On 04/25/2010 07:18 PM, Mike Viau wrote:
>
Sun, 25 Apr 2010 09:10:11 -0700 <bderzhavets@xxxxxxxxx> wrote:
>>But besides that, the output from the kernel over ttyUSB0 still doesn't look right. You should be able to get some kernel output I would think.
>Yes, i have COM1 on both boards. No problems.
>Boris.
Just to clarify, do you really use a ttyUSB0 (via an usb to serial
adapter) and it works on you kernel command line to log messages or do
just use your ttyUSB serial port (in dom0 for example) to console into
your Linux machine?
Thanks.
-M
|
Not sure who you're addressing, but yes I have a USB-Serial adapter and
ttyUSB0 I have put on the kernel command line, BUT it isn't working
very well. All it shows in minicom right now is
AT+GCAP
AT+GCAP
AT+GCAP
when the system boots up.
-Gerry
|
