Re: [Xen-users] HVM Networking Issues

[Jake Stride <jake@xxxxxxxxxxxx>]

Hi Zoran,

I believe debian renames the network interfaces so brctl show gives:

bridge name     bridge id               STP enabled     interfaces
eth0            8000.001b242dbee1       no              peth0
                                                        tap0
                                                        vif32.0
                                                        vif5.0
                                                        vif52.0
                                                        vif53.0
                                                        vif59.0
                                                        vif6.0
                                                        vif60.0
                                                        vif8.0

Thanks
Jake

2011/1/3 Fajar A. Nugraha <list@xxxxxxxxx>:
> 2011/1/3 Zoran Popović <shoom013@xxxxxxxxx>:
>> bridge=eth0 is wrong - it should be something like virbr0 or whatever your
>> bridge is (I use Fedora, but the idea with Xen networking is more or less
>> same) - eth0 is physical device, can't do it like that.
>
> Actually, it might be correct, as some versions of xen use "eth0" as
> bridge name.
> You got a point though, better run "brctl show" to determine the
> correct bridge name. Another thing the OP might do is make sure the
> MAC is unique, not used on some other machine on the same network.
>
> --
> Fajar
>
>>
>> ZP.
>>
>> 2011/1/2 Jake Stride <jake@xxxxxxxxxxxx>
>>>
>>> ...vif = [
>>> 'type=ioemu,bridge=eth0,ip=78.xxx.xxx.xxx,mac=22:61:34:00:00:01' ]
>



-- 
Jake Stride

Find out more http://about.me/jakestride or follow me on twitter @jake.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users