[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Cannot load latest 2.6.32.10 kernel on AMD quad-core



On 04/25/2010 06:15 PM, Gerry Reno wrote:
Gerry Reno wrote:
Boris Derzhavets wrote:
Per Wiki:-

2) If your computer running Xen doesn't have a real physical serial port you can add a PCI add-on serial card with a DB9 serial connector. This is a good option for many computers.

seems to be the cheapest solution. No matter for AMD or Intel.
Thanks Pasi once again.

Boris.



-

I'll check if there are any open slots and see if I can find an addon serial card.
<snip>

Well, I could not find even one local electronics/computer store that carried a serial port card. Had to order it online which will take some time. Maybe I can capture a video of the boot sequence.

-Gerry

I tried to capture some video of the pv_ops dom0 2.6.32.10 boot sequence problem on Gigabyte AMD hardware and I posted it on youtube. Here's the link: http://www.youtube.com/watch?v=OcuwH7S-qZA It was a little fuzzy before the upload but got real fuzzy afterwards. But I think you can make out the critical parts.

-Gerry



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.