This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
Home Products Support Community News


RE: [Xen-users] RAID10 Array

> 2) How would I use 802.3ad "link agregation" with ATAoE?
You would not. Just use (for example) 4 NICs for AoE and the kernel driver
will automatically balance your traffic over all available interfaces.
The kernel knows which interfaces can reach which from the target and does
all the balancing.
This even allows high availability when using two switches: just connect
half of the interfaces to one switch and the others to the other switch (do
the same with your storage system) and you're done. You may just plug the
power of one switch and everything will (with a very short delay) continue
to work -- with half the bandwidth, of course.

-- Adi
and they "export" a partition via
vbladed 0 1 eth0 /dev/sdd5
If i wanted to use link agregation, what interface would I put in? Also, would I need to set up my switch with 802.3ad/LACP "trunks".
Xen-users mailing list
<Prev in Thread] Current Thread [Next in Thread>