>From: Boris Derzhavets <bderzhavets@xxxxxxxxx
; Ian Murray <murrayie@xxxxxxxxxxx
>Sent: Fri, 14 January, 2011 13:21:10
>Subject: Re: [Xen-users] Can't get Dom0 PV_OPS working properly
>Your updated config is attached. It seems to be working under Xen 4.0.1 on F14
>Just in case , i hard linked Dom0 backend drivers to the kernel.
>Your config presumes that this drivers would be loaded by some other tools
>and be resident in memory before DomU start, what by some reasons didn't
>I also ran "dracut -f initramfs-22.214.171.124.img 126.96.36.199"
>CONFIG_SYSFS_DEPRECATED_V2 has been also disabled.
Thanks for that. I gave it a go with that and that didn't solve my problem. I
did have to load a couple of modules before, which I didn't have to do using
I figured out that xenconsoled wasn't running and when I started this manually,
I was able to subsequently start PV VM's with no problem! So, issue is partially
solved. I just need to figure out why it isn't being started when xend starts
plus figure out the lack of Dom0 boot info. If only I had a null modem cable!
Thanks again for the help so far,
Xen-users mailing listXen-users@xxxxxxxxxxxxxxxxxxxhttp://lists.xensource.com/xen-users