[Xen-devel] [PATCH v3 18/28] xen/arm32: head: Move assembly switch to the runtime PT in secondary CPUs path

[Julien Grall <julien.grall@xxxxxxx>]

The assembly switch to the runtime PT is only necessary for the
secondary CPUs. So move the code in the secondary CPUs path.

While this is definitely not compliant with the Arm Arm as we are
switching between two differents set of page-tables without turning off
the MMU. Turning off the MMU is impossible here as the ID map may clash
with other mappings in the runtime page-tables. This will require more
rework to avoid the problem. So for now add a TODO in the code.

Finally, the code is currently assume that r5 will be properly set to 0
before hand. This is done by create_page_tables() which is called quite
early in the boot process. There are a risk this may be oversight in the
future and therefore breaking secondary CPUs boot. Instead, set r5 to 0
just before using it.

Signed-off-by: Julien Grall <julien.grall@xxxxxxx>

---
    Changes in v3:
        - There is no need to zero r5

    Changes in v2:
        - Patch added
---
 xen/arch/arm/arm32/head.S | 41 +++++++++++++++++++----------------------
 1 file changed, 19 insertions(+), 22 deletions(-)

diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index f8603051e4..0c95d1c432 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -202,6 +202,25 @@ GLOBAL(init_secondary)
         mov   pc, r0
 secondary_switched:
         bl    setup_fixmap
+
+        /*
+         * Non-boot CPUs need to move on to the proper pagetables, which were
+         * setup in init_secondary_pagetables.
+         *
+         * XXX: This is not compliant with the Arm Arm.
+         */
+        ldr   r4, =init_ttbr         /* VA of HTTBR value stashed by CPU 0 */
+        ldrd  r4, r5, [r4]           /* Actual value */
+        dsb
+        mcrr  CP64(r4, r5, HTTBR)
+        dsb
+        isb
+        mcr   CP32(r0, TLBIALLH)     /* Flush hypervisor TLB */
+        mcr   CP32(r0, ICIALLU)      /* Flush I-cache */
+        mcr   CP32(r0, BPIALL)       /* Flush branch predictor */
+        dsb                          /* Ensure completion of TLB+BP flush */
+        isb
+
         b     launch
 ENDPROC(init_secondary)
 
@@ -505,28 +524,6 @@ ENDPROC(setup_fixmap)
 launch:
         PRINT("- Ready -\r\n")
 
-        /* The boot CPU should go straight into C now */
-        teq   r12, #0
-        beq   1f
-
-        /*
-         * Non-boot CPUs need to move on to the proper pagetables, which were
-         * setup in init_secondary_pagetables.
-         */
-
-        ldr   r4, =init_ttbr         /* VA of HTTBR value stashed by CPU 0 */
-        ldrd  r4, r5, [r4]           /* Actual value */
-        dsb
-        mcrr  CP64(r4, r5, HTTBR)
-        dsb
-        isb
-        mcr   CP32(r0, TLBIALLH)     /* Flush hypervisor TLB */
-        mcr   CP32(r0, ICIALLU)      /* Flush I-cache */
-        mcr   CP32(r0, BPIALL)       /* Flush branch predictor */
-        dsb                          /* Ensure completion of TLB+BP flush */
-        isb
-
-1:
         ldr   r0, =init_data
         add   r0, #INITINFO_stack    /* Find the boot-time stack */
         ldr   sp, [r0]
-- 
2.11.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel