RE: [Xen-users] HVM Networking Issues

[Matej Zary <matej.zary@xxxxxxxxx>]

Jake, in this case I would believe in what the Windows are trying to say and 
would look if there's the same IP address you inserted in the Win XP Control 
Centre used somewhere in that physical subnet (seems like the Windows DomU is 
bridged to the same network as the Dom0).  Have you tried different IP address?

Matej 
________________________________________
From: Jake Stride [jake@xxxxxxxxxxxx]
Sent: 02 January 2011 22:53
To: Matej Zary
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] HVM Networking Issues

Hi Matej,

I still get the conflict even when that is removed.

Thanks
Jake

On 2 January 2011 21:33, Matej Zary <matej.zary@xxxxxxxxx> wrote:
> Hi,
>
> I would start with removing the "ip=78.xxx.xxx.xxx" parameter from DomU 
> config. :)
>
>
> Regards
>
> Matej
> ________________________________________
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
> [xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Jake Stride 
> [jake@xxxxxxxxxxxx]
> Sent: 02 January 2011 14:33
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-users] HVM Networking Issues
>
> I've looked long and hard for an answer to this and am stuck.
>
> I have setup a Windows XP DomU on Xen 3.2-1 running on Debian and I
> can connect fine to the instance via VNC but I get no networking
> within the windows instance as it says the IP address conflicts with
> another on the network.
>
> All my linux instances network fine, and I'm confused as to the issue.
> Can anybody provide any pointers? My cfg is:
>
> kernel = "/usr/lib/xen-default/boot/hvmloader"
> builder = 'hvm'
> vif = [ 'type=ioemu,bridge=eth0,ip=78.xxx.xxx.xxx,mac=22:61:34:00:00:01' ]
> memory = 512
> shadow_memory = 8
> disk = [ 'phy:/dev/xen-vol/xp,hdc,w' ]
> device_model = '/usr/lib/xen-default/bin/qemu-dm'
> boot = "dc"
> vnc = 1 # use VNC to insall and setup windows after that is done you
> can disable this
> vncpasswd = '***'
> vnclisten = '78.xxx.xxx.xxx'
> vcpus = 2 # number of cpu's to assign
> stdvga = 0
> serial = 'pty'
> usbdevice = 'tablet' # Required for USB mouse
> on_reboot = 'restart'
> on_crash = 'restart'
>
> Thanks
> Jake
>
> --
> Jake Stride
>
> Find out more http://about.me/jakestride or follow me on twitter @jake.
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>



--
Jake Stride

Find out more http://about.me/jakestride or follow me on twitter @jake.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users