[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v6 24/24] docs: add L2 CAT description in docs.



This patch adds L2 CAT description in related documents.

Signed-off-by: He Chen <he.chen@xxxxxxxxxxxxxxx>
Signed-off-by: Yi Sun <yi.y.sun@xxxxxxxxxxxxxxx>
Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx>
---
 docs/man/xl.pod.1.in      | 25 ++++++++++++++++++++++---
 docs/misc/xl-psr.markdown | 10 ++++++++--
 2 files changed, 30 insertions(+), 5 deletions(-)

diff --git a/docs/man/xl.pod.1.in b/docs/man/xl.pod.1.in
index 7caed08..5e7676e 100644
--- a/docs/man/xl.pod.1.in
+++ b/docs/man/xl.pod.1.in
@@ -1711,6 +1711,9 @@ occupancy monitoring share the same set of underlying 
monitoring service. Once
 a domain is attached to the monitoring service, monitoring data can be shown
 for any of these monitoring types.
 
+There is no cache monitoring and memory bandwidth monitoring on L2 cache so
+far.
+
 =over 4
 
 =item B<psr-cmt-attach> [I<domain-id>]
@@ -1735,7 +1738,7 @@ monitor types are:
 
 Intel Broadwell and later server platforms offer capabilities to configure and
 make use of the Cache Allocation Technology (CAT) mechanisms, which enable more
-cache resources (i.e. L3 cache) to be made available for high priority
+cache resources (i.e. L3/L2 cache) to be made available for high priority
 applications. In the Xen implementation, CAT is used to control cache 
allocation
 on VM basis. To enforce cache on a specific domain, just set capacity bitmasks
 (CBM) for the domain.
@@ -1745,7 +1748,7 @@ Intel Broadwell and later server platforms also offer 
Code/Data Prioritization
 applications. CDP is used on a per VM basis in the Xen implementation. To
 specify code or data CBM for the domain, CDP feature must be enabled and CBM
 type options need to be specified when setting CBM, and the type options (code
-and data) are mutually exclusive.
+and data) are mutually exclusive. There is no CDP support on L2 so far.
 
 =over 4
 
@@ -1762,6 +1765,11 @@ B<OPTIONS>
 
 Specify the socket to process, otherwise all sockets are processed.
 
+=item B<-l LEVEL>, B<--level=LEVEL>
+
+Specify the cache level to process, otherwise the last level cache (L3) is
+processed.
+
 =item B<-c>, B<--code>
 
 Set code CBM when CDP is enabled.
@@ -1772,10 +1780,21 @@ Set data CBM when CDP is enabled.
 
 =back
 
-=item B<psr-cat-show> [I<domain-id>]
+=item B<psr-cat-show> [I<OPTIONS>] [I<domain-id>]
 
 Show CAT settings for a certain domain or all domains.
 
+B<OPTIONS>
+
+=over 4
+
+=item B<-l LEVEL>, B<--level=LEVEL>
+
+Specify the cache level to process, otherwise the last level cache (L3) is
+processed.
+
+=back
+
 =back
 
 =head1 IGNORED FOR COMPATIBILITY WITH XM
diff --git a/docs/misc/xl-psr.markdown b/docs/misc/xl-psr.markdown
index c3c1e8e..bd2b6bd 100644
--- a/docs/misc/xl-psr.markdown
+++ b/docs/misc/xl-psr.markdown
@@ -70,7 +70,7 @@ total-mem-bandwidth instead of cache-occupancy). E.g. after a 
`xl psr-cmt-attach
 
 Cache Allocation Technology (CAT) is a new feature available on Intel
 Broadwell and later server platforms that allows an OS or Hypervisor/VMM to
-partition cache allocation (i.e. L3 cache) based on application priority or
+partition cache allocation (i.e. L3/L2 cache) based on application priority or
 Class of Service (COS). Each COS is configured using capacity bitmasks (CBM)
 which represent cache capacity and indicate the degree of overlap and
 isolation between classes. System cache resource is divided into numbers of
@@ -119,13 +119,19 @@ A cbm is valid only when:
 In a multi-socket system, the same cbm will be set on each socket by default.
 Per socket cbm can be specified with the `--socket SOCKET` option.
 
+In different systems, the different cache level is supported, e.g. L3 cache or
+L2 cache. Per cache level cbm can be specified with the `--level LEVEL` option.
+
 Setting the CBM may not be successful if insufficient COS is available. In
 such case unused COS(es) may be freed by setting CBM of all related domains to
 its default value(all-ones).
 
 Per domain CBM settings can be shown by:
 
-`xl psr-cat-show`
+`xl psr-cat-show [OPTIONS] <domid>`
+
+In different systems, the different cache level is supported, e.g. L3 cache or
+L2 cache. Per cache level cbm can be specified with the `--level LEVEL` option.
 
 ## Code and Data Prioritization (CDP)
 
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.