On Fri, Jan 15, 2010 at 12:10 AM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
> Run "depmod -a 2.6.18-164.10.1.el5.centos.plusxen".
i had run 'depmod -a', as i always do when building opensuse kernels,
with no effect.
i did not realize that "depmod -a 2.6.18-164.10.1.el5.centos.plusxen"
-- which works! -- was required. thanks.
sorry this is becoming a treatise on kernel-building, but i appreciate
the necessity to try to rule out xen ...
atm, i've extracted/installed from the centos rpm, as Fajar
instructed. i've also run 'mkinitrd -f lvm2 -f md'
so now i have,
ls -al /boot/*el*
-rw-r--r-- 1 root root 68951 2010-01-08 14:54
/boot/config-2.6.18-164.10.1.el5.centos.plusxen
-rw-r--r-- 1 root root 8199432 2010-01-15 07:51
/boot/initrd-2.6.18-164.10.1.el5.centos.plusxen
-rw-r--r-- 1 root root 116122 2010-01-08 14:55
/boot/symvers-2.6.18-164.10.1.el5.centos.plusxen.gz
-rw-r--r-- 1 root root 1196044 2010-01-08 14:54
/boot/System.map-2.6.18-164.10.1.el5.centos.plusxen
-rw-r--r-- 1 root root 2031384 2010-01-08 14:54
/boot/vmlinuz-2.6.18-164.10.1.el5.centos.plusxen
-rw-r--r-- 1 root root 413719 2010-01-08 13:41
/boot/xen.gz-2.6.18-164.10.1.el5.centos.plus
-rwxr-xr-x 1 root root 965728 2010-01-08 15:01
/boot/xen-syms-2.6.18-164.10.1.el5.centos.plus
i've setup grub, to use the
{vmlinuz,initrd}-2.6.18-164.10.1.el5.centos.plusxen. at boot, i see
the hypervisor load, and the passoff to the centos kernel. but it
then gets stuck in a loop, endlessly repeating "volume group VG0 not
found".
fwiw, "/boot" is on a linux native RAID-1 part, and "/" is on a LV on
a RAID-1. of course, works fine @ boot to opensuse kernel(s).
what else do I need to get that centos kernel to boot my box? Or is
the 2.6.18* too old for support of LVM, RAID, etc (i doubt that ...)?
thanks.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|