[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] accessing a char device in xenU



> Is it possible to make a scsi device invisible from xen0 and visilbe in
> xenU (i'm not talking of a whole scsi card but just one device on the card)
> ?

You can't make it invisible in dom0 but you can export it to a domU using the 
standard virtual block device configuration. i.e.:

'phy:/dev/sdb,sdb,w'

Cheers,
Mark

> > With a dvice like a tape you'd presumably only want to let one domain
> > access it at a time, perhaps with a hard interlock as to which tape is
> > in the drive. Fortunately, the bandwidth is pretty low, so it's probably
> > easiest to setup a network based soloution rather than doing something
> > Xen specific. I presume such daemons already exist (?)
>
> Sure something like amanda should work ...
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/xen-devel


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.