WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] Re: bond/trunk in xen

To: Xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Re: bond/trunk in xen
From: Srija G <srijavg@xxxxxxxxx>
Date: Mon, 26 Jul 2010 13:52:03 -0400
Cc:
Delivery-date: Mon, 26 Jul 2010 10:53:45 -0700
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:received:in-reply-to :references:date:message-id:subject:from:to:content-type; bh=fT3IHa0hId08lpbb7QIty/zWECE/ntFAKwZtpNxysMo=; b=DTbcRYrVm+8rQVw0ZfBgeBoWlEjzHle8RKlshjf9xy0AoGMWyZu25OywGnrJADZdhW ISWNqG2NNAVR6MD4YWFx0ss9JqrsWitK5s7LXZ2TKonwrindgpEy6JCnVUK6Fid9WGNK lhpTq8W4gQgk1teAvDQPjZag2/qlNempVHau0=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type; b=p/PfwttjNiQTzmRNRJVGt+gRQ97/iVQanhKR8aTLOrUEKizmf5k8Aul+BzV57yf1HI 5ygurjKM2t/PjtRJruIhc2esFMFvy827yDNG2EwgoNMjxlRWG/+XgcYzb3I6gdtr/VPx CSr9qOOWBndQkK72XRsuXrkQj3K70pOI7DvCU=
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <AANLkTik4YZEJE4ktjQcPitktNkTbHLcli3CsB4Mu0bF1@xxxxxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <AANLkTik4YZEJE4ktjQcPitktNkTbHLcli3CsB4Mu0bF1@xxxxxxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Hi ,


I asked the following  question few  days back, but  did not  get  any reply. 

I am trying to set  bond/trunk with  mode=4, not successful still yet.  The  configuration  is  as
below  in the mail attached. 

After few  search  , found  rhel5.4  bonding module  has  few  issues.  Now the server is being upgraded
to rhel5.5.  But the issue  did not solve still yet. While rebooting the server   , in the dmesg  getting the
messages  as,

bonding: bond0: enslaving eth1 as a backup interface with a down link.
bnx2: eth1 NIC SerDes Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.

It will be really appreciated  if someone helps me to figuring out the problems.

Thanks again


On Fri, Jul 16, 2010 at 3:57 PM, Srija G <srijavg@xxxxxxxxx> wrote:

Hi ,

  I am trying to configure  bond/trunk  on RHEL 5.4 86_64 OS.
 The bond/trunk works  when I am using mode=1, ie fault-tolerance (active-backup)
 But when I am trying to configure with mode=4, ie 802.3ad Dynamic link aggregation,
  it is not working. 

  Here is the configuration I did:

  -  Considering one  port for bonding ,  now only eth1 as it is a test server has only one port 

  -  the 3 subnets are being considered 12- 14

  -  Included bonding drivers.  and the /etc/modprobe.conf mentioned the parameters as

     alias bond0 bonding
     options bond0 mode=4 miimon=100 lacp_rate=1

  -  In /etc/sysconfig/network-scripts area created few config files as follows;

      ifcfg-bond0  :  DEVICE=bond0
                      BOOTPROTO=none
                      >                      Type=Ethernet
        

      ifcfg-eth1   :  DEVICE=eth1   
                      USERCTL=no
                      >                      MASTER=bond0
                      BOOTPROTO=none
                      HWADDR=xx:xx:xx:xx:xx:xx 
                      SLAVE=yes

    
      ifcfg-bond0.12 :  DEVICE=bond0.12
                        >                        TYPE=Ethernet
                        BOOTPROTO=static
                        IPADDR=xxx.xx.xx.xx
                        NETMASK=255.255.255.0
                        VLAN=yes

      Similarly created ifcfg-bond0.13 and ifcfg-bond.14 like ifcfg-bond0.12

   -  Here is the switch side configuration:

      interface Port-channel60
      description <server> trunk/channel
      switchport trunk allowed vlan 1,12-14,460
      switchport mode trunk
      spanning-tree portfast trunk
      end

      xxx-es-bcs1#sh run int g1/0/4        
      Building configuration...

      Current configuration : 192 bytes
       !
      interface GigabitEthernet1/0/4
      description <server> trunk
      switchport trunk allowed vlan 1,12-14,460
      switchport mode trunk
      channel-group 60 mode active
      spanning-tree portfast trunk
      end

   -  Kept  tag 460 for future use ..

   -  I am getting the file  in /proc/net/bonding/pbond0  not bond0,  here is the display

      Ethernet Channel Bonding Driver: v3.4.0 (October 7, 2008)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2 (0)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0

802.3ad info
LACP rate: fast
Active Aggregator Info:
        Aggregator ID: 1
        Number of ports: 1
        Actor Key: 17
        Partner Key: 1
        Partner Mac Address: 00:00:00:00:00:00

Slave Interface: eth1
MII Status: up
Link Failure Count: 0
Permanent HW addr: xx:xx:xx:xx:xx:xx
Aggregator ID: 1

    -  here is the display  of /proc/net/vlan/bond0.12


pbond0.12  VID: 12       REORDER_HDR: 1  dev->priv_flags: 81
         total frames received            0
          total bytes received            0
      Broadcast/Multicast Rcvd            0

      total frames transmitted           68
       total bytes transmitted        14925
            total headroom inc            0
           total encap on xmit            0
Device: pbond0
INGRESS priority mappings: 0:0  1:0  2:0  3:0  4:0  5:0  6:0 7:0
EGRESSS priority Mappings:

Similary  the other two subnets also.....


 Really appreceated if anybody helps me out. 

Thanks in advance

 


 


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>