|
xen-users
RE: [Xen-users] Issues using nouveau video driver on machine as Dom0
The previously attached dmesg output of the linux-image-2.6.32-5-xen-amd64 (2.6.32-30) kernel was booted on baremetal.
Below all pertains to the linux-image-2.6.32-5-xen-amd64 (2.6.32-29+xen0) kernel booted via the Xen hypervisor.
[ 8.234475] Console: switching to colour frame buffer device 160x50 <-- this is approximently where the linux-image-2.6.32-5-xen-amd64 (2.6.32-30) kernel fails loading through the hypervisor
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-29+xen0) (Ian.Campbell@xxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Dec 23 12:55:59 UTC 2010
[ 0.000000] Command line: placeholder root=UUID=3c9c2308-4a65-4011-8ca9-2899671a8a7c ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn c0000-f0000: 196608 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn f4000-f4c80: 3200 pages freed
[ 0.000000] released 199808 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] Xen: 000000000009d800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000bfeb0000 (usable)
[ 0.000000] Xen: 00000000bfeb0000 - 00000000bfecc000 (ACPI data)
[ 0.000000] Xen: 00000000bfecc000 - 00000000bff00000 (ACPI NVS)
[ 0.000000] Xen: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] Xen: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] Xen: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] Xen: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0xbfeb0 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfeb0000
[ 0.000000] 0000000000 - 00bfeb0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfeb0000 @ 100000-704000
[ 0.000000] RAMDISK: 016b2000 - 03229400
[ 0.000000] ACPI: RSDP 00000000000f69b0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bfebb27e 0008C (v01 LENOVO TP-7K 00002290 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfebb400 000F4 (v03 LENOVO TP-7K 00002290 LNVO 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 00000000bfebb81d 1044C (v01 LENOVO TP-7K 00002290 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfee4000 00040
[ 0.000000] ACPI: SSDT 00000000bfebb5b4 00269 (v01 LENOVO TP-7K 00002290 MSFT 03000000)
[ 0.000000] ACPI: ECDT 00000000bfecbc69 00052 (v01 LENOVO TP-7K 00002290 LNVO 00000001)
[ 0.000000] ACPI: TCPA 00000000bfecbcbb 00032 (v02 LENOVO TP-7K 00002290 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bfecbced 00068 (v01 LENOVO TP-7K 00002290 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bfecbd55 0003C (v01 LENOVO TP-7K 00002290 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bfecbd91 00038 (v01 LENOVO TP-7K 00002290 LNVO 00000001)
[ 0.000000] ACPI: SLIC 00000000bfecbe62 00176 (v01 LENOVO TP-7K 00002290 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfecbfd8 00028 (v01 LENOVO TP-7K 00002290 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfee26d9 0025F (v01 LENOVO TP-7K 00002290 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bfee2938 000A6 (v01 LENOVO TP-7K 00002290 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bfee29de 004F7 (v01 LENOVO TP-7K 00002290 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bfee2ed5 001D8 (v01 LENOVO TP-7K 00002290 INTL 20050513)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad R61
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bfeb0000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000bfeb0000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 0000000000027fd7] pages 18
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00bfeb0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [00039d2000 - 00039f3000] XEN PAGETABLES ==> [00039d2000 - 00039f3000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001691994] TEXT DATA BSS ==> [0001000000 - 0001691994]
[ 0.000000] #4 [00016b2000 - 0003229400] RAMDISK ==> [00016b2000 - 0003229400]
[ 0.000000] #5 [000322a000 - 00039d2000] XEN START INFO ==> [000322a000 - 00039d2000]
[ 0.000000] #6 [0001692000 - 000169214c] BRK ==> [0001692000 - 000169214c]
[ 0.000000] #7 [0000100000 - 00006e0000] PGTABLE ==> [0000100000 - 00006e0000]
[ 0.000000] found SMP MP-table at [ffff8800000f69e0] f69e0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bfeb0
[ 0.000000] On node 0 totalpages: 785997
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1507 pages reserved
[ 0.000000] DMA zone: 2434 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10692 pages used for memmap
[ 0.000000] DMA32 zone: 771308 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 256
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880003a29000 s90328 r8192 d24360 u122880
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] trying to map vcpu_info 0 at ffff880003a34020, mfn 13ba34, offset 32
[ 0.000000] cpu 0 using vcpu_info at ffff880003a34020
[ 0.000000] trying to map vcpu_info 1 at ffff880003a52020, mfn 13ba52, offset 32
[ 0.000000] cpu 1 using vcpu_info at ffff880003a52020
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773742
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: placeholder root=UUID=3c9c2308-4a65-4011-8ca9-2899671a8a7c ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between ffff88000680b000 - ffff88000a80b000
[ 0.000000] DMA: software IO TLB at phys 0x680b000 - 0xa80b000
[ 0.000000] xen_swiotlb_fixup: buf=ffff88000680b000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff88000a86b000 size=32768
[ 0.000000] Memory: 2985528k/3144384k available (3146k kernel code, 396k absent, 158460k reserved, 1885k data, 600k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:768
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] alloc irq_desc for 767 on node -1
[ 0.000000] alloc kstat_irqs on node -1
[ 0.000000] Detected 1995.057 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.11 BogoMIPS (lpj=7980228)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004186] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005299] Mount-cache hash table entries: 256
[ 0.005577] Initializing cgroup subsys ns
[ 0.005649] Initializing cgroup subsys cpuacct
[ 0.005717] Initializing cgroup subsys devices
[ 0.005784] Initializing cgroup subsys freezer
[ 0.005851] Initializing cgroup subsys net_cls
[ 0.005963] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.006075] CPU: L2 cache: 4096K
[ 0.006142] CPU 0/0x0 -> Node 0
[ 0.006207] CPU: Physical Processor ID: 0
[ 0.006271] CPU: Processor Core ID: 0
[ 0.006340] mce: CPU supports 6 MCE banks
[ 0.006427] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
[ 0.006618] SMP alternatives: switching to UP code
[ 0.008000] ACPI: Core revision 20090903
[ 0.032082] alloc irq_desc for 766 on node -1
[ 0.032086] alloc kstat_irqs on node -1
[ 0.032098] alloc irq_desc for 765 on node -1
[ 0.032101] alloc kstat_irqs on node -1
[ 0.032107] alloc irq_desc for 764 on node -1
[ 0.032110] alloc kstat_irqs on node -1
[ 0.032116] alloc irq_desc for 763 on node -1
[ 0.032118] alloc kstat_irqs on node -1
[ 0.032375] installing Xen timer for CPU 1
[ 0.032447] alloc irq_desc for 762 on node -1
[ 0.032450] alloc kstat_irqs on node -1
[ 0.032487] SMP alternatives: switching to SMP code
[ 0.036001] alloc irq_desc for 761 on node -1
[ 0.036001] alloc kstat_irqs on node -1
[ 0.036009] alloc irq_desc for 760 on node -1
[ 0.036012] alloc kstat_irqs on node -1
[ 0.036019] alloc irq_desc for 759 on node -1
[ 0.036022] alloc kstat_irqs on node -1
[ 0.036028] alloc irq_desc for 758 on node -1
[ 0.036030] alloc kstat_irqs on node -1
[ 0.004000] Initializing CPU#1
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 1/0x0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.036144] Brought up 2 CPUs
[ 0.036600] CPU0 attaching sched-domain:
[ 0.036604] domain 0: span 0-1 level CPU
[ 0.036608] groups: 0 1
[ 0.036617] CPU1 attaching sched-domain:
[ 0.036620] domain 0: span 0-1 level CPU
[ 0.036624] groups: 1 0
[ 0.036701] devtmpfs: initialized
[ 0.040474] Grant table initialized
[ 0.040474] regulator: core version 0.5
[ 0.040474] NET: Registered protocol family 16
[ 0.040474] alloc irq_desc for 757 on node -1
[ 0.040474] alloc kstat_irqs on node -1
[ 0.040474] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.040474] ACPI: bus type pci registered
[ 0.040474] sync cpu 0 get result 1 max_id 1
[ 0.040474] sync cpu 1 get result 1 max_id 1
[ 0.040474] alloc irq_desc for 756 on node -1
[ 0.040474] alloc kstat_irqs on node -1
[ 0.040474] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.040474] PCI: MCFG area at f0000000 reserved in E820
[ 0.058674] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.058741] PCI: Using configuration type 1 for base access
[ 0.059416] bio: create slab <bio-0> at 0
[ 0.063147] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.063273] ACPI: EC: EC description table is found, configuring boot EC
[ 0.077157] ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.091231] ACPI: Interpreter enabled
[ 0.091301] ACPI: (supports S0 S3 S4 S5)
[ 0.091574] ACPI: Using IOAPIC for interrupt routing
[ 0.107055] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = "">[ 0.107200] ACPI: Power Resource [PUBS] (on)
[ 0.110032] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.112100] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.112477] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.112552] pci 0000:00:01.0: PME# disabled
[ 0.112892] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe200000-0xfe21ffff]
[ 0.112915] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe224000-0xfe224fff]
[ 0.112938] pci 0000:00:19.0: reg 18 io port: [0x1800-0x181f]
[ 0.113106] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.113186] pci 0000:00:19.0: PME# disabled
[ 0.113422] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 0.113632] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 0.113834] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe225800-0xfe225bff]
[ 0.114022] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.114103] pci 0000:00:1a.7: PME# disabled
[ 0.114333] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe220000-0xfe223fff]
[ 0.114536] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.114616] pci 0000:00:1b.0: PME# disabled
[ 0.114987] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.115067] pci 0000:00:1c.0: PME# disabled
[ 0.115448] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.115528] pci 0000:00:1c.1: PME# disabled
[ 0.115909] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.115989] pci 0000:00:1c.2: PME# disabled
[ 0.116265] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.116342] pci 0000:00:1c.3: PME# disabled
[ 0.116721] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.116798] pci 0000:00:1c.4: PME# disabled
[ 0.117071] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
[ 0.117281] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
[ 0.117493] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
[ 0.117720] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe225c00-0xfe225fff]
[ 0.117927] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.118005] pci 0000:00:1d.7: PME# disabled
[ 0.118591] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.118678] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.118753] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.118839] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.118926] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.119163] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.119186] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.119208] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.119230] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.119253] pci 0000:00:1f.1: reg 20 io port: [0x18c0-0x18cf]
[ 0.119494] pci 0000:00:1f.2: reg 10 io port: [0x18f8-0x18ff]
[ 0.119516] pci 0000:00:1f.2: reg 14 io port: [0x18ec-0x18ef]
[ 0.119539] pci 0000:00:1f.2: reg 18 io port: [0x18f0-0x18f7]
[ 0.119561] pci 0000:00:1f.2: reg 1c io port: [0x18e8-0x18eb]
[ 0.119584] pci 0000:00:1f.2: reg 20 io port: [0x1c00-0x1c1f]
[ 0.119606] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe225000-0xfe2257ff]
[ 0.119746] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.119822] pci 0000:00:1f.2: PME# disabled
[ 0.119989] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe226000-0xfe2260ff]
[ 0.120001] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
[ 0.120001] pci 0000:01:00.0: reg 10 32bit mmio: [0xd6000000-0xd6ffffff]
[ 0.120001] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.120001] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd4000000-0xd5ffffff]
[ 0.120001] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
[ 0.120001] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.120001] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.120001] pci 0000:00:01.0: bridge 32bit mmio: [0xd4000000-0xd6ffffff]
[ 0.120001] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.120001] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
[ 0.120001] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
[ 0.120001] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff]
[ 0.120227] pci 0000:03:00.0: reg 10 32bit mmio: [0xdf2ff000-0xdf2fffff]
[ 0.120540] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.120621] pci 0000:03:00.0: PME# disabled
[ 0.120817] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.121064] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
[ 0.121077] pci 0000:00:1c.1: bridge 32bit mmio: [0xdc100000-0xdf2fffff]
[ 0.121100] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfd00000-0xdfdfffff]
[ 0.121292] pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
[ 0.121305] pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
[ 0.121327] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfa00000-0xdfafffff]
[ 0.121518] pci 0000:00:1c.3: bridge io port: [0x6000-0x6fff]
[ 0.121531] pci 0000:00:1c.3: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
[ 0.121554] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf700000-0xdf7fffff]
[ 0.121744] pci 0000:00:1c.4: bridge io port: [0x7000-0x7fff]
[ 0.121757] pci 0000:00:1c.4: bridge 32bit mmio: [0xcc000000-0xcdffffff]
[ 0.121780] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf400000-0xdf4fffff]
[ 0.121920] pci 0000:15:00.0: reg 10 32bit mmio: [0xf8100000-0xf8100fff]
[ 0.121998] pci 0000:15:00.0: supports D1 D2
[ 0.122001] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122081] pci 0000:15:00.0: PME# disabled
[ 0.122282] pci 0000:15:00.1: reg 10 32bit mmio: [0xf8101000-0xf81017ff]
[ 0.122487] pci 0000:15:00.1: supports D1 D2
[ 0.122490] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122569] pci 0000:15:00.1: PME# disabled
[ 0.122771] pci 0000:15:00.2: reg 10 32bit mmio: [0xf8101800-0xf81018ff]
[ 0.122975] pci 0000:15:00.2: supports D1 D2
[ 0.122978] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.123057] pci 0000:15:00.2: PME# disabled
[ 0.123261] pci 0000:15:00.3: reg 10 32bit mmio: [0xf8101c00-0xf8101cff]
[ 0.123465] pci 0000:15:00.3: supports D1 D2
[ 0.123468] pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.123548] pci 0000:15:00.3: PME# disabled
[ 0.123750] pci 0000:15:00.4: reg 10 32bit mmio: [0xf8102000-0xf81020ff]
[ 0.123954] pci 0000:15:00.4: supports D1 D2
[ 0.123957] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.124001] pci 0000:15:00.4: PME# disabled
[ 0.124001] pci 0000:15:00.5: reg 10 32bit mmio: [0xf8102400-0xf81024ff]
[ 0.124001] pci 0000:15:00.5: supports D1 D2
[ 0.124001] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.124001] pci 0000:15:00.5: PME# disabled
[ 0.124001] pci 0000:00:1e.0: transparent bridge
[ 0.124001] pci 0000:00:1e.0: bridge io port: [0x8000-0xbfff]
[ 0.124001] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8100000-0xfbffffff]
[ 0.124001] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff]
[ 0.124001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.124001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.124001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.124022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.124132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.124240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.124361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.124481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.139384] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.140208] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.140998] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.141788] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.142579] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.143369] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.144167] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.144962] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.145629] xen_balloon: Initialising balloon driver with page order 0.
[ 0.145791] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.145880] vgaarb: loaded
[ 0.145987] PCI: Using ACPI for IRQ routing
[ 0.145987] Switching to clocksource xen
[ 0.145987] pnp: PnP ACPI init
[ 0.145987] ACPI: bus type pnp registered
[ 0.148373] xen: registering gsi 13 triggering 1 polarity 0
[ 0.148377] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.148447] xen: --> irq=13
[ 0.148513] xen: registering gsi 8 triggering 1 polarity 0
[ 0.148516] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.148586] xen: --> irq=8
[ 0.148647] xen: registering gsi 1 triggering 1 polarity 0
[ 0.148650] xen_allocate_pirq: returning irq 1 for gsi 1
[ 0.148718] xen: --> irq=1
[ 0.148779] xen: registering gsi 12 triggering 1 polarity 0
[ 0.148782] xen_allocate_pirq: returning irq 12 for gsi 12
[ 0.148848] xen: --> irq=12
[ 0.151280] pnp: PnP ACPI: found 11 devices
[ 0.151349] ACPI: ACPI bus type pnp unregistered
[ 0.151428] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.151500] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.151573] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.151645] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 0.151718] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 0.151790] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 0.151863] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.151935] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.152008] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.152079] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.152151] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.152223] system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.152308] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[ 0.152394] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
[ 0.152494] system 00:02: ioport range 0x164e-0x164f has been reserved
[ 0.152563] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.152632] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.152701] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.152770] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.152839] system 00:02: ioport range 0x1600-0x165f could not be reserved
[ 0.152909] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.152979] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.153050] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.153120] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.153190] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.153260] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
[ 0.159551] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.159852] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff]
[ 0.159938] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.160005] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.160005] pci 0000:00:01.0: MEM window: 0xd4000000-0xd6ffffff
[ 0.160005] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.160005] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.160005] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.160005] pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff
[ 0.160005] pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff
[ 0.160005] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.160005] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.160005] pci 0000:00:1c.1: MEM window: 0xdc100000-0xdf2fffff
[ 0.160005] pci 0000:00:1c.1: PREFETCH window: 0x000000dfd00000-0x000000dfdfffff
[ 0.160005] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.160005] pci 0000:00:1c.2: IO window: 0x5000-0x5fff
[ 0.160005] pci 0000:00:1c.2: MEM window: 0xd8000000-0xd9ffffff
[ 0.160005] pci 0000:00:1c.2: PREFETCH window: 0x000000dfa00000-0x000000dfafffff
[ 0.160005] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.160005] pci 0000:00:1c.3: IO window: 0x6000-0x6fff
[ 0.160005] pci 0000:00:1c.3: MEM window: 0xd0000000-0xd1ffffff
[ 0.160005] pci 0000:00:1c.3: PREFETCH window: 0x000000df700000-0x000000df7fffff
[ 0.160005] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
[ 0.160005] pci 0000:00:1c.4: IO window: 0x7000-0x7fff
[ 0.160005] pci 0000:00:1c.4: MEM window: 0xcc000000-0xcdffffff
[ 0.160005] pci 0000:00:1c.4: PREFETCH window: 0x000000df400000-0x000000df4fffff
[ 0.160005] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
[ 0.160005] pci 0000:15:00.0: IO window: 0x008000-0x0080ff
[ 0.160005] pci 0000:15:00.0: IO window: 0x008400-0x0084ff
[ 0.160005] pci 0000:15:00.0: PREFETCH window: 0xf4000000-0xf7ffffff
[ 0.160005] pci 0000:15:00.0: MEM window: 0xc0000000-0xc3ffffff
[ 0.160005] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
[ 0.160005] pci 0000:00:1e.0: IO window: 0x8000-0xbfff
[ 0.160005] pci 0000:00:1e.0: MEM window: 0xf8100000-0xfbffffff
[ 0.160005] pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff
[ 0.160005] xen: registering gsi 16 triggering 0 polarity 1
[ 0.160005] alloc irq_desc for 16 on node -1
[ 0.160005] alloc kstat_irqs on node -1
[ 0.162630] xen: --> irq=16
[ 0.162638] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.162712] pci 0000:00:01.0: setting latency timer to 64
[ 0.162739] xen: registering gsi 20 triggering 0 polarity 1
[ 0.162743] alloc irq_desc for 20 on node -1
[ 0.162746] alloc kstat_irqs on node -1
[ 0.162750] xen: --> irq=20
[ 0.162756] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.162834] pci 0000:00:1c.0: setting latency timer to 64
[ 0.162863] xen: registering gsi 21 triggering 0 polarity 1
[ 0.162868] alloc irq_desc for 21 on node -1
[ 0.162871] alloc kstat_irqs on node -1
[ 0.162875] xen: --> irq=21
[ 0.162880] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.162962] pci 0000:00:1c.1: setting latency timer to 64
[ 0.162990] xen: registering gsi 22 triggering 0 polarity 1
[ 0.162995] alloc irq_desc for 22 on node -1
[ 0.162998] alloc kstat_irqs on node -1
[ 0.163002] xen: --> irq=22
[ 0.163007] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.163085] pci 0000:00:1c.2: setting latency timer to 64
[ 0.163114] xen: registering gsi 23 triggering 0 polarity 1
[ 0.163118] alloc irq_desc for 23 on node -1
[ 0.163121] alloc kstat_irqs on node -1
[ 0.163125] xen: --> irq=23
[ 0.163130] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.163208] pci 0000:00:1c.3: setting latency timer to 64
[ 0.163237] xen: registering gsi 20 triggering 0 polarity 1
[ 0.163240] xen_allocate_pirq: returning irq 20 for gsi 20
[ 0.163306] xen: --> irq=20
[ 0.163309] Already setup the GSI :20
[ 0.163374] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.163452] pci 0000:00:1c.4: setting latency timer to 64
[ 0.163466] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.163548] pci 0000:00:1e.0: setting latency timer to 64
[ 0.163579] xen: registering gsi 16 triggering 0 polarity 1
[ 0.163582] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.163649] xen: --> irq=16
[ 0.163652] Already setup the GSI :16
[ 0.163720] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.163803] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.163806] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.163810] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.163813] pci_bus 0000:01: resource 1 mem: [0xd4000000-0xd6ffffff]
[ 0.163816] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.163820] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.163823] pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff]
[ 0.163827] pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff]
[ 0.163830] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
[ 0.163833] pci_bus 0000:03: resource 1 mem: [0xdc100000-0xdf2fffff]
[ 0.163837] pci_bus 0000:03: resource 2 pref mem [0xdfd00000-0xdfdfffff]
[ 0.163840] pci_bus 0000:04: resource 0 io: [0x5000-0x5fff]
[ 0.163843] pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff]
[ 0.163847] pci_bus 0000:04: resource 2 pref mem [0xdfa00000-0xdfafffff]
[ 0.163850] pci_bus 0000:05: resource 0 io: [0x6000-0x6fff]
[ 0.163853] pci_bus 0000:05: resource 1 mem: [0xd0000000-0xd1ffffff]
[ 0.163857] pci_bus 0000:05: resource 2 pref mem [0xdf700000-0xdf7fffff]
[ 0.163860] pci_bus 0000:0d: resource 0 io: [0x7000-0x7fff]
[ 0.163863] pci_bus 0000:0d: resource 1 mem: [0xcc000000-0xcdffffff]
[ 0.163867] pci_bus 0000:0d: resource 2 pref mem [0xdf400000-0xdf4fffff]
[ 0.163870] pci_bus 0000:15: resource 0 io: [0x8000-0xbfff]
[ 0.163873] pci_bus 0000:15: resource 1 mem: [0xf8100000-0xfbffffff]
[ 0.163877] pci_bus 0000:15: resource 2 pref mem [0xf4000000-0xf7ffffff]
[ 0.163880] pci_bus 0000:15: resource 3 io: [0x00-0xffff]
[ 0.163883] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.163887] pci_bus 0000:16: resource 0 io: [0x8000-0x80ff]
[ 0.163890] pci_bus 0000:16: resource 1 io: [0x8400-0x84ff]
[ 0.163893] pci_bus 0000:16: resource 2 pref mem [0xf4000000-0xf7ffffff]
[ 0.163896] pci_bus 0000:16: resource 3 mem: [0xc0000000-0xc3ffffff]
[ 0.163931] NET: Registered protocol family 2
[ 0.164372] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.167298] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.171696] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.172343] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.172416] TCP reno registered
[ 0.172622] NET: Registered protocol family 1
[ 0.173085] pci 0000:01:00.0: Boot video device
[ 0.173173] Unpacking initramfs...
[ 0.214846] Freeing initrd memory: 28125k freed
[ 0.231780] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.231863] DMA: Placing 64MB software IO TLB between ffff88000680b000 - ffff88000a80b000
[ 0.231945] DMA: software IO TLB at phys 0x680b000 - 0xa80b000
[ 0.232339] Simple Boot Flag at 0x35 set to 0x1
[ 0.232853] audit: initializing netlink socket (disabled)
[ 0.232936] type=2000 audit(1295012759.130:1): initialized
[ 0.240747] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.247872] VFS: Disk quotas dquot_6.5.2
[ 0.248013] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.248181] msgmni has been set to 5886
[ 0.248552] alg: No test for stdrng (krng)
[ 0.248686] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.248772] io scheduler noop registered
[ 0.248840] io scheduler anticipatory registered
[ 0.248909] io scheduler deadline registered
[ 0.249014] io scheduler cfq registered (default)
[ 0.249354] alloc irq_desc for 755 on node -1
[ 0.249357] alloc kstat_irqs on node -1
[ 0.249398] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.249753] alloc irq_desc for 754 on node -1
[ 0.249756] alloc kstat_irqs on node -1
[ 0.249847] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.250278] alloc irq_desc for 753 on node -1
[ 0.250281] alloc kstat_irqs on node -1
[ 0.250345] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.250776] alloc irq_desc for 752 on node -1
[ 0.250779] alloc kstat_irqs on node -1
[ 0.250842] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.251278] alloc irq_desc for 751 on node -1
[ 0.251281] alloc kstat_irqs on node -1
[ 0.251344] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.251779] alloc irq_desc for 750 on node -1
[ 0.251782] alloc kstat_irqs on node -1
[ 0.251871] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.257335] registering netback
[ 0.257486] alloc irq_desc for 749 on node -1
[ 0.257489] alloc kstat_irqs on node -1
[ 0.259155] alloc irq_desc for 748 on node -1
[ 0.259159] alloc kstat_irqs on node -1
[ 0.259525] hpet_acpi_add: no address or irqs in _CRS
[ 0.259628] Linux agpgart interface v0.103
[ 0.259782] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.260353] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.260501] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.264033] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.269008] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.271070] mice: PS/2 mouse device common for all mice
[ 0.271213] rtc_cmos 00:07: RTC can wake from S4
[ 0.271325] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.271459] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.271539] cpuidle: using governor ladder
[ 0.271604] cpuidle: using governor menu
[ 0.271673] No iBFT detected.
[ 0.272086] TCP cubic registered
[ 0.272316] NET: Registered protocol family 10
[ 0.272936] lo: Disabled Privacy Extensions
[ 0.273306] Mobile IPv6
[ 0.273372] NET: Registered protocol family 17
[ 0.273544] PM: Resume from disk failed.
[ 0.273558] registered taskstats version 1
[ 0.275283] rtc_cmos 00:07: setting system clock to 2011-01-14 13:45:58 UTC (1295012758)
[ 0.275416] Initalizing network drop monitor service
[ 0.275563] Freeing unused kernel memory: 600k freed
[ 0.275918] Write protecting the kernel read-only data: 4308k
[ 0.277388] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.312931] udev[61]: starting version 164
[ 0.411174] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.411265] ACPI: Thermal Zone [THM0] (54 C)
[ 0.422443] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.422531] ACPI: Thermal Zone [THM1] (56 C)
[ 0.522954] usbcore: registered new interface driver usbfs
[ 0.523059] usbcore: registered new interface driver hub
[ 0.523603] usbcore: registered new device driver usb
[ 0.538608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.539330] SCSI subsystem initialized
[ 0.542012] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.542083] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.542506] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 0.542823] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 0.542911] xen: registering gsi 22 triggering 0 polarity 1
[ 0.542915] xen_allocate_pirq: returning irq 22 for gsi 22
[ 0.542985] xen: --> irq=22
[ 0.542991] Already setup the GSI :22
[ 0.543060] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.543161] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.543170] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.543269] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.547329] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.548077] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe225800
[ 0.557835] libata version 3.00 loaded.
[ 0.561167] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.561438] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.561509] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.561594] usb usb1: Product: EHCI Host Controller
[ 0.561666] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
[ 0.561739] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.562116] usb usb1: configuration #1 chosen from 1 choice
[ 0.562269] hub 1-0:1.0: USB hub found
[ 0.562354] hub 1-0:1.0: 4 ports detected
[ 0.562567] xen: registering gsi 20 triggering 0 polarity 1
[ 0.562571] xen_allocate_pirq: returning irq 20 for gsi 20
[ 0.562638] xen: --> irq=20
[ 0.562643] Already setup the GSI :20
[ 0.562711] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.562798] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.563098] alloc irq_desc for 747 on node -1
[ 0.563101] alloc kstat_irqs on node -1
[ 0.566664] xen: registering gsi 17 triggering 0 polarity 1
[ 0.566672] alloc irq_desc for 17 on node -1
[ 0.566676] alloc kstat_irqs on node -1
[ 0.566681] xen: --> irq=17
[ 0.566689] firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.566916] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 0.566985] ricoh-mmc: Copyright(c) Philip Langdale
[ 0.578376] sdhci: Secure Digital Host Controller Interface driver
[ 0.578448] sdhci: Copyright(c) Pierre Ossman
[ 0.644021] firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10
[ 0.644165] ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
[ 0.644304] ricoh-mmc: Controller is now disabled.
[ 0.644788] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
[ 0.644907] xen: registering gsi 18 triggering 0 polarity 1
[ 0.644914] alloc irq_desc for 18 on node -1
[ 0.644917] alloc kstat_irqs on node -1
[ 0.644923] xen: --> irq=18
[ 0.644931] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.646052] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.646148] sdhci-pci 0000:15:00.2: setting latency timer to 64
[ 0.647248] Registered led device: mmc0::
[ 0.648387] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
[ 0.826652] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:58:c9:91:92
[ 0.826739] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 0.826847] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff
[ 0.827231] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 0.827553] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 0.827636] xen: registering gsi 19 triggering 0 polarity 1
[ 0.827643] alloc irq_desc for 19 on node -1
[ 0.827646] alloc kstat_irqs on node -1
[ 0.827651] xen: --> irq=19
[ 0.827659] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.827755] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.827764] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.827845] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.828015] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.831991] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.832019] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe225c00
[ 0.845021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.845115] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.845184] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.845266] usb usb2: Product: EHCI Host Controller
[ 0.845332] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
[ 0.845400] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.845602] usb usb2: configuration #1 chosen from 1 choice
[ 0.845756] hub 2-0:1.0: USB hub found
[ 0.845839] hub 2-0:1.0: 6 ports detected
[ 0.845997] ahci 0000:00:1f.2: version 3.0
[ 0.846026] xen: registering gsi 16 triggering 0 polarity 1
[ 0.846030] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.846097] xen: --> irq=16
[ 0.846101] Already setup the GSI :16
[ 0.846169] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.846326] alloc irq_desc for 746 on node -1
[ 0.846329] alloc kstat_irqs on node -1
[ 0.846447] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
[ 0.846531] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.846624] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.846956] scsi0 : ahci
[ 0.847234] scsi1 : ahci
[ 0.847469] scsi2 : ahci
[ 0.847759] ata1: SATA max UDMA/133 abar m2048@0xfe225000 port 0xfe225100 irq 746
[ 0.847841] ata2: DUMMY
[ 0.847908] ata3: SATA max UDMA/133 abar m2048@0xfe225000 port 0xfe225200 irq 746
[ 0.848045] ata_piix 0000:00:1f.1: version 2.13
[ 0.848059] xen: registering gsi 16 triggering 0 polarity 1
[ 0.848062] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.848129] xen: --> irq=16
[ 0.848133] Already setup the GSI :16
[ 0.848201] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 0.848335] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.848487] scsi3 : ata_piix
[ 0.848700] scsi4 : ata_piix
[ 0.849807] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14
[ 0.849880] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15
[ 0.850377] ata5: port disabled. ignoring.
[ 0.860097] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.860199] xen: registering gsi 20 triggering 0 polarity 1
[ 0.860202] xen_allocate_pirq: returning irq 20 for gsi 20
[ 0.860269] xen: --> irq=20
[ 0.860273] Already setup the GSI :20
[ 0.860339] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.860421] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.860429] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.860511] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.860661] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
[ 0.860813] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.860882] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.860966] usb usb3: Product: UHCI Host Controller
[ 0.861035] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 0.861103] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.861299] usb usb3: configuration #1 chosen from 1 choice
[ 0.861450] hub 3-0:1.0: USB hub found
[ 0.861532] hub 3-0:1.0: 2 ports detected
[ 0.862021] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[ 0.862349] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[ 0.862426] xen: registering gsi 21 triggering 0 polarity 1
[ 0.862429] xen_allocate_pirq: returning irq 21 for gsi 21
[ 0.862497] xen: --> irq=21
[ 0.862501] Already setup the GSI :21
[ 0.862570] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.862662] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.862670] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.862756] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.862929] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.863078] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.863147] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.863228] usb usb4: Product: UHCI Host Controller
[ 0.863295] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 0.863363] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.863505] usb usb4: configuration #1 chosen from 1 choice
[ 0.863660] hub 4-0:1.0: USB hub found
[ 0.863750] hub 4-0:1.0: 2 ports detected
[ 0.864157] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.864469] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.864546] xen: registering gsi 16 triggering 0 polarity 1
[ 0.864549] xen_allocate_pirq: returning irq 16 for gsi 16
[ 0.864618] xen: --> irq=16
[ 0.864622] Already setup the GSI :16
[ 0.864691] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.864777] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.864785] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.864863] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.870386] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001860
[ 0.870541] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.870611] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.870693] usb usb5: Product: UHCI Host Controller
[ 0.870759] usb usb5: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 0.870827] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.871023] usb usb5: configuration #1 chosen from 1 choice
[ 0.871171] hub 5-0:1.0: USB hub found
[ 0.871252] hub 5-0:1.0: 2 ports detected
[ 0.871407] xen: registering gsi 17 triggering 0 polarity 1
[ 0.871411] xen_allocate_pirq: returning irq 17 for gsi 17
[ 0.871478] xen: --> irq=17
[ 0.871482] Already setup the GSI :17
[ 0.871550] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.871633] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.871642] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.871717] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.871867] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
[ 0.872015] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.872085] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.872165] usb usb6: Product: UHCI Host Controller
[ 0.872231] usb usb6: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 0.872299] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.872482] usb usb6: configuration #1 chosen from 1 choice
[ 0.872632] hub 6-0:1.0: USB hub found
[ 0.872714] hub 6-0:1.0: 2 ports detected
[ 0.873120] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 0.873436] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 0.873513] xen: registering gsi 18 triggering 0 polarity 1
[ 0.873517] xen_allocate_pirq: returning irq 18 for gsi 18
[ 0.873586] xen: --> irq=18
[ 0.873590] Already setup the GSI :18
[ 0.873656] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.873740] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.873748] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.873825] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.873975] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.874131] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.874201] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.874282] usb usb7: Product: UHCI Host Controller
[ 0.874347] usb usb7: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 0.874415] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.874605] usb usb7: configuration #1 chosen from 1 choice
[ 0.874758] hub 7-0:1.0: USB hub found
[ 0.874842] hub 7-0:1.0: 2 ports detected
[ 0.919103] mmc0: new high speed SDHC card at address a227
[ 0.924133] mmcblk0: mmc0:a227 SW08G 7.50 GiB
[ 0.924251] mmcblk0: p1
[ 1.013733] ata4.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, PX07, max UDMA/33
[ 1.028388] ata4.00: configured for UDMA/33
[ 1.144133] firewire_core: created device fw0: GUID 00016c2000175c12, S400
[ 1.168041] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.168139] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.168732] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.168737] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.168823] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.215162] ata1.00: ATA-8: TOSHIBA MK2565GSX, GJ003M, max UDMA/100
[ 1.215234] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.216253] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.216258] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.216344] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.217123] ata1.00: configured for UDMA/100
[ 1.233560] ata1.00: configured for UDMA/100
[ 1.233630] ata1: EH complete
[ 1.233813] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2565GS GJ00 PQ: 0 ANSI: 5
[ 1.238041] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N PX07 PQ: 0 ANSI: 5
[ 1.256059] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.256251] sd 0:0:0:0: [sda] Write Protect is off
[ 1.256320] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.256366] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.256695] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.270594] Uniform CD-ROM driver Revision: 3.20
[ 1.271020] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.300549] sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.337238] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.344916] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.345032] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.952331] device-mapper: uevent: version 1.0.3
[ 1.952563] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 2.140394] PM: Starting manual resume from disk
[ 2.140477] PM: Resume from partition 8:6
[ 2.140479] PM: Checking hibernation image.
[ 2.162759] PM: Error -22 checking image file
[ 2.162762] PM: Resume from disk failed.
[ 2.269953] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 4.008431] udev[379]: starting version 164
[ 4.587570] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 4.588390] ACPI: Lid Switch [LID]
[ 4.588531] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 4.588630] ACPI: Sleep Button [SLPB]
[ 4.588786] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.588879] ACPI: Power Button [PWRF]
[ 4.652516] ACPI: SSDT 00000000bfee1b32 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 4.654021] ACPI: SSDT 00000000bfee1e7b 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 4.658712] Marking TSC unstable due to TSC halts in idle
[ 4.658851] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 4.659690] ACPI: SSDT 00000000bfee1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 4.660944] ACPI: SSDT 00000000bfee1df6 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 4.665366] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 4.719144] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.730669] Non-volatile memory driver v1.3
[ 4.752305] ACPI: AC Adapter [AC] (on-line)
[ 4.756527] ACPI: WMI: Mapper loaded
[ 4.781681] ACPI: Battery Slot [BAT0] (battery present)
[ 4.996960] acpi device:06: registered as cooling_device0
[ 4.998909] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input6
[ 5.005361] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 5.319679] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[ 5.444989] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 5.445111] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 5.445229] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
[ 5.445362] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
[ 5.445497] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
[ 5.520206] thinkpad_acpi: ThinkPad ACPI Extras v0.23
[ 5.520322] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.520430] thinkpad_acpi: ThinkPad BIOS 7KETC9WW (2.29 ), EC 7KHT24WW-1.08
[ 5.520541] thinkpad_acpi: Lenovo ThinkPad R61, model 8919W1B
[ 5.537629] thinkpad_acpi: ACPI backlight control delay disabled
[ 5.538418] thinkpad_acpi: radio switch found; radios are enabled
[ 5.538909] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.539048] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.542611] cfg80211: Using static regulatory domain info
[ 5.542681] cfg80211: Regulatory domain: US
[ 5.542747] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.542830] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 5.542899] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.542968] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.543038] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.543107] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.543176] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 5.543887] cfg80211: Calling CRDA for country: US
[ 5.552845] Registered led device: tpacpi::thinklight
[ 5.552958] Registered led device: tpacpi::power
[ 5.553046] Registered led device: tpacpi::standby
[ 5.553135] Registered led device: tpacpi::thinkvantage
[ 5.557277] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 5.557744] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 5.650322] xen: registering gsi 23 triggering 0 polarity 1
[ 5.650326] xen_allocate_pirq: returning irq 23 for gsi 23
[ 5.650394] xen: --> irq=23
[ 5.650399] Already setup the GSI :23
[ 5.650461] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.746437] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input8
[ 5.777789] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input9
[ 6.063334] [drm] Initialized drm 1.1.0 20060810
[ 6.070949] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 6.072004] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 6.076555] xen: registering gsi 17 triggering 0 polarity 1
[ 6.076559] xen_allocate_pirq: returning irq 17 for gsi 17
[ 6.076629] xen: --> irq=17
[ 6.076634] Already setup the GSI :17
[ 6.076699] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.076826] iwl3945 0000:03:00.0: setting latency timer to 64
[ 6.080013] xen: registering gsi 17 triggering 0 polarity 1
[ 6.080017] xen_allocate_pirq: returning irq 17 for gsi 17
[ 6.080110] xen: --> irq=17
[ 6.080114] Already setup the GSI :17
[ 6.080200] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.080310] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[ 6.080439] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.144802] iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 6.144888] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 6.145099] alloc irq_desc for 745 on node -1
[ 6.145102] alloc kstat_irqs on node -1
[ 6.369741] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 6.416927] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 6.417045] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 6.417131] xen: registering gsi 16 triggering 0 polarity 1
[ 6.417135] xen_allocate_pirq: returning irq 16 for gsi 16
[ 6.417203] xen: --> irq=16
[ 6.417219] Already setup the GSI :16
[ 6.417288] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.417368] nouveau 0000:01:00.0: setting latency timer to 64
[ 6.420378] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
[ 6.422847] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086900a2)
[ 6.431075] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 6.509683] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 6.509753] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 6.509817] [drm] nouveau 0000:01:00.0: Bios version 60.86.3e.00
[ 6.509884] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 6.509963] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[ 6.510028] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 6.510108] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[ 6.510175] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
[ 6.510255] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 6.510334] [drm] nouveau 0000:01:00.0: 2: 0x00001231: type 0x31 idx 2 tag 0x07
[ 6.510414] [drm] nouveau 0000:01:00.0: 3: 0x00000311: type 0x11 idx 3 tag 0xff
[ 6.510493] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
[ 6.510560] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02811300 00000028
[ 6.510626] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02822312 00010030
[ 6.510694] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 014333f1 0080c080
[ 6.510760] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
[ 6.510835] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDD0F
[ 6.555633] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE04F
[ 6.557084] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 6.592123] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEAA4
[ 6.592224] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB96
[ 6.600172] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED83
[ 6.600262] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEDE8
[ 6.624139] [drm] nouveau 0000:01:00.0: 0xEDE8: Condition still not met after 20ms, skipping following opcodes
[ 6.624296] [drm] nouveau 0000:01:00.0: 0xCE7E: parsing output script 0
[ 6.624410] [drm] nouveau 0000:01:00.0: 0xCFF4: parsing output script 0
[ 6.624528] [drm] nouveau 0000:01:00.0: 0xC66A: parsing output script 0
[ 6.749231] [TTM] Zone kernel: Available graphics memory: 1570060 kiB.
[ 6.749324] [drm] nouveau 0000:01:00.0: 128 MiB VRAM
[ 6.783292] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 6.783374] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 6.783826] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 6.791136] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 6.792368] [drm] nouveau 0000:01:00.0: Detected a LVDS output
[ 6.792439] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 6.792504] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 6.792610] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 6.792684] [drm] nouveau 0000:01:00.0: Detected a LVDS connector
[ 6.891684] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 6.891934] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 8.227492] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x40250000, bo ffff880002565200
[ 8.234475] Console: switching to colour frame buffer device 160x50 <------------ Where the kernel still working/booting
[ 8.234492] [drm] nouveau 0000:01:00.0: 0xCE82: parsing output script 1
[ 8.234514] [drm] nouveau 0000:01:00.0: 0xCCE3: parsing clock script 0
[ 8.236884] fb0: nouveaufb frame buffer device
[ 8.236903] registered panic notifier
[ 8.236923] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 8.256422] [drm] nouveau 0000:01:00.0: 0xCE41: parsing clock script 1
[ 9.309417] Adding 3905528k swap on /dev/sda6. Priority:-1 extents:1 across:3905528k
[ 9.871341] loop: module loaded
[ 9.946423] thinkpad_ec: thinkpad_ec 0.40 loaded.
[ 9.954456] tp_smapi 0.40 loading...
[ 9.955726] tp_smapi successfully loaded (smapi_port=0xb2).
[ 10.070906] hdaps: LENOVO ThinkPad R61 detected, setting orientation 1
[ 10.073174] hdaps: initial mode latch is 0x05
[ 10.073388] hdaps: setting ec_rate=250, filter_order=2
[ 10.073625] hdaps: device successfully initialized.
[ 10.074155] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input11
[ 10.076401] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input12
[ 10.076827] hdaps: driver successfully loaded.
[ 13.670764] platform microcode: firmware: requesting intel-ucode/06-0f-0a
[ 13.768157] smapi smapi: set_real_thresh: set start to 49 for bat=0
[ 13.783185] Event-channel device installed.
[ 13.813635] platform microcode: firmware: requesting intel-ucode/06-0f-0a
[ 13.826889] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 13.992164] smapi smapi: set_real_thresh: set stop to 80 for bat=0
[ 14.124860] alloc irq_desc for 744 on node -1
[ 14.124864] alloc kstat_irqs on node -1
[ 14.124937] alloc irq_desc for 743 on node -1
[ 14.124942] alloc kstat_irqs on node -1
[ 14.125279] XENBUS: Unable to read cpu state
[ 14.125713] XENBUS: Unable to read cpu state
[ 20.467473] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 20.481349] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 22.516816] lp: driver loaded but no devices found
[ 22.668093] ppdev: user-space parallel port driver
[ 24.125298] Bridge firewalling registered
[ 29.117134] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 29.205636] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 29.280962] Registered led device: iwl-phy0::radio
[ 29.281683] Registered led device: iwl-phy0::assoc
[ 29.282372] Registered led device: iwl-phy0::RX
[ 29.282993] Registered led device: iwl-phy0::TX
[ 29.298136] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.347898] CPU0 attaching NULL sched-domain.
[ 33.347907] CPU1 attaching NULL sched-domain.
[ 33.376194] CPU0 attaching sched-domain:
[ 33.376205] domain 0: span 0-1 level CPU
[ 33.376215] groups: 0 1
[ 33.376238] CPU1 attaching sched-domain:
[ 33.376245] domain 0: span 0-1 level CPU
[ 33.376254] groups: 1 0
[ 35.110003] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.497928] Registered led device: iwl-phy0::radio
[ 39.498818] Registered led device: iwl-phy0::assoc
[ 39.499587] Registered led device: iwl-phy0::RX
[ 39.500407] Registered led device: iwl-phy0::TX
[ 39.515441] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.334067] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.720521] Registered led device: iwl-phy0::radio
[ 40.720674] Registered led device: iwl-phy0::assoc
[ 40.720734] Registered led device: iwl-phy0::RX
[ 40.720793] Registered led device: iwl-phy0::TX
[ 40.742226] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 45.337290] wlan0: direct probe to AP 00:14:bf:89:44:68 (try 1)
[ 45.339838] wlan0: direct probe responded
[ 45.339847] wlan0: authenticate with AP 00:14:bf:89:44:68 (try 1)
[ 45.341910] wlan0: authenticated
[ 45.341963] wlan0: associate with AP 00:14:bf:89:44:68 (try 1)
[ 45.345137] wlan0: RX AssocResp from 00:14:bf:89:44:68 (capab=0x411 status=0 aid=1)
[ 45.345147] wlan0: associated
[ 45.350849] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 45.561573] padlock: VIA PadLock not detected.
[ 50.724196] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 55.872130] wlan0: no IPv6 routers present
-M
Subject: RE: [Xen-users] Issues using nouveau video driver on machine as Dom0
Date: Fri, 14 Jan 2011 13:44:17 -0500
Hello xenners,
It has recently
been brought to my attention that linux-image-2.6.32-5-xen-amd64
(2.6.32-30) was released in the Debian sid repositories [1]. Urgency
is set to high so I'd imagine the migration to squeeze will not take
long as well. The changelog shows [2]:
xen: backport TTM patches to use PCI API. Fixes PCIe GPU (specifically
Radeon and Nouveau) on Xen (Closes: #601341).
Previously I was successful using the nouveau video driver with
Xen on my laptop with nvidia graphic when using the
Debian 2.6.32-29+xen0 kernel from the ianc (Ian Campbells) xenbits
folder.
When I tried the new sid kernel (-30), I
found that I was able to boot natively (bare-metal) with full
functionality; meaning X with gnome desktop manager was working, able
to suspended and woken up, etc. (did not test sound).
When I
tried to boot the kernel through the Xen hypervisor it hangs X &
fb console like reported in a bug report [3]. My laptop is a Lenovo
ThinkPad R61 and my lspci -vvv -s 01:00.0 output is as
followed:
01:00.0 VGA compatible controller: nVidia
Corporation G84M [Quadro NVS 140M] (rev a1) (prog-if 00 [VGA
controller])
Subsystem: Lenovo ThinkPad T61
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+
66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency:
0, Cache Line Size: 64 bytes
Interrupt: pin A
routed to IRQ 16
Region 0: Memory at d6000000
(32-bit, non-prefetchable) [size=16M]
Region 1:
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d4000000 (64-bit, non-prefetchable)
[size=32M]
Region 5: I/O ports at 2000
[size=128]
Expansion ROM at <unassigned>
[disabled]
Capabilities: [60] Power Management
version 2
Flags: PMEClk-
DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0
PME-
Capabilities: [68] MSI: Enable- Count=1/1
Maskable- 64bit+
Address:
0000000000000000 Data: 0000
Capabilities:
[78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency
L0s <512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc-
AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s
L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s Enabled; RCB
128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width
x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64-
WRR128-
Ctrl:
ArbSelect=Fixed
Status:
InProgress-
VC0:
Caps: PATOffset=00 MaxTimeSlots=1
RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status:
NegoPending- InProgress-
Capabilities: [128 v1]
Power Budgeting <?>
Capabilities: [600
v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nouveau
Attached is my dmesg output.
Please advise on how one
should proceed. I'd like to know why 2.6.32-29+xen0 works but
2.6.52-30 does not work on my system.
[1]: http://packages.debian.org/sid/linux-image-2.6.32-5-xen-amd64 or
the source package at http://packages.qa.debian.org/l/linux-2.6.html
[2] :
http://packages.debian.org/changelogs/pool/main/l/linux-2.6/linux-2.6_2.6.32-30/changelog
[3]
:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=601341
-M
|
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
Home