[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v3 06/28] xen/arm64: head: Introduce a macro to get a PC-relative address of a symbol



Arm64 provides instructions to load a PC-relative address, but with some
limitations:
   - adr is enable to cope with +/-1MB
   - adrp is enale to cope with +/-4GB but relative to a 4KB page
     address

Because of that, the code requires to use 2 instructions to load any Xen
symbol. To make the code more obvious, introducing a new macro adr_l is
introduced.

The new macro is used to replace a couple of open-coded use in
efi_xen_start.

The macro is copied from Linux 5.2-rc4.

Signed-off-by: Julien Grall <julien.grall@xxxxxxx>
Acked-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>

---
    Changes in v3:
        - Fix typo in my e-mail address
        - Add Stefano's acked-by

    Changes in v2:
        - Patch added
---
 xen/arch/arm/arm64/head.S | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
index 9b703e79ce..cd03101196 100644
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -117,6 +117,18 @@
 
 #endif /* !CONFIG_EARLY_PRINTK */
 
+/*
+ * Pseudo-op for PC relative adr <reg>, <symbol> where <symbol> is
+ * within the range +/- 4GB of the PC.
+ *
+ * @dst: destination register (64 bit wide)
+ * @sym: name of the symbol
+ */
+.macro  adr_l, dst, sym
+        adrp \dst, \sym
+        add  \dst, \dst, :lo12:\sym
+.endm
+
 /* Load the physical address of a symbol into xb */
 .macro load_paddr xb, sym
         ldr \xb, =\sym
@@ -895,11 +907,9 @@ ENTRY(efi_xen_start)
          * Flush dcache covering current runtime addresses
          * of xen text/data. Then flush all of icache.
          */
-        adrp  x1, _start
-        add   x1, x1, #:lo12:_start
+        adr_l x1, _start
         mov   x0, x1
-        adrp  x2, _end
-        add   x2, x2, #:lo12:_end
+        adr_l x2, _end
         sub   x1, x2, x1
 
         bl    __flush_dcache_area
-- 
2.11.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.