[Xen-users] No networking on dom0 Lenny

[Nicolas Muñoz <nicolas.munoz.zz@xxxxxxxxx>]

Hi,

I am currently running a Xen 3.5 unstable over a Debian Lenny with linux kernel 2.6.26-2

My problem right now is that whatever I try, I don't manage to get networking on my dom0. Here are a bunch of messages I picked from the output of the command dmesg:

• eth0: MSI interrupt test failed
• no ownder
• ADDRCONF(NETDEV_UP): eth0 link is not ready

From the eth0 link is not ready, i found some information browsing forums, advising to add pci=noacpi or pci=nommconf but I did not get much success there...

I also thought that it might be a problem of network card driver, so I tried to install the latest version. I found the driver on the Intel website, based on the output of these commands, indicated on Intel website:

#lspci -v | grep Ethernet -A 1

> 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)
> Subsystem: Hewlett-Packard Company Device 2818

#ethtool -i eth0

> driver: e1000e
> version: 1.0.15-NAPI
> firmware-version: 1.3-1
> bus-info: 0000:00:19.0

The driver is from the Intel website, I downloaded it, unzipped it, make installed from src/ directory, rmmod-ed e1000e and modprobe e1000e

Same things happen again and again.

If I try to work on it when I am on my dom0, here are outputs from some commands

# ifdown eth0

> [...]
> DHCPRELEASE on eth0 to 15.203.240.11 port 67
> send_packet: Network is unreachable
> send_packet: please consult README file regarding broadcast adress

# ifup eth0

> [...]
> Sending on   Socket/fallback
> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
> [...]
> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 
> NO DHCPOFFERS received
> No working leases in persistent database - sleeping.

Any idea folks?

Thanks in advance...

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users