| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] PPPoE in DomU exits with error
kanour-xen wrote:
[STD]Ein wrote:
Here's what I 'can' tell you.
My previous setup used Debian Etch as the dom0, pciback to pass a nic
to a
domU, and Smoothwall 3.0 firewall distro as the domU. I used the Xen
provided Redhat kernel package for the domU, since Smoothwall is a
fork from
old Redhat, and copied the modules from it into the domU.
It just worked. Then, I just recently dist-upgrade'd to Lenny, and
installing the Xen 3.1 hypervisor, staying with the existing 3.04 kernels
(2.6.18-5-xen-686), and it still works.
I suspect your problems lie strictly with pppoe and not Xen, you might
want
to try hitting up the Roaring Pengiun forums (do they have a list?)
and see
what they can tell you. Of course, I'm no guru, I just pretend to
know what
I'm doing, so take my advice/info with a grain of salt.
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of kanour-xen
Sent: November 21, 2007 7:37 AM
To: Christian Lyra
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] PPPoE in DomU exits with error
kanour-xen wrote:
Christian Lyra wrote:
I am trying to setup my firewall in DomU. However, I have got a
>>> little problem. My *pon dsl-provider *exits with following
>>> message.
> My firewall is a domU too, but it has control of the interface
> connected to the internet, and pppoe works just fine. never tried
> to do this with a bridge...
>
What do you mean by domU has control over the interface?
I "hide" the interface from dom0 with pciback.hide=(xx:xx.x) in grub
and present it to domU with pci = [ 'xx:xx.x' ]. So the domU has
control of the real pci device.
I tried that already, but when I included pciback.hide=(xx:xx.x) in
grub the card was still present. So, I then unbound it from /sys/...
I included pci =[..... and started domU. It was still the same.
At this moment I don't know what to do, but I will try to reinstall
everything and try one more time with Debian Etch xen binary packages.
At this moment I am using Debian Lenny with binary xen from XenSource.
I am just wondering why the hiding with pciback.hide does not work
for me?
Jiri
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
So, I did reinstall everything to Debian Etch. I am running xen from
debian packages. But I just cannot make the pppoe work.
Please help!!!
I did hide the pci device on the boot. I checked that the driver
(e1000) is not loaded in Dom0.
I included pci statement in DomU config file. I checked that the
devide was recognised and driver was loaded in DomU.
I have it all on HP DL145 G2 server. There is AMD dual core processor,
2GB ram, 2x Broadcom network card and I added Intel PCI card in the
raiser board (PCI-X).
pppoeconf will discover pppoe on eth2 (intel 1G card) but when it
tries to establish the connection. it fails with:
Nov 18 09:44:40 alsfw01 pppd[1723]: Plugin rp-pppoe.so loaded.
Nov 18 09:44:40 alsfw01 pppd[1723]: Linux kernel does not support
PPPoE -- are you running 2.4.x?
Could anyone help me to troubleshoot it.
skype: linuxgo
Jiri
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
Hi.
Thanks very much for info.I am still working on it because I just cannot
figure it out. In dom0 pppoe is working fine. In domU it is not working.
Same kernel for both. Same automatic setup through pppoeconf.
I just don't know...
Jiri
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
I am wondering if the problem could be amd64 kernels?
Jiri
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home