[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Cannot load latest 2.6.32.10 kernel on AMD quad-core



On Mon, Apr 26, 2010 at 12:12:13AM -0400, Gerry Reno wrote:
> On 04/25/2010 10:10 PM, Gerry Reno wrote:
>> On 04/25/2010 06:15 PM, Gerry Reno wrote:
>>> Gerry Reno wrote:
>>>> Boris Derzhavets wrote:
>>>>> Per Wiki:-
>>>>>
>>>>> 2) If your computer running Xen doesn't have a real physical 
>>>>> serial port you can add a PCI add-on serial card with a DB9 
>>>>> serial connector. This is a good option for many computers.
>>>>>
>>>>> seems to be the cheapest solution. No matter for AMD or Intel.
>>>>> Thanks Pasi once again.
>>>>>
>>>>> Boris.
>>>>>
>>>>>
>>>>>
>>>>> -
>>>>>
>>>> I'll check if there are any open slots and see if I can find an  
>>>> addon serial card. 
>>> <snip>
>>>
>>> Well, I could not find even one local electronics/computer store that 
>>> carried a serial port card.  Had to order it online which will take  
>>> some time.  Maybe I can capture a video of the boot sequence.
>>>
>>> -Gerry
>>>
>> I tried to capture some video of the pv_ops dom0 2.6.32.10 boot  
>> sequence problem on Gigabyte AMD hardware and I posted it on youtube.   
>> Here's the link:  http://www.youtube.com/watch?v=OcuwH7S-qZA
>> It was a little fuzzy before the upload but got real fuzzy afterwards.  
>> But I think you can make out the critical parts.
>>
>> -Gerry
>
> I uploaded another take and it came out a little better:   
> http://www.youtube.com/watch?v=n7fW7yjrIEM
>

You seem to be missing most of the dom0 linux kernel boot messages..

Please paste your grub.conf.

-- Pasi


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.