.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
Intel ICH soundcard not found or device busy
RME Hammerfall-DSP: no cards found
SCSI subsystem driver Revision: 1.00
imm: Version 2.05 (for Linux 2.4.0)
ppa: Version 2.07 (for Linux 2.4.x)
WARNING - no ppa compatible devices found.
  As of 31/Aug/1998 Iomega started shipping parallel
  port ZIP drives with a different interface which is
  supported by the imm (ZIP Plus) driver. If the
  cable is marked with "AutoDetect", this is what has
  happened.

  

/proc/pci:
  
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] (rev 0).
      Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
  Bus  0, device   1, function  0:
    PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (rev 
0).
      Master Capable.  No bursts.  Min Gnt=12.
  Bus  0, device   8, function  0:
    Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) 
Ethernet Controller (rev 0).
      IRQ 11.
      Master Capable.  Latency=32.  Min Gnt=11.Max Lat=52.
      I/O at 0xd000 [0xd0ff].
      Non-prefetchable 32 bit memory at 0xe3000000 [0xe3000fff].
  Bus  0, device  17, function  0:
    ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge (rev 0).
  Bus  0, device  17, function  1:
    IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C 
PIPC Bus Master IDE (rev 6).
      Master Capable.  Latency=32.  
      I/O at 0xd400 [0xd40f].
  Bus  0, device  17, function  2:
    USB Controller: VIA Technologies, Inc. USB (rev 35).
      IRQ 11.
      Master Capable.  Latency=32.  
      I/O at 0xd800 [0xd81f].
  Bus  0, device  17, function  3:
    USB Controller: VIA Technologies, Inc. USB (#2) (rev 35).
      IRQ 11.
      Master Capable.  Latency=32.  
      I/O at 0xdc00 [0xdc1f].
  Bus  0, device  17, function  5:
    Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 
Audio Controller (rev 64).
      IRQ 5.
      I/O at 0xe000 [0xe0ff].
  Bus  1, device   0, function  0:
    VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] 
(rev 178).
      IRQ 11.
      Master Capable.  Latency=32.  Min Gnt=5.Max Lat=1.
      Non-prefetchable 32 bit memory at 0xe0000000 [0xe0ffffff].
      Prefetchable 32 bit memory at 0xd8000000 [0xdfffffff].
Linux version 2.6.7_ATHLON_SMP-IDMT (root@il028) (gcc version 3.4.1 
(Mandrakelinux (Cooker) 3.4.1-1mdk)) #1 SMP Mon Jul 5 18:31:19 CEST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 VIA694                                    ) @ 0x000f6bb0
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
Built 1 zonelists
Kernel command line: root=/dev/hda7 ro resume=/dev/hda1
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1534.010 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 515232k/524224k available (2352k kernel code, 8228k reserved, 905k 
data, 272k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3022.84 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: AMD Athlon(tm) XP 1800+ stepping 02
per-CPU timeslice cutoff: 731.40 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1533.0157 MHz.
..... host bus clock speed is 266.0636 MHz.
Brought up 1 CPUs
CPU0:  online
 domain 0: span 01
  groups: 01
  domain 1: span 01
   groups: 01
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfb240, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
spurious 8259A interrupt: IRQ7.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbd50
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbd80, dseg 0xf0000
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: Using ACPI for IRQ routing
Machine check exception polling timer started.
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.14 [Flags: R/W DEBUG].
udf: registering filesystem
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
xd: Out of memory.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:pio
hda: ST380021A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
 hda: hda1 hda4 < hda5 hda6 hda7 >
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 272k freed
Real Time Clock Driver v1.12
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:11.2: irq 11, io base 0000d800
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller 
(#2)
uhci_hcd 0000:00:11.3: irq 11, io base 0000dc00
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
EXT3 FS on hda7, internal journal
Adding 2104504k swap on /dev/hda1.  Priority:-1 extents:1
imm: Version 2.05 (for Linux 2.4.0)
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
st: Version 20040403, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.1
osst :I: $Id: osst.c,v 1.70 2003/12/23 14:22:12 wriede Exp $
ppa: Version 2.07 (for Linux 2.4.x)
Linux agpgart interface v0.100 (c) Dave Jones
usbcore: deregistering driver usb-storage
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
  originally by Donald Becker <becker@xxxxxxxxx>
  http://www.scyld.com/network/natsemi.html
  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
eth0: NatSemi DP8381[56] at 0xe0897000, 00:09:5b:0a:b8:07, IRQ 11.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03ed8e0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel



/proc/pci:

PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] (rev 0).
      Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
  Bus  0, device   1, function  0:
    PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (rev 
0).
      Master Capable.  No bursts.  Min Gnt=12.
  Bus  0, device   8, function  0:
    Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) 
Ethernet Controller (rev 0).
      IRQ 11.
      Master Capable.  Latency=32.  Min Gnt=11.Max Lat=52.
      I/O at 0xd000 [0xd0ff].
      Non-prefetchable 32 bit memory at 0xe3000000 [0xe3000fff].
  Bus  0, device  17, function  0:
    ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge (rev 0).
  Bus  0, device  17, function  1:
    IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C 
PIPC Bus Master IDE (rev 6).
      IRQ 11.
      Master Capable.  Latency=32.  
      I/O at 0xd400 [0xd40f].
  Bus  0, device  17, function  2:
    USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller 
(rev 35).
      IRQ 11.
      Master Capable.  Latency=32.  
      I/O at 0xd800 [0xd81f].
  Bus  0, device  17, function  3:
    USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller 
(#2) (rev 35).
      IRQ 11.
      Master Capable.  Latency=32.  
      I/O at 0xdc00 [0xdc1f].
  Bus  0, device  17, function  5:
    Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 
Audio Controller (rev 64).
      IRQ 5.
      I/O at 0xe000 [0xe0ff].
  Bus  1, device   0, function  0:
    VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] 
(rev 178).
      IRQ 11.
      Master Capable.  Latency=32.  Min Gnt=5.Max Lat=1.
      Non-prefetchable 32 bit memory at 0xe0000000 [0xe0ffffff].
      Prefetchable 32 bit memory at 0xd8000000 [0xdfffffff].
xm dmesg:

 __  __            ____    ___     _          _        
 \ \/ /___ _ __   |___ \  / _ \   | |__   ___| |_ __ _ 
  \  // _ \ '_ \    __) || | | |__| '_ \ / _ \ __/ _` |
  /  \  __/ | | |  / __/ | |_| |__| |_) |  __/ || (_| |
 /_/\_\___|_| |_| |_____(_)___/   |_.__/ \___|\__\__,_|
                                                       
 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 2.0-beta (root@xxxxxxxxxxxxxx) (gcc version 3.4.1 (Mandrakelinux 
(Alpha 3.4.1-3mdk)) Wed Oct 6 13:02:11 CEST 2004

(XEN) Initialised 511MB memory (131056 pages) on a 511MB machine
(XEN) Xen heap size is 10784KB
(XEN) CPU0: Before vendor init, caps: 0383f9ff c1c3f9ff 00000000, vendor = 2
(XEN) CPU caps: 0383f9ff c1c3f9ff 00000000 00000000
(XEN) ACPI: RSDP (v000 VIA694                                    ) @ 0x000f6bb0
(XEN) ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
(XEN) ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
(XEN) ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) Initializing CPU#0
(XEN) Detected 1533.420 MHz processor.
(XEN) Local APIC disabled by BIOS -- reenabling.
(XEN) Found and enabled local APIC!
(XEN) CPU0: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2
(XEN) CPU caps: 0383fbff c1c3fbff 00000000 00000000
(XEN) CPU0 booted
(XEN) SMP motherboard not detected.
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) Using local APIC timer interrupts.
(XEN) Calibrating APIC timer for CPU0...
(XEN) ..... CPU speed is 1533.4064 MHz.
(XEN) ..... Bus speed is 266.6793 MHz.
(XEN) ..... bus_scale = 0x00011123
(XEN) Time init:
(XEN) .... System Time: 12158076ns
(XEN) .... cpu_freq:    00000000:5B662528
(XEN) .... scale:       00000001:4DE4DC6A
(XEN) .... Wall Clock:  1097075606s 30000us
(XEN) PCI: PCI BIOS revision 2.10 entry at 0xfb240, last bus=1
(XEN) PCI: Using configuration type 1
(XEN) PCI: Probing PCI hardware
(XEN) PCI: Probing PCI hardware (bus 00)
(XEN) PCI: Using IRQ router default [1106/3099] at 00:00.0
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found: 
'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=2.0,VIRT_BASE=0xC0000000,LOADER=generic,PT_MODE_WRITABLE'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Kernel image:  02800000->02aa4e84
(XEN)  Initrd image:  00000000->00000000
(XEN)  Dom0 alloc.:   02c00000->0ac00000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: c0100000->c03d33dc
(XEN)  Init. ramdisk: c03d4000->c03d4000
(XEN)  Phys-Mach map: c03d4000->c03f4000
(XEN)  Page tables:   c03f4000->c03f7000
(XEN)  Start info:    c03f7000->c03f8000
(XEN)  Boot stack:    c03f8000->c03f9000
(XEN)  TOTAL:         c0000000->c0800000
(XEN)  ENTRY ADDRESS: c0100000
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to 
Xen).
(XEN) spurious 8259A interrupt: IRQ7.




xen-0 dmesg:

Linux version 2.6.8.1-xen0 (root@il108) (gcc version 3.4.1 (Mandrakelinux 
(Alpha 3.4.1-3mdk)) #1 Wed Oct 6 13:38:16 CEST 2004
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000008000000 (usable)
0MB HIGHMEM available.
128MB LOWMEM available.
On node 0 totalpages: 32768
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 28672 pages, LIFO batch:7
  HighMem zone: 0 pages, LIFO batch:1
DMI not present.
Built 1 zonelists
Kernel command line: root=/dev/hda7 ro console=tty0 vga=ask
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Xen reported: 1533.420 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 126444k/131072k available (1839k kernel code, 4440k reserved, 715k 
data, 112k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3060.53 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps:  0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps:        0283cbf1 c1c3fbff 00000000 00000020
CPU: AMD Athlon(tm) XP 1800+ stepping 02
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
NET: Registered protocol family 16
PCI: Using configuration type Xen
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: the driver 'system' has been registered
PCI: System does not support PCI
PCI: System does not support PCI
audit: initializing netlink socket (disabled)
audit(1097075606.540:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Xen virtual console successfully installed as ttyS
Event-channel device installed.
Initialising Xen netif backend
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
hda: ST380021A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63
 hda: hda1 hda4 < hda5 hda6 hda7 >
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 112k freed
Generic RTC Driver v1.07
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
EXT3 FS on hda7, internal journal
Adding 2104504k swap on /dev/hda1.  Priority:-1 extents:1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
  originally by Donald Becker <becker@xxxxxxxxx>
  http://www.scyld.com/network/natsemi.html
  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
SCSI subsystem initialized
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
ioperm not fully supported - set iopl to 3
ioperm not fully supported - ignore resource release
ioperm not fully supported - ignore resource release
ioperm not fully supported - ignore resource release


/proc/pci & /proc/bus/pci/devices is empty

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.