[SPAM] Re[2]: [Xen-devel] [xen 3.5-unstable] passthrough of pci USB card fails

[Sander Eikelenboom <linux@xxxxxxxxxxxxxx>]

Hello Dexuan,

From what i read, i should replace both pciback and reassigndev with the
new guestdev parameter. And it should accept the same syntax as
reassigndev.

So i tried to boot my Dom0 with:
module          /boot/vmlinuz-2.6.18.8-xen root=/dev/sda1 ro log_buf_len=65662 
guestdev=01:00.0,01:00.1,01:00.2

It seizes the pci devices, but creating the HVM domU still fails with:
Error: pci: 0000:01:00.2: non-page-aligned MMIO BAR found.

Any more things I could try ?

-- Sander


Attachted:
xm info
xm dmesg
dmesg
xend.log
lspci -vvvknn





Wednesday, July 22, 2009, 5:02:13 AM, you wrote:

> The boot parameters changed.

> I think you should have a look at
> http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev=reassign_resources 

> -- Dexuan

> -----Original Message-----
> From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Sander Eikelenboom
> Sent: 2009?7?21? 20:17
> To: xen-devel@
> Subject: [Xen-devel] [xen 3.5-unstable] passthrough of pci USB card fails

> Hi,

> I'm trying to passthrough a pci USB card to a DomU (HVM).
> Although pciback seems to seize the device with all functions as seen in
> the dmesg output, they don't appear using "xm pci-list-assignable-devices".

> When trying to passthrough to a HVM (with VT-D enabled) it stops creating
> the domain and complains about:
> VmError: pci: 0000:01:00.2: non-page-aligned MMIO BAR found.

> From what I read, booting the xen hypervisor with "reassigndev=" should
> solve the non-page-aligned issues, but apparently it doesn't in this case.
> Also added them to xend-pci-persmissive.

> Is there another boot-option/way to reassign the device ?

> Regards,

> Sander


> Attached is the output from:
> xm info
> xm dmesg
> dmesg
> lspci -vvvnnk
> ls /sys/bus/pci/drivers/pciback
> /var/log/xen/xend log with the start of a HVM domain
> winhvm.cfg (config file of the hvm domain)





-- 
Best regards,
 Sander                            mailto:linux@xxxxxxxxxxxxxx

Attachment: dmesg.log
Description: Text document

Attachment: lspci.log
Description: Text document

Attachment: xend.log
Description: Text document

Attachment: xm-dmesg.log
Description: Text document

Attachment: xm-info.log
Description: Text document

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel