This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
Home Products Support Community News


Re: [Xen-users] PPPoE in DomU exits with error

To: Christian Lyra <lyra@xxxxxxxxxxxxx>, xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] PPPoE in DomU exits with error
From: kanour-xen <xen@xxxxxxxxxx>
Date: Fri, 23 Nov 2007 00:56:42 +1100
Delivery-date: Thu, 22 Nov 2007 05:57:31 -0800
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
In-reply-to: <4745887B.3020303@xxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <47400CC2.1090203@xxxxxxxxxx> <200711221036.17757.lyra@xxxxxxxxxxxxx> <47457AA6.1060506@xxxxxxxxxx> <200711221109.36884.lyra@xxxxxxxxxxxxx> <4745887B.3020303@xxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mozilla-Thunderbird (X11/20071009)
kanour-xen wrote:
Christian Lyra wrote:
 > fwx:/home/lyra# ethtool -i internet
 > driver: 8139too
 > version: 0.9.27
 > firmware-version:
 > bus-info: 0000:01:08.0

 I am assuming that your interface info was from DomU. I actually
 compared few machines and all real (hw - not xen created) interfaces
 have PHYD [some number]. I mean in dom0 and other non xen machines.

    Oh... yes... real hardware on domU (pciback).
 The problem is that I don't know what it means :-). Maybe there
should be some number and this indicates that it works as hardware
 Another question, do you run udev or hotplug on DomU? I don't.

    Yes. I do. From my z25_persistent-net.rules:

# Xen virtual device (8139too)
SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:e0:7d:d9:25:61", NAME="internet"

But i guess maybe you have a point about the pciex. But... as I understand you got the interface running right? if you plug the interface to your switch, it works?

Yes the interface runs fine and it works. I can ping the ADSL modem no problem as other devices on the same subnet.

Can you tell me one more thing in regards to bus-info above.
Does the number there corresponds to lspci number of the same device in dom0?

I have:
Dom0 - 0000:86:01.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)

alsfw01:~# ethtool -i eth2
 >  driver: e1000
 >  version: 7.1.9-k4-NAPI
 >  firmware-version: N/A
 >  bus-info: 0000:00:01.0

They don't correspond to each other.


Xen-users mailing list


As soon as I installed UDEV it started to work.

Thank you very much to all. 3 days of hard work for me and so stupid solution :-)

Thanks one more time to Christian who provide me comparison to his system.


Xen-users mailing list

<Prev in Thread] Current Thread [Next in Thread>