[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] vTPM setup problem on the emulator



Hi Matthew, 

Thank you for your reply.



2013/1/10 Matthew Fioravante <matthew.fioravante@xxxxxxxxxx>
On 01/09/2013 03:58 AM, gavin wrote:
Hi,

I tried to install the vTPM in Xen-4.1.0 + Dom0 kernel 2.6.18.8 + DomU kernel 2.6.18.8. The device is TPM emulator.
However, I  encountered several problems.

1. In DomU, I run "modprobe tpm_xenu" successfully. But it doesn't creates the /dev/tpm0 device as our had expected. So, the trousers cannot be started. An old thread in Xen mail-list can do this,(http://old-list-archives.xen.org/xense-devel/2006-12/msg00002.html) but it helps little to me.
Is there any problem with my vTPM front driver? The tpm related modules and other info in DomU is list here.
[root@gavin-pv ~]# lsmod | grep tpm
tpm_xenu               15752  0 [permanent]
tpm                        17952  1 tpm_xenu
tpm_bios               10112  1 tpm
[root@gavin-pv ~]# tcsd -f
TCSD TDDL ERROR: Could not find a device to open!
Any relevant output in dmesg? Also does your domu config file have a vtpm device specified?

When I run "insmod tpm_xenu.ko" at the first time in DomU, there is no special message in dmesg except for this "xen_tpm_fr: Initialising the vTPM driver."
Then, I reload the tpm_xenu module after removing it using "rmmod tpm_xenu.ko -f". I get the following message in dmesg.
...
xen_tpm_fr: Initialising the vTPM driver.
kobject_add failed for vtpm with -EEXIST, don't try to register things with the same
name in the same directory.
 [<c01ea4ea>] kobject_add+0x11a/0x1a0
 [<c01ea691>] kobject_register+0x21/0x50
 [<c02400fd>] bus_add_driver+0x7d/0x140
 [<c02856f9>] xenbus_register_driver_common+0x39/0x60
 [<c0285740>] xenbus_register_frontend+0x20/0x40
 [<e1227050>] tpmif_init+0x50/0x62 [tpm_xenu]
 [<c0143b08>] sys_init_module+0x148/0x1b40
 [<c01187fc>] do_page_fault+0x10c/0xc6f
 [<c010845e>] do_syscall_trace+0x1ee/0x205
 [<c01059bf>] syscall_call+0x7/0xb

In the DomUconfig file, I use vtpm = ['backend=0'].
But there is no vtpm device in Dom0 and DomU. See the following info.

Dom0:
[root@localhost fc8_new]# ls /sys/devices/xen-backend/
console-3-0  power  uevent  vbd-3-2049  vfb-3-0  vif-3-0  vkbd-3-0

DomU:
[root@gavin-pv tpm]# ls /sys/devices/xen
power  uevent  vbd-2049  vfb-0  vif-0  vkbd-0

 


          2. In Dom0, I run "modprobe tpmd_dev" and "modprobe tpmbk"
          also successfully and I can get the devices /dev/tpm,
          /dev/tpm0, and /dev/vtpm. However, I cannot start the tpm
          emulator (# ./tpmd -f clear pvm 1) and vtpm manager (#
          vtpm_managerd). The related info and output error from Dom0 is
          also list here. 
So you want to use the TPM emulator on dom0 instead of a physical TPM?
Yes, I try to use TPM emulator right now.
In fact, there is a physical TPM chip in my laptop. But I'm not sure how to make it work in fedora8. So, when the vTPM works well on emulator, I will try to abandon the emulator and use the physical TPM.

 

I see you listed /dev/tpm and /dev/tpm0. I believe the old manager is hard coded to use the second one. Is tpmd creating both?
Yes. When modprobe the tpmd_dev module, these two devices are created.


Thanks again.

 


[root@localhost tpmd]# lsmod | grep tpm
tpmd_dev               10416  0 
tpmbk                     19516  0 [permanent]
[root@localhost tpmd]# ./tpmd -f clear pvm 1
VTPMD[0]: tpmd.c:766: Info: starting TPM Emulator daemon
VTPMD[0]: tpmd.c:369: Info: parsing options
VTPMD[1]: tpmd.c:478: Info: openening random device /dev/urandom
VTPMD[1]: tpmd.c:621: Info: staring main loop
Loading NVM.
Error in read_from_file:301
VTPMD[1]: ../tpm/tpm_data.c:83: Info: initializing TPM data to default values
VTPMD[1]: ../tpm/tpm_startup.c:30: Info: TPM_Init()
VTPMD[1]: ../tpm/tpm_testing.c:242: Info: TPM_SelfTestFull()
VTPMD[1]: ../tpm/tpm_testing.c:260: Info: Self-Test succeeded
VTPMD[1]: ../tpm/tpm_startup.c:44: Info: TPM_Startup(1)
VTPMD[1]: tpmd.c:661: Error: Failed to open devices to listen to guest.



[root@localhost vtpm]# vtpm_managerd
INFO[VTPM]: Starting VTPM.
INFO[TCS]: Constructing new TCS:
ERROR[TXDATA]: TPM open failedERROR in VTPM_Init_Manager at vtpm_manager.c:205 code:
TPM_IOERROR.
ERROR[VTPM]: Closing vtpmd due to error during startup.


Thanks in advance for your any reply.

--
Best Regards,
Gavin




_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.