[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Re: Konrad devel/next-3.0, pci-passthrough not working: Error: pci: PCI Backend and pci-stub don't own device
On Tue, Jun 21, 2011 at 03:41:26PM +0200, Sander Eikelenboom wrote: > Hi Konrad, > > I'm trying to use a kernel compiled from your devel/next-3.0 branch. Ok, good. > But trying to start a PV guest with pci-passthrough makes xen complain: > > xm create /etc/xen/domU/production/security.cfg > Using config file "/etc/xen/domU/production/security.cfg". > Error: pci: PCI Backend and pci-stub don't own device 0000:04:00.0 Most suprising. I wonder if there is some SysFS magic that Xend does not understand anymore. Can you try this with 'xl' please? > > Although the device is in fact owned by xen-pciback: <nods> > > 04:00.0 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 Host > Controller > Subsystem: Device a000:4000 > Kernel driver in use: xen-pciback > 04:00.1 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 Host > Controller > Subsystem: Device a000:4000 > Kernel driver in use: xen-pciback > 04:00.2 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 Host > Controller > Subsystem: Device a000:4000 > Kernel driver in use: xen-pciback > 04:00.3 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 Host > Controller > Subsystem: Device a000:4000 > Kernel driver in use: xen-pciback > 04:00.4 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 Host > Controller > Subsystem: Device a000:4000 > Kernel driver in use: xen-pciback > 04:00.5 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 Host > Controller > Subsystem: Device a000:4000 > Kernel driver in use: xen-pciback > 04:00.6 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 Host > Controller > Subsystem: Device a000:4000 > Kernel driver in use: xen-pciback > 04:00.7 USB Controller: NetMos Technology MCS9990 PCIe to 4âPort USB 2.0 Host > Controller > Subsystem: Device a000:4000 > Kernel driver in use: xen-pciback > > > With the kernels from Jeremy's tree (2.6.32.35) it works fine, using the > exact same grub config lines with the 3.0 it doesn't. > All guests with pci-passthrough fail to start, all others start fine. > As hypervisor i'm running 4.1.1. > > info attachted: > - xm info > - xm dmesg > - dmesg > - lspci > > -- > Sander > [ 0.000000] Linux version 3.0.0-rc3-xen-konrad-devel-next-20110621+ > (root@serveerstertje) (gcc version 4.4.5 (Debian 4.4.5-8) ) #2 SMP Tue Jun 21 > 14:03:13 CEST 2011 > [ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro > nomodeset vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 > acpi_enforce_resources=lax > xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) > pci=resource_alignment=07:01.0;07:01.1;07:01.2 > [ 0.000000] released 0 pages of unused memory > [ 0.000000] 1-1 mapping on 9f->100 > [ 0.000000] 1-1 mapping on aff90->100000 > [ 0.000000] Set 327889 page(s) to 1-1 mapping. > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) > [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable) > [ 0.000000] Xen: 0000000030000000 - 00000000aff90000 (unusable) > [ 0.000000] Xen: 00000000aff90000 - 00000000aff9e000 (ACPI data) > [ 0.000000] Xen: 00000000aff9e000 - 00000000affe0000 (ACPI NVS) > [ 0.000000] Xen: 00000000affe0000 - 00000000b0000000 (reserved) > [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) > [ 0.000000] Xen: 00000000fec20000 - 00000000fec21000 (reserved) > [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) > [ 0.000000] Xen: 0000000100000000 - 00000002b0000000 (usable) > [ 0.000000] bootconsole [xenboot0] enabled > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI present. > [ 0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 > 09/13/2010 > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 > (usable) ==> (reserved) > [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) > [ 0.000000] No AGP bridge found > [ 0.000000] last_pfn = 0x2b0000 max_arch_pfn = 0x400000000 > [ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000 > [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 > [ 0.000000] initial memory mapped : 0 - 027d7000 > [ 0.000000] Base memory trampoline at [ffff88000009d000] 9d000 size 8192 > [ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000 > [ 0.000000] 0000000000 - 0030000000 page 4k > [ 0.000000] kernel direct mapping tables up to 30000000 @ 2fe7e000-30000000 > [ 0.000000] xen: setting RW the range 2ffe4000 - 30000000 > [ 0.000000] init_memory_mapping: 0000000100000000-00000002b0000000 > [ 0.000000] 0100000000 - 02b0000000 page 4k > [ 0.000000] kernel direct mapping tables up to 2b0000000 @ > 2e8f2000-2fe7e000 > [ 0.000000] xen: setting RW the range 2f679000 - 2fe7e000 > [ 0.000000] RAMDISK: 01e0d000 - 027d7000 > [ 0.000000] ACPI: RSDP 00000000000fb100 00014 (v00 ACPIAM) > [ 0.000000] ACPI: RSDT 00000000aff90000 00048 (v01 MSI OEMSLIC > 20100913 MSFT 00000097) > [ 0.000000] ACPI: FACP 00000000aff90200 00084 (v01 7640MS A7640100 > 20100913 MSFT 00000097) > [ 0.000000] ACPI: DSDT 00000000aff905e0 09427 (v01 A7640 A7640100 > 00000100 INTL 20051117) > [ 0.000000] ACPI: FACS 00000000aff9e000 00040 > [ 0.000000] ACPI: APIC 00000000aff90390 00088 (v01 7640MS A7640100 > 20100913 MSFT 00000097) > [ 0.000000] ACPI: MCFG 00000000aff90420 0003C (v01 7640MS OEMMCFG > 20100913 MSFT 00000097) > [ 0.000000] ACPI: SLIC 00000000aff90460 00176 (v01 MSI OEMSLIC > 20100913 MSFT 00000097) > [ 0.000000] ACPI: OEMB 00000000aff9e040 00072 (v01 7640MS A7640100 > 20100913 MSFT 00000097) > [ 0.000000] ACPI: SRAT 00000000aff9a5e0 00108 (v03 AMD FAM_F_10 > 00000002 AMD 00000001) > [ 0.000000] ACPI: HPET 00000000aff9a6f0 00038 (v01 7640MS OEMHPET > 20100913 MSFT 00000097) > [ 0.000000] ACPI: IVRS 00000000aff9a730 00100 (v01 AMD RD890S > 00202031 AMD 00000000) > [ 0.000000] ACPI: SSDT 00000000aff9a830 00DA4 (v01 A M I POWERNOW > 00000001 AMD 00000001) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x002b0000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x00030000 > [ 0.000000] 0: 0x00100000 -> 0x002b0000 > [ 0.000000] On node 0 totalpages: 1965967 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 2 pages reserved > [ 0.000000] DMA zone: 3925 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 14280 pages used for memmap > [ 0.000000] DMA32 zone: 178232 pages, LIFO batch:31 > [ 0.000000] Normal zone: 24192 pages used for memmap > [ 0.000000] Normal zone: 1745280 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 6, version 255, address 0xfec00000, GSI > 0-255 > [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) > [ 0.000000] IOAPIC[1]: apic_id 7, version 255, address 0xfec20000, GSI > 24-279 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 > [ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 296 > [ 0.000000] Allocating PCI resources starting at b0000000 (gap: > b0000000:4ec00000) > [ 0.000000] Booting paravirtualized kernel on Xen > [ 0.000000] Xen version: 4.1.1 (preserve-AD) > [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 > nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88002fdc6000 s76416 r8192 > d21888 u106496 > [ 0.000000] pcpu-alloc: s76416 r8192 d21888 u106496 alloc=26*4096 > [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 1927437 > [ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro > nomodeset vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 > acpi_enforce_resources=lax > xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) > pci=resource_alignment=07:01.0;07:01.1;07:01.2 > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 > bytes) > [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 > bytes) > [ 0.000000] Placing 64MB software IO TLB between ffff8800237f2000 - > ffff8800277f2000 > [ 0.000000] software IO TLB at phys 0x237f2000 - 0x277f2000 > [ 0.000000] Memory: 559148k/11272192k available (7669k kernel code, > 3408324k absent, 7304720k reserved, 3713k data, 812k init) > [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, > CPUs=6, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU debugfs-based tracing is enabled. > [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 > [ 0.000000] NR_IRQS:4352 nr_irqs:1536 16 > [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1 > [ 0.000000] xen: registering gsi 9 triggering 0 polarity 1 > [ 0.000000] xen: --> pirq=9 -> irq=9 > [ 0.000000] xen: acpi sci 9 > [ 0.000000] xen: --> pirq=1 -> irq=1 > [ 0.000000] xen: --> pirq=2 -> irq=2 > [ 0.000000] xen: --> pirq=3 -> irq=3 > [ 0.000000] xen: --> pirq=4 -> irq=4 > [ 0.000000] xen: --> pirq=5 -> irq=5 > [ 0.000000] xen: --> pirq=6 -> irq=6 > [ 0.000000] xen: --> pirq=7 -> irq=7 > [ 0.000000] xen: --> pirq=8 -> irq=8 > [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 > [ 0.000000] xen: --> pirq=9 -> irq=9 > [ 0.000000] xen: --> pirq=10 -> irq=10 > [ 0.000000] xen: --> pirq=11 -> irq=11 > [ 0.000000] xen: --> pirq=12 -> irq=12 > [ 0.000000] xen: --> pirq=13 -> irq=13 > [ 0.000000] xen: --> pirq=14 -> irq=14 > [ 0.000000] xen: --> pirq=15 -> irq=15 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled, bootconsole disabled > [ 0.000000] Xen: using vcpuop timer interface > [ 0.000000] installing Xen timer for CPU 0 > [ 0.000000] Detected 3200.184 MHz processor. > [ 0.004000] Calibrating delay loop (skipped), value calculated using timer > frequency.. 6400.36 BogoMIPS (lpj=12800736) > [ 0.004000] pid_max: default: 32768 minimum: 301 > [ 0.004000] Security Framework initialized > [ 0.004000] SELinux: Initializing. > [ 0.004000] SELinux: Starting in permissive mode > [ 0.004000] Mount-cache hash table entries: 256 > [ 0.004000] tseg: 0000000000 > [ 0.004000] CPU: Physical Processor ID: 0 > [ 0.004000] CPU: Processor Core ID: 0 > [ 0.004000] ACPI: Core revision 20110413 > [ 0.012014] ftrace: allocating 26057 entries in 103 pages > [ 0.016072] cpu 0 spinlock event irq 297 > [ 0.016105] Performance Events: Broken PMU hardware detected, using > software events only. > [ 0.016304] MCE: In-kernel MCE decoding enabled. > [ 0.016367] installing Xen timer for CPU 1 > [ 0.016384] cpu 1 spinlock event irq 303 > [ 0.016574] installing Xen timer for CPU 2 > [ 0.016584] cpu 2 spinlock event irq 309 > [ 0.016762] installing Xen timer for CPU 3 > [ 0.016771] cpu 3 spinlock event irq 315 > [ 0.016937] installing Xen timer for CPU 4 > [ 0.016946] cpu 4 spinlock event irq 321 > [ 0.017140] installing Xen timer for CPU 5 > [ 0.017151] cpu 5 spinlock event irq 327 > [ 0.017316] Brought up 6 CPUs > [ 0.017386] Grant table initialized > [ 0.017386] NET: Registered protocol family 16 > [ 0.017386] node 0 link 0: io port [1000, ffffff] > [ 0.017386] TOM: 00000000b0000000 aka 2816M > [ 0.017386] Fam 10h mmconf [e0000000, efffffff] > [ 0.017386] node 0 link 0: mmio [e0000000, efffffff] ==> none > [ 0.017386] node 0 link 0: mmio [f0000000, ffffffff] > [ 0.017386] node 0 link 0: mmio [a0000, bffff] > [ 0.017386] node 0 link 0: mmio [b0000000, dfffffff] > [ 0.017386] TOM2: 0000000250000000 aka 9472M > [ 0.017386] bus: [00, 07] on node 0 link 0 > [ 0.017386] bus: 00 index 0 [io 0x0000-0xffff] > [ 0.017386] bus: 00 index 1 [mem 0xf0000000-0xffffffff] > [ 0.017386] bus: 00 index 2 [mem 0x000a0000-0x000bffff] > [ 0.017386] bus: 00 index 3 [mem 0xb0000000-0xdfffffff] > [ 0.017386] bus: 00 index 4 [mem 0x250000000-0xfcffffffff] > [ 0.017386] Extended Config Space enabled on 1 nodes > [ 0.017386] ACPI: bus type pci registered > [ 0.017386] sync cpu 0 get result 1 max_id 5 > [ 0.017386] sync cpu 1 get result 1 max_id 5 > [ 0.017386] sync cpu 2 get result 1 max_id 5 > [ 0.017386] sync cpu 3 get result 1 max_id 5 > [ 0.017386] sync cpu 4 get result 1 max_id 5 > [ 0.017386] sync cpu 5 get result 1 max_id 5 > [ 0.020032] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem > 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.020045] PCI: not using MMCONFIG > [ 0.020048] PCI: Using configuration type 1 for base access > [ 0.020050] PCI: Using configuration type 1 for extended access > [ 0.036035] bio: create slab <bio-0> at 0 > [ 0.038934] ACPI: EC: Look up EC in DSDT > [ 0.042573] ACPI: Executed 3 blocks of module-level executable AML code > [ 0.060694] ACPI: Interpreter enabled > [ 0.060698] ACPI: (supports S0 S5) > [ 0.060708] ACPI: Using IOAPIC for interrupt routing > [ 0.060752] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem > 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.062357] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI > motherboard resources > [ 0.228348] ACPI: No dock devices found. > [ 0.228348] PCI: Using host bridge windows from ACPI; if necessary, use > "pci=nocrs" and report a bug > [ 0.228637] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.228675] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] > [ 0.228675] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] > [ 0.228675] pci_root PNP0A03:00: host bridge window [mem > 0x000a0000-0x000bffff] > [ 0.228675] pci_root PNP0A03:00: host bridge window [mem > 0x000d0000-0x000dffff] > [ 0.228675] pci_root PNP0A03:00: host bridge window [mem > 0xb0000000-0xdfffffff] > [ 0.228675] pci_root PNP0A03:00: host bridge window [mem > 0xf0000000-0xfebfffff] > [ 0.228675] pci_bus 0000:00: scanning bus > [ 0.228675] pci 0000:00:00.0: [1002:5a11] type 0 class 0x000600 > [ 0.228675] pci 0000:00:00.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.228675] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.228675] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.228675] pci 0000:00:00.2: [1002:5a23] type 0 class 0x000806 > [ 0.228675] pci 0000:00:00.2: calling quirk_no_ata_d3+0x0/0x1b > [ 0.228675] pci 0000:00:00.2: calling quirk_mmio_always_on+0x0/0x17 > [ 0.228675] pci 0000:00:00.2: calling quirk_resource_alignment+0x0/0x16e > [ 0.228675] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604 > [ 0.228675] pci 0000:00:02.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.228675] pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.228675] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.228675] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold > [ 0.228675] pci 0000:00:02.0: PME# disabled > [ 0.228675] pci 0000:00:03.0: [1002:5a17] type 1 class 0x000604 > [ 0.228675] pci 0000:00:03.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.228675] pci 0000:00:03.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.228686] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.228709] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold > [ 0.228713] pci 0000:00:03.0: PME# disabled > [ 0.228739] pci 0000:00:05.0: [1002:5a19] type 1 class 0x000604 > [ 0.228741] pci 0000:00:05.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.228751] pci 0000:00:05.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.228787] pci 0000:00:05.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.228810] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold > [ 0.228813] pci 0000:00:05.0: PME# disabled > [ 0.228844] pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604 > [ 0.228847] pci 0000:00:06.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.228850] pci 0000:00:06.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.228886] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.228908] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold > [ 0.228912] pci 0000:00:06.0: PME# disabled > [ 0.228948] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604 > [ 0.228950] pci 0000:00:0a.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.228953] pci 0000:00:0a.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.228989] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.229041] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold > [ 0.229045] pci 0000:00:0a.0: PME# disabled > [ 0.229069] pci 0000:00:0b.0: [1002:5a1f] type 1 class 0x000604 > [ 0.229072] pci 0000:00:0b.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.229074] pci 0000:00:0b.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.229117] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.229140] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold > [ 0.229144] pci 0000:00:0b.0: PME# disabled > [ 0.229170] pci 0000:00:0d.0: [1002:5a1e] type 1 class 0x000604 > [ 0.229172] pci 0000:00:0d.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.229175] pci 0000:00:0d.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.229218] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.229241] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold > [ 0.229244] pci 0000:00:0d.0: PME# disabled > [ 0.229287] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 > [ 0.229301] pci 0000:00:11.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.229303] pci 0000:00:11.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.229318] pci 0000:00:11.0: reg 10: [io 0x7000-0x7007] > [ 0.229330] pci 0000:00:11.0: reg 14: [io 0x6000-0x6003] > [ 0.229342] pci 0000:00:11.0: reg 18: [io 0x5000-0x5007] > [ 0.229361] pci 0000:00:11.0: reg 1c: [io 0x3000-0x3003] > [ 0.229372] pci 0000:00:11.0: reg 20: [io 0x2000-0x200f] > [ 0.229384] pci 0000:00:11.0: reg 24: [mem 0xf98ff000-0xf98ff3ff] > [ 0.229402] pci 0000:00:11.0: calling quirk_amd_ide_mode+0x0/0xc4 > [ 0.229412] pci 0000:00:11.0: set SATA to AHCI mode > [ 0.229415] pci 0000:00:11.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.229478] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 > [ 0.229482] pci 0000:00:12.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.229484] pci 0000:00:12.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.229499] pci 0000:00:12.0: reg 10: [mem 0xf98fb000-0xf98fbfff] > [ 0.229565] pci 0000:00:12.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.232041] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 > [ 0.232059] pci 0000:00:12.2: calling quirk_no_ata_d3+0x0/0x1b > [ 0.232061] pci 0000:00:12.2: calling quirk_mmio_always_on+0x0/0x17 > [ 0.232076] pci 0000:00:12.2: reg 10: [mem 0xf98ff400-0xf98ff4ff] > [ 0.232148] pci 0000:00:12.2: calling quirk_resource_alignment+0x0/0x16e > [ 0.232174] pci 0000:00:12.2: supports D1 D2 > [ 0.232176] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot > [ 0.232180] pci 0000:00:12.2: PME# disabled > [ 0.232205] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 > [ 0.232208] pci 0000:00:13.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.232211] pci 0000:00:13.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.232233] pci 0000:00:13.0: reg 10: [mem 0xf98fc000-0xf98fcfff] > [ 0.232297] pci 0000:00:13.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.232328] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 > [ 0.232339] pci 0000:00:13.2: calling quirk_no_ata_d3+0x0/0x1b > [ 0.232341] pci 0000:00:13.2: calling quirk_mmio_always_on+0x0/0x17 > [ 0.232356] pci 0000:00:13.2: reg 10: [mem 0xf98ff800-0xf98ff8ff] > [ 0.232428] pci 0000:00:13.2: calling quirk_resource_alignment+0x0/0x16e > [ 0.232453] pci 0000:00:13.2: supports D1 D2 > [ 0.232455] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot > [ 0.232460] pci 0000:00:13.2: PME# disabled > [ 0.232491] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 > [ 0.232495] pci 0000:00:14.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.232497] pci 0000:00:14.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.232500] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x60 > [ 0.232584] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x20 > [ 0.232586] pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.232602] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 > [ 0.232606] pci 0000:00:14.1: calling quirk_no_ata_d3+0x0/0x1b > [ 0.232608] pci 0000:00:14.1: calling quirk_mmio_always_on+0x0/0x17 > [ 0.232623] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] > [ 0.232635] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] > [ 0.232647] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] > [ 0.232666] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] > [ 0.232678] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] > [ 0.232705] pci 0000:00:14.1: calling quirk_resource_alignment+0x0/0x16e > [ 0.232722] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 > [ 0.232726] pci 0000:00:14.3: calling quirk_no_ata_d3+0x0/0x1b > [ 0.232728] pci 0000:00:14.3: calling quirk_mmio_always_on+0x0/0x17 > [ 0.232812] pci 0000:00:14.3: calling quirk_resource_alignment+0x0/0x16e > [ 0.232827] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 > [ 0.232866] pci 0000:00:14.4: calling quirk_no_ata_d3+0x0/0x1b > [ 0.232868] pci 0000:00:14.4: calling quirk_mmio_always_on+0x0/0x17 > [ 0.232903] pci 0000:00:14.4: calling quirk_resource_alignment+0x0/0x16e > [ 0.232918] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 > [ 0.232922] pci 0000:00:14.5: calling quirk_no_ata_d3+0x0/0x1b > [ 0.232924] pci 0000:00:14.5: calling quirk_mmio_always_on+0x0/0x17 > [ 0.232939] pci 0000:00:14.5: reg 10: [mem 0xf98fd000-0xf98fdfff] > [ 0.233010] pci 0000:00:14.5: calling quirk_resource_alignment+0x0/0x16e > [ 0.233036] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 > [ 0.233039] pci 0000:00:15.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.233041] pci 0000:00:15.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.233096] pci 0000:00:15.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.233126] pci 0000:00:15.0: supports D1 D2 > [ 0.233160] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 > [ 0.233164] pci 0000:00:16.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.233167] pci 0000:00:16.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.233189] pci 0000:00:16.0: reg 10: [mem 0xf98fe000-0xf98fefff] > [ 0.233254] pci 0000:00:16.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.233285] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 > [ 0.233295] pci 0000:00:16.2: calling quirk_no_ata_d3+0x0/0x1b > [ 0.233298] pci 0000:00:16.2: calling quirk_mmio_always_on+0x0/0x17 > [ 0.233313] pci 0000:00:16.2: reg 10: [mem 0xf98ffc00-0xf98ffcff] > [ 0.233384] pci 0000:00:16.2: calling quirk_resource_alignment+0x0/0x16e > [ 0.233410] pci 0000:00:16.2: supports D1 D2 > [ 0.233412] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot > [ 0.233416] pci 0000:00:16.2: PME# disabled > [ 0.233449] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 > [ 0.233452] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.233479] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.233499] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 > [ 0.233502] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x17 > [ 0.233536] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x16e > [ 0.233546] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 > [ 0.233549] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x17 > [ 0.233576] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x16e > [ 0.233588] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 > [ 0.233591] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x17 > [ 0.233625] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x16e > [ 0.233644] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 > [ 0.233647] pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x17 > [ 0.233674] pci 0000:00:18.4: calling quirk_resource_alignment+0x0/0x16e > [ 0.233692] pci_bus 0000:00: fixups for bus > [ 0.233696] pci 0000:00:02.0: scanning [bus 0b-0b] behind bridge, pass 0 > [ 0.233748] pci_bus 0000:0b: scanning bus > [ 0.233768] pci 0000:0b:00.0: [10de:06e4] type 0 class 0x000300 > [ 0.233771] pci 0000:0b:00.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.233785] pci 0000:0b:00.0: reg 10: [mem 0xfd000000-0xfdffffff] > [ 0.233809] pci 0000:0b:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit > pref] > [ 0.233825] pci 0000:0b:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] > [ 0.233836] pci 0000:0b:00.0: reg 24: [io 0xe800-0xe87f] > [ 0.233848] pci 0000:0b:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref] > [ 0.233853] pci 0000:0b:00.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.240043] pci_bus 0000:0b: fixups for bus > [ 0.240047] pci 0000:00:02.0: PCI bridge to [bus 0b-0b] > [ 0.240055] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] > [ 0.240060] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff] > [ 0.240066] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff > 64bit pref] > [ 0.240068] pci_bus 0000:0b: bus scan returning with max=0b > [ 0.240073] pci 0000:00:03.0: scanning [bus 0a-0a] behind bridge, pass 0 > [ 0.240126] pci_bus 0000:0a: scanning bus > [ 0.240150] pci 0000:0a:00.0: [9710:9990] type 0 class 0x000c03 > [ 0.240156] pci 0000:0a:00.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.240182] pci 0000:0a:00.0: reg 10: [mem 0xf9ff8000-0xf9ff8fff] > [ 0.240275] pci 0000:0a:00.0: calling quirk_netmos+0x0/0x98 > [ 0.240278] pci 0000:0a:00.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.240323] pci 0000:0a:00.0: supports D1 D2 > [ 0.240325] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot > [ 0.240330] pci 0000:0a:00.0: PME# disabled > [ 0.240379] pci 0000:0a:00.1: [9710:9990] type 0 class 0x000c03 > [ 0.240383] pci 0000:0a:00.1: calling quirk_mmio_always_on+0x0/0x17 > [ 0.240402] pci 0000:0a:00.1: reg 10: [mem 0xf9ff9000-0xf9ff9fff] > [ 0.240495] pci 0000:0a:00.1: calling quirk_netmos+0x0/0x98 > [ 0.240497] pci 0000:0a:00.1: calling quirk_resource_alignment+0x0/0x16e > [ 0.240546] pci 0000:0a:00.1: supports D1 D2 > [ 0.240548] pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot > [ 0.240554] pci 0000:0a:00.1: PME# disabled > [ 0.240594] pci 0000:0a:00.2: [9710:9990] type 0 class 0x000c03 > [ 0.240597] pci 0000:0a:00.2: calling quirk_mmio_always_on+0x0/0x17 > [ 0.240623] pci 0000:0a:00.2: reg 10: [mem 0xf9ffa000-0xf9ffafff] > [ 0.240716] pci 0000:0a:00.2: calling quirk_netmos+0x0/0x98 > [ 0.240718] pci 0000:0a:00.2: calling quirk_resource_alignment+0x0/0x16e > [ 0.240760] pci 0000:0a:00.2: supports D1 D2 > [ 0.240762] pci 0000:0a:00.2: PME# supported from D0 D1 D2 D3hot > [ 0.240768] pci 0000:0a:00.2: PME# disabled > [ 0.240815] pci 0000:0a:00.3: [9710:9990] type 0 class 0x000c03 > [ 0.240819] pci 0000:0a:00.3: calling quirk_mmio_always_on+0x0/0x17 > [ 0.240838] pci 0000:0a:00.3: reg 10: [mem 0xf9ffb000-0xf9ffbfff] > [ 0.240931] pci 0000:0a:00.3: calling quirk_netmos+0x0/0x98 > [ 0.240933] pci 0000:0a:00.3: calling quirk_resource_alignment+0x0/0x16e > [ 0.240983] pci 0000:0a:00.3: supports D1 D2 > [ 0.240984] pci 0000:0a:00.3: PME# supported from D0 D1 D2 D3hot > [ 0.240990] pci 0000:0a:00.3: PME# disabled > [ 0.241030] pci 0000:0a:00.4: [9710:9990] type 0 class 0x000c03 > [ 0.241033] pci 0000:0a:00.4: calling quirk_mmio_always_on+0x0/0x17 > [ 0.241088] pci 0000:0a:00.4: reg 10: [mem 0xf9ffc000-0xf9ffcfff] > [ 0.241173] pci 0000:0a:00.4: calling quirk_netmos+0x0/0x98 > [ 0.241175] pci 0000:0a:00.4: calling quirk_resource_alignment+0x0/0x16e > [ 0.241224] pci 0000:0a:00.4: supports D1 D2 > [ 0.241226] pci 0000:0a:00.4: PME# supported from D0 D1 D2 D3hot > [ 0.241232] pci 0000:0a:00.4: PME# disabled > [ 0.241272] pci 0000:0a:00.5: [9710:9990] type 0 class 0x000c03 > [ 0.241276] pci 0000:0a:00.5: calling quirk_mmio_always_on+0x0/0x17 > [ 0.241295] pci 0000:0a:00.5: reg 10: [mem 0xf9ffd000-0xf9ffdfff] > [ 0.241394] pci 0000:0a:00.5: calling quirk_netmos+0x0/0x98 > [ 0.241396] pci 0000:0a:00.5: calling quirk_resource_alignment+0x0/0x16e > [ 0.241438] pci 0000:0a:00.5: supports D1 D2 > [ 0.241440] pci 0000:0a:00.5: PME# supported from D0 D1 D2 D3hot > [ 0.241446] pci 0000:0a:00.5: PME# disabled > [ 0.241493] pci 0000:0a:00.6: [9710:9990] type 0 class 0x000c03 > [ 0.241496] pci 0000:0a:00.6: calling quirk_mmio_always_on+0x0/0x17 > [ 0.241516] pci 0000:0a:00.6: reg 10: [mem 0xf9ffe000-0xf9ffefff] > [ 0.241608] pci 0000:0a:00.6: calling quirk_netmos+0x0/0x98 > [ 0.241611] pci 0000:0a:00.6: calling quirk_resource_alignment+0x0/0x16e > [ 0.241660] pci 0000:0a:00.6: supports D1 D2 > [ 0.241662] pci 0000:0a:00.6: PME# supported from D0 D1 D2 D3hot > [ 0.241667] pci 0000:0a:00.6: PME# disabled > [ 0.241710] pci 0000:0a:00.7: [9710:9990] type 0 class 0x000c03 > [ 0.241714] pci 0000:0a:00.7: calling quirk_mmio_always_on+0x0/0x17 > [ 0.241740] pci 0000:0a:00.7: reg 10: [mem 0xf9fff000-0xf9ffffff] > [ 0.241835] pci 0000:0a:00.7: calling quirk_netmos+0x0/0x98 > [ 0.241838] pci 0000:0a:00.7: calling quirk_resource_alignment+0x0/0x16e > [ 0.241880] pci 0000:0a:00.7: supports D1 D2 > [ 0.241881] pci 0000:0a:00.7: PME# supported from D0 D1 D2 D3hot > [ 0.241887] pci 0000:0a:00.7: PME# disabled > [ 0.248094] pci_bus 0000:0a: fixups for bus > [ 0.248097] pci 0000:00:03.0: PCI bridge to [bus 0a-0a] > [ 0.248106] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] > (disabled) > [ 0.248110] pci 0000:00:03.0: bridge window [mem 0xf9f00000-0xf9ffffff] > [ 0.248116] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff > pref] (disabled) > [ 0.248118] pci_bus 0000:0a: bus scan returning with max=0a > [ 0.248123] pci 0000:00:05.0: scanning [bus 09-09] behind bridge, pass 0 > [ 0.248176] pci_bus 0000:09: scanning bus > [ 0.248196] pci 0000:09:00.0: [10ec:8168] type 0 class 0x000200 > [ 0.248201] pci 0000:09:00.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.248229] pci 0000:09:00.0: reg 10: [io 0xd800-0xd8ff] > [ 0.248260] pci 0000:09:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit > pref] > [ 0.248280] pci 0000:09:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit > pref] > [ 0.248293] pci 0000:09:00.0: reg 30: [mem 0xf9ee0000-0xf9efffff pref] > [ 0.248300] pci 0000:09:00.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.248348] pci 0000:09:00.0: supports D1 D2 > [ 0.248350] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.248355] pci 0000:09:00.0: PME# disabled > [ 0.256047] pci_bus 0000:09: fixups for bus > [ 0.256050] pci 0000:00:05.0: PCI bridge to [bus 09-09] > [ 0.256058] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] > [ 0.256062] pci 0000:00:05.0: bridge window [mem 0xf9e00000-0xf9efffff] > [ 0.256068] pci 0000:00:05.0: bridge window [mem 0xcff00000-0xcfffffff > 64bit pref] > [ 0.256070] pci_bus 0000:09: bus scan returning with max=09 > [ 0.256075] pci 0000:00:06.0: scanning [bus 08-08] behind bridge, pass 0 > [ 0.256157] pci_bus 0000:08: scanning bus > [ 0.256178] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200 > [ 0.256183] pci 0000:08:00.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.256200] pci 0000:08:00.0: reg 10: [io 0xc800-0xc8ff] > [ 0.256230] pci 0000:08:00.0: reg 18: [mem 0xcfeff000-0xcfefffff 64bit > pref] > [ 0.256250] pci 0000:08:00.0: reg 20: [mem 0xcfef8000-0xcfefbfff 64bit > pref] > [ 0.256270] pci 0000:08:00.0: reg 30: [mem 0xf9de0000-0xf9dfffff pref] > [ 0.256277] pci 0000:08:00.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.256318] pci 0000:08:00.0: supports D1 D2 > [ 0.256320] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.256325] pci 0000:08:00.0: PME# disabled > [ 0.264054] pci_bus 0000:08: fixups for bus > [ 0.264057] pci 0000:00:06.0: PCI bridge to [bus 08-08] > [ 0.264065] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] > [ 0.264069] pci 0000:00:06.0: bridge window [mem 0xf9d00000-0xf9dfffff] > [ 0.264075] pci 0000:00:06.0: bridge window [mem 0xcfe00000-0xcfefffff > 64bit pref] > [ 0.264077] pci_bus 0000:08: bus scan returning with max=08 > [ 0.264081] pci 0000:00:0a.0: scanning [bus 06-07] behind bridge, pass 0 > [ 0.264134] pci_bus 0000:06: scanning bus > [ 0.264161] pci 0000:06:00.0: [104c:8231] type 1 class 0x000604 > [ 0.264166] pci 0000:06:00.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.264234] pci 0000:06:00.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.264280] pci 0000:06:00.0: supports D1 D2 > [ 0.264340] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You > can enable it with 'pcie_aspm=force' > [ 0.264352] pci_bus 0000:06: fixups for bus > [ 0.264354] pci 0000:00:0a.0: PCI bridge to [bus 06-07] > [ 0.264360] pci 0000:00:0a.0: bridge window [io 0xf000-0x0000] > (disabled) > [ 0.264364] pci 0000:00:0a.0: bridge window [mem 0xf9c00000-0xf9cfffff] > [ 0.264370] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff > pref] (disabled) > [ 0.264374] pci 0000:06:00.0: scanning [bus 07-07] behind bridge, pass 0 > [ 0.264454] pci_bus 0000:07: scanning bus > [ 0.264481] pci 0000:07:01.0: [1033:0035] type 0 class 0x000c03 > [ 0.264492] pci 0000:07:01.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.264513] pci 0000:07:01.0: reg 10: [mem 0xf9cfd000-0xf9cfdfff] > [ 0.264613] pci 0000:07:01.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.264616] pci 0000:07:01.0: Disabling memory decoding and releasing > memory resources. > [ 0.264656] pci 0000:07:01.0: supports D1 D2 > [ 0.264658] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot > [ 0.264664] pci 0000:07:01.0: PME# disabled > [ 0.264690] pci 0000:07:01.1: [1033:0035] type 0 class 0x000c03 > [ 0.264700] pci 0000:07:01.1: calling quirk_mmio_always_on+0x0/0x17 > [ 0.264728] pci 0000:07:01.1: reg 10: [mem 0xf9cfe000-0xf9cfefff] > [ 0.264829] pci 0000:07:01.1: calling quirk_resource_alignment+0x0/0x16e > [ 0.264831] pci 0000:07:01.1: Disabling memory decoding and releasing > memory resources. > [ 0.264864] pci 0000:07:01.1: supports D1 D2 > [ 0.264866] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot > [ 0.264872] pci 0000:07:01.1: PME# disabled > [ 0.264905] pci 0000:07:01.2: [1033:00e0] type 0 class 0x000c03 > [ 0.264916] pci 0000:07:01.2: calling quirk_mmio_always_on+0x0/0x17 > [ 0.264937] pci 0000:07:01.2: reg 10: [mem 0xf9cffc00-0xf9cffcff] > [ 0.265037] pci 0000:07:01.2: calling quirk_resource_alignment+0x0/0x16e > [ 0.265040] pci 0000:07:01.2: Disabling memory decoding and releasing > memory resources. > [ 0.265048] pci 0000:07:01.2: Rounding up size of resource #0 to 0x1000. > [ 0.265083] pci 0000:07:01.2: supports D1 D2 > [ 0.265085] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot > [ 0.265091] pci 0000:07:01.2: PME# disabled > [ 0.265182] pci_bus 0000:07: fixups for bus > [ 0.265184] pci 0000:06:00.0: PCI bridge to [bus 07-07] > [ 0.265194] pci 0000:06:00.0: bridge window [io 0xf000-0x0000] > (disabled) > [ 0.265200] pci 0000:06:00.0: bridge window [mem 0xf9c00000-0xf9cfffff] > [ 0.265209] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff > pref] (disabled) > [ 0.265211] pci_bus 0000:07: bus scan returning with max=07 > [ 0.265217] pci 0000:06:00.0: scanning [bus 07-07] behind bridge, pass 1 > [ 0.265224] pci_bus 0000:06: bus scan returning with max=07 > [ 0.265228] pci 0000:00:0b.0: scanning [bus 05-05] behind bridge, pass 0 > [ 0.265280] pci_bus 0000:05: scanning bus > [ 0.265296] pci 0000:05:00.0: [1002:95c5] type 0 class 0x000300 > [ 0.265300] pci 0000:05:00.0: calling quirk_no_ata_d3+0x0/0x1b > [ 0.265302] pci 0000:05:00.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.265323] pci 0000:05:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit > pref] > [ 0.265348] pci 0000:05:00.0: reg 18: [mem 0xf9be0000-0xf9beffff 64bit] > [ 0.265360] pci 0000:05:00.0: reg 20: [io 0xb000-0xb0ff] > [ 0.265382] pci 0000:05:00.0: reg 30: [mem 0xf9bc0000-0xf9bdffff pref] > [ 0.265388] pci 0000:05:00.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.265422] pci 0000:05:00.0: supports D1 D2 > [ 0.265452] pci 0000:05:00.1: [1002:aa28] type 0 class 0x000403 > [ 0.265457] pci 0000:05:00.1: calling quirk_no_ata_d3+0x0/0x1b > [ 0.265460] pci 0000:05:00.1: calling quirk_mmio_always_on+0x0/0x17 > [ 0.265481] pci 0000:05:00.1: reg 10: [mem 0xf9bfc000-0xf9bfffff 64bit] > [ 0.265544] pci 0000:05:00.1: calling quirk_resource_alignment+0x0/0x16e > [ 0.265571] pci 0000:05:00.1: supports D1 D2 > [ 0.272047] pci_bus 0000:05: fixups for bus > [ 0.272050] pci 0000:00:0b.0: PCI bridge to [bus 05-05] > [ 0.272059] pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff] > [ 0.272063] pci 0000:00:0b.0: bridge window [mem 0xf9b00000-0xf9bfffff] > [ 0.272069] pci 0000:00:0b.0: bridge window [mem 0xb0000000-0xbfffffff > 64bit pref] > [ 0.272071] pci_bus 0000:05: bus scan returning with max=05 > [ 0.272082] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 0 > [ 0.272128] pci_bus 0000:04: scanning bus > [ 0.272152] pci 0000:04:00.0: [9710:9990] type 0 class 0x000c03 > [ 0.272157] pci 0000:04:00.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.272183] pci 0000:04:00.0: reg 10: [mem 0xf9af8000-0xf9af8fff] > [ 0.272275] pci 0000:04:00.0: calling quirk_netmos+0x0/0x98 > [ 0.272277] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.272321] pci 0000:04:00.0: supports D1 D2 > [ 0.272323] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot > [ 0.272329] pci 0000:04:00.0: PME# disabled > [ 0.272377] pci 0000:04:00.1: [9710:9990] type 0 class 0x000c03 > [ 0.272380] pci 0000:04:00.1: calling quirk_mmio_always_on+0x0/0x17 > [ 0.272399] pci 0000:04:00.1: reg 10: [mem 0xf9af9000-0xf9af9fff] > [ 0.272489] pci 0000:04:00.1: calling quirk_netmos+0x0/0x98 > [ 0.272491] pci 0000:04:00.1: calling quirk_resource_alignment+0x0/0x16e > [ 0.272567] pci 0000:04:00.1: supports D1 D2 > [ 0.272569] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot > [ 0.272575] pci 0000:04:00.1: PME# disabled > [ 0.272614] pci 0000:04:00.2: [9710:9990] type 0 class 0x000c03 > [ 0.272617] pci 0000:04:00.2: calling quirk_mmio_always_on+0x0/0x17 > [ 0.272636] pci 0000:04:00.2: reg 10: [mem 0xf9afa000-0xf9afafff] > [ 0.272726] pci 0000:04:00.2: calling quirk_netmos+0x0/0x98 > [ 0.272728] pci 0000:04:00.2: calling quirk_resource_alignment+0x0/0x16e > [ 0.272777] pci 0000:04:00.2: supports D1 D2 > [ 0.272778] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot > [ 0.272784] pci 0000:04:00.2: PME# disabled > [ 0.272823] pci 0000:04:00.3: [9710:9990] type 0 class 0x000c03 > [ 0.272827] pci 0000:04:00.3: calling quirk_mmio_always_on+0x0/0x17 > [ 0.272845] pci 0000:04:00.3: reg 10: [mem 0xf9afb000-0xf9afbfff] > [ 0.272936] pci 0000:04:00.3: calling quirk_netmos+0x0/0x98 > [ 0.272938] pci 0000:04:00.3: calling quirk_resource_alignment+0x0/0x16e > [ 0.272986] pci 0000:04:00.3: supports D1 D2 > [ 0.272988] pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot > [ 0.272994] pci 0000:04:00.3: PME# disabled > [ 0.273040] pci 0000:04:00.4: [9710:9990] type 0 class 0x000c03 > [ 0.273043] pci 0000:04:00.4: calling quirk_mmio_always_on+0x0/0x17 > [ 0.273062] pci 0000:04:00.4: reg 10: [mem 0xf9afc000-0xf9afcfff] > [ 0.273152] pci 0000:04:00.4: calling quirk_netmos+0x0/0x98 > [ 0.273155] pci 0000:04:00.4: calling quirk_resource_alignment+0x0/0x16e > [ 0.273197] pci 0000:04:00.4: supports D1 D2 > [ 0.273199] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot > [ 0.273211] pci 0000:04:00.4: PME# disabled > [ 0.273256] pci 0000:04:00.5: [9710:9990] type 0 class 0x000c03 > [ 0.273260] pci 0000:04:00.5: calling quirk_mmio_always_on+0x0/0x17 > [ 0.273278] pci 0000:04:00.5: reg 10: [mem 0xf9afd000-0xf9afdfff] > [ 0.273369] pci 0000:04:00.5: calling quirk_netmos+0x0/0x98 > [ 0.273371] pci 0000:04:00.5: calling quirk_resource_alignment+0x0/0x16e > [ 0.273420] pci 0000:04:00.5: supports D1 D2 > [ 0.273421] pci 0000:04:00.5: PME# supported from D0 D1 D2 D3hot > [ 0.273427] pci 0000:04:00.5: PME# disabled > [ 0.273473] pci 0000:04:00.6: [9710:9990] type 0 class 0x000c03 > [ 0.273477] pci 0000:04:00.6: calling quirk_mmio_always_on+0x0/0x17 > [ 0.273496] pci 0000:04:00.6: reg 10: [mem 0xf9afe000-0xf9afefff] > [ 0.273586] pci 0000:04:00.6: calling quirk_netmos+0x0/0x98 > [ 0.273589] pci 0000:04:00.6: calling quirk_resource_alignment+0x0/0x16e > [ 0.273630] pci 0000:04:00.6: supports D1 D2 > [ 0.273632] pci 0000:04:00.6: PME# supported from D0 D1 D2 D3hot > [ 0.273644] pci 0000:04:00.6: PME# disabled > [ 0.273686] pci 0000:04:00.7: [9710:9990] type 0 class 0x000c03 > [ 0.273690] pci 0000:04:00.7: calling quirk_mmio_always_on+0x0/0x17 > [ 0.273709] pci 0000:04:00.7: reg 10: [mem 0xf9aff000-0xf9afffff] > [ 0.273800] pci 0000:04:00.7: calling quirk_netmos+0x0/0x98 > [ 0.273803] pci 0000:04:00.7: calling quirk_resource_alignment+0x0/0x16e > [ 0.273851] pci 0000:04:00.7: supports D1 D2 > [ 0.273853] pci 0000:04:00.7: PME# supported from D0 D1 D2 D3hot > [ 0.273859] pci 0000:04:00.7: PME# disabled > [ 0.280095] pci_bus 0000:04: fixups for bus > [ 0.280098] pci 0000:00:0d.0: PCI bridge to [bus 04-04] > [ 0.280106] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] > (disabled) > [ 0.280110] pci 0000:00:0d.0: bridge window [mem 0xf9a00000-0xf9afffff] > [ 0.280123] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff > pref] (disabled) > [ 0.280125] pci_bus 0000:04: bus scan returning with max=04 > [ 0.280131] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 0 > [ 0.280143] pci_bus 0000:03: scanning bus > [ 0.280171] pci 0000:03:06.0: [13f6:0111] type 0 class 0x000401 > [ 0.280182] pci 0000:03:06.0: calling quirk_mmio_always_on+0x0/0x17 > [ 0.280201] pci 0000:03:06.0: reg 10: [io 0xa800-0xa8ff] > [ 0.280300] pci 0000:03:06.0: calling quirk_resource_alignment+0x0/0x16e > [ 0.280327] pci 0000:03:06.0: supports D1 D2 > [ 0.280387] pci_bus 0000:03: fixups for bus > [ 0.280389] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive > decode) > [ 0.280395] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] > [ 0.280400] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] > (disabled) > [ 0.280405] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff > pref] (disabled) > [ 0.280408] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] > (subtractive decode) > [ 0.280410] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] > (subtractive decode) > [ 0.280412] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] > (subtractive decode) > [ 0.280414] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] > (subtractive decode) > [ 0.280416] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff] > (subtractive decode) > [ 0.280418] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] > (subtractive decode) > [ 0.280420] pci_bus 0000:03: bus scan returning with max=03 > [ 0.280425] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 0 > [ 0.280491] pci_bus 0000:02: scanning bus > [ 0.280494] pci_bus 0000:02: fixups for bus > [ 0.280496] pci 0000:00:15.0: PCI bridge to [bus 02-02] > [ 0.280504] pci 0000:00:15.0: bridge window [io 0xf000-0x0000] > (disabled) > [ 0.280509] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff] > (disabled) > [ 0.280516] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff > pref] (disabled) > [ 0.280518] pci_bus 0000:02: bus scan returning with max=02 > [ 0.280523] pci 0000:00:02.0: scanning [bus 0b-0b] behind bridge, pass 1 > [ 0.280528] pci 0000:00:03.0: scanning [bus 0a-0a] behind bridge, pass 1 > [ 0.280534] pci 0000:00:05.0: scanning [bus 09-09] behind bridge, pass 1 > [ 0.280540] pci 0000:00:06.0: scanning [bus 08-08] behind bridge, pass 1 > [ 0.280546] pci 0000:00:0a.0: scanning [bus 06-07] behind bridge, pass 1 > [ 0.280558] pci 0000:00:0b.0: scanning [bus 05-05] behind bridge, pass 1 > [ 0.280564] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 1 > [ 0.280570] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 1 > [ 0.280578] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 1 > [ 0.280584] pci_bus 0000:00: bus scan returning with max=0b > [ 0.280585] pci_bus 0000:00: on NUMA node 0 > [ 0.280590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.280671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT] > [ 0.280695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC03._PRT] > [ 0.280719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT] > [ 0.280776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT] > [ 0.280802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT] > [ 0.280823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT] > [ 0.280848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0D._PRT] > [ 0.280879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] > [ 0.280937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] > [ 0.281076] pci0000:00: Requesting ACPI _OSC control (0x1d) > [ 0.281259] pci0000:00: ACPI _OSC control (0x1d) granted > [ 0.296074] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15) > [ 0.296161] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15) > [ 0.296260] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) > [ 0.296349] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) > [ 0.296419] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15) > [ 0.296466] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) > [ 0.296521] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) > [ 0.296578] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 14 15) > [ 0.296610] xen/balloon: Initialising balloon driver. > [ 0.296610] last_pfn = 0x2b0000 max_arch_pfn = 0x400000000 > [ 0.321839] xen-balloon: Initialising balloon driver. > [ 0.321839] vgaarb: device added: > PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.321839] vgaarb: device added: > PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none > [ 0.321839] vgaarb: loaded > [ 0.321839] vgaarb: bridge control possible 0000:05:00.0 > [ 0.321839] vgaarb: bridge control possible 0000:0b:00.0 > [ 0.321839] SCSI subsystem initialized > [ 0.321839] libata version 3.00 loaded. > [ 0.321839] usbcore: registered new interface driver usbfs > [ 0.321839] usbcore: registered new interface driver hub > [ 0.321839] usbcore: registered new device driver usb > [ 0.321839] Advanced Linux Sound Architecture Driver Version 1.0.24. > [ 0.321839] PCI: Using ACPI for IRQ routing > [ 0.324019] PCI: pci_cache_line_size set to 64 bytes > [ 0.324019] pci 0000:00:11.0: BAR 0: reserving [io 0x7000-0x7007 flags > 0x40101] (d=0, p=0) > [ 0.324019] pci 0000:00:11.0: BAR 1: reserving [io 0x6000-0x6003 flags > 0x40101] (d=0, p=0) > [ 0.324019] pci 0000:00:11.0: BAR 2: reserving [io 0x5000-0x5007 flags > 0x40101] (d=0, p=0) > [ 0.324019] pci 0000:00:11.0: BAR 3: reserving [io 0x3000-0x3003 flags > 0x40101] (d=0, p=0) > [ 0.324019] pci 0000:00:11.0: BAR 4: reserving [io 0x2000-0x200f flags > 0x40101] (d=0, p=0) > [ 0.324019] pci 0000:00:11.0: BAR 5: reserving [mem 0xf98ff000-0xf98ff3ff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:00:12.0: BAR 0: reserving [mem 0xf98fb000-0xf98fbfff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:00:12.2: BAR 0: reserving [mem 0xf98ff400-0xf98ff4ff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:00:13.0: BAR 0: reserving [mem 0xf98fc000-0xf98fcfff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:00:13.2: BAR 0: reserving [mem 0xf98ff800-0xf98ff8ff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:00:14.1: BAR 0: reserving [io 0x01f0-0x01f7 flags > 0x110] (d=0, p=0) > [ 0.324019] pci 0000:00:14.1: BAR 1: reserving [io 0x03f6 flags 0x110] > (d=0, p=0) > [ 0.324019] pci 0000:00:14.1: BAR 2: reserving [io 0x0170-0x0177 flags > 0x110] (d=0, p=0) > [ 0.324019] pci 0000:00:14.1: BAR 3: reserving [io 0x0376 flags 0x110] > (d=0, p=0) > [ 0.324019] pci 0000:00:14.1: BAR 4: reserving [io 0xff00-0xff0f flags > 0x40101] (d=0, p=0) > [ 0.324019] pci 0000:00:14.5: BAR 0: reserving [mem 0xf98fd000-0xf98fdfff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:00:16.0: BAR 0: reserving [mem 0xf98fe000-0xf98fefff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:00:16.2: BAR 0: reserving [mem 0xf98ffc00-0xf98ffcff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:0b:00.0: BAR 0: reserving [mem 0xfd000000-0xfdffffff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:0b:00.0: BAR 1: reserving [mem 0xd0000000-0xdfffffff > flags 0x14220c] (d=0, p=0) > [ 0.324019] pci 0000:0b:00.0: BAR 3: reserving [mem 0xfa000000-0xfbffffff > flags 0x140204] (d=0, p=0) > [ 0.324019] pci 0000:0b:00.0: BAR 5: reserving [io 0xe800-0xe87f flags > 0x40101] (d=0, p=0) > [ 0.324019] pci 0000:0a:00.0: BAR 0: reserving [mem 0xf9ff8000-0xf9ff8fff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:0a:00.1: BAR 0: reserving [mem 0xf9ff9000-0xf9ff9fff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:0a:00.2: BAR 0: reserving [mem 0xf9ffa000-0xf9ffafff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:0a:00.3: BAR 0: reserving [mem 0xf9ffb000-0xf9ffbfff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:0a:00.4: BAR 0: reserving [mem 0xf9ffc000-0xf9ffcfff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:0a:00.5: BAR 0: reserving [mem 0xf9ffd000-0xf9ffdfff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:0a:00.6: BAR 0: reserving [mem 0xf9ffe000-0xf9ffefff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:0a:00.7: BAR 0: reserving [mem 0xf9fff000-0xf9ffffff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:09:00.0: BAR 0: reserving [io 0xd800-0xd8ff flags > 0x40101] (d=0, p=0) > [ 0.324019] pci 0000:09:00.0: BAR 2: reserving [mem 0xcffff000-0xcfffffff > flags 0x14220c] (d=0, p=0) > [ 0.324019] pci 0000:09:00.0: BAR 4: reserving [mem 0xcfff8000-0xcfffbfff > flags 0x14220c] (d=0, p=0) > [ 0.324019] pci 0000:08:00.0: BAR 0: reserving [io 0xc800-0xc8ff flags > 0x40101] (d=0, p=0) > [ 0.324019] pci 0000:08:00.0: BAR 2: reserving [mem 0xcfeff000-0xcfefffff > flags 0x14220c] (d=0, p=0) > [ 0.324019] pci 0000:08:00.0: BAR 4: reserving [mem 0xcfef8000-0xcfefbfff > flags 0x14220c] (d=0, p=0) > [ 0.324019] pci 0000:05:00.1: BAR 0: reserving [mem 0xf9bfc000-0xf9bfffff > flags 0x140204] (d=0, p=0) > [ 0.324019] pci 0000:04:00.0: BAR 0: reserving [mem 0xf9af8000-0xf9af8fff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:04:00.1: BAR 0: reserving [mem 0xf9af9000-0xf9af9fff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:04:00.2: BAR 0: reserving [mem 0xf9afa000-0xf9afafff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:04:00.3: BAR 0: reserving [mem 0xf9afb000-0xf9afbfff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:04:00.4: BAR 0: reserving [mem 0xf9afc000-0xf9afcfff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:04:00.5: BAR 0: reserving [mem 0xf9afd000-0xf9afdfff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:04:00.6: BAR 0: reserving [mem 0xf9afe000-0xf9afefff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:04:00.7: BAR 0: reserving [mem 0xf9aff000-0xf9afffff > flags 0x40200] (d=0, p=0) > [ 0.324019] pci 0000:03:06.0: BAR 0: reserving [io 0xa800-0xa8ff flags > 0x40101] (d=0, p=0) > [ 0.324019] pci 0000:05:00.0: BAR 0: reserving [mem 0xb0000000-0xbfffffff > flags 0x14220c] (d=1, p=1) > [ 0.324019] pci 0000:05:00.0: BAR 2: reserving [mem 0xf9be0000-0xf9beffff > flags 0x140204] (d=1, p=1) > [ 0.324019] pci 0000:05:00.0: BAR 4: reserving [io 0xb000-0xb0ff flags > 0x40101] (d=1, p=1) > [ 0.324049] reserve RAM buffer: 000000000009f000 - 000000000009ffff > [ 0.324075] NetLabel: Initializing > [ 0.324075] NetLabel: domain hash size = 128 > [ 0.324075] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.324075] NetLabel: unlabeled traffic allowed by default > [ 0.324144] Switching to clocksource xen > [ 0.324184] Switched to NOHz mode on CPU #5 > [ 0.327787] Switched to NOHz mode on CPU #0 > [ 0.328877] xen-pciback: wants to seize 0000:03:06.0 > [ 0.328880] xen-pciback: wants to seize 0000:04:00.0 > [ 0.328883] xen-pciback: wants to seize 0000:04:00.1 > [ 0.328885] xen-pciback: wants to seize 0000:04:00.2 > [ 0.328887] xen-pciback: wants to seize 0000:04:00.3 > [ 0.328889] xen-pciback: wants to seize 0000:04:00.4 > [ 0.328891] xen-pciback: wants to seize 0000:04:00.5 > [ 0.328893] xen-pciback: wants to seize 0000:04:00.6 > [ 0.328895] xen-pciback: wants to seize 0000:04:00.7 > [ 0.328897] xen-pciback: wants to seize 0000:0a:00.0 > [ 0.328899] xen-pciback: wants to seize 0000:0a:00.1 > [ 0.328901] xen-pciback: wants to seize 0000:0a:00.2 > [ 0.328903] xen-pciback: wants to seize 0000:0a:00.3 > [ 0.328905] xen-pciback: wants to seize 0000:0a:00.4 > [ 0.328907] xen-pciback: wants to seize 0000:0a:00.5 > [ 0.328909] xen-pciback: wants to seize 0000:0a:00.6 > [ 0.328911] xen-pciback: wants to seize 0000:0a:00.7 > [ 0.328913] xen-pciback: wants to seize 0000:05:00.0 > [ 0.328915] xen-pciback: wants to seize 0000:05:00.1 > [ 0.328917] xen-pciback: wants to seize 0000:07:01.0 > [ 0.328919] xen-pciback: wants to seize 0000:07:01.1 > [ 0.328921] xen-pciback: wants to seize 0000:07:01.2 > [ 0.328935] xen-pciback 0000:00:00.0: probing... > [ 0.328942] xen-pciback 0000:00:00.2: probing... > [ 0.328955] xen-pciback 0000:00:02.0: probing... > [ 0.328961] xen-pciback 0000:00:03.0: probing... > [ 0.328966] xen-pciback 0000:00:05.0: probing... > [ 0.328971] xen-pciback 0000:00:06.0: probing... > [ 0.328976] xen-pciback 0000:00:0a.0: probing... > [ 0.328981] xen-pciback 0000:00:0b.0: probing... > [ 0.328987] xen-pciback 0000:00:0d.0: probing... > [ 0.328992] xen-pciback 0000:00:11.0: probing... > [ 0.328997] xen-pciback 0000:00:12.0: probing... > [ 0.329001] xen-pciback 0000:00:12.2: probing... > [ 0.329006] xen-pciback 0000:00:13.0: probing... > [ 0.329011] xen-pciback 0000:00:13.2: probing... > [ 0.329016] xen-pciback 0000:00:14.0: probing... > [ 0.329020] xen-pciback 0000:00:14.1: probing... > [ 0.329025] xen-pciback 0000:00:14.3: probing... > [ 0.329030] xen-pciback 0000:00:14.4: probing... > [ 0.329042] xen-pciback 0000:00:14.5: probing... > [ 0.329047] xen-pciback 0000:00:15.0: probing... > [ 0.329052] xen-pciback 0000:00:16.0: probing... > [ 0.329056] xen-pciback 0000:00:16.2: probing... > [ 0.329061] xen-pciback 0000:00:18.0: probing... > [ 0.329066] xen-pciback 0000:00:18.1: probing... > [ 0.329070] xen-pciback 0000:00:18.2: probing... > [ 0.329075] xen-pciback 0000:00:18.3: probing... > [ 0.329080] xen-pciback 0000:00:18.4: probing... > [ 0.329084] xen-pciback 0000:0b:00.0: probing... > [ 0.329088] xen-pciback 0000:0a:00.0: probing... > [ 0.329090] xen-pciback 0000:0a:00.0: seizing device > [ 0.329094] xen-pciback 0000:0a:00.0: pcistub_device_alloc > [ 0.329096] xen-pciback 0000:0a:00.0: deferring initialization > [ 0.329100] xen-pciback 0000:0a:00.1: probing... > [ 0.329102] xen-pciback 0000:0a:00.1: seizing device > [ 0.329104] xen-pciback 0000:0a:00.1: pcistub_device_alloc > [ 0.329106] xen-pciback 0000:0a:00.1: deferring initialization > [ 0.329110] xen-pciback 0000:0a:00.2: probing... > [ 0.329112] xen-pciback 0000:0a:00.2: seizing device > [ 0.329114] xen-pciback 0000:0a:00.2: pcistub_device_alloc > [ 0.329116] xen-pciback 0000:0a:00.2: deferring initialization > [ 0.329155] xen-pciback 0000:0a:00.3: probing... > [ 0.329157] xen-pciback 0000:0a:00.3: seizing device > [ 0.329160] xen-pciback 0000:0a:00.3: pcistub_device_alloc > [ 0.329161] xen-pciback 0000:0a:00.3: deferring initialization > [ 0.329165] xen-pciback 0000:0a:00.4: probing... > [ 0.329167] xen-pciback 0000:0a:00.4: seizing device > [ 0.329170] xen-pciback 0000:0a:00.4: pcistub_device_alloc > [ 0.329171] xen-pciback 0000:0a:00.4: deferring initialization > [ 0.329175] xen-pciback 0000:0a:00.5: probing... > [ 0.329177] xen-pciback 0000:0a:00.5: seizing device > [ 0.329180] xen-pciback 0000:0a:00.5: pcistub_device_alloc > [ 0.329183] xen-pciback 0000:0a:00.5: deferring initialization > [ 0.329188] xen-pciback 0000:0a:00.6: probing... > [ 0.329189] xen-pciback 0000:0a:00.6: seizing device > [ 0.329192] xen-pciback 0000:0a:00.6: pcistub_device_alloc > [ 0.329194] xen-pciback 0000:0a:00.6: deferring initialization > [ 0.329198] xen-pciback 0000:0a:00.7: probing... > [ 0.329200] xen-pciback 0000:0a:00.7: seizing device > [ 0.329203] xen-pciback 0000:0a:00.7: pcistub_device_alloc > [ 0.329204] xen-pciback 0000:0a:00.7: deferring initialization > [ 0.329208] xen-pciback 0000:09:00.0: probing... > [ 0.329213] xen-pciback 0000:08:00.0: probing... > [ 0.329219] xen-pciback 0000:06:00.0: probing... > [ 0.329223] xen-pciback 0000:07:01.0: probing... > [ 0.329225] xen-pciback 0000:07:01.0: seizing device > [ 0.329228] xen-pciback 0000:07:01.0: pcistub_device_alloc > [ 0.329230] xen-pciback 0000:07:01.0: deferring initialization > [ 0.329234] xen-pciback 0000:07:01.1: probing... > [ 0.329236] xen-pciback 0000:07:01.1: seizing device > [ 0.329238] xen-pciback 0000:07:01.1: pcistub_device_alloc > [ 0.329240] xen-pciback 0000:07:01.1: deferring initialization > [ 0.329244] xen-pciback 0000:07:01.2: probing... > [ 0.329246] xen-pciback 0000:07:01.2: seizing device > [ 0.329248] xen-pciback 0000:07:01.2: pcistub_device_alloc > [ 0.329250] xen-pciback 0000:07:01.2: deferring initialization > [ 0.329254] xen-pciback 0000:05:00.0: probing... > [ 0.329256] xen-pciback 0000:05:00.0: seizing device > [ 0.329258] xen-pciback 0000:05:00.0: pcistub_device_alloc > [ 0.329260] xen-pciback 0000:05:00.0: deferring initialization > [ 0.329264] xen-pciback 0000:05:00.1: probing... > [ 0.329266] xen-pciback 0000:05:00.1: seizing device > [ 0.329268] xen-pciback 0000:05:00.1: pcistub_device_alloc > [ 0.329270] xen-pciback 0000:05:00.1: deferring initialization > [ 0.329274] xen-pciback 0000:04:00.0: probing... > [ 0.329276] xen-pciback 0000:04:00.0: seizing device > [ 0.329279] xen-pciback 0000:04:00.0: pcistub_device_alloc > [ 0.329281] xen-pciback 0000:04:00.0: deferring initialization > [ 0.329284] xen-pciback 0000:04:00.1: probing... > [ 0.329286] xen-pciback 0000:04:00.1: seizing device > [ 0.329289] xen-pciback 0000:04:00.1: pcistub_device_alloc > [ 0.329290] xen-pciback 0000:04:00.1: deferring initialization > [ 0.329301] xen-pciback 0000:04:00.2: probing... > [ 0.329303] xen-pciback 0000:04:00.2: seizing device > [ 0.329306] xen-pciback 0000:04:00.2: pcistub_device_alloc > [ 0.329307] xen-pciback 0000:04:00.2: deferring initialization > [ 0.329312] xen-pciback 0000:04:00.3: probing... > [ 0.329313] xen-pciback 0000:04:00.3: seizing device > [ 0.329316] xen-pciback 0000:04:00.3: pcistub_device_alloc > [ 0.329318] xen-pciback 0000:04:00.3: deferring initialization > [ 0.329322] xen-pciback 0000:04:00.4: probing... > [ 0.329324] xen-pciback 0000:04:00.4: seizing device > [ 0.329326] xen-pciback 0000:04:00.4: pcistub_device_alloc > [ 0.329328] xen-pciback 0000:04:00.4: deferring initialization > [ 0.329334] xen-pciback 0000:04:00.5: probing... > [ 0.329336] xen-pciback 0000:04:00.5: seizing device > [ 0.329338] xen-pciback 0000:04:00.5: pcistub_device_alloc > [ 0.329340] xen-pciback 0000:04:00.5: deferring initialization > [ 0.329344] xen-pciback 0000:04:00.6: probing... > [ 0.329346] xen-pciback 0000:04:00.6: seizing device > [ 0.329349] xen-pciback 0000:04:00.6: pcistub_device_alloc > [ 0.329350] xen-pciback 0000:04:00.6: deferring initialization > [ 0.329354] xen-pciback 0000:04:00.7: probing... > [ 0.329356] xen-pciback 0000:04:00.7: seizing device > [ 0.329359] xen-pciback 0000:04:00.7: pcistub_device_alloc > [ 0.329361] xen-pciback 0000:04:00.7: deferring initialization > [ 0.329365] xen-pciback 0000:03:06.0: probing... > [ 0.329367] xen-pciback 0000:03:06.0: seizing device > [ 0.329369] xen-pciback 0000:03:06.0: pcistub_device_alloc > [ 0.329371] xen-pciback 0000:03:06.0: deferring initialization > [ 0.329540] pnp: PnP ACPI init > [ 0.329550] ACPI: bus type pnp registered > [ 0.329699] pnp 00:00: [bus 00-ff] > [ 0.329701] pnp 00:00: [io 0x0cf8-0x0cff] > [ 0.329704] pnp 00:00: [io 0x0000-0x0cf7 window] > [ 0.329705] pnp 00:00: [io 0x0d00-0xffff window] > [ 0.329707] pnp 00:00: [mem 0x000a0000-0x000bffff window] > [ 0.329709] pnp 00:00: [mem 0x000d0000-0x000dffff window] > [ 0.329711] pnp 00:00: [mem 0xb0000000-0xdfffffff window] > [ 0.329713] pnp 00:00: [mem 0xf0000000-0xfebfffff window] > [ 0.329862] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) > [ 0.329972] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] > [ 0.329975] pnp 00:01: [mem 0xfec20000-0xfec200ff] > [ 0.330104] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved > [ 0.330109] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.330158] pnp 00:02: [mem 0xf6000000-0xf6003fff] > [ 0.330241] system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved > [ 0.330253] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.331692] Switched to NOHz mode on CPU #3 > [ 0.331915] Switched to NOHz mode on CPU #4 > [ 0.334948] Switched to NOHz mode on CPU #1 > [ 0.335155] Switched to NOHz mode on CPU #2 > [ 0.556162] pnp 00:03: [dma 4] > [ 0.556165] pnp 00:03: [io 0x0000-0x000f] > [ 0.556167] pnp 00:03: [io 0x0081-0x0083] > [ 0.556168] pnp 00:03: [io 0x0087] > [ 0.556170] pnp 00:03: [io 0x0089-0x008b] > [ 0.556172] pnp 00:03: [io 0x008f] > [ 0.556173] pnp 00:03: [io 0x00c0-0x00df] > [ 0.556305] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) > [ 0.556317] pnp 00:04: [io 0x0070-0x0071] > [ 0.556320] xen: registering gsi 8 triggering 1 polarity 0 > [ 0.556325] xen_map_pirq_gsi: returning irq 8 for gsi 8 > [ 0.556330] xen: --> pirq=8 -> irq=8 > [ 0.556364] pnp 00:04: [irq 8] > [ 0.556453] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.556501] pnp 00:05: [io 0x0061] > [ 0.556632] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) > [ 0.556641] pnp 00:06: [io 0x00f0-0x00ff] > [ 0.556643] xen: registering gsi 13 triggering 1 polarity 0 > [ 0.556646] xen_map_pirq_gsi: returning irq 13 for gsi 13 > [ 0.556649] xen: --> pirq=13 -> irq=13 > [ 0.556667] pnp 00:06: [irq 13] > [ 0.556752] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) > [ 0.557002] pnp 00:07: [io 0x03f8-0x03ff] > [ 0.557004] xen: registering gsi 4 triggering 1 polarity 0 > [ 0.557007] xen_map_pirq_gsi: returning irq 4 for gsi 4 > [ 0.557010] xen: --> pirq=4 -> irq=4 > [ 0.557011] Already setup the GSI :4 > [ 0.557014] pnp 00:07: [irq 4] > [ 0.557016] pnp 00:07: [dma 0 disabled] > [ 0.557154] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) > [ 0.557260] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] > [ 0.557262] pnp 00:08: [io 0x0600-0x06df] > [ 0.557264] pnp 00:08: [io 0x0ae0-0x0aef] > [ 0.557408] system 00:08: [io 0x0600-0x06df] has been reserved > [ 0.557412] system 00:08: [io 0x0ae0-0x0aef] has been reserved > [ 0.557416] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.557445] pnp 00:09: [mem 0xfed00000-0xfed003ff] > [ 0.557533] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) > [ 0.557637] pnp 00:0a: [io 0x0060] > [ 0.557639] pnp 00:0a: [io 0x0064] > [ 0.557641] pnp 00:0a: [mem 0xfec00000-0xfec00fff] > [ 0.557643] pnp 00:0a: [mem 0xfee00000-0xfee00fff] > [ 0.557781] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved > [ 0.557786] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved > [ 0.557790] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.557997] pnp 00:0b: [io 0x0010-0x001f] > [ 0.557999] pnp 00:0b: [io 0x0022-0x003f] > [ 0.558001] pnp 00:0b: [io 0x0062-0x0063] > [ 0.558002] pnp 00:0b: [io 0x0065-0x006f] > [ 0.558004] pnp 00:0b: [io 0x0072-0x007f] > [ 0.558006] pnp 00:0b: [io 0x0080] > [ 0.558007] pnp 00:0b: [io 0x0084-0x0086] > [ 0.558009] pnp 00:0b: [io 0x0088] > [ 0.558011] pnp 00:0b: [io 0x008c-0x008e] > [ 0.558012] pnp 00:0b: [io 0x0090-0x009f] > [ 0.558014] pnp 00:0b: [io 0x00a2-0x00bf] > [ 0.558016] pnp 00:0b: [io 0x00b1] > [ 0.558017] pnp 00:0b: [io 0x00e0-0x00ef] > [ 0.558019] pnp 00:0b: [io 0x04d0-0x04d1] > [ 0.558021] pnp 00:0b: [io 0x040b] > [ 0.558022] pnp 00:0b: [io 0x04d6] > [ 0.558024] pnp 00:0b: [io 0x0c00-0x0c01] > [ 0.558026] pnp 00:0b: [io 0x0c14] > [ 0.558027] pnp 00:0b: [io 0x0c50-0x0c51] > [ 0.558029] pnp 00:0b: [io 0x0c52] > [ 0.558031] pnp 00:0b: [io 0x0c6c] > [ 0.558032] pnp 00:0b: [io 0x0c6f] > [ 0.558034] pnp 00:0b: [io 0x0cd0-0x0cd1] > [ 0.558036] pnp 00:0b: [io 0x0cd2-0x0cd3] > [ 0.558037] pnp 00:0b: [io 0x0cd4-0x0cd5] > [ 0.558039] pnp 00:0b: [io 0x0cd6-0x0cd7] > [ 0.558041] pnp 00:0b: [io 0x0cd8-0x0cdf] > [ 0.558044] pnp 00:0b: [io 0x0800-0x089f] > [ 0.558046] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] > [ 0.558048] pnp 00:0b: [io 0x0b00-0x0b1f] > [ 0.558050] pnp 00:0b: [io 0x0b20-0x0b3f] > [ 0.558051] pnp 00:0b: [io 0x0900-0x090f] > [ 0.558053] pnp 00:0b: [io 0x0910-0x091f] > [ 0.558055] pnp 00:0b: [io 0xfe00-0xfefe] > [ 0.558056] pnp 00:0b: [io 0x0060] > [ 0.558058] pnp 00:0b: [io 0x0064] > [ 0.558060] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] > [ 0.558062] pnp 00:0b: [mem 0xffb80000-0xffbfffff] > [ 0.558064] pnp 00:0b: [mem 0xfec10000-0xfec1001f] > [ 0.558066] pnp 00:0b: [mem 0xfed80000-0xfed80fff] > [ 0.558068] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] > [ 0.558264] system 00:0b: [io 0x04d0-0x04d1] has been reserved > [ 0.558268] system 00:0b: [io 0x040b] has been reserved > [ 0.558271] system 00:0b: [io 0x04d6] has been reserved > [ 0.558274] system 00:0b: [io 0x0c00-0x0c01] has been reserved > [ 0.558277] system 00:0b: [io 0x0c14] has been reserved > [ 0.558280] system 00:0b: [io 0x0c50-0x0c51] has been reserved > [ 0.558283] system 00:0b: [io 0x0c52] has been reserved > [ 0.558286] system 00:0b: [io 0x0c6c] has been reserved > [ 0.558288] system 00:0b: [io 0x0c6f] has been reserved > [ 0.558291] system 00:0b: [io 0x0cd0-0x0cd1] has been reserved > [ 0.558294] system 00:0b: [io 0x0cd2-0x0cd3] has been reserved > [ 0.558298] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved > [ 0.558301] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved > [ 0.558304] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved > [ 0.558307] system 00:0b: [io 0x0800-0x089f] has been reserved > [ 0.558310] system 00:0b: [io 0x0b00-0x0b1f] has been reserved > [ 0.558313] system 00:0b: [io 0x0b20-0x0b3f] has been reserved > [ 0.558317] system 00:0b: [io 0x0900-0x090f] has been reserved > [ 0.558320] system 00:0b: [io 0x0910-0x091f] has been reserved > [ 0.558323] system 00:0b: [io 0xfe00-0xfefe] has been reserved > [ 0.558327] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved > [ 0.558330] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved > [ 0.558334] system 00:0b: [mem 0xfed80000-0xfed80fff] has been reserved > [ 0.558338] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.558393] pnp 00:0c: [mem 0xe0000000-0xefffffff] > [ 0.558535] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved > [ 0.558539] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.558695] pnp 00:0d: [mem 0x00000000-0x0009ffff] > [ 0.558697] pnp 00:0d: [mem 0x000c0000-0x000cffff] > [ 0.558699] pnp 00:0d: [mem 0x000e0000-0x000fffff] > [ 0.558701] pnp 00:0d: [mem 0x00100000-0xafffffff] > [ 0.558703] pnp 00:0d: [mem 0xfec00000-0xffffffff] > [ 0.558850] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved > [ 0.558854] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved > [ 0.558857] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved > [ 0.558868] system 00:0d: [mem 0x00100000-0xafffffff] could not be reserved > [ 0.558872] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved > [ 0.558876] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.559003] pnp: PnP ACPI: found 14 devices > [ 0.559006] ACPI: ACPI bus type pnp unregistered > [ 0.565638] PM-Timer failed consistency check (0x0xffffff) - aborting. > [ 0.565666] PCI: max bus depth: 2 pci_try_num: 3 > [ 0.565751] pci 0000:00:02.0: PCI bridge to [bus 0b-0b] > [ 0.565756] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] > [ 0.565762] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff] > [ 0.565767] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff > 64bit pref] > [ 0.565775] pci 0000:00:03.0: PCI bridge to [bus 0a-0a] > [ 0.565778] pci 0000:00:03.0: bridge window [io disabled] > [ 0.565784] pci 0000:00:03.0: bridge window [mem 0xf9f00000-0xf9ffffff] > [ 0.565788] pci 0000:00:03.0: bridge window [mem pref disabled] > [ 0.565802] pci 0000:00:05.0: PCI bridge to [bus 09-09] > [ 0.565806] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] > [ 0.565819] pci 0000:00:05.0: bridge window [mem 0xf9e00000-0xf9efffff] > [ 0.565824] pci 0000:00:05.0: bridge window [mem 0xcff00000-0xcfffffff > 64bit pref] > [ 0.565831] pci 0000:00:06.0: PCI bridge to [bus 08-08] > [ 0.565835] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] > [ 0.565841] pci 0000:00:06.0: bridge window [mem 0xf9d00000-0xf9dfffff] > [ 0.565846] pci 0000:00:06.0: bridge window [mem 0xcfe00000-0xcfefffff > 64bit pref] > [ 0.565855] xen-pciback 0000:07:01.0: BAR 0: assigned [mem > 0xf9c00000-0xf9c00fff] > [ 0.565864] xen-pciback 0000:07:01.0: BAR 0: set to [mem > 0xf9c00000-0xf9c00fff] (PCI address [0xf9c00000-0xf9c00fff]) > [ 0.565868] xen-pciback 0000:07:01.1: BAR 0: assigned [mem > 0xf9c01000-0xf9c01fff] > [ 0.565877] xen-pciback 0000:07:01.1: BAR 0: set to [mem > 0xf9c01000-0xf9c01fff] (PCI address [0xf9c01000-0xf9c01fff]) > [ 0.565888] xen-pciback 0000:07:01.2: BAR 0: assigned [mem > 0xf9c02000-0xf9c02fff] > [ 0.565896] xen-pciback 0000:07:01.2: BAR 0: set to [mem > 0xf9c02000-0xf9c02fff] (PCI address [0xf9c02000-0xf9c02fff]) > [ 0.565900] pci 0000:06:00.0: PCI bridge to [bus 07-07] > [ 0.565903] pci 0000:06:00.0: bridge window [io disabled] > [ 0.565911] pci 0000:06:00.0: bridge window [mem 0xf9c00000-0xf9cfffff] > [ 0.565918] pci 0000:06:00.0: bridge window [mem pref disabled] > [ 0.565928] pci 0000:00:0a.0: PCI bridge to [bus 06-07] > [ 0.565930] pci 0000:00:0a.0: bridge window [io disabled] > [ 0.565936] pci 0000:00:0a.0: bridge window [mem 0xf9c00000-0xf9cfffff] > [ 0.565941] pci 0000:00:0a.0: bridge window [mem pref disabled] > [ 0.565948] pci 0000:00:0b.0: PCI bridge to [bus 05-05] > [ 0.565951] pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff] > [ 0.565957] pci 0000:00:0b.0: bridge window [mem 0xf9b00000-0xf9bfffff] > [ 0.565962] pci 0000:00:0b.0: bridge window [mem 0xb0000000-0xbfffffff > 64bit pref] > [ 0.565977] pci 0000:00:0d.0: PCI bridge to [bus 04-04] > [ 0.565979] pci 0000:00:0d.0: bridge window [io disabled] > [ 0.565985] pci 0000:00:0d.0: bridge window [mem 0xf9a00000-0xf9afffff] > [ 0.565990] pci 0000:00:0d.0: bridge window [mem pref disabled] > [ 0.565999] pci 0000:00:14.4: PCI bridge to [bus 03-03] > [ 0.566003] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] > [ 0.566010] pci 0000:00:14.4: bridge window [mem disabled] > [ 0.566015] pci 0000:00:14.4: bridge window [mem pref disabled] > [ 0.566024] pci 0000:00:15.0: PCI bridge to [bus 02-02] > [ 0.566027] pci 0000:00:15.0: bridge window [io disabled] > [ 0.566033] pci 0000:00:15.0: bridge window [mem disabled] > [ 0.566038] pci 0000:00:15.0: bridge window [mem pref disabled] > [ 0.566060] xen: registering gsi 52 triggering 0 polarity 1 > [ 0.566070] xen: --> pirq=52 -> irq=52 > [ 0.566090] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 > [ 0.566097] pci 0000:00:02.0: setting latency timer to 64 > [ 0.566104] xen: registering gsi 52 triggering 0 polarity 1 > [ 0.566106] xen_map_pirq_gsi: returning irq 52 for gsi 52 > [ 0.566109] xen: --> pirq=52 -> irq=52 > [ 0.566111] Already setup the GSI :52 > [ 0.566114] pci 0000:00:03.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 > [ 0.566119] pci 0000:00:03.0: setting latency timer to 64 > [ 0.566125] xen: registering gsi 52 triggering 0 polarity 1 > [ 0.566127] xen_map_pirq_gsi: returning irq 52 for gsi 52 > [ 0.566129] xen: --> pirq=52 -> irq=52 > [ 0.566131] Already setup the GSI :52 > [ 0.566134] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 > [ 0.566139] pci 0000:00:05.0: setting latency timer to 64 > [ 0.566152] xen: registering gsi 53 triggering 0 polarity 1 > [ 0.566157] xen: --> pirq=53 -> irq=53 > [ 0.566172] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 > [ 0.566178] pci 0000:00:06.0: setting latency timer to 64 > [ 0.566184] xen: registering gsi 54 triggering 0 polarity 1 > [ 0.566189] xen: --> pirq=54 -> irq=54 > [ 0.566203] pci 0000:00:0a.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 > [ 0.566210] pci 0000:00:0a.0: setting latency timer to 64 > [ 0.566220] pci 0000:06:00.0: setting latency timer to 64 > [ 0.566262] xen: registering gsi 54 triggering 0 polarity 1 > [ 0.566264] xen_map_pirq_gsi: returning irq 54 for gsi 54 > [ 0.566267] xen: --> pirq=54 -> irq=54 > [ 0.566269] Already setup the GSI :54 > [ 0.566271] pci 0000:00:0b.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 > [ 0.566277] pci 0000:00:0b.0: setting latency timer to 64 > [ 0.566282] xen: registering gsi 54 triggering 0 polarity 1 > [ 0.566284] xen_map_pirq_gsi: returning irq 54 for gsi 54 > [ 0.566287] xen: --> pirq=54 -> irq=54 > [ 0.566289] Already setup the GSI :54 > [ 0.566291] pci 0000:00:0d.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 > [ 0.566296] pci 0000:00:0d.0: setting latency timer to 64 > [ 0.566309] xen: registering gsi 16 triggering 0 polarity 1 > [ 0.566313] xen: --> pirq=16 -> irq=16 > [ 0.566329] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.566336] pci 0000:00:15.0: setting latency timer to 64 > [ 0.566340] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 0.566342] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > [ 0.566344] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.566346] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] > [ 0.566348] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xdfffffff] > [ 0.566351] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] > [ 0.566353] pci_bus 0000:0b: resource 0 [io 0xe000-0xefff] > [ 0.566355] pci_bus 0000:0b: resource 1 [mem 0xfa000000-0xfe9fffff] > [ 0.566357] pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xdfffffff 64bit > pref] > [ 0.566359] pci_bus 0000:0a: resource 1 [mem 0xf9f00000-0xf9ffffff] > [ 0.566361] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] > [ 0.566363] pci_bus 0000:09: resource 1 [mem 0xf9e00000-0xf9efffff] > [ 0.566366] pci_bus 0000:09: resource 2 [mem 0xcff00000-0xcfffffff 64bit > pref] > [ 0.566368] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff] > [ 0.566370] pci_bus 0000:08: resource 1 [mem 0xf9d00000-0xf9dfffff] > [ 0.566372] pci_bus 0000:08: resource 2 [mem 0xcfe00000-0xcfefffff 64bit > pref] > [ 0.566374] pci_bus 0000:06: resource 1 [mem 0xf9c00000-0xf9cfffff] > [ 0.566376] pci_bus 0000:07: resource 1 [mem 0xf9c00000-0xf9cfffff] > [ 0.566378] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff] > [ 0.566380] pci_bus 0000:05: resource 1 [mem 0xf9b00000-0xf9bfffff] > [ 0.566383] pci_bus 0000:05: resource 2 [mem 0xb0000000-0xbfffffff 64bit > pref] > [ 0.566385] pci_bus 0000:04: resource 1 [mem 0xf9a00000-0xf9afffff] > [ 0.566387] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] > [ 0.566389] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] > [ 0.566391] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] > [ 0.566393] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.566395] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] > [ 0.566397] pci_bus 0000:03: resource 8 [mem 0xb0000000-0xdfffffff] > [ 0.566399] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] > [ 0.566428] NET: Registered protocol family 2 > [ 0.566469] IP route cache hash table entries: 262144 (order: 9, 2097152 > bytes) > [ 0.567038] TCP established hash table entries: 262144 (order: 10, 4194304 > bytes) > [ 0.568156] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 0.568434] TCP: Hash tables configured (established 262144 bind 65536) > [ 0.568438] TCP reno registered > [ 0.568443] UDP hash table entries: 4096 (order: 5, 131072 bytes) > [ 0.568487] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) > [ 0.568610] NET: Registered protocol family 1 > [ 0.568625] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 0.568630] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 0.568634] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xb1 > [ 0.568643] pci 0000:00:00.2: calling quirk_cardbus_legacy+0x0/0x30 > [ 0.568646] pci 0000:00:00.2: calling quirk_usb_early_handoff+0x0/0x573 > [ 0.568648] pci 0000:00:00.2: calling pci_fixup_video+0x0/0xb1 > [ 0.568653] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 0.568662] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 0.568665] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xb1 > [ 0.568670] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 0.568673] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 0.568678] pci 0000:00:03.0: calling pci_fixup_video+0x0/0xb1 > [ 0.568685] pci 0000:00:05.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 0.568688] pci 0000:00:05.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 0.568691] pci 0000:00:05.0: calling pci_fixup_video+0x0/0xb1 > [ 0.568695] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 0.568698] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 0.568700] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xb1 > [ 0.568705] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 0.568707] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 0.568710] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xb1 > [ 0.568714] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 0.568717] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 0.568720] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xb1 > [ 0.568724] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 0.568727] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 0.568729] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xb1 > [ 0.568734] pci 0000:00:11.0: calling > quirk_msi_intx_disable_ati_bug+0x0/0x41 > [ 0.568746] pci 0000:00:11.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 0.568749] pci 0000:00:11.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 0.568751] pci 0000:00:11.0: calling pci_fixup_video+0x0/0xb1 > [ 0.568756] pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 0.568759] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.336108] pci 0000:00:12.0: calling pci_fixup_video+0x0/0xb1 > [ 1.336119] pci 0000:00:12.2: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.336122] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.336237] pci 0000:00:12.2: calling pci_fixup_video+0x0/0xb1 > [ 1.336243] pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.336246] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.364106] pci 0000:00:13.0: calling pci_fixup_video+0x0/0xb1 > [ 1.364116] pci 0000:00:13.2: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.364118] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.364231] pci 0000:00:13.2: calling pci_fixup_video+0x0/0xb1 > [ 1.364237] pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.364240] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.364250] pci 0000:00:14.0: calling pci_fixup_video+0x0/0xb1 > [ 1.364255] pci 0000:00:14.1: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.364258] pci 0000:00:14.1: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.364261] pci 0000:00:14.1: calling pci_fixup_video+0x0/0xb1 > [ 1.364266] pci 0000:00:14.3: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.364269] pci 0000:00:14.3: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.364271] pci 0000:00:14.3: calling pci_fixup_video+0x0/0xb1 > [ 1.364276] pci 0000:00:14.4: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.364279] pci 0000:00:14.4: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.364282] pci 0000:00:14.4: calling pci_fixup_video+0x0/0xb1 > [ 1.364287] pci 0000:00:14.5: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.364290] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.388102] pci 0000:00:14.5: calling pci_fixup_video+0x0/0xb1 > [ 1.388112] pci 0000:00:15.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.388114] pci 0000:00:15.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.388117] pci 0000:00:15.0: calling pci_fixup_video+0x0/0xb1 > [ 1.388122] pci 0000:00:16.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.388124] pci 0000:00:16.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.412105] pci 0000:00:16.0: calling pci_fixup_video+0x0/0xb1 > [ 1.412115] pci 0000:00:16.2: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412118] pci 0000:00:16.2: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.412230] pci 0000:00:16.2: calling pci_fixup_video+0x0/0xb1 > [ 1.412236] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412246] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.412249] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xb1 > [ 1.412254] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412257] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.412259] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xb1 > [ 1.412264] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412267] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.412269] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xb1 > [ 1.412274] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412277] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.412280] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xb1 > [ 1.412284] pci 0000:00:18.4: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412287] pci 0000:00:18.4: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.412290] pci 0000:00:18.4: calling pci_fixup_video+0x0/0xb1 > [ 1.412295] pci 0000:0b:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd > [ 1.412310] pci 0000:0b:00.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412313] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.412316] pci 0000:0b:00.0: calling pci_fixup_video+0x0/0xb1 > [ 1.412334] pci 0000:0b:00.0: Boot video device > [ 1.412339] xen-pciback 0000:0a:00.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412342] xen-pciback 0000:0a:00.0: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412401] xen-pciback 0000:0a:00.0: calling pci_fixup_video+0x0/0xb1 > [ 1.412409] xen-pciback 0000:0a:00.1: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412419] xen-pciback 0000:0a:00.1: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412451] xen-pciback 0000:0a:00.1: calling pci_fixup_video+0x0/0xb1 > [ 1.412458] xen-pciback 0000:0a:00.2: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412461] xen-pciback 0000:0a:00.2: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412490] xen-pciback 0000:0a:00.2: calling pci_fixup_video+0x0/0xb1 > [ 1.412505] xen-pciback 0000:0a:00.3: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412508] xen-pciback 0000:0a:00.3: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412539] xen-pciback 0000:0a:00.3: calling pci_fixup_video+0x0/0xb1 > [ 1.412546] xen-pciback 0000:0a:00.4: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412549] xen-pciback 0000:0a:00.4: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412576] xen-pciback 0000:0a:00.4: calling pci_fixup_video+0x0/0xb1 > [ 1.412619] xen-pciback 0000:0a:00.5: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412622] xen-pciback 0000:0a:00.5: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412653] xen-pciback 0000:0a:00.5: calling pci_fixup_video+0x0/0xb1 > [ 1.412660] xen-pciback 0000:0a:00.6: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412663] xen-pciback 0000:0a:00.6: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412691] xen-pciback 0000:0a:00.6: calling pci_fixup_video+0x0/0xb1 > [ 1.412698] xen-pciback 0000:0a:00.7: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412701] xen-pciback 0000:0a:00.7: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412732] xen-pciback 0000:0a:00.7: calling pci_fixup_video+0x0/0xb1 > [ 1.412739] pci 0000:09:00.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412741] pci 0000:09:00.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.412744] pci 0000:09:00.0: calling pci_fixup_video+0x0/0xb1 > [ 1.412750] pci 0000:08:00.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412753] pci 0000:08:00.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.412755] pci 0000:08:00.0: calling pci_fixup_video+0x0/0xb1 > [ 1.412768] pci 0000:06:00.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412771] pci 0000:06:00.0: calling quirk_xio2000a+0x0/0x84 > [ 1.412773] pci 0000:06:00.0: TI XIO2000a quirk detected; secondary bus > fast back-to-back transfers disabled > [ 1.412787] pci 0000:06:00.0: calling quirk_usb_early_handoff+0x0/0x573 > [ 1.412790] pci 0000:06:00.0: calling pci_fixup_video+0x0/0xb1 > [ 1.412795] xen-pciback 0000:07:01.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412798] xen-pciback 0000:07:01.0: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412803] xen-pciback 0000:07:01.0: calling pci_fixup_video+0x0/0xb1 > [ 1.412809] xen-pciback 0000:07:01.1: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412812] xen-pciback 0000:07:01.1: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412817] xen-pciback 0000:07:01.1: calling pci_fixup_video+0x0/0xb1 > [ 1.412823] xen-pciback 0000:07:01.2: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412826] xen-pciback 0000:07:01.2: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412831] xen-pciback 0000:07:01.2: calling pci_fixup_video+0x0/0xb1 > [ 1.412837] xen-pciback 0000:05:00.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412840] xen-pciback 0000:05:00.0: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412843] xen-pciback 0000:05:00.0: calling pci_fixup_video+0x0/0xb1 > [ 1.412856] xen-pciback 0000:05:00.1: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412859] xen-pciback 0000:05:00.1: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412862] xen-pciback 0000:05:00.1: calling pci_fixup_video+0x0/0xb1 > [ 1.412873] xen-pciback 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412876] xen-pciback 0000:04:00.0: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.412961] xen-pciback 0000:04:00.0: calling pci_fixup_video+0x0/0xb1 > [ 1.412968] xen-pciback 0000:04:00.1: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.412971] xen-pciback 0000:04:00.1: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.413120] xen-pciback 0000:04:00.1: calling pci_fixup_video+0x0/0xb1 > [ 1.413127] xen-pciback 0000:04:00.2: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.413130] xen-pciback 0000:04:00.2: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.413174] xen-pciback 0000:04:00.2: calling pci_fixup_video+0x0/0xb1 > [ 1.413183] xen-pciback 0000:04:00.3: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.413188] xen-pciback 0000:04:00.3: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.413227] xen-pciback 0000:04:00.3: calling pci_fixup_video+0x0/0xb1 > [ 1.413234] xen-pciback 0000:04:00.4: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.413237] xen-pciback 0000:04:00.4: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.413265] xen-pciback 0000:04:00.4: calling pci_fixup_video+0x0/0xb1 > [ 1.413272] xen-pciback 0000:04:00.5: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.413275] xen-pciback 0000:04:00.5: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.413313] xen-pciback 0000:04:00.5: calling pci_fixup_video+0x0/0xb1 > [ 1.413320] xen-pciback 0000:04:00.6: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.413323] xen-pciback 0000:04:00.6: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.413350] xen-pciback 0000:04:00.6: calling pci_fixup_video+0x0/0xb1 > [ 1.413357] xen-pciback 0000:04:00.7: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.413360] xen-pciback 0000:04:00.7: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.413398] xen-pciback 0000:04:00.7: calling pci_fixup_video+0x0/0xb1 > [ 1.413405] xen-pciback 0000:03:06.0: calling quirk_cardbus_legacy+0x0/0x30 > [ 1.413408] xen-pciback 0000:03:06.0: calling > quirk_usb_early_handoff+0x0/0x573 > [ 1.413411] xen-pciback 0000:03:06.0: calling pci_fixup_video+0x0/0xb1 > [ 1.413417] PCI: CLS 64 bytes, default 64 > [ 1.413468] Trying to unpack rootfs image as initramfs... > [ 1.423693] Freeing initrd memory: 10024k freed > [ 1.428551] audit: initializing netlink socket (disabled) > [ 1.428569] type=2000 audit(1308662314.490:1): initialized > [ 1.431032] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 1.434634] VFS: Disk quotas dquot_6.5.2 > [ 1.434710] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 1.435890] fuse init (API version 7.16) > [ 1.436536] Btrfs loaded > [ 1.436543] msgmni has been set to 1111 > [ 1.436624] SELinux: Registering netfilter hooks > [ 1.437259] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 253) > [ 1.437264] io scheduler noop registered > [ 1.437266] io scheduler deadline registered > [ 1.437331] io scheduler cfq registered (default) > [ 1.437490] pcieport 0000:00:02.0: setting latency timer to 64 > [ 1.437656] pcieport 0000:00:03.0: setting latency timer to 64 > [ 1.437825] pcieport 0000:00:05.0: setting latency timer to 64 > [ 1.437971] pcieport 0000:00:06.0: setting latency timer to 64 > [ 1.438138] pcieport 0000:00:0a.0: setting latency timer to 64 > [ 1.438286] pcieport 0000:00:0b.0: setting latency timer to 64 > [ 1.438451] pcieport 0000:00:0d.0: setting latency timer to 64 > [ 1.438608] pcieport 0000:00:15.0: setting latency timer to 64 > [ 1.438937] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt > [ 1.438941] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt > [ 1.438947] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded > [ 1.438964] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt > [ 1.438968] xen-pciback 0000:0a:00.0: Signaling PME through PCIe PME > interrupt > [ 1.438972] xen-pciback 0000:0a:00.1: Signaling PME through PCIe PME > interrupt > [ 1.438975] xen-pciback 0000:0a:00.2: Signaling PME through PCIe PME > interrupt > [ 1.438979] xen-pciback 0000:0a:00.3: Signaling PME through PCIe PME > interrupt > [ 1.438982] xen-pciback 0000:0a:00.4: Signaling PME through PCIe PME > interrupt > [ 1.438986] xen-pciback 0000:0a:00.5: Signaling PME through PCIe PME > interrupt > [ 1.438989] xen-pciback 0000:0a:00.6: Signaling PME through PCIe PME > interrupt > [ 1.438993] xen-pciback 0000:0a:00.7: Signaling PME through PCIe PME > interrupt > [ 1.438998] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded > [ 1.439017] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt > [ 1.439021] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt > [ 1.439026] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded > [ 1.439043] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt > [ 1.439046] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt > [ 1.439052] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded > [ 1.439072] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt > [ 1.439077] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt > [ 1.439080] xen-pciback 0000:07:01.0: Signaling PME through PCIe PME > interrupt > [ 1.439084] xen-pciback 0000:07:01.1: Signaling PME through PCIe PME > interrupt > [ 1.439087] xen-pciback 0000:07:01.2: Signaling PME through PCIe PME > interrupt > [ 1.439098] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded > [ 1.439133] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt > [ 1.439137] xen-pciback 0000:05:00.0: Signaling PME through PCIe PME > interrupt > [ 1.439145] xen-pciback 0000:05:00.1: Signaling PME through PCIe PME > interrupt > [ 1.439151] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded > [ 1.439170] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt > [ 1.439174] xen-pciback 0000:04:00.0: Signaling PME through PCIe PME > interrupt > [ 1.439178] xen-pciback 0000:04:00.1: Signaling PME through PCIe PME > interrupt > [ 1.439182] xen-pciback 0000:04:00.2: Signaling PME through PCIe PME > interrupt > [ 1.439186] xen-pciback 0000:04:00.3: Signaling PME through PCIe PME > interrupt > [ 1.439189] xen-pciback 0000:04:00.4: Signaling PME through PCIe PME > interrupt > [ 1.439193] xen-pciback 0000:04:00.5: Signaling PME through PCIe PME > interrupt > [ 1.439197] xen-pciback 0000:04:00.6: Signaling PME through PCIe PME > interrupt > [ 1.439201] xen-pciback 0000:04:00.7: Signaling PME through PCIe PME > interrupt > [ 1.439207] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded > [ 1.439234] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt > [ 1.439241] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded > [ 1.439378] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 1.439531] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 1.439536] xen-pciback: pcistub_init_devices_late > [ 1.439539] xen-pciback 0000:03:06.0: initializing... > [ 1.439541] xen-pciback 0000:03:06.0: initializing config > [ 1.439543] xen-pciback 0000:03:06.0: initializing virtual configuration > space > [ 1.439546] xen-pciback 0000:03:06.0: added config field at offset 0x00 > [ 1.439549] xen-pciback 0000:03:06.0: added config field at offset 0x02 > [ 1.439551] xen-pciback 0000:03:06.0: added config field at offset 0x04 > [ 1.439554] xen-pciback 0000:03:06.0: added config field at offset 0x3c > [ 1.439556] xen-pciback 0000:03:06.0: added config field at offset 0x3d > [ 1.439558] xen-pciback 0000:03:06.0: added config field at offset 0x0c > [ 1.439560] xen-pciback 0000:03:06.0: added config field at offset 0x0d > [ 1.439563] xen-pciback 0000:03:06.0: added config field at offset 0x0f > [ 1.439565] xen-pciback 0000:03:06.0: added config field at offset 0x10 > [ 1.439567] xen-pciback 0000:03:06.0: added config field at offset 0x14 > [ 1.439570] xen-pciback 0000:03:06.0: added config field at offset 0x18 > [ 1.439572] xen-pciback 0000:03:06.0: added config field at offset 0x1c > [ 1.439574] xen-pciback 0000:03:06.0: added config field at offset 0x20 > [ 1.439577] xen-pciback 0000:03:06.0: added config field at offset 0x24 > [ 1.439579] xen-pciback 0000:03:06.0: added config field at offset 0x30 > [ 1.439598] xen-pciback 0000:03:06.0: Found capability 0x1 at 0xc0 > [ 1.439601] xen-pciback 0000:03:06.0: added config field at offset 0xc0 > [ 1.439603] xen-pciback 0000:03:06.0: added config field at offset 0xc2 > [ 1.439608] xen-pciback 0000:03:06.0: added config field at offset 0xc4 > [ 1.439610] xen-pciback 0000:03:06.0: added config field at offset 0xc6 > [ 1.439612] xen-pciback 0000:03:06.0: added config field at offset 0xc7 > [ 1.439627] xen-pciback 0000:03:06.0: enabling device > [ 1.439639] xen: registering gsi 22 triggering 0 polarity 1 > [ 1.439647] xen: --> pirq=22 -> irq=22 > [ 1.439705] xen-pciback 0000:03:06.0: PCI INT A -> GSI 22 (level, low) -> > IRQ 22 > [ 1.439710] xen-pciback 0000:03:06.0: reset device > [ 1.439718] xen-pciback 0000:03:06.0: PCI INT A disabled > [ 1.439723] xen-pciback 0000:04:00.7: initializing... > [ 1.439725] xen-pciback 0000:04:00.7: initializing config > [ 1.439726] xen-pciback 0000:04:00.7: initializing virtual configuration > space > [ 1.439729] xen-pciback 0000:04:00.7: added config field at offset 0x00 > [ 1.439731] xen-pciback 0000:04:00.7: added config field at offset 0x02 > [ 1.439732] xen-pciback 0000:04:00.7: added config field at offset 0x04 > [ 1.439734] xen-pciback 0000:04:00.7: added config field at offset 0x3c > [ 1.439736] xen-pciback 0000:04:00.7: added config field at offset 0x3d > [ 1.439738] xen-pciback 0000:04:00.7: added config field at offset 0x0c > [ 1.439740] xen-pciback 0000:04:00.7: added config field at offset 0x0d > [ 1.439742] xen-pciback 0000:04:00.7: added config field at offset 0x0f > [ 1.439744] xen-pciback 0000:04:00.7: added config field at offset 0x10 > [ 1.439746] xen-pciback 0000:04:00.7: added config field at offset 0x14 > [ 1.439748] xen-pciback 0000:04:00.7: added config field at offset 0x18 > [ 1.439750] xen-pciback 0000:04:00.7: added config field at offset 0x1c > [ 1.439752] xen-pciback 0000:04:00.7: added config field at offset 0x20 > [ 1.439754] xen-pciback 0000:04:00.7: added config field at offset 0x24 > [ 1.439756] xen-pciback 0000:04:00.7: added config field at offset 0x30 > [ 1.439782] xen-pciback 0000:04:00.7: Found capability 0x1 at 0x78 > [ 1.439784] xen-pciback 0000:04:00.7: added config field at offset 0x78 > [ 1.439786] xen-pciback 0000:04:00.7: added config field at offset 0x7a > [ 1.439790] xen-pciback 0000:04:00.7: added config field at offset 0x7c > [ 1.439792] xen-pciback 0000:04:00.7: added config field at offset 0x7e > [ 1.439794] xen-pciback 0000:04:00.7: added config field at offset 0x7f > [ 1.439796] xen-pciback 0000:04:00.7: enabling device > [ 1.439802] xen: registering gsi 43 triggering 0 polarity 1 > [ 1.439808] xen: --> pirq=43 -> irq=43 > [ 1.439822] xen-pciback 0000:04:00.7: PCI INT D -> GSI 43 (level, low) -> > IRQ 43 > [ 1.439826] xen-pciback 0000:04:00.7: reset device > [ 1.439833] xen-pciback 0000:04:00.7: PCI INT D disabled > [ 1.439838] xen-pciback 0000:04:00.6: initializing... > [ 1.439840] xen-pciback 0000:04:00.6: initializing config > [ 1.439842] xen-pciback 0000:04:00.6: initializing virtual configuration > space > [ 1.439844] xen-pciback 0000:04:00.6: added config field at offset 0x00 > [ 1.439846] xen-pciback 0000:04:00.6: added config field at offset 0x02 > [ 1.439848] xen-pciback 0000:04:00.6: added config field at offset 0x04 > [ 1.439850] xen-pciback 0000:04:00.6: added config field at offset 0x3c > [ 1.439851] xen-pciback 0000:04:00.6: added config field at offset 0x3d > [ 1.439853] xen-pciback 0000:04:00.6: added config field at offset 0x0c > [ 1.439855] xen-pciback 0000:04:00.6: added config field at offset 0x0d > [ 1.439857] xen-pciback 0000:04:00.6: added config field at offset 0x0f > [ 1.439859] xen-pciback 0000:04:00.6: added config field at offset 0x10 > [ 1.439861] xen-pciback 0000:04:00.6: added config field at offset 0x14 > [ 1.439863] xen-pciback 0000:04:00.6: added config field at offset 0x18 > [ 1.439865] xen-pciback 0000:04:00.6: added config field at offset 0x1c > [ 1.439867] xen-pciback 0000:04:00.6: added config field at offset 0x20 > [ 1.439869] xen-pciback 0000:04:00.6: added config field at offset 0x24 > [ 1.439871] xen-pciback 0000:04:00.6: added config field at offset 0x30 > [ 1.439897] xen-pciback 0000:04:00.6: Found capability 0x1 at 0x78 > [ 1.439899] xen-pciback 0000:04:00.6: added config field at offset 0x78 > [ 1.439901] xen-pciback 0000:04:00.6: added config field at offset 0x7a > [ 1.439905] xen-pciback 0000:04:00.6: added config field at offset 0x7c > [ 1.439907] xen-pciback 0000:04:00.6: added config field at offset 0x7e > [ 1.439909] xen-pciback 0000:04:00.6: added config field at offset 0x7f > [ 1.439911] xen-pciback 0000:04:00.6: enabling device > [ 1.439917] xen: registering gsi 43 triggering 0 polarity 1 > [ 1.439920] xen_map_pirq_gsi: returning irq 43 for gsi 43 > [ 1.439923] xen: --> pirq=43 -> irq=43 > [ 1.439924] Already setup the GSI :43 > [ 1.439927] xen-pciback 0000:04:00.6: PCI INT D -> GSI 43 (level, low) -> > IRQ 43 > [ 1.439931] xen-pciback 0000:04:00.6: reset device > [ 1.439937] xen-pciback 0000:04:00.6: PCI INT D disabled > [ 1.439942] xen-pciback 0000:04:00.5: initializing... > [ 1.439943] xen-pciback 0000:04:00.5: initializing config > [ 1.439945] xen-pciback 0000:04:00.5: initializing virtual configuration > space > [ 1.439947] xen-pciback 0000:04:00.5: added config field at offset 0x00 > [ 1.439949] xen-pciback 0000:04:00.5: added config field at offset 0x02 > [ 1.439951] xen-pciback 0000:04:00.5: added config field at offset 0x04 > [ 1.439953] xen-pciback 0000:04:00.5: added config field at offset 0x3c > [ 1.439955] xen-pciback 0000:04:00.5: added config field at offset 0x3d > [ 1.439957] xen-pciback 0000:04:00.5: added config field at offset 0x0c > [ 1.439959] xen-pciback 0000:04:00.5: added config field at offset 0x0d > [ 1.439960] xen-pciback 0000:04:00.5: added config field at offset 0x0f > [ 1.439962] xen-pciback 0000:04:00.5: added config field at offset 0x10 > [ 1.439964] xen-pciback 0000:04:00.5: added config field at offset 0x14 > [ 1.439966] xen-pciback 0000:04:00.5: added config field at offset 0x18 > [ 1.439968] xen-pciback 0000:04:00.5: added config field at offset 0x1c > [ 1.439970] xen-pciback 0000:04:00.5: added config field at offset 0x20 > [ 1.439972] xen-pciback 0000:04:00.5: added config field at offset 0x24 > [ 1.439974] xen-pciback 0000:04:00.5: added config field at offset 0x30 > [ 1.440000] xen-pciback 0000:04:00.5: Found capability 0x1 at 0x78 > [ 1.440002] xen-pciback 0000:04:00.5: added config field at offset 0x78 > [ 1.440004] xen-pciback 0000:04:00.5: added config field at offset 0x7a > [ 1.440008] xen-pciback 0000:04:00.5: added config field at offset 0x7c > [ 1.440010] xen-pciback 0000:04:00.5: added config field at offset 0x7e > [ 1.440014] xen-pciback 0000:04:00.5: added config field at offset 0x7f > [ 1.440016] xen-pciback 0000:04:00.5: enabling device > [ 1.440022] xen: registering gsi 42 triggering 0 polarity 1 > [ 1.440027] xen: --> pirq=42 -> irq=42 > [ 1.440041] xen-pciback 0000:04:00.5: PCI INT C -> GSI 42 (level, low) -> > IRQ 42 > [ 1.440045] xen-pciback 0000:04:00.5: reset device > [ 1.440056] xen-pciback 0000:04:00.5: PCI INT C disabled > [ 1.440062] xen-pciback 0000:04:00.4: initializing... > [ 1.440064] xen-pciback 0000:04:00.4: initializing config > [ 1.440066] xen-pciback 0000:04:00.4: initializing virtual configuration > space > [ 1.440068] xen-pciback 0000:04:00.4: added config field at offset 0x00 > [ 1.440070] xen-pciback 0000:04:00.4: added config field at offset 0x02 > [ 1.440072] xen-pciback 0000:04:00.4: added config field at offset 0x04 > [ 1.440074] xen-pciback 0000:04:00.4: added config field at offset 0x3c > [ 1.440076] xen-pciback 0000:04:00.4: added config field at offset 0x3d > [ 1.440077] xen-pciback 0000:04:00.4: added config field at offset 0x0c > [ 1.440079] xen-pciback 0000:04:00.4: added config field at offset 0x0d > [ 1.440081] xen-pciback 0000:04:00.4: added config field at offset 0x0f > [ 1.440083] xen-pciback 0000:04:00.4: added config field at offset 0x10 > [ 1.440085] xen-pciback 0000:04:00.4: added config field at offset 0x14 > [ 1.440087] xen-pciback 0000:04:00.4: added config field at offset 0x18 > [ 1.440089] xen-pciback 0000:04:00.4: added config field at offset 0x1c > [ 1.440091] xen-pciback 0000:04:00.4: added config field at offset 0x20 > [ 1.440093] xen-pciback 0000:04:00.4: added config field at offset 0x24 > [ 1.440095] xen-pciback 0000:04:00.4: added config field at offset 0x30 > [ 1.440120] xen-pciback 0000:04:00.4: Found capability 0x1 at 0x78 > [ 1.440122] xen-pciback 0000:04:00.4: added config field at offset 0x78 > [ 1.440124] xen-pciback 0000:04:00.4: added config field at offset 0x7a > [ 1.440127] xen-pciback 0000:04:00.4: added config field at offset 0x7c > [ 1.440129] xen-pciback 0000:04:00.4: added config field at offset 0x7e > [ 1.440131] xen-pciback 0000:04:00.4: added config field at offset 0x7f > [ 1.440133] xen-pciback 0000:04:00.4: enabling device > [ 1.440138] xen: registering gsi 42 triggering 0 polarity 1 > [ 1.440159] xen_map_pirq_gsi: returning irq 42 for gsi 42 > [ 1.440161] xen: --> pirq=42 -> irq=42 > [ 1.440163] Already setup the GSI :42 > [ 1.440166] xen-pciback 0000:04:00.4: PCI INT C -> GSI 42 (level, low) -> > IRQ 42 > [ 1.440169] xen-pciback 0000:04:00.4: reset device > [ 1.440176] xen-pciback 0000:04:00.4: PCI INT C disabled > [ 1.440181] xen-pciback 0000:04:00.3: initializing... > [ 1.440183] xen-pciback 0000:04:00.3: initializing config > [ 1.440184] xen-pciback 0000:04:00.3: initializing virtual configuration > space > [ 1.440192] xen-pciback 0000:04:00.3: added config field at offset 0x00 > [ 1.440194] xen-pciback 0000:04:00.3: added config field at offset 0x02 > [ 1.440196] xen-pciback 0000:04:00.3: added config field at offset 0x04 > [ 1.440198] xen-pciback 0000:04:00.3: added config field at offset 0x3c > [ 1.440200] xen-pciback 0000:04:00.3: added config field at offset 0x3d > [ 1.440202] xen-pciback 0000:04:00.3: added config field at offset 0x0c > [ 1.440204] xen-pciback 0000:04:00.3: added config field at offset 0x0d > [ 1.440206] xen-pciback 0000:04:00.3: added config field at offset 0x0f > [ 1.440208] xen-pciback 0000:04:00.3: added config field at offset 0x10 > [ 1.440210] xen-pciback 0000:04:00.3: added config field at offset 0x14 > [ 1.440212] xen-pciback 0000:04:00.3: added config field at offset 0x18 > [ 1.440214] xen-pciback 0000:04:00.3: added config field at offset 0x1c > [ 1.440216] xen-pciback 0000:04:00.3: added config field at offset 0x20 > [ 1.440218] xen-pciback 0000:04:00.3: added config field at offset 0x24 > [ 1.440220] xen-pciback 0000:04:00.3: added config field at offset 0x30 > [ 1.440247] xen-pciback 0000:04:00.3: Found capability 0x1 at 0x78 > [ 1.440248] xen-pciback 0000:04:00.3: added config field at offset 0x78 > [ 1.440250] xen-pciback 0000:04:00.3: added config field at offset 0x7a > [ 1.440254] xen-pciback 0000:04:00.3: added config field at offset 0x7c > [ 1.440256] xen-pciback 0000:04:00.3: added config field at offset 0x7e > [ 1.440258] xen-pciback 0000:04:00.3: added config field at offset 0x7f > [ 1.440260] xen-pciback 0000:04:00.3: enabling device > [ 1.440266] xen: registering gsi 41 triggering 0 polarity 1 > [ 1.440271] xen: --> pirq=41 -> irq=41 > [ 1.440285] xen-pciback 0000:04:00.3: PCI INT B -> GSI 41 (level, low) -> > IRQ 41 > [ 1.440289] xen-pciback 0000:04:00.3: reset device > [ 1.440296] xen-pciback 0000:04:00.3: PCI INT B disabled > [ 1.440301] xen-pciback 0000:04:00.2: initializing... > [ 1.440303] xen-pciback 0000:04:00.2: initializing config > [ 1.440304] xen-pciback 0000:04:00.2: initializing virtual configuration > space > [ 1.440307] xen-pciback 0000:04:00.2: added config field at offset 0x00 > [ 1.440309] xen-pciback 0000:04:00.2: added config field at offset 0x02 > [ 1.440310] xen-pciback 0000:04:00.2: added config field at offset 0x04 > [ 1.440312] xen-pciback 0000:04:00.2: added config field at offset 0x3c > [ 1.440314] xen-pciback 0000:04:00.2: added config field at offset 0x3d > [ 1.440316] xen-pciback 0000:04:00.2: added config field at offset 0x0c > [ 1.440318] xen-pciback 0000:04:00.2: added config field at offset 0x0d > [ 1.440320] xen-pciback 0000:04:00.2: added config field at offset 0x0f > [ 1.440322] xen-pciback 0000:04:00.2: added config field at offset 0x10 > [ 1.440324] xen-pciback 0000:04:00.2: added config field at offset 0x14 > [ 1.440326] xen-pciback 0000:04:00.2: added config field at offset 0x18 > [ 1.440328] xen-pciback 0000:04:00.2: added config field at offset 0x1c > [ 1.440330] xen-pciback 0000:04:00.2: added config field at offset 0x20 > [ 1.440332] xen-pciback 0000:04:00.2: added config field at offset 0x24 > [ 1.440334] xen-pciback 0000:04:00.2: added config field at offset 0x30 > [ 1.440360] xen-pciback 0000:04:00.2: Found capability 0x1 at 0x78 > [ 1.440362] xen-pciback 0000:04:00.2: added config field at offset 0x78 > [ 1.440364] xen-pciback 0000:04:00.2: added config field at offset 0x7a > [ 1.440368] xen-pciback 0000:04:00.2: added config field at offset 0x7c > [ 1.440372] xen-pciback 0000:04:00.2: added config field at offset 0x7e > [ 1.440374] xen-pciback 0000:04:00.2: added config field at offset 0x7f > [ 1.440376] xen-pciback 0000:04:00.2: enabling device > [ 1.440382] xen: registering gsi 41 triggering 0 polarity 1 > [ 1.440385] xen_map_pirq_gsi: returning irq 41 for gsi 41 > [ 1.440388] xen: --> pirq=41 -> irq=41 > [ 1.440389] Already setup the GSI :41 > [ 1.440392] xen-pciback 0000:04:00.2: PCI INT B -> GSI 41 (level, low) -> > IRQ 41 > [ 1.440395] xen-pciback 0000:04:00.2: reset device > [ 1.440401] xen-pciback 0000:04:00.2: PCI INT B disabled > [ 1.440406] xen-pciback 0000:04:00.1: initializing... > [ 1.440408] xen-pciback 0000:04:00.1: initializing config > [ 1.440410] xen-pciback 0000:04:00.1: initializing virtual configuration > space > [ 1.440412] xen-pciback 0000:04:00.1: added config field at offset 0x00 > [ 1.440414] xen-pciback 0000:04:00.1: added config field at offset 0x02 > [ 1.440415] xen-pciback 0000:04:00.1: added config field at offset 0x04 > [ 1.440417] xen-pciback 0000:04:00.1: added config field at offset 0x3c > [ 1.440419] xen-pciback 0000:04:00.1: added config field at offset 0x3d > [ 1.440421] xen-pciback 0000:04:00.1: added config field at offset 0x0c > [ 1.440423] xen-pciback 0000:04:00.1: added config field at offset 0x0d > [ 1.440425] xen-pciback 0000:04:00.1: added config field at offset 0x0f > [ 1.440427] xen-pciback 0000:04:00.1: added config field at offset 0x10 > [ 1.440429] xen-pciback 0000:04:00.1: added config field at offset 0x14 > [ 1.440431] xen-pciback 0000:04:00.1: added config field at offset 0x18 > [ 1.440433] xen-pciback 0000:04:00.1: added config field at offset 0x1c > [ 1.440435] xen-pciback 0000:04:00.1: added config field at offset 0x20 > [ 1.440437] xen-pciback 0000:04:00.1: added config field at offset 0x24 > [ 1.440439] xen-pciback 0000:04:00.1: added config field at offset 0x30 > [ 1.440465] xen-pciback 0000:04:00.1: Found capability 0x1 at 0x78 > [ 1.440467] xen-pciback 0000:04:00.1: added config field at offset 0x78 > [ 1.440469] xen-pciback 0000:04:00.1: added config field at offset 0x7a > [ 1.440473] xen-pciback 0000:04:00.1: added config field at offset 0x7c > [ 1.440475] xen-pciback 0000:04:00.1: added config field at offset 0x7e > [ 1.440477] xen-pciback 0000:04:00.1: added config field at offset 0x7f > [ 1.440478] xen-pciback 0000:04:00.1: enabling device > [ 1.440484] xen: registering gsi 40 triggering 0 polarity 1 > [ 1.440489] xen: --> pirq=40 -> irq=40 > [ 1.440503] xen-pciback 0000:04:00.1: PCI INT A -> GSI 40 (level, low) -> > IRQ 40 > [ 1.440507] xen-pciback 0000:04:00.1: reset device > [ 1.440514] xen-pciback 0000:04:00.1: PCI INT A disabled > [ 1.440519] xen-pciback 0000:04:00.0: initializing... > [ 1.440520] xen-pciback 0000:04:00.0: initializing config > [ 1.440522] xen-pciback 0000:04:00.0: initializing virtual configuration > space > [ 1.440524] xen-pciback 0000:04:00.0: added config field at offset 0x00 > [ 1.440526] xen-pciback 0000:04:00.0: added config field at offset 0x02 > [ 1.440528] xen-pciback 0000:04:00.0: added config field at offset 0x04 > [ 1.440530] xen-pciback 0000:04:00.0: added config field at offset 0x3c > [ 1.440532] xen-pciback 0000:04:00.0: added config field at offset 0x3d > [ 1.440534] xen-pciback 0000:04:00.0: added config field at offset 0x0c > [ 1.440536] xen-pciback 0000:04:00.0: added config field at offset 0x0d > [ 1.440538] xen-pciback 0000:04:00.0: added config field at offset 0x0f > [ 1.440540] xen-pciback 0000:04:00.0: added config field at offset 0x10 > [ 1.440542] xen-pciback 0000:04:00.0: added config field at offset 0x14 > [ 1.440544] xen-pciback 0000:04:00.0: added config field at offset 0x18 > [ 1.440546] xen-pciback 0000:04:00.0: added config field at offset 0x1c > [ 1.440548] xen-pciback 0000:04:00.0: added config field at offset 0x20 > [ 1.440549] xen-pciback 0000:04:00.0: added config field at offset 0x24 > [ 1.440551] xen-pciback 0000:04:00.0: added config field at offset 0x30 > [ 1.440578] xen-pciback 0000:04:00.0: Found capability 0x1 at 0x78 > [ 1.440580] xen-pciback 0000:04:00.0: added config field at offset 0x78 > [ 1.440582] xen-pciback 0000:04:00.0: added config field at offset 0x7a > [ 1.440586] xen-pciback 0000:04:00.0: added config field at offset 0x7c > [ 1.440588] xen-pciback 0000:04:00.0: added config field at offset 0x7e > [ 1.440590] xen-pciback 0000:04:00.0: added config field at offset 0x7f > [ 1.440591] xen-pciback 0000:04:00.0: enabling device > [ 1.440597] xen: registering gsi 40 triggering 0 polarity 1 > [ 1.440600] xen_map_pirq_gsi: returning irq 40 for gsi 40 > [ 1.440603] xen: --> pirq=40 -> irq=40 > [ 1.440604] Already setup the GSI :40 > [ 1.440607] xen-pciback 0000:04:00.0: PCI INT A -> GSI 40 (level, low) -> > IRQ 40 > [ 1.440610] xen-pciback 0000:04:00.0: reset device > [ 1.440616] xen-pciback 0000:04:00.0: PCI INT A disabled > [ 1.440621] xen-pciback 0000:05:00.1: initializing... > [ 1.440623] xen-pciback 0000:05:00.1: initializing config > [ 1.440624] xen-pciback 0000:05:00.1: initializing virtual configuration > space > [ 1.440626] xen-pciback 0000:05:00.1: added config field at offset 0x00 > [ 1.440628] xen-pciback 0000:05:00.1: added config field at offset 0x02 > [ 1.440630] xen-pciback 0000:05:00.1: added config field at offset 0x04 > [ 1.440632] xen-pciback 0000:05:00.1: added config field at offset 0x3c > [ 1.440634] xen-pciback 0000:05:00.1: added config field at offset 0x3d > [ 1.440636] xen-pciback 0000:05:00.1: added config field at offset 0x0c > [ 1.440638] xen-pciback 0000:05:00.1: added config field at offset 0x0d > [ 1.440640] xen-pciback 0000:05:00.1: added config field at offset 0x0f > [ 1.440642] xen-pciback 0000:05:00.1: added config field at offset 0x10 > [ 1.440644] xen-pciback 0000:05:00.1: added config field at offset 0x14 > [ 1.440646] xen-pciback 0000:05:00.1: added config field at offset 0x18 > [ 1.440648] xen-pciback 0000:05:00.1: added config field at offset 0x1c > [ 1.440650] xen-pciback 0000:05:00.1: added config field at offset 0x20 > [ 1.440652] xen-pciback 0000:05:00.1: added config field at offset 0x24 > [ 1.440654] xen-pciback 0000:05:00.1: added config field at offset 0x30 > [ 1.440672] xen-pciback 0000:05:00.1: Found capability 0x1 at 0x50 > [ 1.440674] xen-pciback 0000:05:00.1: added config field at offset 0x50 > [ 1.440676] xen-pciback 0000:05:00.1: added config field at offset 0x52 > [ 1.440679] xen-pciback 0000:05:00.1: added config field at offset 0x54 > [ 1.440683] xen-pciback 0000:05:00.1: added config field at offset 0x56 > [ 1.440685] xen-pciback 0000:05:00.1: added config field at offset 0x57 > [ 1.440687] xen-pciback 0000:05:00.1: enabling device > [ 1.440692] xen: registering gsi 33 triggering 0 polarity 1 > [ 1.440698] xen: --> pirq=33 -> irq=33 > [ 1.440711] xen-pciback 0000:05:00.1: PCI INT B -> GSI 33 (level, low) -> > IRQ 33 > [ 1.440715] xen-pciback 0000:05:00.1: reset device > [ 1.440721] xen-pciback 0000:05:00.1: PCI INT B disabled > [ 1.440726] xen-pciback 0000:05:00.0: initializing... > [ 1.440728] xen-pciback 0000:05:00.0: initializing config > [ 1.440730] xen-pciback 0000:05:00.0: initializing virtual configuration > space > [ 1.440732] xen-pciback 0000:05:00.0: added config field at offset 0x00 > [ 1.440734] xen-pciback 0000:05:00.0: added config field at offset 0x02 > [ 1.440735] xen-pciback 0000:05:00.0: added config field at offset 0x04 > [ 1.440737] xen-pciback 0000:05:00.0: added config field at offset 0x3c > [ 1.440739] xen-pciback 0000:05:00.0: added config field at offset 0x3d > [ 1.440741] xen-pciback 0000:05:00.0: added config field at offset 0x0c > [ 1.440743] xen-pciback 0000:05:00.0: added config field at offset 0x0d > [ 1.440745] xen-pciback 0000:05:00.0: added config field at offset 0x0f > [ 1.440747] xen-pciback 0000:05:00.0: added config field at offset 0x10 > [ 1.440749] xen-pciback 0000:05:00.0: added config field at offset 0x14 > [ 1.440751] xen-pciback 0000:05:00.0: added config field at offset 0x18 > [ 1.440753] xen-pciback 0000:05:00.0: added config field at offset 0x1c > [ 1.440755] xen-pciback 0000:05:00.0: added config field at offset 0x20 > [ 1.440757] xen-pciback 0000:05:00.0: added config field at offset 0x24 > [ 1.440759] xen-pciback 0000:05:00.0: added config field at offset 0x30 > [ 1.440777] xen-pciback 0000:05:00.0: Found capability 0x1 at 0x50 > [ 1.440779] xen-pciback 0000:05:00.0: added config field at offset 0x50 > [ 1.440781] xen-pciback 0000:05:00.0: added config field at offset 0x52 > [ 1.440785] xen-pciback 0000:05:00.0: added config field at offset 0x54 > [ 1.440787] xen-pciback 0000:05:00.0: added config field at offset 0x56 > [ 1.440788] xen-pciback 0000:05:00.0: added config field at offset 0x57 > [ 1.440790] xen-pciback 0000:05:00.0: enabling device > [ 1.440796] xen-pciback 0000:05:00.0: enabling device (0000 -> 0003) > [ 1.440800] xen: registering gsi 32 triggering 0 polarity 1 > [ 1.440806] xen: --> pirq=32 -> irq=32 > [ 1.440820] xen-pciback 0000:05:00.0: PCI INT A -> GSI 32 (level, low) -> > IRQ 32 > [ 1.440824] xen-pciback 0000:05:00.0: reset device > [ 1.440828] xen-pciback 0000:05:00.0: PCI INT A disabled > [ 1.440833] xen-pciback 0000:07:01.2: initializing... > [ 1.440835] xen-pciback 0000:07:01.2: initializing config > [ 1.440836] xen-pciback 0000:07:01.2: initializing virtual configuration > space > [ 1.440838] xen-pciback 0000:07:01.2: added config field at offset 0x00 > [ 1.440840] xen-pciback 0000:07:01.2: added config field at offset 0x02 > [ 1.440842] xen-pciback 0000:07:01.2: added config field at offset 0x04 > [ 1.440844] xen-pciback 0000:07:01.2: added config field at offset 0x3c > [ 1.440846] xen-pciback 0000:07:01.2: added config field at offset 0x3d > [ 1.440848] xen-pciback 0000:07:01.2: added config field at offset 0x0c > [ 1.440850] xen-pciback 0000:07:01.2: added config field at offset 0x0d > [ 1.440852] xen-pciback 0000:07:01.2: added config field at offset 0x0f > [ 1.440854] xen-pciback 0000:07:01.2: added config field at offset 0x10 > [ 1.440856] xen-pciback 0000:07:01.2: added config field at offset 0x14 > [ 1.440858] xen-pciback 0000:07:01.2: added config field at offset 0x18 > [ 1.440860] xen-pciback 0000:07:01.2: added config field at offset 0x1c > [ 1.440862] xen-pciback 0000:07:01.2: added config field at offset 0x20 > [ 1.440864] xen-pciback 0000:07:01.2: added config field at offset 0x24 > [ 1.440865] xen-pciback 0000:07:01.2: added config field at offset 0x30 > [ 1.440882] xen-pciback 0000:07:01.2: Found capability 0x1 at 0x40 > [ 1.440884] xen-pciback 0000:07:01.2: added config field at offset 0x40 > [ 1.440886] xen-pciback 0000:07:01.2: added config field at offset 0x42 > [ 1.440890] xen-pciback 0000:07:01.2: added config field at offset 0x44 > [ 1.440892] xen-pciback 0000:07:01.2: added config field at offset 0x46 > [ 1.440894] xen-pciback 0000:07:01.2: added config field at offset 0x47 > [ 1.440896] xen-pciback 0000:07:01.2: enabling device > [ 1.440910] xen-pciback 0000:07:01.2: enabling device (0114 -> 0116) > [ 1.440916] xen: registering gsi 46 triggering 0 polarity 1 > [ 1.440921] xen: --> pirq=46 -> irq=46 > [ 1.440935] xen-pciback 0000:07:01.2: PCI INT C -> GSI 46 (level, low) -> > IRQ 46 > [ 1.440939] xen-pciback 0000:07:01.2: reset device > [ 1.440946] xen-pciback 0000:07:01.2: PCI INT C disabled > [ 1.440951] xen-pciback 0000:07:01.1: initializing... > [ 1.440953] xen-pciback 0000:07:01.1: initializing config > [ 1.440955] xen-pciback 0000:07:01.1: initializing virtual configuration > space > [ 1.440957] xen-pciback 0000:07:01.1: added config field at offset 0x00 > [ 1.440966] xen-pciback 0000:07:01.1: added config field at offset 0x02 > [ 1.440968] xen-pciback 0000:07:01.1: added config field at offset 0x04 > [ 1.440970] xen-pciback 0000:07:01.1: added config field at offset 0x3c > [ 1.440972] xen-pciback 0000:07:01.1: added config field at offset 0x3d > [ 1.440974] xen-pciback 0000:07:01.1: added config field at offset 0x0c > [ 1.440976] xen-pciback 0000:07:01.1: added config field at offset 0x0d > [ 1.440978] xen-pciback 0000:07:01.1: added config field at offset 0x0f > [ 1.440980] xen-pciback 0000:07:01.1: added config field at offset 0x10 > [ 1.440982] xen-pciback 0000:07:01.1: added config field at offset 0x14 > [ 1.440984] xen-pciback 0000:07:01.1: added config field at offset 0x18 > [ 1.440986] xen-pciback 0000:07:01.1: added config field at offset 0x1c > [ 1.440988] xen-pciback 0000:07:01.1: added config field at offset 0x20 > [ 1.440990] xen-pciback 0000:07:01.1: added config field at offset 0x24 > [ 1.440992] xen-pciback 0000:07:01.1: added config field at offset 0x30 > [ 1.441009] xen-pciback 0000:07:01.1: Found capability 0x1 at 0x40 > [ 1.441011] xen-pciback 0000:07:01.1: added config field at offset 0x40 > [ 1.441015] xen-pciback 0000:07:01.1: added config field at offset 0x42 > [ 1.441019] xen-pciback 0000:07:01.1: added config field at offset 0x44 > [ 1.441021] xen-pciback 0000:07:01.1: added config field at offset 0x46 > [ 1.441023] xen-pciback 0000:07:01.1: added config field at offset 0x47 > [ 1.441025] xen-pciback 0000:07:01.1: enabling device > [ 1.441031] xen-pciback 0000:07:01.1: enabling device (0114 -> 0116) > [ 1.441037] xen: registering gsi 45 triggering 0 polarity 1 > [ 1.441042] xen: --> pirq=45 -> irq=45 > [ 1.441091] xen-pciback 0000:07:01.1: PCI INT B -> GSI 45 (level, low) -> > IRQ 45 > [ 1.441095] xen-pciback 0000:07:01.1: reset device > [ 1.441102] xen-pciback 0000:07:01.1: PCI INT B disabled > [ 1.441107] xen-pciback 0000:07:01.0: initializing... > [ 1.441109] xen-pciback 0000:07:01.0: initializing config > [ 1.441111] xen-pciback 0000:07:01.0: initializing virtual configuration > space > [ 1.441113] xen-pciback 0000:07:01.0: added config field at offset 0x00 > [ 1.441115] xen-pciback 0000:07:01.0: added config field at offset 0x02 > [ 1.441117] xen-pciback 0000:07:01.0: added config field at offset 0x04 > [ 1.441119] xen-pciback 0000:07:01.0: added config field at offset 0x3c > [ 1.441121] xen-pciback 0000:07:01.0: added config field at offset 0x3d > [ 1.441123] xen-pciback 0000:07:01.0: added config field at offset 0x0c > [ 1.441125] xen-pciback 0000:07:01.0: added config field at offset 0x0d > [ 1.441127] xen-pciback 0000:07:01.0: added config field at offset 0x0f > [ 1.441129] xen-pciback 0000:07:01.0: added config field at offset 0x10 > [ 1.441131] xen-pciback 0000:07:01.0: added config field at offset 0x14 > [ 1.441132] xen-pciback 0000:07:01.0: added config field at offset 0x18 > [ 1.441134] xen-pciback 0000:07:01.0: added config field at offset 0x1c > [ 1.441136] xen-pciback 0000:07:01.0: added config field at offset 0x20 > [ 1.441138] xen-pciback 0000:07:01.0: added config field at offset 0x24 > [ 1.441140] xen-pciback 0000:07:01.0: added config field at offset 0x30 > [ 1.441157] xen-pciback 0000:07:01.0: Found capability 0x1 at 0x40 > [ 1.441159] xen-pciback 0000:07:01.0: added config field at offset 0x40 > [ 1.441161] xen-pciback 0000:07:01.0: added config field at offset 0x42 > [ 1.441165] xen-pciback 0000:07:01.0: added config field at offset 0x44 > [ 1.441167] xen-pciback 0000:07:01.0: added config field at offset 0x46 > [ 1.441169] xen-pciback 0000:07:01.0: added config field at offset 0x47 > [ 1.441171] xen-pciback 0000:07:01.0: enabling device > [ 1.441177] xen-pciback 0000:07:01.0: enabling device (0114 -> 0116) > [ 1.441182] xen: registering gsi 44 triggering 0 polarity 1 > [ 1.441188] xen: --> pirq=44 -> irq=44 > [ 1.441201] xen-pciback 0000:07:01.0: PCI INT A -> GSI 44 (level, low) -> > IRQ 44 > [ 1.441205] xen-pciback 0000:07:01.0: reset device > [ 1.441212] xen-pciback 0000:07:01.0: PCI INT A disabled > [ 1.441217] xen-pciback 0000:0a:00.7: initializing... > [ 1.441227] xen-pciback 0000:0a:00.7: initializing config > [ 1.441228] xen-pciback 0000:0a:00.7: initializing virtual configuration > space > [ 1.441231] xen-pciback 0000:0a:00.7: added config field at offset 0x00 > [ 1.441232] xen-pciback 0000:0a:00.7: added config field at offset 0x02 > [ 1.441234] xen-pciback 0000:0a:00.7: added config field at offset 0x04 > [ 1.441236] xen-pciback 0000:0a:00.7: added config field at offset 0x3c > [ 1.441238] xen-pciback 0000:0a:00.7: added config field at offset 0x3d > [ 1.441240] xen-pciback 0000:0a:00.7: added config field at offset 0x0c > [ 1.441242] xen-pciback 0000:0a:00.7: added config field at offset 0x0d > [ 1.441244] xen-pciback 0000:0a:00.7: added config field at offset 0x0f > [ 1.441248] xen-pciback 0000:0a:00.7: added config field at offset 0x10 > [ 1.441250] xen-pciback 0000:0a:00.7: added config field at offset 0x14 > [ 1.441252] xen-pciback 0000:0a:00.7: added config field at offset 0x18 > [ 1.441254] xen-pciback 0000:0a:00.7: added config field at offset 0x1c > [ 1.441256] xen-pciback 0000:0a:00.7: added config field at offset 0x20 > [ 1.441258] xen-pciback 0000:0a:00.7: added config field at offset 0x24 > [ 1.441260] xen-pciback 0000:0a:00.7: added config field at offset 0x30 > [ 1.441287] xen-pciback 0000:0a:00.7: Found capability 0x1 at 0x78 > [ 1.441289] xen-pciback 0000:0a:00.7: added config field at offset 0x78 > [ 1.441291] xen-pciback 0000:0a:00.7: added config field at offset 0x7a > [ 1.441295] xen-pciback 0000:0a:00.7: added config field at offset 0x7c > [ 1.441297] xen-pciback 0000:0a:00.7: added config field at offset 0x7e > [ 1.441299] xen-pciback 0000:0a:00.7: added config field at offset 0x7f > [ 1.441301] xen-pciback 0000:0a:00.7: enabling device > [ 1.441314] xen: registering gsi 31 triggering 0 polarity 1 > [ 1.441319] xen: --> pirq=31 -> irq=31 > [ 1.441332] xen-pciback 0000:0a:00.7: PCI INT D -> GSI 31 (level, low) -> > IRQ 31 > [ 1.441336] xen-pciback 0000:0a:00.7: reset device > [ 1.441343] xen-pciback 0000:0a:00.7: PCI INT D disabled > [ 1.441349] xen-pciback 0000:0a:00.6: initializing... > [ 1.441350] xen-pciback 0000:0a:00.6: initializing config > [ 1.441352] xen-pciback 0000:0a:00.6: initializing virtual configuration > space > [ 1.441354] xen-pciback 0000:0a:00.6: added config field at offset 0x00 > [ 1.441356] xen-pciback 0000:0a:00.6: added config field at offset 0x02 > [ 1.441358] xen-pciback 0000:0a:00.6: added config field at offset 0x04 > [ 1.441360] xen-pciback 0000:0a:00.6: added config field at offset 0x3c > [ 1.441362] xen-pciback 0000:0a:00.6: added config field at offset 0x3d > [ 1.441364] xen-pciback 0000:0a:00.6: added config field at offset 0x0c > [ 1.441366] xen-pciback 0000:0a:00.6: added config field at offset 0x0d > [ 1.441368] xen-pciback 0000:0a:00.6: added config field at offset 0x0f > [ 1.441370] xen-pciback 0000:0a:00.6: added config field at offset 0x10 > [ 1.441372] xen-pciback 0000:0a:00.6: added config field at offset 0x14 > [ 1.441374] xen-pciback 0000:0a:00.6: added config field at offset 0x18 > [ 1.441376] xen-pciback 0000:0a:00.6: added config field at offset 0x1c > [ 1.441378] xen-pciback 0000:0a:00.6: added config field at offset 0x20 > [ 1.441380] xen-pciback 0000:0a:00.6: added config field at offset 0x24 > [ 1.441383] xen-pciback 0000:0a:00.6: added config field at offset 0x30 > [ 1.441418] xen-pciback 0000:0a:00.6: Found capability 0x1 at 0x78 > [ 1.441420] xen-pciback 0000:0a:00.6: added config field at offset 0x78 > [ 1.441422] xen-pciback 0000:0a:00.6: added config field at offset 0x7a > [ 1.441426] xen-pciback 0000:0a:00.6: added config field at offset 0x7c > [ 1.441428] xen-pciback 0000:0a:00.6: added config field at offset 0x7e > [ 1.441429] xen-pciback 0000:0a:00.6: added config field at offset 0x7f > [ 1.441431] xen-pciback 0000:0a:00.6: enabling device > [ 1.441438] xen: registering gsi 31 triggering 0 polarity 1 > [ 1.441440] xen_map_pirq_gsi: returning irq 31 for gsi 31 > [ 1.441443] xen: --> pirq=31 -> irq=31 > [ 1.441445] Already setup the GSI :31 > [ 1.441447] xen-pciback 0000:0a:00.6: PCI INT D -> GSI 31 (level, low) -> > IRQ 31 > [ 1.441451] xen-pciback 0000:0a:00.6: reset device > [ 1.441457] xen-pciback 0000:0a:00.6: PCI INT D disabled > [ 1.441462] xen-pciback 0000:0a:00.5: initializing... > [ 1.441463] xen-pciback 0000:0a:00.5: initializing config > [ 1.441465] xen-pciback 0000:0a:00.5: initializing virtual configuration > space > [ 1.441467] xen-pciback 0000:0a:00.5: added config field at offset 0x00 > [ 1.441469] xen-pciback 0000:0a:00.5: added config field at offset 0x02 > [ 1.441471] xen-pciback 0000:0a:00.5: added config field at offset 0x04 > [ 1.441473] xen-pciback 0000:0a:00.5: added config field at offset 0x3c > [ 1.441475] xen-pciback 0000:0a:00.5: added config field at offset 0x3d > [ 1.441477] xen-pciback 0000:0a:00.5: added config field at offset 0x0c > [ 1.441479] xen-pciback 0000:0a:00.5: added config field at offset 0x0d > [ 1.441488] xen-pciback 0000:0a:00.5: added config field at offset 0x0f > [ 1.441490] xen-pciback 0000:0a:00.5: added config field at offset 0x10 > [ 1.441491] xen-pciback 0000:0a:00.5: added config field at offset 0x14 > [ 1.441493] xen-pciback 0000:0a:00.5: added config field at offset 0x18 > [ 1.441495] xen-pciback 0000:0a:00.5: added config field at offset 0x1c > [ 1.441497] xen-pciback 0000:0a:00.5: added config field at offset 0x20 > [ 1.441499] xen-pciback 0000:0a:00.5: added config field at offset 0x24 > [ 1.441501] xen-pciback 0000:0a:00.5: added config field at offset 0x30 > [ 1.441528] xen-pciback 0000:0a:00.5: Found capability 0x1 at 0x78 > [ 1.441530] xen-pciback 0000:0a:00.5: added config field at offset 0x78 > [ 1.441532] xen-pciback 0000:0a:00.5: added config field at offset 0x7a > [ 1.441536] xen-pciback 0000:0a:00.5: added config field at offset 0x7c > [ 1.441538] xen-pciback 0000:0a:00.5: added config field at offset 0x7e > [ 1.441539] xen-pciback 0000:0a:00.5: added config field at offset 0x7f > [ 1.441541] xen-pciback 0000:0a:00.5: enabling device > [ 1.441547] xen: registering gsi 30 triggering 0 polarity 1 > [ 1.441552] xen: --> pirq=30 -> irq=30 > [ 1.441566] xen-pciback 0000:0a:00.5: PCI INT C -> GSI 30 (level, low) -> > IRQ 30 > [ 1.441577] xen-pciback 0000:0a:00.5: reset device > [ 1.441584] xen-pciback 0000:0a:00.5: PCI INT C disabled > [ 1.441589] xen-pciback 0000:0a:00.4: initializing... > [ 1.441591] xen-pciback 0000:0a:00.4: initializing config > [ 1.441593] xen-pciback 0000:0a:00.4: initializing virtual configuration > space > [ 1.441595] xen-pciback 0000:0a:00.4: added config field at offset 0x00 > [ 1.441597] xen-pciback 0000:0a:00.4: added config field at offset 0x02 > [ 1.441598] xen-pciback 0000:0a:00.4: added config field at offset 0x04 > [ 1.441600] xen-pciback 0000:0a:00.4: added config field at offset 0x3c > [ 1.441602] xen-pciback 0000:0a:00.4: added config field at offset 0x3d > [ 1.441604] xen-pciback 0000:0a:00.4: added config field at offset 0x0c > [ 1.441606] xen-pciback 0000:0a:00.4: added config field at offset 0x0d > [ 1.441608] xen-pciback 0000:0a:00.4: added config field at offset 0x0f > [ 1.441610] xen-pciback 0000:0a:00.4: added config field at offset 0x10 > [ 1.441612] xen-pciback 0000:0a:00.4: added config field at offset 0x14 > [ 1.441614] xen-pciback 0000:0a:00.4: added config field at offset 0x18 > [ 1.441616] xen-pciback 0000:0a:00.4: added config field at offset 0x1c > [ 1.441618] xen-pciback 0000:0a:00.4: added config field at offset 0x20 > [ 1.441620] xen-pciback 0000:0a:00.4: added config field at offset 0x24 > [ 1.441622] xen-pciback 0000:0a:00.4: added config field at offset 0x30 > [ 1.441648] xen-pciback 0000:0a:00.4: Found capability 0x1 at 0x78 > [ 1.441650] xen-pciback 0000:0a:00.4: added config field at offset 0x78 > [ 1.441652] xen-pciback 0000:0a:00.4: added config field at offset 0x7a > [ 1.441663] xen-pciback 0000:0a:00.4: added config field at offset 0x7c > [ 1.441665] xen-pciback 0000:0a:00.4: added config field at offset 0x7e > [ 1.441667] xen-pciback 0000:0a:00.4: added config field at offset 0x7f > [ 1.441669] xen-pciback 0000:0a:00.4: enabling device > [ 1.441675] xen: registering gsi 30 triggering 0 polarity 1 > [ 1.441677] xen_map_pirq_gsi: returning irq 30 for gsi 30 > [ 1.441680] xen: --> pirq=30 -> irq=30 > [ 1.441681] Already setup the GSI :30 > [ 1.441684] xen-pciback 0000:0a:00.4: PCI INT C -> GSI 30 (level, low) -> > IRQ 30 > [ 1.441688] xen-pciback 0000:0a:00.4: reset device > [ 1.441694] xen-pciback 0000:0a:00.4: PCI INT C disabled > [ 1.441699] xen-pciback 0000:0a:00.3: initializing... > [ 1.441701] xen-pciback 0000:0a:00.3: initializing config > [ 1.441702] xen-pciback 0000:0a:00.3: initializing virtual configuration > space > [ 1.441704] xen-pciback 0000:0a:00.3: added config field at offset 0x00 > [ 1.441706] xen-pciback 0000:0a:00.3: added config field at offset 0x02 > [ 1.441708] xen-pciback 0000:0a:00.3: added config field at offset 0x04 > [ 1.441710] xen-pciback 0000:0a:00.3: added config field at offset 0x3c > [ 1.441712] xen-pciback 0000:0a:00.3: added config field at offset 0x3d > [ 1.441714] xen-pciback 0000:0a:00.3: added config field at offset 0x0c > [ 1.441716] xen-pciback 0000:0a:00.3: added config field at offset 0x0d > [ 1.441718] xen-pciback 0000:0a:00.3: added config field at offset 0x0f > [ 1.441720] xen-pciback 0000:0a:00.3: added config field at offset 0x10 > [ 1.441722] xen-pciback 0000:0a:00.3: added config field at offset 0x14 > [ 1.441724] xen-pciback 0000:0a:00.3: added config field at offset 0x18 > [ 1.441726] xen-pciback 0000:0a:00.3: added config field at offset 0x1c > [ 1.441727] xen-pciback 0000:0a:00.3: added config field at offset 0x20 > [ 1.441729] xen-pciback 0000:0a:00.3: added config field at offset 0x24 > [ 1.441733] xen-pciback 0000:0a:00.3: added config field at offset 0x30 > [ 1.441767] xen-pciback 0000:0a:00.3: Found capability 0x1 at 0x78 > [ 1.441769] xen-pciback 0000:0a:00.3: added config field at offset 0x78 > [ 1.441771] xen-pciback 0000:0a:00.3: added config field at offset 0x7a > [ 1.441775] xen-pciback 0000:0a:00.3: added config field at offset 0x7c > [ 1.441777] xen-pciback 0000:0a:00.3: added config field at offset 0x7e > [ 1.441779] xen-pciback 0000:0a:00.3: added config field at offset 0x7f > [ 1.441781] xen-pciback 0000:0a:00.3: enabling device > [ 1.441787] xen: registering gsi 29 triggering 0 polarity 1 > [ 1.441792] xen: --> pirq=29 -> irq=29 > [ 1.441806] xen-pciback 0000:0a:00.3: PCI INT B -> GSI 29 (level, low) -> > IRQ 29 > [ 1.441810] xen-pciback 0000:0a:00.3: reset device > [ 1.441817] xen-pciback 0000:0a:00.3: PCI INT B disabled > [ 1.441821] xen-pciback 0000:0a:00.2: initializing... > [ 1.441823] xen-pciback 0000:0a:00.2: initializing config > [ 1.441825] xen-pciback 0000:0a:00.2: initializing virtual configuration > space > [ 1.441835] xen-pciback 0000:0a:00.2: added config field at offset 0x00 > [ 1.441836] xen-pciback 0000:0a:00.2: added config field at offset 0x02 > [ 1.441838] xen-pciback 0000:0a:00.2: added config field at offset 0x04 > [ 1.441840] xen-pciback 0000:0a:00.2: added config field at offset 0x3c > [ 1.441842] xen-pciback 0000:0a:00.2: added config field at offset 0x3d > [ 1.441844] xen-pciback 0000:0a:00.2: added config field at offset 0x0c > [ 1.441846] xen-pciback 0000:0a:00.2: added config field at offset 0x0d > [ 1.441848] xen-pciback 0000:0a:00.2: added config field at offset 0x0f > [ 1.441850] xen-pciback 0000:0a:00.2: added config field at offset 0x10 > [ 1.441852] xen-pciback 0000:0a:00.2: added config field at offset 0x14 > [ 1.441854] xen-pciback 0000:0a:00.2: added config field at offset 0x18 > [ 1.441856] xen-pciback 0000:0a:00.2: added config field at offset 0x1c > [ 1.441858] xen-pciback 0000:0a:00.2: added config field at offset 0x20 > [ 1.441860] xen-pciback 0000:0a:00.2: added config field at offset 0x24 > [ 1.441862] xen-pciback 0000:0a:00.2: added config field at offset 0x30 > [ 1.441888] xen-pciback 0000:0a:00.2: Found capability 0x1 at 0x78 > [ 1.441890] xen-pciback 0000:0a:00.2: added config field at offset 0x78 > [ 1.441892] xen-pciback 0000:0a:00.2: added config field at offset 0x7a > [ 1.441896] xen-pciback 0000:0a:00.2: added config field at offset 0x7c > [ 1.441898] xen-pciback 0000:0a:00.2: added config field at offset 0x7e > [ 1.441900] xen-pciback 0000:0a:00.2: added config field at offset 0x7f > [ 1.441902] xen-pciback 0000:0a:00.2: enabling device > [ 1.441908] xen: registering gsi 29 triggering 0 polarity 1 > [ 1.441910] xen_map_pirq_gsi: returning irq 29 for gsi 29 > [ 1.441920] xen: --> pirq=29 -> irq=29 > [ 1.441921] Already setup the GSI :29 > [ 1.441924] xen-pciback 0000:0a:00.2: PCI INT B -> GSI 29 (level, low) -> > IRQ 29 > [ 1.441928] xen-pciback 0000:0a:00.2: reset device > [ 1.441934] xen-pciback 0000:0a:00.2: PCI INT B disabled > [ 1.441939] xen-pciback 0000:0a:00.1: initializing... > [ 1.441940] xen-pciback 0000:0a:00.1: initializing config > [ 1.441942] xen-pciback 0000:0a:00.1: initializing virtual configuration > space > [ 1.441944] xen-pciback 0000:0a:00.1: added config field at offset 0x00 > [ 1.441946] xen-pciback 0000:0a:00.1: added config field at offset 0x02 > [ 1.441948] xen-pciback 0000:0a:00.1: added config field at offset 0x04 > [ 1.441950] xen-pciback 0000:0a:00.1: added config field at offset 0x3c > [ 1.441952] xen-pciback 0000:0a:00.1: added config field at offset 0x3d > [ 1.441954] xen-pciback 0000:0a:00.1: added config field at offset 0x0c > [ 1.441955] xen-pciback 0000:0a:00.1: added config field at offset 0x0d > [ 1.441957] xen-pciback 0000:0a:00.1: added config field at offset 0x0f > [ 1.441959] xen-pciback 0000:0a:00.1: added config field at offset 0x10 > [ 1.441961] xen-pciback 0000:0a:00.1: added config field at offset 0x14 > [ 1.441963] xen-pciback 0000:0a:00.1: added config field at offset 0x18 > [ 1.441965] xen-pciback 0000:0a:00.1: added config field at offset 0x1c > [ 1.441967] xen-pciback 0000:0a:00.1: added config field at offset 0x20 > [ 1.441969] xen-pciback 0000:0a:00.1: added config field at offset 0x24 > [ 1.441971] xen-pciback 0000:0a:00.1: added config field at offset 0x30 > [ 1.441998] xen-pciback 0000:0a:00.1: Found capability 0x1 at 0x78 > [ 1.442007] xen-pciback 0000:0a:00.1: added config field at offset 0x78 > [ 1.442009] xen-pciback 0000:0a:00.1: added config field at offset 0x7a > [ 1.442012] xen-pciback 0000:0a:00.1: added config field at offset 0x7c > [ 1.442014] xen-pciback 0000:0a:00.1: added config field at offset 0x7e > [ 1.442016] xen-pciback 0000:0a:00.1: added config field at offset 0x7f > [ 1.442018] xen-pciback 0000:0a:00.1: enabling device > [ 1.442024] xen: registering gsi 28 triggering 0 polarity 1 > [ 1.442029] xen: --> pirq=28 -> irq=28 > [ 1.442042] xen-pciback 0000:0a:00.1: PCI INT A -> GSI 28 (level, low) -> > IRQ 28 > [ 1.442046] xen-pciback 0000:0a:00.1: reset device > [ 1.442053] xen-pciback 0000:0a:00.1: PCI INT A disabled > [ 1.442058] xen-pciback 0000:0a:00.0: initializing... > [ 1.442060] xen-pciback 0000:0a:00.0: initializing config > [ 1.442062] xen-pciback 0000:0a:00.0: initializing virtual configuration > space > [ 1.442064] xen-pciback 0000:0a:00.0: added config field at offset 0x00 > [ 1.442066] xen-pciback 0000:0a:00.0: added config field at offset 0x02 > [ 1.442067] xen-pciback 0000:0a:00.0: added config field at offset 0x04 > [ 1.442069] xen-pciback 0000:0a:00.0: added config field at offset 0x3c > [ 1.442071] xen-pciback 0000:0a:00.0: added config field at offset 0x3d > [ 1.442073] xen-pciback 0000:0a:00.0: added config field at offset 0x0c > [ 1.442075] xen-pciback 0000:0a:00.0: added config field at offset 0x0d > [ 1.442077] xen-pciback 0000:0a:00.0: added config field at offset 0x0f > [ 1.442079] xen-pciback 0000:0a:00.0: added config field at offset 0x10 > [ 1.442081] xen-pciback 0000:0a:00.0: added config field at offset 0x14 > [ 1.442083] xen-pciback 0000:0a:00.0: added config field at offset 0x18 > [ 1.442085] xen-pciback 0000:0a:00.0: added config field at offset 0x1c > [ 1.442094] xen-pciback 0000:0a:00.0: added config field at offset 0x20 > [ 1.442098] xen-pciback 0000:0a:00.0: added config field at offset 0x24 > [ 1.442100] xen-pciback 0000:0a:00.0: added config field at offset 0x30 > [ 1.442127] xen-pciback 0000:0a:00.0: Found capability 0x1 at 0x78 > [ 1.442129] xen-pciback 0000:0a:00.0: added config field at offset 0x78 > [ 1.442131] xen-pciback 0000:0a:00.0: added config field at offset 0x7a > [ 1.442135] xen-pciback 0000:0a:00.0: added config field at offset 0x7c > [ 1.442137] xen-pciback 0000:0a:00.0: added config field at offset 0x7e > [ 1.442138] xen-pciback 0000:0a:00.0: added config field at offset 0x7f > [ 1.442140] xen-pciback 0000:0a:00.0: enabling device > [ 1.442146] xen: registering gsi 28 triggering 0 polarity 1 > [ 1.442149] xen_map_pirq_gsi: returning irq 28 for gsi 28 > [ 1.442152] xen: --> pirq=28 -> irq=28 > [ 1.442153] Already setup the GSI :28 > [ 1.442156] xen-pciback 0000:0a:00.0: PCI INT A -> GSI 28 (level, low) -> > IRQ 28 > [ 1.442159] xen-pciback 0000:0a:00.0: reset device > [ 1.442165] xen-pciback 0000:0a:00.0: PCI INT A disabled > [ 1.442406] xen: registering gsi 24 triggering 0 polarity 1 > [ 1.442412] xen: --> pirq=24 -> irq=24 > [ 1.442427] nvidiafb 0000:0b:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ > 24 > [ 1.445962] nvidiafb: Device ID: 10de06e4 > [ 1.445965] nvidiafb: unknown NV_ARCH > [ 1.448769] usbcore: registered new interface driver udlfb > [ 1.448824] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 > [ 1.448828] vesafb: scrolling: redraw > [ 1.448830] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > [ 1.451158] vesafb: framebuffer at 0xfb000000, mapped to > 0xffffc90011180000, using 10240k, total 14336k > [ 1.474590] Console: switching to colour frame buffer device 160x64 > [ 1.496896] fb0: VESA VGA frame buffer device > [ 1.497279] input: Power Button as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > [ 1.497498] ACPI: Power Button [PWRB] > [ 1.497694] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 1.497885] ACPI: Power Button [PWRF] > [ 1.498353] ACPI: acpi_idle registered with cpuidle > [ 1.498785] ACPI: CPU-1 (power states: C1[C1] C2[C2]) > [ 1.498979] ACPI: CPU-1 (power states: C1[C1] C2[C2]) > [ 1.499162] ACPI: CPU-1 (power states: C1[C1] C2[C2]) > [ 1.499370] ACPI: CPU-1 (power states: C1[C1] C2[C2]) > [ 1.499555] ACPI: CPU-1 (power states: C1[C1] C2[C2]) > [ 1.499776] ACPI: CPU-1 (power states: C1[C1] C2[C2]) > [ 1.787886] Event-channel device installed. > [ 1.791583] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 2.137245] Non-volatile memory driver v1.3 > [ 2.137765] Linux agpgart interface v0.103 > [ 2.146896] brd: module loaded > [ 2.195669] loop: module loaded > [ 2.196640] ahci 0000:00:11.0: version 3.0 > [ 2.196653] xen: registering gsi 19 triggering 0 polarity 1 > [ 2.196669] xen: --> pirq=19 -> irq=19 > [ 2.196711] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > [ 2.197158] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf > impl SATA mode > [ 2.197355] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp > pio slum part > [ 2.198890] scsi0 : ahci > [ 2.199135] scsi1 : ahci > [ 2.199348] scsi2 : ahci > [ 2.199565] scsi3 : ahci > [ 2.199826] ata1: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff100 > irq 343 > [ 2.200008] ata2: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff180 > irq 343 > [ 2.200198] ata3: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff200 > irq 343 > [ 2.200383] ata4: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff280 > irq 343 > [ 2.202047] e1000: Intel(R) PRO/1000 Network Driver - version > 7.3.21-k8-NAPI > [ 2.202218] e1000: Copyright (c) 1999-2006 Intel Corporation. > [ 2.202444] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 > [ 2.202588] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. > [ 2.202824] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2 > [ 2.202983] Copyright (c) 2007-2011 Intel Corporation. > [ 2.208685] Intel(R) Virtual Function Network Driver - version 1.0.8-k0 > [ 2.212679] Copyright (c) 2009 - 2010 Intel Corporation. > [ 2.220509] tun: Universal TUN/TAP device driver, 1.6 > [ 2.224505] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > [ 2.231841] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 2.235827] xen: registering gsi 46 triggering 0 polarity 1 > [ 2.237425] xen_map_pirq_gsi: returning irq 46 for gsi 46 > [ 2.241413] xen: --> pirq=46 -> irq=46 > [ 2.242991] Already setup the GSI :46 > [ 2.248141] r8169 0000:09:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46 > [ 2.248141] r8169 0000:09:00.0: enabling Mem-Wr-Inval > [ 2.248652] r8169 0000:09:00.0: setting latency timer to 64 > [ 2.254479] r8169 0000:09:00.0: eth0: RTL8168d/8111d at > 0xffffc90000022000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 344 > [ 2.260291] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 2.266084] xen: registering gsi 51 triggering 0 polarity 1 > [ 2.266094] xen: --> pirq=51 -> irq=51 > [ 2.266119] r8169 0000:08:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51 > [ 2.270032] r8169 0000:08:00.0: enabling Mem-Wr-Inval > [ 2.271954] r8169 0000:08:00.0: setting latency timer to 64 > [ 2.272326] r8169 0000:08:00.0: eth1: RTL8168d/8111d at > 0xffffc90000024000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 345 > [ 2.278386] console [netcon0] enabled > [ 2.282377] netconsole: network logging started > [ 2.290316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.296210] xen: registering gsi 17 triggering 0 polarity 1 > [ 2.296219] xen: --> pirq=17 -> irq=17 > [ 2.296262] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ > 17 > [ 2.302202] ehci_hcd 0000:00:12.2: enabling bus mastering > [ 2.302207] ehci_hcd 0000:00:12.2: EHCI Host Controller > [ 2.308273] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus > number 1 > [ 2.314267] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 > EHCI dummy qh workaround > [ 2.318223] QUIRK: Enable AMD PLL fix > [ 2.318223] ehci_hcd 0000:00:12.2: debug port 1 > [ 2.318223] ehci_hcd 0000:00:12.2: enabling Mem-Wr-Inval > [ 2.318223] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf98ff400 > [ 2.344207] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 > [ 2.350073] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 2.354052] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.354052] usb usb1: Product: EHCI Host Controller > [ 2.354052] usb usb1: Manufacturer: Linux > 3.0.0-rc3-xen-konrad-devel-next-20110621+ ehci_hcd > [ 2.354052] usb usb1: SerialNumber: 0000:00:12.2 > [ 2.379208] hub 1-0:1.0: USB hub found > [ 2.384841] hub 1-0:1.0: 5 ports detected > [ 2.390461] xen: registering gsi 17 triggering 0 polarity 1 > [ 2.390466] xen_map_pirq_gsi: returning irq 17 for gsi 17 > [ 2.394355] xen: --> pirq=17 -> irq=17 > [ 2.396033] Already setup the GSI :17 > [ 2.400031] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ > 17 > [ 2.407505] ehci_hcd 0000:00:13.2: enabling bus mastering > [ 2.407511] ehci_hcd 0000:00:13.2: EHCI Host Controller > [ 2.413491] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus > number 2 > [ 2.419505] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 > EHCI dummy qh workaround > [ 2.423462] ehci_hcd 0000:00:13.2: debug port 1 > [ 2.423462] ehci_hcd 0000:00:13.2: enabling Mem-Wr-Inval > [ 2.423462] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf98ff800 > [ 2.448207] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 > [ 2.448233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > [ 2.448235] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.448237] usb usb2: Product: EHCI Host Controller > [ 2.448238] usb usb2: Manufacturer: Linux > 3.0.0-rc3-xen-konrad-devel-next-20110621+ ehci_hcd > [ 2.448240] usb usb2: SerialNumber: 0000:00:13.2 > [ 2.484926] hub 2-0:1.0: USB hub found > [ 2.491060] hub 2-0:1.0: 5 ports detected > [ 2.497138] xen: registering gsi 17 triggering 0 polarity 1 > [ 2.497142] xen_map_pirq_gsi: returning irq 17 for gsi 17 > [ 2.501036] xen: --> pirq=17 -> irq=17 > [ 2.503249] Already setup the GSI :17 > [ 2.507247] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ > 17 > [ 2.515731] ehci_hcd 0000:00:16.2: enabling bus mastering > [ 2.515737] ehci_hcd 0000:00:16.2: EHCI Host Controller > [ 2.522117] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus > number 3 > [ 2.524177] ata2: SATA link down (SStatus 0 SControl 300) > [ 2.524241] ata4: SATA link down (SStatus 0 SControl 300) > [ 2.541351] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 > EHCI dummy qh workaround > [ 2.545307] ehci_hcd 0000:00:16.2: debug port 1 > [ 2.545307] ehci_hcd 0000:00:16.2: enabling Mem-Wr-Inval > [ 2.545307] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf98ffc00 > [ 2.572217] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 > [ 2.578619] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 > [ 2.582591] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.582591] usb usb3: Product: EHCI Host Controller > [ 2.596153] usb usb3: Manufacturer: Linux > 3.0.0-rc3-xen-konrad-devel-next-20110621+ ehci_hcd > [ 2.596153] usb usb3: SerialNumber: 0000:00:16.2 > [ 2.610831] hub 3-0:1.0: USB hub found > [ 2.617186] hub 3-0:1.0: 4 ports detected > [ 2.623660] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 2.630054] xen: registering gsi 18 triggering 0 polarity 1 > [ 2.630067] xen: --> pirq=18 -> irq=18 > [ 2.630100] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ > 18 > [ 2.636509] ohci_hcd 0000:00:12.0: OHCI Host Controller > [ 2.642937] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus > number 4 > [ 2.649311] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf98fb000 > [ 2.696210] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 2.704281] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 2.712528] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133 > [ 2.716235] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.716243] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.716250] usb usb4: Product: OHCI Host Controller > [ 2.716256] usb usb4: Manufacturer: Linux > 3.0.0-rc3-xen-konrad-devel-next-20110621+ ohci_hcd > [ 2.716263] usb usb4: SerialNumber: 0000:00:12.0 > [ 2.720214] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth > 31/32), AA > [ 2.756673] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01110, max UDMA7 > [ 2.756820] hub 4-0:1.0: USB hub found > [ 2.756826] hub 4-0:1.0: 5 ports detected > [ 2.756897] xen: registering gsi 18 triggering 0 polarity 1 > [ 2.756902] xen_map_pirq_gsi: returning irq 18 for gsi 18 > [ 2.756903] xen: --> pirq=18 -> irq=18 > [ 2.756905] Already setup the GSI :18 > [ 2.756907] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ > 18 > [ 2.756925] ohci_hcd 0000:00:13.0: OHCI Host Controller > [ 2.757107] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus > number 5 > [ 2.757147] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf98fc000 > [ 2.764219] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth > 31/32), AA > [ 2.816149] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.816152] usb usb5: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.816154] usb usb5: Product: OHCI Host Controller > [ 2.816156] usb usb5: Manufacturer: Linux > 3.0.0-rc3-xen-konrad-devel-next-20110621+ ohci_hcd > [ 2.816157] usb usb5: SerialNumber: 0000:00:13.0 > [ 2.816407] hub 5-0:1.0: USB hub found > [ 2.816416] hub 5-0:1.0: 5 ports detected > [ 2.816488] xen: registering gsi 18 triggering 0 polarity 1 > [ 2.816492] xen_map_pirq_gsi: returning irq 18 for gsi 18 > [ 2.816494] xen: --> pirq=18 -> irq=18 > [ 2.816495] Already setup the GSI :18 > [ 2.816497] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ > 18 > [ 2.816516] ohci_hcd 0000:00:14.5: OHCI Host Controller > [ 2.816607] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus > number 6 > [ 2.816658] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf98fd000 > [ 2.876131] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.876134] usb usb6: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.876135] usb usb6: Product: OHCI Host Controller > [ 2.876137] usb usb6: Manufacturer: Linux > 3.0.0-rc3-xen-konrad-devel-next-20110621+ ohci_hcd > [ 2.876139] usb usb6: SerialNumber: 0000:00:14.5 > [ 2.876388] hub 6-0:1.0: USB hub found > [ 2.876395] hub 6-0:1.0: 2 ports detected > [ 2.876464] xen: registering gsi 18 triggering 0 polarity 1 > [ 2.876468] xen_map_pirq_gsi: returning irq 18 for gsi 18 > [ 2.876470] xen: --> pirq=18 -> irq=18 > [ 2.876471] Already setup the GSI :18 > [ 2.876473] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ > 18 > [ 2.876489] ohci_hcd 0000:00:16.0: OHCI Host Controller > [ 2.876566] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus > number 7 > [ 2.876617] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf98fe000 > [ 2.936130] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.936133] usb usb7: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.936135] usb usb7: Product: OHCI Host Controller > [ 2.936136] usb usb7: Manufacturer: Linux > 3.0.0-rc3-xen-konrad-devel-next-20110621+ ohci_hcd > [ 2.936138] usb usb7: SerialNumber: 0000:00:16.0 > [ 2.936386] hub 7-0:1.0: USB hub found > [ 2.936392] hub 7-0:1.0: 4 ports detected > [ 2.936522] uhci_hcd: USB Universal Host Controller Interface driver > [ 2.936723] usbcore: registered new interface driver usblp > [ 2.936724] Initializing USB Mass Storage driver... > [ 2.936794] usbcore: registered new interface driver usb-storage > [ 2.936795] USB Mass Storage support registered. > [ 2.936866] usbcore: registered new interface driver libusual > [ 2.936989] usbcore: registered new interface driver usbserial > [ 2.936990] usbserial: USB Serial Driver core > [ 2.937048] USB Serial support registered for pl2303 > [ 2.937110] usbcore: registered new interface driver pl2303 > [ 2.937111] pl2303: Prolific PL2303 USB to serial adaptor driver > [ 2.937347] i8042: PNP: No PS/2 controller found. Probing ports directly. > [ 3.091945] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 3.092094] ata1.00: configured for UDMA/133 > [ 3.092217] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO > PQ: 0 ANSI: 5 > [ 3.092769] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 > TB/1.81 TiB) > [ 3.092834] sd 0:0:0:0: [sda] Write Protect is off > [ 3.092836] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.092861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 3.092983] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 3.098259] ata3.00: configured for UDMA/133 > [ 3.098342] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 > PQ: 0 ANSI: 5 > [ 3.098595] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 > TB/931 GiB) > [ 3.098656] sd 2:0:0:0: [sdb] Write Protect is off > [ 3.098658] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 3.098681] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 3.098865] sd 2:0:0:0: Attached scsi generic sg1 type 0 > [ 3.100428] sda: sda1 sda2 > [ 3.102103] sdb: sdb1 > [ 3.095779] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 3.190327] sd 2:0:0:0: [sdb] Attached SCSI disk > [ 3.190335] mousedev: PS/2 mouse device common for all mice > [ 3.190600] sd 0:0:0:0: [sda] Attached SCSI disk > [ 3.190674] rtc_cmos 00:04: RTC can wake from S4 > [ 3.190986] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > [ 3.191044] rtc0: alarms up to one month, y3k, 114 bytes nvram > [ 3.191323] lirc_dev: IR Remote Control driver registered, major 251 > [ 3.191325] IR NEC protocol handler initialized > [ 3.191326] IR RC5(x) protocol handler initialized > [ 3.191328] IR RC6 protocol handler initialized > [ 3.191329] IR JVC protocol handler initialized > [ 3.191330] IR Sony protocol handler initialized > [ 3.191331] IR RC5 (streamzap) protocol handler initialized > [ 3.191332] IR LIRC bridge handler initialized > [ 3.191334] Linux video capture interface: v2.00 > [ 3.191451] i2c-core: driver [tuner] using legacy suspend method > [ 3.191452] i2c-core: driver [tuner] using legacy resume method > [ 3.191627] i2c-core: driver [msp3400] using legacy suspend method > [ 3.191629] i2c-core: driver [msp3400] using legacy resume method > [ 3.191926] usbcore: registered new interface driver em28xx > [ 3.191927] em28xx driver loaded > [ 3.192110] usbcore: registered new interface driver pvrusb2 > [ 3.192112] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 > Encoder/Tuner > [ 3.192113] pvrusb2: Debug mask is 31 (0x1f) > [ 3.192115] gspca: v2.13.0 registered > [ 3.192181] usbcore: registered new interface driver uvcvideo > [ 3.192182] USB Video Class driver (v1.1.0) > [ 3.192399] f71882fg: Found f71889ed chip at 0x600, revision 16 > [ 3.192656] f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode > [ 3.192658] f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode > [ 3.192660] f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode > [ 3.193285] f71808e_wdt: Unrecognized Fintek device: 0909 > [ 3.193290] wdt: Xen WatchDog Timer Driver v0.01 > [ 3.193474] wdt: initialized (timeout=60s, nowayout=0) > [ 3.193731] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: > dm-devel@xxxxxxxxxx > [ 3.193807] device-mapper: multipath: version 1.3.0 loaded > [ 3.193809] device-mapper: multipath round-robin: version 1.0.0 loaded > [ 3.193930] cpuidle: using governor ladder > [ 3.193931] cpuidle: using governor menu > [ 3.420056] usbcore: registered new interface driver usbhid > [ 3.424141] usbhid: USB HID core driver > [ 3.426304] usbcore: registered new interface driver snd-usb-audio > [ 3.426306] ALSA device list: > [ 3.426307] No soundcards found. > [ 3.426311] Netfilter messages via NETLINK v0.30. > [ 3.426333] nf_conntrack version 0.5.0 (4446 buckets, 17784 max) > [ 3.426552] ctnetlink v0.93: registering with nfnetlink. > [ 3.426575] xt_time: kernel timezone is -0000 > [ 3.426578] ip_set: protocol 6 > [ 3.426641] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 3.426693] TCP cubic registered > [ 3.426695] NET: Registered protocol family 17 > [ 3.426714] Bridge firewalling registered > [ 3.426718] Ebtables v2.0 registered > [ 3.426753] Registering the dns_resolver key type > [ 3.507185] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 > cpu cores) (version 2.20.00) > [ 3.512627] powernow-k8: Core Performance Boosting: on. > [ 3.518009] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects > found. > [ 3.518010] [Firmware Bug]: powernow-k8: Try again with latest BIOS. > [ 3.529308] Freeing unused kernel memory: 812k freed > [ 4.571229] EXT4-fs (dm-0): Ignoring delalloc option - requested data > journaling mode > [ 4.578894] EXT4-fs (dm-0): mounted filesystem with journalled data mode. > Opts: (null) > [ 6.150024] udev[2171]: starting version 164 > [ 7.168170] ata1.00: configured for UDMA/133 > [ 7.172081] ata1: EH complete > [ 7.597633] ata1.00: configured for UDMA/133 > [ 7.597647] ata1: EH complete > [ 8.236925] EXT4-fs (dm-0): warning: maximal mount count reached, running > e2fsck is recommended > [ 8.237497] EXT4-fs (dm-0): re-mounted. Opts: barrier=1,errors=remount-ro > [ 13.097684] Adding 2097148k swap on /dev/mapper/serveerstertje-swap. > Priority:-1 extents:1 across:2097148k > [ 13.554821] EXT4-fs (sda1): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 15.410434] r8169 0000:08:00.0: eth1: unable to load firmware patch > rtl_nic/rtl8168d-1.fw (-2) > [ 15.428020] r8169 0000:08:00.0: eth1: link down > [ 15.428076] r8169 0000:08:00.0: eth1: link down > [ 15.527798] r8169 0000:09:00.0: eth0: unable to load firmware patch > rtl_nic/rtl8168d-1.fw (-2) > [ 15.543183] r8169 0000:09:00.0: eth0: link down > [ 15.544083] r8169 0000:09:00.0: eth0: link down > [ 17.031497] r8169 0000:08:00.0: eth1: link up > [ 17.199037] r8169 0000:09:00.0: eth0: link up > [ 32.907488] sshd (4319): /proc/4319/oom_adj is deprecated, please use > /proc/4319/oom_score_adj instead. > [ 33.541899] EXT4-fs (dm-2): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 34.018583] EXT4-fs (dm-3): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 34.445424] EXT4-fs (dm-4): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 34.803108] EXT4-fs (dm-5): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 162.652515] FW: ipmasq, Input .. EoC: IN=eth0 OUT= > MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 > LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=13832 PROTO=2 > [ 213.659087] EXT4-fs (dm-6): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 214.106619] EXT4-fs (dm-9): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 214.347365] EXT4-fs (sdb1): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 217.920297] XENBUS: Unable to read cpu state > [ 217.932479] XENBUS: Unable to read cpu state > [ 217.944730] XENBUS: Unable to read cpu state > [ 217.944844] XENBUS: Unable to read cpu state > [ 217.944940] XENBUS: Unable to read cpu state > [ 217.945050] XENBUS: Unable to read cpu state > [ 229.523485] device vif1.0 entered promiscuous mode > [ 231.944473] xen-blkback:ring-ref 8, event-channel 9, protocol 1 > (x86_64-abi) > [ 232.153879] xen-blkback:ring-ref 9, event-channel 10, protocol 1 > (x86_64-abi) > [ 232.259827] xen-blkback:ring-ref 10, event-channel 11, protocol 1 > (x86_64-abi) > [ 232.902140] xen_bridge: port 1(vif1.0) entering forwarding state > [ 232.905348] xen_bridge: port 1(vif1.0) entering forwarding state > [ 239.408752] device vif2.0 entered promiscuous mode > [ 242.322700] xen-blkback:ring-ref 8, event-channel 9, protocol 1 > (x86_64-abi) > [ 242.562785] xen-blkback:ring-ref 9, event-channel 10, protocol 1 > (x86_64-abi) > [ 243.784306] xen_bridge: port 2(vif2.0) entering forwarding state > [ 243.788066] xen_bridge: port 2(vif2.0) entering forwarding state > [ 247.964178] xen_bridge: port 1(vif1.0) entering forwarding state > [ 250.548012] device vif3.0 entered promiscuous mode > [ 253.610695] xen-blkback:ring-ref 8, event-channel 9, protocol 1 > (x86_64-abi) > [ 253.735683] xen-blkback:ring-ref 9, event-channel 10, protocol 1 > (x86_64-abi) > [ 254.622553] xen_bridge: port 3(vif3.0) entering forwarding state > [ 254.625759] xen_bridge: port 3(vif3.0) entering forwarding state > [ 258.816124] xen_bridge: port 2(vif2.0) entering forwarding state > [ 261.592908] device vif4.0 entered promiscuous mode > [ 263.384753] xen-blkback:ring-ref 8, event-channel 9, protocol 1 > (x86_64-abi) > [ 263.468603] xen-blkback:ring-ref 9, event-channel 10, protocol 1 > (x86_64-abi) > [ 264.197139] xen_bridge: port 4(vif4.0) entering forwarding state > [ 264.200059] xen_bridge: port 4(vif4.0) entering forwarding state > [ 269.660240] xen_bridge: port 3(vif3.0) entering forwarding state > [ 273.169829] device vif5.0 entered promiscuous mode > [ 275.015314] xen-blkback:ring-ref 8, event-channel 9, protocol 1 > (x86_64-abi) > [ 275.145217] xen-blkback:ring-ref 9, event-channel 10, protocol 1 > (x86_64-abi) > [ 275.658673] xen_bridge: port 5(vif5.0) entering forwarding state > [ 275.661863] xen_bridge: port 5(vif5.0) entering forwarding state > [ 279.228210] xen_bridge: port 4(vif4.0) entering forwarding state > [ 284.415438] device vif6.0 entered promiscuous mode > [ 286.468851] xen-blkback:ring-ref 8, event-channel 9, protocol 1 > (x86_64-abi) > [ 286.654135] xen-blkback:ring-ref 9, event-channel 10, protocol 1 > (x86_64-abi) > [ 287.308702] xen_bridge: port 6(vif6.0) entering forwarding state > [ 287.312057] xen_bridge: port 6(vif6.0) entering forwarding state > [ 290.716210] xen_bridge: port 5(vif5.0) entering forwarding state > [ 300.902413] device vif7.0 entered promiscuous mode > [ 302.364251] xen_bridge: port 6(vif6.0) entering forwarding state > [ 312.982077] xen-blkback:ring-ref 8, event-channel 9, protocol 1 > (x86_64-abi) > [ 313.179118] xen-blkback:ring-ref 9, event-channel 10, protocol 1 > (x86_64-abi) > [ 313.875211] xen_bridge: port 7(vif7.0) entering forwarding state > [ 313.876074] xen_bridge: port 7(vif7.0) entering forwarding state > [ 322.741232] device vif8.0 entered promiscuous mode > [ 324.824217] xen-blkback:ring-ref 8, event-channel 9, protocol 1 > (x86_64-abi) > [ 324.949602] xen-blkback:ring-ref 9, event-channel 10, protocol 1 > (x86_64-abi) > [ 325.667899] xen_bridge: port 8(vif8.0) entering forwarding state > [ 325.671098] xen_bridge: port 8(vif8.0) entering forwarding state > [ 328.924159] xen_bridge: port 7(vif7.0) entering forwarding state > [ 338.580923] device vif9.0 entered promiscuous mode > [ 340.700239] xen_bridge: port 8(vif8.0) entering forwarding state > [ 340.782370] xen-blkback:ring-ref 8, event-channel 9, protocol 1 > (x86_64-abi) > [ 340.899011] xen-blkback:ring-ref 9, event-channel 10, protocol 1 > (x86_64-abi) > [ 341.557031] xen_bridge: port 9(vif9.0) entering forwarding state > [ 341.560235] xen_bridge: port 9(vif9.0) entering forwarding state > [ 356.572104] xen_bridge: port 9(vif9.0) entering forwarding state > [ 358.631884] device vif11.0 entered promiscuous mode > [ 360.401663] xen-blkback:ring-ref 8, event-channel 9, protocol 1 > (x86_64-abi) > [ 360.522579] xen-blkback:ring-ref 9, event-channel 10, protocol 1 > (x86_64-abi) > [ 361.115003] xen_bridge: port 10(vif11.0) entering forwarding state > [ 361.118165] xen_bridge: port 10(vif11.0) entering forwarding state > [ 376.160100] xen_bridge: port 10(vif11.0) entering forwarding state > [ 377.209284] device vif13.0 entered promiscuous mode > [ 380.043674] xen-blkback:ring-ref 8, event-channel 9, protocol 1 > (x86_64-abi) > [ 380.354429] xen-blkback:ring-ref 9, event-channel 10, protocol 1 > (x86_64-abi) > [ 380.785800] xen_bridge: port 11(vif13.0) entering forwarding state > [ 380.788923] xen_bridge: port 11(vif13.0) entering forwarding state > [ 395.804239] xen_bridge: port 11(vif13.0) entering forwarding state > [ 413.861145] device vif15.0 entered promiscuous mode > [ 415.844683] xen-blkback:ring-ref 8, event-channel 9, protocol 1 > (x86_64-abi) > [ 416.010567] xen-blkback:ring-ref 9, event-channel 10, protocol 1 > (x86_64-abi) > [ 416.780539] vpn_bridge: port 1(vif15.0) entering forwarding state > [ 416.784072] vpn_bridge: port 1(vif15.0) entering forwarding state > [ 427.159777] device vif16.0 entered promiscuous mode > [ 429.265322] xen-blkback:ring-ref 8, event-channel 15, protocol 1 > (x86_64-abi) > [ 429.447366] xen-blkback:ring-ref 9, event-channel 16, protocol 1 > (x86_64-abi) > [ 429.943319] xen_bridge: port 12(vif16.0) entering forwarding state > [ 429.946370] xen_bridge: port 12(vif16.0) entering forwarding state > [ 431.836090] vpn_bridge: port 1(vif15.0) entering forwarding state > [ 441.672019] device vif17.0 entered promiscuous mode > [ 444.956134] xen_bridge: port 12(vif16.0) entering forwarding state > [ 446.169790] xen-blkback:ring-ref 8, event-channel 21, protocol 1 > (x86_64-abi) > [ 446.247533] xen-blkback:ring-ref 9, event-channel 22, protocol 1 > (x86_64-abi) > [ 448.162864] xen_bridge: port 13(vif17.0) entering forwarding state > [ 448.164073] xen_bridge: port 13(vif17.0) entering forwarding state > [ 463.196187] xen_bridge: port 13(vif17.0) entering forwarding state > [ 662.929628] FW: ipmasq, Input .. EoC: IN=eth0 OUT= > MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 > LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=16171 PROTO=2 > [ 687.860639] FW: ipmasq, Forward .. EoC: IN=eth0 OUT=eth0 > MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=10.150.1.1 > DST=10.170.103.116 LEN=200 TOS=0x00 PREC=0x00 TTL=249 ID=52178 PROTO=UDP > SPT=21314 DPT=8000 LEN=180 > [ 787.967919] FW: ipmasq, Input .. EoC: IN=eth0 OUT= > MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 > LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=16865 PROTO=2 > [ 912.973001] FW: ipmasq, Input .. EoC: IN=eth0 OUT= > MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 > LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=17268 PROTO=2 > [ 1038.008089] FW: ipmasq, Input .. EoC: IN=eth0 OUT= > MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 > LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=17781 PROTO=2 > 00:00.0 Host bridge [0600]: ATI Technologies Inc RD890 Northbridge only > single slot PCI-e GFX Hydra part [1002:5a11] (rev 02) > Subsystem: ATI Technologies Inc RD890 Northbridge only single slot > PCI-e GFX Hydra part [1002:5a11] > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ >SERR- <PERR- INTx- > Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [c4] HyperTransport: Slave or Primary Interface > Command: BaseUnitID=0 UnitCnt=20 MastHost- DefDir- DUL- > Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- > <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- > Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit > DwFcInEn- LWO=16bit DwFcOutEn- > Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ > <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- > Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit > DwFcInEn- LWO=8bit DwFcOutEn- > Revision ID: 3.00 > Link Frequency 0: [b] > Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- > Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- > Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- > Link Frequency 1: 200MHz > Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- > Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- > 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- > Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- > SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- > Prefetchable memory behind bridge Upper: 00-00 > Bus Number: 00 > Capabilities: [40] HyperTransport: Retry Mode > Capabilities: [54] HyperTransport: UnitID Clumping > Capabilities: [9c] HyperTransport: #1a > Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit- > Address: 00000000 Data: 0000 > > 00:00.2 Generic system peripheral [0806]: ATI Technologies Inc Device > [1002:5a23] > Subsystem: ATI Technologies Inc Device [1002:5a23] > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 10 > Capabilities: [40] Secure device <?> > Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0100c Data: 4128 > Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+ > > 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI > express gpp port B) [1002:5a16] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: fa000000-fe9fffff > Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 > <1us, L1 <8us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ > DLActive+ BWMgmt+ ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surprise- > Slot #1, PowerLimit 25.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ > Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -3.5dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0100c Data: 41c0 > Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11] > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 <?> > Capabilities: [190 v1] Access Control Services > ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans+ > ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans- > Kernel driver in use: pcieport > > 00:03.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI > express gpp port C) [1002:5a17] (prog-if 00 [Normal decode]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: f9f00000-f9ffffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 > <1us, L1 <8us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive+ BWMgmt+ ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surprise- > Slot #3, PowerLimit 11.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ > Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -3.5dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0100c Data: 41c8 > Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11] > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 <?> > Capabilities: [190 v1] Access Control Services > ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans+ > ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans- > Kernel driver in use: pcieport > > 00:05.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI > express gpp port E) [1002:5a19] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: f9e00000-f9efffff > Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 > <1us, L1 <8us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive+ BWMgmt+ ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surprise- > Slot #5, PowerLimit 75.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ > Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -3.5dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0100c Data: 41d0 > Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11] > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 <?> > Capabilities: [190 v1] Access Control Services > ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans+ > ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans- > Kernel driver in use: pcieport > > 00:06.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI > express gpp port F) [1002:5a1a] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: f9d00000-f9dfffff > Prefetchable memory behind bridge: 00000000cfe00000-00000000cfefffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 > <1us, L1 <8us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive+ BWMgmt+ ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surprise- > Slot #6, PowerLimit 75.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ > Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -3.5dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0100c Data: 41d8 > Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11] > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 <?> > Capabilities: [190 v1] Access Control Services > ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans+ > ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans- > Kernel driver in use: pcieport > > 00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge > (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=06, subordinate=07, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: f9c00000-f9cfffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency > L0 <1us, L1 <8us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive+ BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surprise- > Slot #2, PowerLimit 75.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ > Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0100c Data: 4121 > Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11] > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 <?> > Capabilities: [190 v1] Access Control Services > ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans+ > ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans- > Kernel driver in use: pcieport > > 00:0b.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge > (NB-SB link) [1002:5a1f] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 > I/O behind bridge: 0000b000-0000bfff > Memory behind bridge: f9b00000-f9bfffff > Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency > L0 <1us, L1 <8us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ > DLActive+ BWMgmt+ ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surprise- > Slot #5, PowerLimit 75.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ > Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -3.5dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0100c Data: 4129 > Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11] > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 <?> > Capabilities: [190 v1] Access Control Services > ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans+ > ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans- > Kernel driver in use: pcieport > > 00:0d.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge > (external gfx1 port B) [1002:5a1e] (prog-if 00 [Normal decode]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: f9a00000-f9afffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 > <1us, L1 <8us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive+ BWMgmt+ ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surprise- > Slot #4, PowerLimit 75.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ > Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, > Selectable De-emphasis: -3.5dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -3.5dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0100c Data: 4131 > Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11] > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 <?> > Capabilities: [190 v1] Access Control Services > ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans+ > ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ > EgressCtrl- DirectTrans- > Kernel driver in use: pcieport > > 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA > Controller [IDE mode] [1002:4390] (rev 40) (prog-if 01 [AHCI 1.0]) > Subsystem: Micro-Star International Co., Ltd. Device [1462:7640] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 343 > Region 0: I/O ports at 7000 [size=8] > Region 1: I/O ports at 6000 [size=4] > Region 2: I/O ports at 5000 [size=8] > Region 3: I/O ports at 3000 [size=4] > Region 4: I/O ports at 2000 [size=16] > Region 5: Memory at f98ff000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] MSI: Enable+ Count=1/4 Maskable- 64bit+ > Address: 00000000fee2000c Data: 41c1 > Capabilities: [70] SATA HBA v1.0 InCfgSpace > Capabilities: [a4] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: ahci > > 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 > Controller [1002:4397] (prog-if 10 [OHCI]) > Subsystem: Micro-Star International Co., Ltd. Device [1462:7640] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at f98fb000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > > 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI > Controller [1002:4396] (prog-if 20 [EHCI]) > Subsystem: Micro-Star International Co., Ltd. Device [1462:7640] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at f98ff400 (32-bit, non-prefetchable) [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Bridge: PM- B3+ > Capabilities: [e4] Debug port: BAR=1 offset=00e0 > Kernel driver in use: ehci_hcd > > 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 > Controller [1002:4397] (prog-if 10 [OHCI]) > Subsystem: Micro-Star International Co., Ltd. Device [1462:7640] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at f98fc000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > > 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI > Controller [1002:4396] (prog-if 20 [EHCI]) > Subsystem: Micro-Star International Co., Ltd. Device [1462:7640] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at f98ff800 (32-bit, non-prefetchable) [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Bridge: PM- B3+ > Capabilities: [e4] Debug port: BAR=1 offset=00e0 > Kernel driver in use: ehci_hcd > > 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] > (rev 41) > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller > [1002:439c] (rev 40) (prog-if 8a [Master SecP PriP]) > Subsystem: Micro-Star International Co., Ltd. Device [1462:7640] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 0 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at ff00 [size=16] > > 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host > controller [1002:439d] (rev 40) > Subsystem: Micro-Star International Co., Ltd. Device [1462:7640] > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge > [1002:4384] (rev 40) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 > I/O behind bridge: 0000a000-0000afff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: fff00000-000fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 > Controller [1002:4399] (prog-if 10 [OHCI]) > Subsystem: Micro-Star International Co., Ltd. Device [1462:7640] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at f98fd000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > > 00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0] (prog-if > 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, > L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1, > Latency L0 <64ns, L1 <1us > ClockPM- Surprise- LLActRep+ BwNot+ > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- > Surprise- > Slot #32, PowerLimit 75.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- > Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- > Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ > CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd- > DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -3.5dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0100c Data: 4139 > Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:0000] > Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 <?> > Kernel driver in use: pcieport > > 00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 > Controller [1002:4397] (prog-if 10 [OHCI]) > Subsystem: Micro-Star International Co., Ltd. Device [1462:7640] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at f98fe000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > > 00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI > Controller [1002:4396] (prog-if 20 [EHCI]) > Subsystem: Micro-Star International Co., Ltd. Device [1462:7640] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at f98ffc00 (32-bit, non-prefetchable) [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Bridge: PM- B3+ > Capabilities: [e4] Debug port: BAR=1 offset=00e0 > Kernel driver in use: ehci_hcd > > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > HyperTransport Configuration [1022:1200] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: [80] HyperTransport: Host or Secondary Interface > Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- > <EOCErr- DUL- > Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- > <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- > Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit > DwFcInEn- LWO=16bit DwFcOutEn- > Revision ID: 3.00 > Link Frequency: [b] > Link Error: <Prot- <Ovfl- <EOC- CTLTm- > Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- > Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- > ExtRS- UCnfE- > > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > Address Map [1022:1201] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > DRAM Controller [1022:1202] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > Miscellaneous Control [1022:1203] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: [f0] Secure device <?> > Kernel driver in use: k10temp > > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > Link Control [1022:1204] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > 03:06.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 > [13f6:0111] (rev 10) > Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device > [13f6:0111] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 22 > Region 0: I/O ports at a800 [disabled] [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: xen-pciback > > 04:00.0 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 40 > Region 0: Memory at f9af8000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Kernel driver in use: xen-pciback > > 04:00.1 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 40 > Region 0: Memory at f9af9000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 04:00.2 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin B routed to IRQ 41 > Region 0: Memory at f9afa000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 04:00.3 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin B routed to IRQ 41 > Region 0: Memory at f9afb000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 04:00.4 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 42 > Region 0: Memory at f9afc000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 04:00.5 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 42 > Region 0: Memory at f9afd000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 04:00.6 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin D routed to IRQ 43 > Region 0: Memory at f9afe000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 04:00.7 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin D routed to IRQ 43 > Region 0: Memory at f9aff000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 05:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV620 LE > [Radeon HD 3450] [1002:95c5] (prog-if 00 [VGA controller]) > Subsystem: ASUSTeK Computer Inc. Device [1043:01d4] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 32 > Region 0: Memory at b0000000 (64-bit, prefetchable) [disabled] > [size=256M] > Region 2: Memory at f9be0000 (64-bit, non-prefetchable) [disabled] > [size=64K] > Region 4: I/O ports at b000 [disabled] [size=256] > Expansion ROM at f9bc0000 [disabled] [size=128K] > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 > unlimited > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency > L0 <64ns, L1 <1us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 <?> > Kernel driver in use: xen-pciback > > 05:00.1 Audio device [0403]: ATI Technologies Inc RV620 Audio device [Radeon > HD 34xx Series] [1002:aa28] > Subsystem: ASUSTeK Computer Inc. Device [1043:aa28] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin B routed to IRQ 33 > Region 0: Memory at f9bfc000 (64-bit, non-prefetchable) [disabled] > [size=16K] > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 > unlimited > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency > L0 <64ns, L1 <1us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=010 <?> > Kernel driver in use: xen-pciback > > 06:00.0 PCI bridge [0604]: Texas Instruments XIO2000(A)/XIO2200(A) PCI > Express-to-PCI Bridge [104c:8231] (rev 03) (prog-if 00 [Normal decode]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=06, secondary=07, subordinate=07, sec-latency=64 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: f9c00000-f9cfffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Bridge: PM- B3+ > Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID) Device > [0000:0000] > Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00 > DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 > <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry- > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency > L0 <1us, L1 <16us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- > AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- > > 07:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) > (prog-if 10 [OHCI]) > Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 44 > Region 0: Memory at f9c00000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: xen-pciback > > 07:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) > (prog-if 10 [OHCI]) > Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin B routed to IRQ 45 > Region 0: Memory at f9c01000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: xen-pciback > > 07:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) > (prog-if 20 [EHCI]) > Subsystem: Device [1838:1074] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 46 > Region 0: Memory at f9c02000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: xen-pciback > > 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. > RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) > Subsystem: Micro-Star International Co., Ltd. Device [1462:7640] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 345 > Region 0: I/O ports at c800 [size=256] > Region 2: Memory at cfeff000 (64-bit, prefetchable) [size=4K] > Region 4: Memory at cfef8000 (64-bit, prefetchable) [size=16K] > Expansion ROM at f9de0000 [disabled] [size=128K] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee2000c Data: 41d9 > Capabilities: [70] Express (v2) Endpoint, MSI 01 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, > L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 4096 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency > L0 <512ns, L1 <64us > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis+ > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [ac] MSI-X: Enable- Count=4 Masked- > Vector table: BAR=4 offset=00000000 > PBA: BAR=4 offset=00000800 > Capabilities: [cc] Vital Product Data > Unknown small resource type 00, will not decode more. > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- > Capabilities: [140 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Capabilities: [160 v1] Device Serial Number 03-00-00-00-68-4c-e0-00 > Kernel driver in use: r8169 > > 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. > RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) > Subsystem: Micro-Star International Co., Ltd. Device [1462:7640] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 344 > Region 0: I/O ports at d800 [size=256] > Region 2: Memory at cffff000 (64-bit, prefetchable) [size=4K] > Region 4: Memory at cfff8000 (64-bit, prefetchable) [size=16K] > Expansion ROM at f9ee0000 [disabled] [size=128K] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee2000c Data: 41c9 > Capabilities: [70] Express (v2) Endpoint, MSI 01 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, > L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 4096 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency > L0 <512ns, L1 <64us > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not Supported, TimeoutDis+ > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [ac] MSI-X: Enable- Count=4 Masked- > Vector table: BAR=4 offset=00000000 > PBA: BAR=4 offset=00000800 > Capabilities: [cc] Vital Product Data > Unknown small resource type 00, will not decode more. > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- > Capabilities: [140 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Capabilities: [160 v1] Device Serial Number 04-00-00-00-68-4c-e0-00 > Kernel driver in use: r8169 > > 0a:00.0 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 28 > Region 0: Memory at f9ff8000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Kernel driver in use: xen-pciback > > 0a:00.1 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 28 > Region 0: Memory at f9ff9000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 0a:00.2 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin B routed to IRQ 29 > Region 0: Memory at f9ffa000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 0a:00.3 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin B routed to IRQ 29 > Region 0: Memory at f9ffb000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 0a:00.4 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 30 > Region 0: Memory at f9ffc000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 0a:00.5 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 30 > Region 0: Memory at f9ffd000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 0a:00.6 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin D routed to IRQ 31 > Region 0: Memory at f9ffe000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 0a:00.7 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4???Port USB > 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI]) > Subsystem: Device [a000:4000] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Interrupt: pin D routed to IRQ 31 > Region 0: Memory at f9fff000 (32-bit, non-prefetchable) [disabled] > [size=4K] > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [80] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s > unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <64ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- > DLActive- BWMgmt- ABWMgmt- > Kernel driver in use: xen-pciback > > 0b:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce > 8400 GS] [10de:06e4] (rev a1) (prog-if 00 [VGA controller]) > Subsystem: ASUSTeK Computer Inc. Device [1043:8266] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 24 > Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] > Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M] > Region 5: I/O ports at e800 [size=128] > Expansion ROM at fe9e0000 [disabled] [size=128K] > Capabilities: [60] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [78] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, > L1 <4us > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency > L0 <512ns, L1 <1us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Capabilities: [128 v1] Power Budgeting <?> > Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 > Len=024 <?> > > 00 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > (XEN) Processor #1 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > (XEN) Processor #2 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > (XEN) Processor #3 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > (XEN) Processor #4 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > (XEN) Processor #5 0:10 APIC version 16 > (XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 > (XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) > (XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs > (XEN) ACPI: HPET id: 0x8300 base: 0xfed00000 > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > (XEN) PCI: Not using MMCONFIG. > (XEN) Table is not found! > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) mapped APIC to ffff82c3ffffe000 (fee00000) > (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000) > (XEN) mapped IOAPIC to ffff82c3ffffc000 (fec20000) > (XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 3200.185 MHz processor. > (XEN) Initing memory sharing. > (XEN) AMD Fam10h machine check reporting enabled > (XEN) AMD-Vi: Found MSI capability block > (XEN) AMD-Vi: ACPI Table: > (XEN) AMD-Vi: Signature IVRS > (XEN) AMD-Vi: Length 0x100 > (XEN) AMD-Vi: Revision 0x1 > (XEN) AMD-Vi: CheckSum 0xc3 > (XEN) AMD-Vi: OEM_Id AMD > (XEN) AMD-Vi: OEM_Table_Id RD890S > (XEN) AMD-Vi: OEM_Revision 0x202031 > (XEN) AMD-Vi: Creator_Id AMD > (XEN) AMD-Vi: Creator_Revision 0x0 > (XEN) AMD-Vi: IVRS Block: > (XEN) AMD-Vi: Type 0x10 > (XEN) AMD-Vi: Flags 0x3e > (XEN) AMD-Vi: Length 0xd0 > (XEN) AMD-Vi: Dev_Id 0x2 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0x0 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x0 -> 0x2 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x10 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xb00 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x18 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0xa00 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0xa00 -> 0xa07 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x28 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x900 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x30 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x800 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x50 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x600 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x0 > (XEN) AMD-Vi: Dev_Id 0x0 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x43 > (XEN) AMD-Vi: Dev_Id 0x708 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x708 -> 0x7ff > (XEN) AMD-Vi: Dev_Id Alias: 0x700 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x58 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0x500 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x500 -> 0x501 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x68 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0x400 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x400 -> 0x407 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x88 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0x90 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x90 -> 0x92 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0x98 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x98 -> 0x9a > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa0 > (XEN) AMD-Vi: Flags 0xd7 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa1 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa3 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa4 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x43 > (XEN) AMD-Vi: Dev_Id 0x300 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x300 -> 0x3ff > (XEN) AMD-Vi: Dev_Id Alias: 0xa4 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa5 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa8 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa9 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x100 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0xb0 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0xb0 -> 0xb2 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x0 > (XEN) AMD-Vi: Dev_Id 0x0 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x48 > (XEN) AMD-Vi: Dev_Id 0x0 > (XEN) AMD-Vi: Flags 0xd7 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x48 > (XEN) AMD-Vi: Dev_Id 0x0 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Add device table entry: device id = 0x0000, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0001, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0002, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0010, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0018, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0028, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0030, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0050, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0058, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0068, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0088, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0090, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0091, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0092, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0098, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0099, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x009a, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a0, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a1, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a3, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a4, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a5, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a8, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a9, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00b0, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00b1, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00b2, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0100, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0400, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0401, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0402, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0403, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0404, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0405, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0406, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0407, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0500, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0501, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0600, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0700, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0800, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0900, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a00, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a01, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a02, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a03, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a04, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a05, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a06, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a07, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0b00, interupt table = > 0x24dec4000 > (XEN) AMD-Vi: IOMMU 0 Enabled. > (XEN) I/O virtualisation enabled > (XEN) - Dom0 mode: Relaxed > (XEN) Getting VERSION: 80050010 > (XEN) Getting VERSION: 80050010 > (XEN) Getting ID: 0 > (XEN) Getting LVT0: 700 > (XEN) Getting LVT1: 400 > (XEN) enabled ExtINT on CPU#0 > (XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000 > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) init IO_APIC IRQs > (XEN) IO-APIC (apicid-pin) 6-0, 6-16, 6-17, 6-18, 6-19, 6-20, 6-21, 6-22, > 6-23, 7-0, 7-1, 7-2, 7-3, 7-4, 7-5, 7-6, 7-7, 7-8, 7-9, 7-10, 7-11, 7-12, > 7-13, 7-14, 7-15, 7-16, 7-17, 7-18, 7-19, 7-20, 7-21, 7-22, 7-23, 7-24, 7-25, > 7-26, 7-27, 7-28, 7-29, 7-30, 7-31 not connected. > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) number of MP IRQ sources: 15. > (XEN) number of IO-APIC #6 registers: 24. > (XEN) number of IO-APIC #7 registers: 32. > (XEN) testing the IO APIC....................... > (XEN) IO APIC #6...... > (XEN) .... register #00: 06000000 > (XEN) ....... : physical APIC id: 06 > (XEN) ....... : Delivery Type: 0 > (XEN) ....... : LTS : 0 > (XEN) .... register #01: 00178021 > (XEN) ....... : max redirection entries: 0017 > (XEN) ....... : PRQ implemented: 1 > (XEN) ....... : IO APIC version: 0021 > (XEN) .... register #02: 06000000 > (XEN) ....... : arbitration: 06 > (XEN) .... register #03: 07000000 > (XEN) ....... : Boot DT : 0 > (XEN) .... IRQ redirection table: > (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > (XEN) 00 000 00 1 0 0 0 0 0 0 00 > (XEN) 01 001 01 0 0 0 0 0 1 1 30 > (XEN) 02 001 01 0 0 0 0 0 1 1 F0 > (XEN) 03 001 01 0 0 0 0 0 1 1 38 > (XEN) 04 001 01 0 0 0 0 0 1 1 F1 > (XEN) 05 001 01 0 0 0 0 0 1 1 40 > (XEN) 06 001 01 0 0 0 0 0 1 1 48 > (XEN) 07 001 01 0 0 0 0 0 1 1 50 > (XEN) 08 001 01 0 0 0 0 0 1 1 58 > (XEN) 09 001 01 1 1 0 1 0 1 1 60 > (XEN) 0a 001 01 0 0 0 0 0 1 1 68 > (XEN) 0b 001 01 0 0 0 0 0 1 1 70 > (XEN) 0c 001 01 0 0 0 0 0 1 1 78 > (XEN) 0d 001 01 0 0 0 0 0 1 1 88 > (XEN) 0e 001 01 0 0 0 0 0 1 1 90 > (XEN) 0f 001 01 0 0 0 0 0 1 1 98 > (XEN) 10 000 00 1 0 0 0 0 0 0 00 > (XEN) 11 000 00 1 0 0 0 0 0 0 00 > (XEN) 12 000 00 1 0 0 0 0 0 0 00 > (XEN) 13 000 00 1 0 0 0 0 0 0 00 > (XEN) 14 000 00 1 0 0 0 0 0 0 00 > (XEN) 15 000 00 1 0 0 0 0 0 0 00 > (XEN) 16 000 00 1 0 0 0 0 0 0 00 > (XEN) 17 000 00 1 0 0 0 0 0 0 00 > (XEN) IO APIC #7...... > (XEN) .... register #00: 07000000 > (XEN) ....... : physical APIC id: 07 > (XEN) ....... : Delivery Type: 0 > (XEN) ....... : LTS : 0 > (XEN) .... register #01: 001F8021 > (XEN) ....... : max redirection entries: 001F > (XEN) ....... : PRQ implemented: 1 > (XEN) ....... : IO APIC version: 0021 > (XEN) .... register #02: 00000000 > (XEN) ....... : arbitration: 00 > (XEN) .... IRQ redirection table: > (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > (XEN) 00 000 00 1 0 0 0 0 0 0 00 > (XEN) 01 000 00 1 0 0 0 0 0 0 00 > (XEN) 02 000 00 1 0 0 0 0 0 0 00 > (XEN) 03 000 00 1 0 0 0 0 0 0 00 > (XEN) 04 000 00 1 0 0 0 0 0 0 00 > (XEN) 05 000 00 1 0 0 0 0 0 0 00 > (XEN) 06 000 00 1 0 0 0 0 0 0 00 > (XEN) 07 000 00 1 0 0 0 0 0 0 00 > (XEN) 08 000 00 1 0 0 0 0 0 0 00 > (XEN) 09 000 00 1 0 0 0 0 0 0 00 > (XEN) 0a 000 00 1 0 0 0 0 0 0 00 > (XEN) 0b 000 00 1 0 0 0 0 0 0 00 > (XEN) 0c 000 00 1 0 0 0 0 0 0 00 > (XEN) 0d 000 00 1 0 0 0 0 0 0 00 > (XEN) 0e 000 00 1 0 0 0 0 0 0 00 > (XEN) 0f 000 00 1 0 0 0 0 0 0 00 > (XEN) 10 000 00 1 0 0 0 0 0 0 00 > (XEN) 11 000 00 1 0 0 0 0 0 0 00 > (XEN) 12 000 00 1 0 0 0 0 0 0 00 > (XEN) 13 000 00 1 0 0 0 0 0 0 00 > (XEN) 14 000 00 1 0 0 0 0 0 0 00 > (XEN) 15 000 00 1 0 0 0 0 0 0 00 > (XEN) 16 000 00 1 0 0 0 0 0 0 00 > (XEN) 17 000 00 1 0 0 0 0 0 0 00 > (XEN) 18 000 00 1 0 0 0 0 0 0 00 > (XEN) 19 000 00 1 0 0 0 0 0 0 00 > (XEN) 1a 000 00 1 0 0 0 0 0 0 00 > (XEN) 1b 000 00 1 0 0 0 0 0 0 00 > (XEN) 1c 000 00 1 0 0 0 0 0 0 00 > (XEN) 1d 000 00 1 0 0 0 0 0 0 00 > (XEN) 1e 000 00 1 0 0 0 0 0 0 00 > (XEN) 1f 000 00 1 0 0 0 0 0 0 00 > (XEN) Using vector-based indexing > (XEN) IRQ to pin mappings: > (XEN) IRQ240 -> 0:2 > (XEN) IRQ48 -> 0:1 > (XEN) IRQ56 -> 0:3 > (XEN) IRQ241 -> 0:4 > (XEN) IRQ64 -> 0:5 > (XEN) IRQ72 -> 0:6 > (XEN) IRQ80 -> 0:7 > (XEN) IRQ88 -> 0:8 > (XEN) IRQ96 -> 0:9 > (XEN) IRQ104 -> 0:10 > (XEN) IRQ112 -> 0:11 > (XEN) IRQ120 -> 0:12 > (XEN) IRQ136 -> 0:13 > (XEN) IRQ144 -> 0:14 > (XEN) IRQ152 -> 0:15 > (XEN) .................................... done. > (XEN) Using local APIC timer interrupts. > (XEN) calibrating APIC timer ... > (XEN) ..... CPU clock speed is 3200.1583 MHz. > (XEN) ..... host bus clock speed is 200.0097 MHz. > (XEN) ..... bus_scale = 0x0000CCD7 > (XEN) [2011-06-21 13:18:29] Platform timer is 14.318MHz HPET > (XEN) [2011-06-21 13:18:29] Allocated console ring of 64 KiB. > (XEN) [2011-06-21 13:18:29] HVM: ASIDs enabled. > (XEN) [2011-06-21 13:18:29] SVM: Supported advanced features: > (XEN) [2011-06-21 13:18:29] - Nested Page Tables (NPT) > (XEN) [2011-06-21 13:18:29] - Last Branch Record (LBR) Virtualisation > (XEN) [2011-06-21 13:18:29] - Next-RIP Saved on #VMEXIT > (XEN) [2011-06-21 13:18:29] - Pause-Intercept Filter > (XEN) [2011-06-21 13:18:29] HVM: SVM enabled > (XEN) [2011-06-21 13:18:29] HVM: Hardware Assisted Paging detected. > (XEN) [2011-06-21 13:18:28] masked ExtINT on CPU#1 > (XEN) [2011-06-21 13:18:28] masked ExtINT on CPU#2 > (XEN) [2011-06-21 13:18:28] masked ExtINT on CPU#3 > (XEN) [2011-06-21 13:18:28] masked ExtINT on CPU#4 > (XEN) [2011-06-21 13:18:28] masked ExtINT on CPU#5 > (XEN) [2011-06-21 13:18:29] Brought up 6 CPUs > (XEN) [2011-06-21 13:18:29] HPET\047s MSI mode hasn\047t been supported when > Interrupt Remapping is enabled. > (XEN) [2011-06-21 13:18:29] ACPI sleep modes: S3 > (XEN) [2011-06-21 13:18:29] MCA: Use hw thresholding to adjust polling > frequency > (XEN) [2011-06-21 13:18:29] mcheck_poll: Machine check polling timer started. > (XEN) [2011-06-21 13:18:29] Xenoprofile: Failed to setup IBS LVT offset, > IBSCTL = 0xffffffff > (XEN) [2011-06-21 13:18:29] *** LOADING DOMAIN 0 *** > (XEN) [2011-06-21 13:18:29] elf_parse_binary: phdr: paddr=0x1000000 > memsz=0xa5d000 > (XEN) [2011-06-21 13:18:29] elf_parse_binary: phdr: paddr=0x1a5d000 > memsz=0xc0d40 > (XEN) [2011-06-21 13:18:29] elf_parse_binary: phdr: paddr=0x1b1e000 > memsz=0xd60 > (XEN) [2011-06-21 13:18:29] elf_parse_binary: phdr: paddr=0x1b1f000 > memsz=0x12a80 > (XEN) [2011-06-21 13:18:29] elf_parse_binary: phdr: paddr=0x1b32000 > memsz=0x2db000 > (XEN) [2011-06-21 13:18:29] elf_parse_binary: memory: 0x1000000 -> 0x1e0d000 > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: GUEST_OS = "linux" > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: ENTRY = 0xffffffff81b32200 > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: HYPERCALL_PAGE = > 0xffffffff81001000 > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: FEATURES = > "!writable_page_tables|pae_pgdir_above_4gb" > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: PAE_MODE = "yes" > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: LOADER = "generic" > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: unknown xen elf note (0xd) > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: HV_START_LOW = > 0xffff800000000000 > (XEN) [2011-06-21 13:18:29] elf_xen_parse_note: PADDR_OFFSET = 0x0 > (XEN) [2011-06-21 13:18:29] elf_xen_addr_calc_check: addresses: > (XEN) [2011-06-21 13:18:29] virt_base = 0xffffffff80000000 > (XEN) [2011-06-21 13:18:29] elf_paddr_offset = 0x0 > (XEN) [2011-06-21 13:18:29] virt_offset = 0xffffffff80000000 > (XEN) [2011-06-21 13:18:29] virt_kstart = 0xffffffff81000000 > (XEN) [2011-06-21 13:18:29] virt_kend = 0xffffffff81e0d000 > (XEN) [2011-06-21 13:18:29] virt_entry = 0xffffffff81b32200 > (XEN) [2011-06-21 13:18:29] p2m_base = 0xffffffffffffffff > (XEN) [2011-06-21 13:18:29] Xen kernel: 64-bit, lsb, compat32 > (XEN) [2011-06-21 13:18:29] Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 > -> 0x1e0d000 > (XEN) [2011-06-21 13:18:29] PHYSICAL MEMORY ARRANGEMENT: > (XEN) [2011-06-21 13:18:29] Dom0 alloc.: > 0000000244000000->0000000248000000 (177718 pages to be allocated) > (XEN) [2011-06-21 13:18:29] Init. ramdisk: 000000024f636000->0000000250000000 > (XEN) [2011-06-21 13:18:29] VIRTUAL MEMORY ARRANGEMENT: > (XEN) [2011-06-21 13:18:29] Loaded kernel: ffffffff81000000->ffffffff81e0d000 > (XEN) [2011-06-21 13:18:29] Init. ramdisk: ffffffff81e0d000->ffffffff827d7000 > (XEN) [2011-06-21 13:18:29] Phys-Mach map: ffffffff827d7000->ffffffff82957000 > (XEN) [2011-06-21 13:18:29] Start info: ffffffff82957000->ffffffff829574b4 > (XEN) [2011-06-21 13:18:29] Page tables: ffffffff82958000->ffffffff82971000 > (XEN) [2011-06-21 13:18:29] Boot stack: ffffffff82971000->ffffffff82972000 > (XEN) [2011-06-21 13:18:29] TOTAL: ffffffff80000000->ffffffff82c00000 > (XEN) [2011-06-21 13:18:29] ENTRY ADDRESS: ffffffff81b32200 > (XEN) [2011-06-21 13:18:29] Dom0 has maximum 6 VCPUs > (XEN) [2011-06-21 13:18:29] elf_load_binary: phdr 0 at 0xffffffff81000000 -> > 0xffffffff81a5d000 > (XEN) [2011-06-21 13:18:29] elf_load_binary: phdr 1 at 0xffffffff81a5d000 -> > 0xffffffff81b1dd40 > (XEN) [2011-06-21 13:18:29] elf_load_binary: phdr 2 at 0xffffffff81b1e000 -> > 0xffffffff81b1ed60 > (XEN) [2011-06-21 13:18:29] elf_load_binary: phdr 3 at 0xffffffff81b1f000 -> > 0xffffffff81b31a80 > (XEN) [2011-06-21 13:18:29] elf_load_binary: phdr 4 at 0xffffffff81b32000 -> > 0xffffffff81bf0000 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0000, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0002, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0010, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0018, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0028, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0030, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0050, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0058, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0068, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0088, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0090, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0092, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0098, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x009a, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x00a0, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x00a1, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x00a3, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x00a4, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x00a5, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x00a8, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x00b0, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x00b2, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: No iommu for device 00:18.0 > (XEN) [2011-06-21 13:18:30] AMD-Vi: No iommu for device 00:18.1 > (XEN) [2011-06-21 13:18:30] AMD-Vi: No iommu for device 00:18.2 > (XEN) [2011-06-21 13:18:30] AMD-Vi: No iommu for device 00:18.3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: No iommu for device 00:18.4 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0400, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0401, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0402, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0403, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0404, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0405, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0406, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0407, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0500, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0501, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0600, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0700, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0800, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0900, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0a00, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0a01, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0a02, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0a03, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0a04, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0a05, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0a06, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0a07, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] AMD-Vi: Setup I/O page table: device id = 0x0b00, > root table = 0x24818a000, domain = 0, paging mode = 3 > (XEN) [2011-06-21 13:18:30] Scrubbing Free RAM: > .........................................................................done. > (XEN) [2011-06-21 13:18:32] Xen trace buffers: disabled > (XEN) [2011-06-21 13:18:32] Std. Loglevel: All > (XEN) [2011-06-21 13:18:32] Guest Loglevel: All > (XEN) [2011-06-21 13:18:32] Xen is relinquishing VGA console. > (XEN) [2011-06-21 13:18:32] *** Serial input -> DOM0 (type \047CTRL-a\047 > three times to switch input to Xen) > (XEN) [2011-06-21 13:18:32] Freed 216kB init memory. > (XEN) [2011-06-21 13:18:32] \047u\047 pressed -> dumping numa info > (now-0x0:DE8FA4C8) > (XEN) [2011-06-21 13:18:32] idx0 -> NODE0 start->0 size->2424832 > (XEN) [2011-06-21 13:18:32] phys_to_nid(0000000000001000) -> 0 should be 0 > (XEN) [2011-06-21 13:18:32] CPU0 -> NODE0 > (XEN) [2011-06-21 13:18:32] CPU1 -> NODE0 > (XEN) [2011-06-21 13:18:32] CPU2 -> NODE0 > (XEN) [2011-06-21 13:18:32] CPU3 -> NODE0 > (XEN) [2011-06-21 13:18:32] CPU4 -> NODE0 > (XEN) [2011-06-21 13:18:32] CPU5 -> NODE0 > (XEN) [2011-06-21 13:18:32] Memory location of each domain: > (XEN) [2011-06-21 13:18:32] Domain 0 (total: 196608): > (XEN) [2011-06-21 13:18:32] Node 0: 196608 > (XEN) [2011-06-21 13:18:33] IOAPIC[0]: Set PCI routing entry (6-9 -> 0x60 -> > IRQ 9 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:33] traps.c:2388:d0 Domain attempted WRMSR > 00000000c0010004 from 0x0000fff0f9fb1f0c to 0x000000000000abcd. > (XEN) [2011-06-21 13:18:33] PCI add device 00:00.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:00.2 > (XEN) [2011-06-21 13:18:33] PCI add device 00:02.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:03.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:05.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:06.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:0a.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:0b.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:0d.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:11.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:12.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:12.2 > (XEN) [2011-06-21 13:18:33] PCI add device 00:13.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:13.2 > (XEN) [2011-06-21 13:18:33] PCI add device 00:14.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:14.1 > (XEN) [2011-06-21 13:18:33] PCI add device 00:14.3 > (XEN) [2011-06-21 13:18:33] PCI add device 00:14.4 > (XEN) [2011-06-21 13:18:33] PCI add device 00:14.5 > (XEN) [2011-06-21 13:18:33] PCI add device 00:15.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:16.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:16.2 > (XEN) [2011-06-21 13:18:33] PCI add device 00:18.0 > (XEN) [2011-06-21 13:18:33] PCI add device 00:18.1 > (XEN) [2011-06-21 13:18:33] PCI add device 00:18.2 > (XEN) [2011-06-21 13:18:33] PCI add device 00:18.3 > (XEN) [2011-06-21 13:18:33] PCI add device 00:18.4 > (XEN) [2011-06-21 13:18:33] PCI add device 0b:00.0 > (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.0 > (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.1 > (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.2 > (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.3 > (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.4 > (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.5 > (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.6 > (XEN) [2011-06-21 13:18:33] PCI add device 0a:00.7 > (XEN) [2011-06-21 13:18:33] PCI add device 09:00.0 > (XEN) [2011-06-21 13:18:33] PCI add device 08:00.0 > (XEN) [2011-06-21 13:18:33] PCI add device 06:00.0 > (XEN) [2011-06-21 13:18:33] PCI add device 07:01.0 > (XEN) [2011-06-21 13:18:33] PCI add device 07:01.1 > (XEN) [2011-06-21 13:18:33] PCI add device 07:01.2 > (XEN) [2011-06-21 13:18:33] PCI add device 05:00.0 > (XEN) [2011-06-21 13:18:33] PCI add device 05:00.1 > (XEN) [2011-06-21 13:18:33] PCI add device 04:00.0 > (XEN) [2011-06-21 13:18:33] PCI add device 04:00.1 > (XEN) [2011-06-21 13:18:33] PCI add device 04:00.2 > (XEN) [2011-06-21 13:18:33] PCI add device 04:00.3 > (XEN) [2011-06-21 13:18:33] PCI add device 04:00.4 > (XEN) [2011-06-21 13:18:33] PCI add device 04:00.5 > (XEN) [2011-06-21 13:18:33] PCI add device 04:00.6 > (XEN) [2011-06-21 13:18:33] PCI add device 04:00.7 > (XEN) [2011-06-21 13:18:33] PCI add device 03:06.0 > (XEN) [2011-06-21 13:18:33] IOAPIC[0]: Set PCI routing entry (6-8 -> 0x58 -> > IRQ 8 Mode:0 Active:0) > (XEN) [2011-06-21 13:18:33] IOAPIC[0]: Set PCI routing entry (6-13 -> 0x88 -> > IRQ 13 Mode:0 Active:0) > (XEN) [2011-06-21 13:18:33] IOAPIC[1]: Set PCI routing entry (7-28 -> 0xa0 -> > IRQ 52 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:33] IOAPIC[1]: Set PCI routing entry (7-29 -> 0xa8 -> > IRQ 53 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:33] IOAPIC[1]: Set PCI routing entry (7-30 -> 0xb0 -> > IRQ 54 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:33] IOAPIC[0]: Set PCI routing entry (6-16 -> 0xb8 -> > IRQ 16 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[0]: Set PCI routing entry (6-22 -> 0x41 -> > IRQ 22 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-19 -> 0x49 -> > IRQ 43 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-18 -> 0x51 -> > IRQ 42 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-17 -> 0x59 -> > IRQ 41 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-16 -> 0x61 -> > IRQ 40 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-9 -> 0x69 -> > IRQ 33 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-8 -> 0x71 -> > IRQ 32 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-22 -> 0x79 -> > IRQ 46 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-21 -> 0x81 -> > IRQ 45 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-20 -> 0x89 -> > IRQ 44 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-7 -> 0x91 -> > IRQ 31 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-6 -> 0x99 -> > IRQ 30 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-5 -> 0xa1 -> > IRQ 29 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-4 -> 0xa9 -> > IRQ 28 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:34] IOAPIC[1]: Set PCI routing entry (7-0 -> 0xb1 -> > IRQ 24 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:35] IOAPIC[0]: Set PCI routing entry (6-19 -> 0xb9 -> > IRQ 19 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:35] IOAPIC[1]: Set PCI routing entry (7-27 -> 0xd1 -> > IRQ 51 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:35] IOAPIC[0]: Set PCI routing entry (6-17 -> 0x22 -> > IRQ 17 Mode:1 Active:1) > (XEN) [2011-06-21 13:18:35] IOAPIC[0]: Set PCI routing entry (6-18 -> 0x2a -> > IRQ 18 Mode:1 Active:1) > (XEN) [2011-06-21 13:22:24] traps.c:2388:d1 Domain attempted WRMSR > 00000000c0010004 from 0x0000787110fb4e0f to 0x000000000000abcd. > (XEN) [2011-06-21 13:22:35] traps.c:2388:d2 Domain attempted WRMSR > 00000000c0010004 from 0x0000fff0f9fb1f0c to 0x000000000000abcd. > (XEN) [2011-06-21 13:22:46] traps.c:2388:d3 Domain attempted WRMSR > 00000000c0010004 from 0x0000787110fb4e0f to 0x000000000000abcd. > (XEN) [2011-06-21 13:22:56] traps.c:2388:d4 Domain attempted WRMSR > 00000000c0010004 from 0x0000eff439de7900 to 0x000000000000abcd. > (XEN) [2011-06-21 13:23:07] traps.c:2388:d5 Domain attempted WRMSR > 00000000c0010004 from 0x0000eff439de7900 to 0x000000000000abcd. > (XEN) [2011-06-21 13:23:19] traps.c:2388:d6 Domain attempted WRMSR > 00000000c0010004 from 0x0000eff439de7900 to 0x000000000000abcd. > (XEN) [2011-06-21 13:23:45] traps.c:2388:d7 Domain attempted WRMSR > 00000000c0010004 from 0x00008076c0b94065 to 0x000000000000abcd. > (XEN) [2011-06-21 13:23:57] traps.c:2388:d8 Domain attempted WRMSR > 00000000c0010004 from 0x0000fff0f9fb1f0c to 0x000000000000abcd. > (XEN) [2011-06-21 13:24:13] traps.c:2388:d9 Domain attempted WRMSR > 00000000c0010004 from 0x000000b68e28229f to 0x000000000000abcd. > (XEN) [2011-06-21 13:24:33] traps.c:2388:d11 Domain attempted WRMSR > 00000000c0010004 from 0x00008076c0b94065 to 0x000000000000abcd. > (XEN) [2011-06-21 13:24:52] traps.c:2388:d13 Domain attempted WRMSR > 00000000c0010004 from 0x0000eff439de7900 to 0x000000000000abcd. > (XEN) [2011-06-21 13:25:28] traps.c:2388:d15 Domain attempted WRMSR > 00000000c0010004 from 0x0000787110fb4e0f to 0x000000000000abcd. > (XEN) [2011-06-21 13:25:41] traps.c:2388:d16 Domain attempted WRMSR > 00000000c0010004 from 0x0000fff0f9fb1f0c to 0x000000000000abcd. > (XEN) [2011-06-21 13:25:58] traps.c:2388:d17 Domain attempted WRMSR > 00000000c0010004 from 0x0000eff439de7900 to 0x000000000000abcd. > host : serveerstertje > release : 3.0.0-rc3-xen-konrad-devel-next-20110621+ > version : #2 SMP Tue Jun 21 14:03:13 CEST 2011 > machine : x86_64 > nr_cpus : 6 > nr_nodes : 1 > cores_per_socket : 6 > threads_per_core : 1 > cpu_mhz : 3200 > hw_caps : > 178bf3ff:efd3fbff:00000000:00001310:00802001:00000000:000037ff:00000000 > virt_caps : hvm hvm_directio > total_memory : 8191 > free_memory : 2954 > free_cpus : 0 > xen_major : 4 > xen_minor : 1 > xen_extra : .1 > xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 > hvm-3.0-x86_32p hvm-3.0-x86_64 > xen_scheduler : credit > xen_pagesize : 4096 > platform_params : virt_start=0xffff800000000000 > xen_changeset : Tue Jun 14 14:02:48 2011 +0100 23079:73a8061b01f1 > xen_commandline : dom0_mem=768M loglvl=all loglvl_guest=all > console_timestamps vga=gfx-1280x1024x32 cpuidle cpufreq=xen noreboot debug > lapic=debug apic_verbosity=debug apic=debug acpi_enforce_resources=lax > iommu=on,amd-iommu-debug amd_iommu=on amd-iommu-debug com1=115200,8n1 > console=vga,com1 > cc_compiler : gcc version 4.4.5 (Debian 4.4.5-8) > cc_compile_by : root > cc_compile_domain : dyndns.org > cc_compile_date : Thu Jun 16 11:28:46 CEST 2011 > xend_config_format : 4 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |