|
xen-users
Re: [Xen-users] Xen reboots
by the way, I did this install with the precompiled xen, earlyer i tryed from
source xen 3.0.1 without sucess either.
Zitat von Seneca <acenes@xxxxxxx>:
I cant see anything wrong in the setup, and since it boots without
problems with your ubuntu 2.6.12 kernel it *should* also work with
the xen 2.6.16. There have been discussions about similar problems
and possible solutions in the thread below:
http://ubuntuforums.org/showthread.php?t=25938
Btw. did you install the precompiled xen 3.0.2 distribution or did you
compile it from source?
Seneca
T> Hello Seneca
T> here is the requested information:
T> xen@ubuntu:~$ cat /etc/fstab
T> # /etc/fstab: static file system information.
T> #
T> # <file system> <mount point> <type> <options> <dump> <pass>
T> proc /proc proc defaults 0 0
T> /dev/md2 / ext3 defaults,errors=remount-ro 0
T> 1
T> /dev/md0 /boot ext3 defaults 0 2
T> /dev/md3 /srv ext3 defaults 0 2
T> /dev/md1 none swap sw 0 0
T> /dev/hdb /media/cdrom0 udf,iso9660 user,noauto 0 0
T> xen@ubuntu:~$
T> /boot/grub/menu.lst:
T> title Ubuntu, kernel 2.6.12-9-386
T> root (hd0,0)
T> kernel /vmlinuz-2.6.12-9-386 root=/dev/md2 ro quiet splash
T> initrd /initrd.img-2.6.12-9-386
T> savedefault
T> boot
T> title Xen 3.0 / XenLinux 2.6.16
T> root (hd0,0)
T> kernel /xen-3.0.2.gz noreboot dom0_mem=262144
T> module /vmlinuz-2.6.16-xen root=/dev/md2 ro console=tty0
T> module /initrd.img-2.6.16.xen
T> savedefault
T> boot
T> title Ubuntu, kernel 2.6.12-9-386 (recovery mode)
T> root (hd0,0)
T> kernel /vmlinuz-2.6.12-9-386 root=/dev/md2 ro single
T> initrd /initrd.img-2.6.12-9-386
T> boot
T> title Ubuntu, memtest86+
T> root (hd0,0)
T> kernel /memtest86+.bin
T> boot
T> and last the boot dir:
T> Am Dienstag, den 11.04.2006, 08:25 +0200 schrieb Seneca:
Hello Tulasi,
I see a misspeling in my suggestion, once it is
initrd.img-2.6.16-xen
and once
initrd.img-2.6.16.xen
It must be exactly the same of cause, otherwise the file will not be
found by grub.
T> mdadm: error opening /devfs/md/1: No such file or directory
T> mdadm: error opening /devfs/md/2: No such file or directory
Now this looks really odd. Could you post your /etc/fstab file,
the current menu.lst and a dir of /boot ?
Seneca
You wrote at Montag, 10. April 2006 23:57:
T> Thanks Seneca
T> still get error:
T> mdadm: error opening /devfs/md/1: No such file or directory
T> mdadm: error opening /devfs/md/2: No such file or directory
T> mount: devfs: not mounted
T> mount: unknown filesystem type "devfs"
T> ivot_root: No such file or directory
T> sbin/init: 428: cannot open dev/console: No such file
T> kernel panic: bla bla bla.....
T> regards
T> Am Sonntag, den 09.04.2006, 23:39 +0200 schrieb Seneca:
T> Hello Tulasi,
T> I think the problem is not the SATA driver, but that you are running
T> on a RAID (md2). As seen in your non-Xen booting, you are using a
T> initrd, so you also need to create and use one for your xen boot.
T> For Xen 3.0.2 it works this way:
T> depmod 2.6.16-xen
T> mkinitrd -o /boot/initrd.img-2.6.16.xen 2.6.16-xen
T> In menu.lst:
T> title Xen 3.0.2 / XenLinux 2.6.16
T> root (hd0,0)
T> kernel /boot/xen-3.0.2.gz dom0_mem=262144
T> module /boot/vmlinuz-2.6.16-xen root=/dev/md2 ro console=tty0
T> module /boot/initrd.img-2.6.16-xen
T> savedefault
T> boot
T> Seneca
T>> non of the kernels seems to understand my nVidia Sata controller:
T>> Cannot open root device "md2" or unknown block(0,0)
T>> please append a correct "root=" boot option
T>> kernel panic - not syncing: VFS: Unable to mount root fs on
T>> unknown-block(0,0)
T>> here is my grub conf.
T>> title Ubuntu, kernel 2.6.12-9-386
T>> root (hd0,0)
T>> kernel /vmlinuz-2.6.12-9-386 root=/dev/md2 ro quiet splash
T>> initrd /initrd.img-2.6.12-9-386
T>> savedefault
T>> boot
T>> title Xen 3.0 / XenLinux 2.6
T>> kernel /xen-3.0.1.gz noreboot
T>> module /vmlinuz-2.6.12.6-xen root=/dev/md2 ro console=tty0
T>> title Xen 3.0 / XenLinux 2.6
T>> kernel /xen-3.0.2.gz noreboot
T>> module /vmlinuz-2.6.16-xen root=/dev/md2 ro console=tty0
T>> strange Ubuntu 5.10 does recognize the harddrives not so the the
T> latest
T>> Ubuntu Dapper, same with Fedora4 and the latest Fedora5
T>> should i get just two IDE Harddisk?
T>> thanks
T>> Am Sonntag, den 09.04.2006, 15:29 +0200 schrieb Peter Fokkinga:
>>> Quoting Tulasi <kuzum@xxxxxxxxxx>:
>>> > I made a install of XEN but after booting into xen, it reboots
>>> > sometime later, without an information.
>>> >
>>> > does anyone know what to do.
>>> >
>>> Add 'noreboot' (without quotes) to the Xen commandline in your
>>> grub or lilo configuration. Now Xen will just halt when something
>>> goes wrong instead of immediately rebooting, thus allowing you
>>> to see what went wrong. See section 10.3 in the Xen users manual,
>>> http://www.cl.cam.ac.uk/Research/SRG/netos/xen/readmes/user/user.html
>>>
>>> It's quite possible that the 2.6.12 kernel does not support your
>>> nVidia SATA controller. I would recommend you try Xen 3.0.2 that
>>> was released a few days ago (it uses kernel 2.6.16). It can be
>>> found at http://www.cl.cam.ac.uk/Research/SRG/netos/xen/downloads
>>>
>>> Cheers, Peter
>>>
>>> _______________________________________________
>>> Xen-users mailing list
>>> Xen-users@xxxxxxxxxxxxxxxxxxx
>>> http://lists.xensource.com/xen-users
T>> _______________________________________________
T>> Xen-users mailing list
T>> Xen-users@xxxxxxxxxxxxxxxxxxx
T>> http://lists.xensource.com/xen-users
T> _______________________________________________
T> Xen-users mailing list
T> Xen-users@xxxxxxxxxxxxxxxxxxx
T> http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
--
Seneca
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
Home