[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] xen.git branch reorg / success with 2.6.30-rc3 pv_ops dom0



On Mon, May 18, 2009 at 08:06:26PM +0300, Pasi Kärkkäinen wrote:
> On Mon, May 18, 2009 at 03:57:07PM +0100, Ian Campbell wrote:
> > Hi Pasi,
> > 
> > On Thu, 2009-05-07 at 13:24 -0400, Pasi Kärkkäinen wrote:
> > > On Wed, May 06, 2009 at 02:51:59PM -0700, Jeremy Fitzhardinge wrote:
> > > > Great!  I'd be interested to know if you're still having HIGHPTE 
> > > > problems.  It may or may not have got fixed.
> > > > 
> > > 
> > > I just tried with CONFIG_HIGHPTE=y but that didn't seem to work:
> > > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/pv_ops-dom0-bootlog-30-xen331-linux-2.6.30-rc3-next-crash-with-highpte.txt
> > > 
> > > (XEN) mm.c:2006:d0 Bad type (saw 28000001 != exp e0000000) for mfn 6b0a6 
> > > (pfn 2c959)
> > > (XEN) mm.c:707:d0 Error getting mfn 6b0a6 (pfn 2c959) from L1 entry 
> > > 000000006b0a6063 for dom0
> > > (XEN) mm.c:3640:d0 ptwr_emulate: could not get_page_from_l1e()
> > 
> > I thought I might have a poke at this, how do you go about reproducing
> > it? I've used your .config and it boots OK -- now I'm trying a kernbench
> > run since I think you mentioned compiling a kernel in domain 0 at one
> > point.
> > 
> 
> I can reproduce it every time like this:
> 
> - boot into pv_ops dom0 kernel
> - run "make bzImage && make modules"
> - wait for the kernel compilation to finish..
> - *crash*, before the compilation finishes, usually within 15-30mins
> 
> > How much RAM does your host have? Are you running 32 or 64 bit
> > hypervisor? Which hypervisor version? From your .config I think your
> > dom0 kernel is 32 bit, right?
> > 
> 
> My host has 2GB of RAM.
> 
> Hypervisor is 32bit PAE, Fedora 11 Xen 3.3.1-11 rpms.
> My dom0 kernel is 32bit PAE aswell.
> 
> grub.conf:
> 
> kernel /xen-3.3.gz dom0_mem=1024M
> module /vmlinuz-2.6.30-rc3-tip root=/dev/sda1 ro
> module /boot/initrd.img-2.6.30-rc3-tip
> 

Hmm, that's the usual grub.conf I use, but for capturing the crash logs I
use:

kernel /xen-3.3.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=19200,8n1 
console=com1
module /vmlinuz-2.6.30-rc3-tip root=/dev/sda1 ro console=hvc0 earlyprintk=xen
module /boot/initrd.img-2.6.30-rc3-tip

And Xen hypervisor is a debug build.

-- Pasi

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.