Re: [Xen-users] PPPoE in DomU exits with error
Christian Lyra wrote:
> Thanks very much for info.I am still working on it because I just cannot
figure it out. In dom0 pppoe is working fine. In domU it is not working.
Same kernel for both. Same automatic setup through pppoeconf.
I am wondering if the problem could be amd64 kernels?
i dont know what to say... but I´m sure that this is not amd64
related, or at least shouldnt be because my setup IS amd64! but I´m
using a compiled xen 3.1, not the distro package/kernel. Anyway... I
just remember about something very dumb... but doesnt hurt to ask. I
assume that you are using the same kernel on dom0 and on domU right?
did you had copy the /lib/modules/<kernel> from dom0 to domU? as pppoe
is a module, and need to be loaded on domU! on my "firewall" domU I
pppoe 19968 2
pppox 6672 1 pppoe
ppp_generic 34208 6 pppoe,pppox
slhc 10112 1 ppp_generic
I used xen-tools to create image, so the modules are there. Just to make
sure, I just deleted them and copy them over from dom0. It is still the
same.I believe that this is related to the hardware. This is real server
HP 145 DL2 with PCI-X and I am starting to believe that the PCI-X with
AMD chipset is the problem.
I am wondering how come it does work from dom0 and not from domU.
Could you copy me some info from your machine?
ethtool [interface where you run pppoe]
here is my interface:
alsfw01:~# ethtool -i eth2
alsfw01:~# ethtool eth2
Settings for eth2:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
Advertised auto-negotiation: Yes
Port: Twisted Pair
Supports Wake-on: umbg
Current message level: 0x00000007 (7)
Link detected: yes
Thanks. (I would need some xen guru for this) Where they are???
Xen-users mailing list