BTW: Reproducable on a fresh install of Centos 5 on a different host.
Problem doesn't occur anymore in 3.1.
br
Walter
> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of
> Schober Walter
> Sent: Friday, May 18, 2007 2:10 PM
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Cc: Petersson, Mats
> Subject: RE: [Xen-users] How do I find out why Dom0 crashes
> on guest startup?
>
> Tested:
> 1. apic=0, vcpus=4 OK, no crash
>
> 2. apic=1, vcpus=1 OK, no crash
>
> 3. apic=1, vcpus=2 OK (?!?!?) But:
> (XEN) This hvm_vlapic is for P4, no work for De-assert init
> (XEN) (file=hvm.c, line=665) AP 1 bringup suceeded.
> (XEN) vmx_do_launch(): GUEST_CR3<=00fbd7a0, HOST_CR3<=cc3ae000
> (XEN) (GUEST: 4) Start AP 1 from 00006000 ...
> (XEN) (GUEST: 4) Starting emulated 16-bit real-mode: ip=0600:0000
>
> 4. apic=1, vcpus=4 NOK, but no crash anymore ?!?!?
> A lot of
> (XEN) <ioapic_inj_irq> error delivery mode 7
> and on the guest:
> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> Kenrel panic - not syncing: IO-APIC + timer doesn't work! Try
> using the
> noapic kernel parameter
>
> 5. apic=1, vcpus=4, 'xm create' right after reboot NOK, Dom0
> crashes as before
>
> 6. starting at least one another VM with apic=0 or commented
> out apic ->
> See 3. + 4., but no Dom0 crash.
>
> => Dom0 crashes only, if the hvm wasn't started with apic=0
> once before.
>
> That brings me back to time when I installed that VM: Installation was
> possible only with vcpus=1 (stale after Centos 5 Install
> Screen). After
> that I set vcpus=4 and rebootet the VM.
>
> On Wednesday I had to reboot the Dom0 for that HP management thing and
> started the VM the first time directly with apic=1, vcpus=4
> causing the
> crash. So it had nothing to do with the HP drivers nor QEMU package.
>
> I guess, I have to wait for a fix in the Xen kernel or maybe try to
> compile my own 3.0.4.
>
> Thanks, Mats for you help!
> br
> Walter
>
> -----Original Message-----
> From: Petersson, Mats [mailto:Mats.Petersson@xxxxxxx]
> Sent: Friday, May 18, 2007 1:22 PM
> To: Schober Walter; xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] How do I find out why Dom0 crashes on guest
> startup?
>
> [snip big log]
> > (XEN) Xen call trace:
> > (XEN) [<ffff830000142da7>] vlapic_range+0x7/0x30
>
> So, the code here does very few things (at least in the
> current version,
> but I doubt that the older code is MUCH different). This in turn means
> that it's pretty easy to determine what could be wrong:
> 1. VCPU = NULL - quite likely, as it's one of the first steps.
> 2. vlapic field in vcpu = NULL - even more likely.
>
> I'd try running your guest with "apic=0" to see if that makes any
> difference. [That will of course screw up SMP on your guest, but at
> least it will hopefully tell us if it's APIC that is a problem or not]
>
> I doubt that having installed a newer QEMU would make any difference.
>
> --
> Mats
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home