[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] etherbridge bottleneck



" We have no problem getting 900Mb/s in/out of xenU's and the wire on our
" 2.4GHz Xeon systems (regardless of whether using uniprocessor, SMP or
" hyperthreading).

Hmmm, I'm certainly having a problem getting over 500Mbps into xenU.

I ran another set of tests, this time between two
identical Dell 1650s, (one 1.4GHz PIII, 2GB ram, e1000 NICs) directly
connected to a Catalyst 4005. 

Running a 10sec iperf run, I got these bandwidths:
Stock linux-2.4.25 (no patches or network tuning)
        941 Mbps stock -> stock  (identical speed both directions)
        941 Mbps stock -> stock

Running 2.4.27-xen0 on xen-2.0 before starting xend or the network script:
        894 Mbps xen0 -> stock 
        622 Mbps stock -> xen0 

After starting xend, which brought up the bridge:
        734 Mbps xen0 -> stock 
        524 Mbps stock -> xen0

After starting one xenU, xen0 was a touch slower:
        729 Mbps xen0 -> stock 
        515 Mbps stock -> xen0

        530 Mbps xenU -> stock 
        470 Mbps stock -> xenU
        427 Mbps xenU -> xen0
        253 Mbps xen0 -> xenU

After taking the vif off the bridge 
with 'brctl delif xen-br0 vif1.0':
        463 Mbps xenU -> xen0
        312 Mbps xen0 -> xenU



Here is a full acount of boot messages, etc:



+++++++++++++++++++++++++
Stock linux boot messages
+++++++++++++++++++++++++
Linux version 2.4.25-smp (becker@growl) (gcc version 3.3.3 20040125 
(prerelease) (Debian)) #1 SMP Sat Feb 28 19:56:32 EST 2004
BIOS-provided physical RAM map:               
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
 BIOS-e820: 000000007fff0000 - 000000007fffec00 (ACPI data)
 BIOS-e820: 000000007fffec00 - 000000007ffff000 (reserved) 
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.                                 
896MB LOWMEM available.  
found SMP MP-table at 000fe710
hm, page 000fe000 reserved twice.
hm, page 000ff000 reserved twice.
hm, page 000f0000 reserved twice.
On node 0 totalpages: 524272     
zone(0): 4096 pages.        
zone(1): 225280 pages.
zone(2): 294896 pages.
ACPI: RSDP (v000 DELL                                      ) @ 0x000fdc60
ACPI: RSDT (v001 DELL   PE1650   0x00000001 MSFT 0x0100000a) @ 0x000fdc74
ACPI: FADT (v001 DELL   PE1650   0x00000001 MSFT 0x0100000a) @ 0x000fdca4
ACPI: MADT (v001 DELL   PE1650   0x00000001 MSFT 0x0100000a) @ 0x000fdd18
ACPI: SPCR (v001 DELL   PE1650   0x00000001 MSFT 0x0100000a) @ 0x000fdd82
ACPI: DSDT (v001 DELL   PE1650   0x00000001 MSFT 0x0100000a) @ 0x00000000
ACPI: Local APIC address 0xfee00000                                      
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 17      
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 1                                   
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, IRQ 0-15
ACPI: IOAPIC (id[0x02] address[0xfec01000] global_irq_base[0x10])
IOAPIC[1]: Assigned apic_id 2                                    
IOAPIC[1]: apic_id 2, version 17, address 0xfec01000, IRQ 16-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high edge)   
ACPI BALANCE SET                                            
Using ACPI (MADT) for SMP configuration information
Kernel command line: ip=172.16.4.183:::255.255.252.0:rack099-xen:eth0:off 
root=/dev/sda1 console=tty0 console=ttyS0 -b
Initializing CPU#0                    
Detected 1396.496 MHz processor.
Console: colour VGA+ 80x25      
Calibrating delay loop... 2785.28 BogoMIPS
Memory: 2068540k/2097088k available (2125k kernel code, 28164k reserved, 689k 
data, 364k init, 1179584k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) 
Mount cache hash table entries: 512 (order: 0, 4096 bytes)      
Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) 
CPU: L1 I cache: 16K, L1 D cache: 16K                          
CPU: L2 cache: 512K                  
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.    
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.                    
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel                            
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K                  
Intel machine check reporting enabled on CPU#0.
CPU0: Intel(R) Pentium(R) III CPU family      1400MHz stepping 01
per-CPU timeslice cutoff: 1462.55 usecs.                         
enabled ExtINT on CPU#0                 
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000 
Error: only one processor found.         
ENABLING IO-APIC IRQs           
..TIMER: vector=0x31 pin1=-1 pin2=0
...trying to set up timer (IRQ0) through the 8259A ... 
..... (found pin 0) ...works.                          
Using local APIC timer interrupts.
calibrating APIC timer ...        
..... CPU clock speed is 1396.4558 MHz.
..... host bus clock speed is 132.9956 MHz.
cpu: 0, clocks: 1329956, slice: 664978     
CPU0<T0:1329952,T1:664960,D:14,S:664978,C:1329956>
Waiting on wait_init_idle (map = 0x0)             
All processors have done init_idle   
ACPI: Subsystem revision 20040116 
PCI: PCI BIOS revision 2.10 entry at 0xfc6ce, last bus=2
PCI: Using configuration type 1                         
ACPI: Interpreter enabled      
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S4 S5) 
ACPI: PCI Root Bridge [PCI0] (00:00)   
PCI: Probing PCI hardware (bus 00)  
PCI: Ignoring BAR0-3 of IDE controller 00:0f.1
ACPI: PCI Root Bridge [PCI1] (00:01)          
PCI: Probing PCI hardware (bus 01)  
ACPI: PCI Root Bridge [PCI2] (00:02)
PCI: Probing PCI hardware (bus 02)  
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 11 12 14) 
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKJ] (IRQs 3 4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKK] (IRQs 3 4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKL] (IRQs 3 4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKN] (IRQs 3 4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKO] (IRQs 3 4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 *11 12 14) 
PCI: Probing PCI hardware                                 
ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 11
testing the IO APIC.......................       
                                          

.................................... done.
PCI: Using ACPI for IRQ routing           
PCI: if you experience problems, try using option 'pci=noacpi' or even 
'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket                         
Starting kswapd               
allocated 32 pages and 32 bhs reserved for the highmem bounces
Journalled Block Device driver loaded                         
Detected PS/2 Mouse Port.            
pty: 256 Unix98 ptys configured
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI 
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Intel(R) PRO/1000 Network Driver - version 5.2.20-k1                 
Copyright (c) 1999-2003 Intel Corporation.          
eth0: Intel(R) PRO/1000 Network Connection
eth1: Intel(R) PRO/1000 Network Connection
pcnet32.c:v1.27a 10.02.2002 tsbogend@xxxxxxxxxxxxxxxx
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller at PCI slot 00:0f.1                            
SvrWks CSB5: chipset revision 147              
SvrWks CSB5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive                
hda: Disabling (U)DMA for SAMSUNG CD-ROM SN-124   
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14            
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec aic7899 Ultra160 SCSI adapter>                 
        aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
                                                                
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec aic7899 Ultra160 SCSI adapter>                 
        aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
                                                                
blk: queue f7ba6818, I/O limit 4095Mb (mask 0xffffffff)
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 100, 16bit)
  Vendor: HITACHI   Model: DK32DJ-18MC       Rev: D4D4              
  Type:   Direct-Access                      ANSI SCSI revision: 03
blk: queue f7ba6618, I/O limit 4095Mb (mask 0xffffffff)            
  Vendor: PE/PV     Model: 1x3 SCSI BP       Rev: 0.28 
  Type:   Processor                          ANSI SCSI revision: 02
blk: queue f7ba6e18, I/O limit 4095Mb (mask 0xffffffff)            
scsi0:A:0:0: Tagged Queuing enabled.  Depth 253        
megaraid: v2.10.1 (Release Date: Wed Dec  3 15:34:42 EST 2003)
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0       
SCSI device sda: 35566478 512-byte hdwr sectors (18210 MB)
Partition check:                                          
 sda: sda1 sda2 sda3
Fusion MPT base driver 2.05.11.03
Copyright (c) 1999-2003 LSI Logic Corporation
mptbase: 0 MPT adapters found, 0 installed.  
Fusion MPT SCSI Host driver 2.05.11.03     
NET4: Linux TCP/IP 1.0 for NET4.0     
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex           
IP-Config: Complete:                            
      device=eth0, addr=172.16.4.183, mask=255.255.252.0, gw=255.255.255.255,
     host=rack099-xen, domain=, nis-domain=(none),                           
     bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.                   
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.  
kjournald starting.  Commit interval 5 seconds        
EXT3-fs: recovery complete.                   
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.      
Freeing unused kernel memory: 364k freed     
INIT: version 2.86 booting              

+++++++++++++++++++++++++

+++++++++++++++++++++++++
Xen boot messages
+++++++++++++++++++++++++
kernel /boot/xen.gz dom0_mem=40000 com1=9600,8n1
   [Multiboot-elf, <0x100000:0x3d3d0:0x35170>, shtab=0x173078, entry=0x100000]
module /boot/vmlinuz-2.4.27-xen0 ip=172.16.4.183:::255.255.252.0:rack099-xen:et
h0:off root=/dev/sda1 console=tty0 console=ttyS0
   [Multiboot-module @ 0x174000, 0x3068fc bytes]
boot
 __  __            ____    ___  
 \ \/ /___ _ __   |___ \  / _ \ 
  \  // _ \ '_ \    __) || | | |
  /  \  __/ | | |  / __/ | |_| |
 /_/\_\___|_| |_| |_____(_)___/ 
                                
 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 2.0 (becker@xxxxxxxxxxx) (gcc version 3.3.4 (Debian 
1:3.3.4-6sarge1)) Wed Nov 10 11:15:00 EST 2004
 Latest ChangeSet: information unavailable

(XEN) Initialised 2047MB memory (524272 pages) on a 2047MB machine
(XEN) Xen heap size is 10740KB
(XEN) CPU0: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0383fbff 00000000 00000000 00000000
(XEN) found SMP MP-table at 000fe710
(XEN) Memory Reservation 0xfe710, 4096 bytes
(XEN) Memory Reservation 0xf0000, 4096 bytes
(XEN) ACPI: RSDP (v000 DELL                                      ) @ 0x000fdc60
(XEN) ACPI: RSDT (v001 DELL   PE1650   0x00000001 MSFT 0x0100000a) @ 0x000fdc74
(XEN) ACPI: FADT (v001 DELL   PE1650   0x00000001 MSFT 0x0100000a) @ 0x000fdca4
(XEN) ACPI: MADT (v001 DELL   PE1650   0x00000001 MSFT 0x0100000a) @ 0x000fdd18
(XEN) ACPI: SPCR (v001 DELL   PE1650   0x00000001 MSFT 0x0100000a) @ 0x000fdd82
(XEN) ACPI: DSDT (v001 DELL   PE1650   0x00000001 MSFT 0x0100000a) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 Pentium(tm) Pro APIC version 17
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) Using ACPI for processor (LAPIC) configuration information
(XEN) Intel MultiProcessor Specification v1.4
(XEN)     Virtual Wire compatibility mode.
(XEN) OEM ID: DELL     Product ID: PE 011B      APIC at: 0xFEE00000
(XEN) I/O APIC #1 Version 17 at 0xFEC00000.
(XEN) I/O APIC #2 Version 17 at 0xFEC01000.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) Processors: 1
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) Initializing CPU#0
(XEN) Detected 1396.476 MHz processor.
(XEN) CPU0: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0383fbff 00000000 00000000 00000000
(XEN) CPU0 booted
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) Error: only one processor found.
(XEN) ENABLING IO-APIC IRQs
(XEN) Setting 1 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 1 ... ok.
(XEN) Setting 2 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 2 ... ok.
(XEN) init IO_APIC IRQs
(XEN) ..TIMER: vector=0x41 pin1=2 pin2=0
(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
(XEN) ...trying to set up timer (IRQ0) through the 8259A ... 
(XEN) ..... (found pin 0) ...works.
(XEN) Using local APIC timer interrupts.
(XEN) Calibrating APIC timer for CPU0...
(XEN) ..... CPU speed is 1396.4537 MHz.
(XEN) ..... Bus speed is 132.9955 MHz.
(XEN) ..... bus_scale = 0x00008830
(XEN) Time init:
(XEN) .... System Time: 20000234ns
(XEN) .... cpu_freq:    00000000:533C8BD0
(XEN) .... scale:       00000001:6EA30E07
(XEN) .... Wall Clock:  1100530888s 190000us
(XEN) PCI: PCI BIOS revision 2.10 entry at 0xfc6ce, last bus=2
(XEN) PCI: Using configuration type 1
(XEN) PCI: Probing PCI hardware
(XEN) PCI: Probing PCI hardware (bus 00)
(XEN) PCI: Ignoring BAR0-3 of IDE controller 00:0f.1
(XEN) PCI: Discovered primary peer bus 01 [IRQ]
(XEN) PCI: Discovered primary peer bus 02 [IRQ]
(XEN) PCI: Using IRQ router ServerWorks [1166/0201] at 00:0f.0
(XEN) PCI->APIC IRQ transform: (B1,I2,P0) -> 17
(XEN) PCI->APIC IRQ transform: (B1,I4,P0) -> 16
(XEN) PCI->APIC IRQ transform: (B1,I6,P0) -> 18
(XEN) PCI->APIC IRQ transform: (B1,I6,P1) -> 19
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found: 
'GUEST_OS=linux,GUEST_VER=2.4,XEN_VER=2.0,VIRT_BASE=0xC0000000'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Kernel image:  02800000->02b068fc
(XEN)  Initrd image:  00000000->00000000
(XEN)  Dom0 alloc.:   02c00000->05310000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: c0100000->c0453e34
(XEN)  Init. ramdisk: c0454000->c0454000
(XEN)  Phys-Mach map: c0454000->c045dc40
(XEN)  Page tables:   c045e000->c0461000
(XEN)  Start info:    c0461000->c0462000
(XEN)  Boot stack:    c0462000->c0463000
(XEN)  TOTAL:         c0000000->c0800000
(XEN)  ENTRY ADDRESS: c0100000
(XEN) Scrubbing DOM0 RAM: .done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to 
Xen).
(XEN) Scrubbing Free RAM: .....................done.

+++++++++++++++++++++++++

+++++++++++++++++++++++++
Xen-0 boot messages
+++++++++++++++++++++++++
Linux version 2.4.27-xen0 (becker@pant) (gcc version 3.3.4 (Debian 
1:3.3.4-6sarge1)) #3 Wed Nov 10 11:29:37 EST 2004
On node 0 totalpages: 10000
zone(0): 4096 pages.
zone(1): 5904 pages.
zone(2): 0 pages.
Kernel command line: ip=172.16.4.183:::255.255.252.0:rack099-xen:eth0:off 
root=/dev/sda1 console=tty0 console=ttyS0
Initializing CPU#0
Xen reported: 1396.476 MHz processor.
Console: colour VGA+ 80x25
Linux version 2.4.27-xen0 (becker@pant) (gcc version 3.3.4 (Debian 
1:3.3.4-6sarge1)) #3 Wed Nov 10 11:29:37 EST 2004
On node 0 totalpages: 10000
zone(0): 4096 pages.
zone(1): 5904 pages.
zone(2): 0 pages.
Kernel command line: ip=172.16.4.183:::255.255.252.0:rack099-xen:eth0:off 
root=/dev/sda1 console=tty0 console=ttyS0
Initializing CPU#0
Xen reported: 1396.476 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2791.83 BogoMIPS
Memory: 36056k/40000k available (2245k kernel code, 3944k reserved, 716k data, 
112k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: Intel(R) Pentium(R) III CPU family      1400MHz stepping 01
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Probing PCI hardware (bus 01)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
Event-channel device installed.
Xen virtual console successfully installed as ttyS
Starting Xen Balloon driver
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.2.52-k3
Copyright (c) 1999-2004 Intel Corporation.
PCI: Obtained IRQ 17 for device 01:02.0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
PCI: Obtained IRQ 16 for device 01:04.0
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
pcnet32.c:v1.30c 05.25.2004 tsbogend@xxxxxxxxxxxxxxxx
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller at PCI slot 00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
hda: Disabling (U)DMA for SAMSUNG CD-ROM SN-124
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-cdrom driver.
hda: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver (1.1-3 Nov 10 2004 11:29:04)
PCI: Obtained IRQ 18 for device 01:06.0
PCI: Obtained IRQ 19 for device 01:06.1
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec aic7899 Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec aic7899 Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 100, 16bit)
  Vendor: HITACHI   Model: DK32DJ-18MC       Rev: D4D4
  Type:   Direct-Access                      ANSI SCSI revision: 03
  Vendor: PE/PV     Model: 1x3 SCSI BP       Rev: 0.28
  Type:   Processor                          ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
megaraid: v1.18k (Release Date: Thu Aug 28 10:05:11 EDT 2003)
megaraid: no BIOS enabled.
scsi2 : SCSI host adapter emulation for IDE ATAPI devices
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 35566478 512-byte hdwr sectors (18210 MB)
Partition check:
 sda: sda1 sda2 sda3
Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0,  type 3
Initializing Cryptographic API
Initialising Xen netif backend
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
IP-Config: Complete:
      device=eth0, addr=172.16.4.183, mask=255.255.252.0, gw=255.255.255.255,
     host=rack099-xen, domain=, nis-domain=(none),
     bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx>
All bugs added by David S. Miller <davem@xxxxxxxxxx>
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 112k freed
INIT: version 2.86 booting

+++++++++++++++++++++++++

+++++++++++++++++++++++++
xm messages
+++++++++++++++++++++++++
# xm info
system                 : Linux
host                   : rack099-xen
release                : 2.4.27-xen0
version                : #3 Wed Nov 10 11:29:37 EST 2004
machine                : i686
cores                  : 1
hyperthreads_per_core  : 1
cpu_mhz                : 1396
memory                 : 2047
free_memory            : 1485
rack099-xen:~# xm info
system                 : Linux
host                   : rack099-xen
release                : 2.4.27-xen0
version                : #3 Wed Nov 10 11:29:37 EST 2004
machine                : i686
cores                  : 1
hyperthreads_per_core  : 1
cpu_mhz                : 1396
memory                 : 2047
free_memory            : 1485
# xm list
Name              Id  Mem(MB)  CPU  State  Time(s)  Console
Domain-0           0       34    0  r----    174.5        
grant              1      499    0  -b---     53.5    9601

+++++++++++++++++++++++++

+++++++++++++++++++++++++
iperfrun  stock to stock
+++++++++++++++++++++++++
# iperf -c 172.16.7.3
------------------------------------------------------------
Client connecting to 172.16.7.3, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  5] local 172.16.4.183 port 32812 connected with 172.16.7.3 port 5001
[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-10.0 sec  1.10 GBytes   941 Mbits/sec


+++++++++++++++++++++++++


-------------------------------------------------------
This SF.Net email is sponsored by: InterSystems CACHE
FREE OODBMS DOWNLOAD - A multidimensional database that combines
robust object and relational technologies, making it a perfect match
for Java, C++,COM, XML, ODBC and JDBC. www.intersystems.com/match8
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.