WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] bond/trunk in xen

To: Xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] bond/trunk in xen
From: Srija G <srijavg@xxxxxxxxx>
Date: Fri, 16 Jul 2010 15:57:52 -0400
Cc:
Delivery-date: Fri, 16 Jul 2010 13:00:28 -0700
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:received:date:message-id :subject:from:to:content-type; bh=Nqll9CxV0fz67cA02FFy78j6nLYminT0r7rzCTta4gI=; b=C8h1Cb4vNh+FrmmmSpgUvBF+xc66ajnRppd/f/n4g9s2F8rZCOF1UFIFZ7viT+df0U 2YzOrNS1h4/ow5ocHGOa2skxbLj/QuN9YTtZITii8R1LATMaTNryHsIMgEkJ2amG/zwP Tun88V2DiBH6NMeTHzifjxNweKDfc7F2wZzFU=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; b=Q5/34NnU8aACk3jVtcn1mmYR89ycGNCh9VFPX/OmPO1SOEWskwf8DhM+pkk0cZBsWO 8ixrl64iTZVWdgepZPC26FD8jADz9F6o1HutiUnNzdSB2dVqsp8bcs8ne50fFGn2WkG+ Bw8iFKHtI4D6O4F9S5uBok8I0ba14NWJDcObQ=
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx

Hi ,

  I am trying to configure  bond/trunk  on RHEL 5.4 86_64 OS.
 The bond/trunk works  when I am using mode=1, ie fault-tolerance (active-backup)
 But when I am trying to configure with mode=4, ie 802.3ad Dynamic link aggregation,
  it is not working. 

  Here is the configuration I did:

  -  Considering one  port for bonding ,  now only eth1 as it is a test server has only one port 

  -  the 3 subnets are being considered 12- 14

  -  Included bonding drivers.  and the /etc/modprobe.conf mentioned the parameters as

     alias bond0 bonding
     options bond0 mode=4 miimon=100 lacp_rate=1

  -  In /etc/sysconfig/network-scripts area created few config files as follows;

      ifcfg-bond0  :  DEVICE=bond0
                      BOOTPROTO=none
                      >                      Type=Ethernet
        

      ifcfg-eth1   :  DEVICE=eth1   
                      USERCTL=no
                      >                      MASTER=bond0
                      BOOTPROTO=none
                      HWADDR=xx:xx:xx:xx:xx:xx 
                      SLAVE=yes

    
      ifcfg-bond0.12 :  DEVICE=bond0.12
                        >                        TYPE=Ethernet
                        BOOTPROTO=static
                        IPADDR=xxx.xx.xx.xx
                        NETMASK=255.255.255.0
                        VLAN=yes

      Similarly created ifcfg-bond0.13 and ifcfg-bond.14 like ifcfg-bond0.12

   -  Here is the switch side configuration:

      interface Port-channel60
      description <server> trunk/channel
      switchport trunk allowed vlan 1,12-14,460
      switchport mode trunk
      spanning-tree portfast trunk
      end

      xxx-es-bcs1#sh run int g1/0/4        
      Building configuration...

      Current configuration : 192 bytes
       !
      interface GigabitEthernet1/0/4
      description <server> trunk
      switchport trunk allowed vlan 1,12-14,460
      switchport mode trunk
      channel-group 60 mode active
      spanning-tree portfast trunk
      end

   -  Kept  tag 460 for future use ..

   -  I am getting the file  in /proc/net/bonding/pbond0  not bond0,  here is the display

      Ethernet Channel Bonding Driver: v3.4.0 (October 7, 2008)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2 (0)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0

802.3ad info
LACP rate: fast
Active Aggregator Info:
        Aggregator ID: 1
        Number of ports: 1
        Actor Key: 17
        Partner Key: 1
        Partner Mac Address: 00:00:00:00:00:00

Slave Interface: eth1
MII Status: up
Link Failure Count: 0
Permanent HW addr: xx:xx:xx:xx:xx:xx
Aggregator ID: 1

    -  here is the display  of /proc/net/vlan/bond0.12


pbond0.12  VID: 12       REORDER_HDR: 1  dev->priv_flags: 81
         total frames received            0
          total bytes received            0
      Broadcast/Multicast Rcvd            0

      total frames transmitted           68
       total bytes transmitted        14925
            total headroom inc            0
           total encap on xmit            0
Device: pbond0
INGRESS priority mappings: 0:0  1:0  2:0  3:0  4:0  5:0  6:0 7:0
EGRESSS priority Mappings:

Similary  the other two subnets also.....


 Really appreceated if anybody helps me out. 

Thanks in advance

 


 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>