Re: [Xen-users] Problem with Broadcom Corporation NetXtreme IIBCM5708bnx2

[Alexander Hoßdorf <xen-users@xxxxxxxxxxx>]

rem@xxxxxxx schrieb:
> *From:* Nick Couchman [mailto:Nick.Couchman@xxxxxxxxx]
> *Sent:* Viernes, 22 de Agosto de 2008 10:50 a.m.
> *To:* Alexander Hoßdorf; xen-users@xxxxxxxxxxxxxxxxxxx; rem@xxxxxxx
> *Subject:* Re: [Xen-users] Problem with Broadcom Corporation NetXtreme 
> IIBCM5708bnx2
> I have the PE1950s with the on-board Broadcom chipset and an add-in 
> Intel Pro 1000 card. I'm running SLES10 SP2 (Xen 3.2.0) and I don't 
> see this behavior at all.
> -Nick
>
> >>> On Fri, Aug 22, 2008 at 9:21 AM, Alexander Hoßdorf 
> <xen-users@xxxxxxxxxxx> wrote:
> Hi,
>
> I ran into trouble with this NICs a few times, too.
> Be sure you have a new driver version.
> I don't know which version Xen 3.0.3 RPM delivers. Couldy you tell me?
>
> And perhaps you should give James Harpers Paradrivers a chance.
>
> Cheers,
> Alex
>
>
>
> rem@xxxxxxx schrieb:
> >
> > Hi,
> >
> > I have a Dell PowerEdge 1950 with two NICs Broadcom NetXtreme II
> > BCM5708 1000Base-T. I installed CentOS 5.1 and Xen 3.0.3 (RPM). One of
> > my virtual machines has Windows 2003 Server. In this virtual machine
> > my NICs appears like “Realtek RTL8139 Family PCI Fast Ethernet NIC”.
> > The problem is that when I ping to other machines sometimes the reply
> > time value is very high:
> >
> > C:> ping 10.1.1.1
> >
> > Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
> >
> > Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
> >
> > Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
> >
> > Reply from 10.1.1.1: bytes=32 time=-29815ms TTL=127
> >
> > Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
> >
> > Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
> >
> > Reply from 10.1.1.1: bytes=32 time=-298341ms TTL=127
> >
> > Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
> >
> > Reply from 10.1.1.1: bytes=32 time=29382ms TTL=127
> >
> > Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
> >
> > It important to indicate that the “real” time is good ( approximately
> > between 1 and 2 seconds ). The problem is some applications used this
> > value to monitor some servers and send alarms when time value is high.
> > How you can see some time the reply value is negative.
> >
> > The problem is only with virtual Windows machine.
> >
> > What can I do? Some idea?
> >
> > Thanks a lot for your help
> >
> > Roberto
> >
> >
>
>
> ------------------------------------------------------------------------
>
> Hi
>
> I have Only two on-board Broadcom not add-ins.
>
> How can I know which version Xen delivers?
>
> Thanks
>
> Roberto
Hi,

this prints your module version:
"/sbin/modinfo bnx2" or absolute path "/sbin/modinfo 
/lib/modules/2.6.x-x/kernel/drivers/net/bnx2.ko"
Cheers,
Alex


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users