Please find xm dmesg
below:
\ \/ /___ _ __ |___ / |___ \ / |
\ // _ \ '_ \ |_ \ __) | | |
/ \ __/ | | | ___) | / __/ _| |
/_/\_\___|_| |_| |____(_)_____(_)_|
(XEN) Xen version 3.2.1 (root@) (gcc version 4.2.3
(Ubuntu 4.2.3-2ubuntu7)) Mon Jun 9 18:24:56 IST 2008
(XEN) Latest ChangeSet: unavailable
(XEN) Command line: acpi=off
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0
seconds
(XEN) EDID info not retrieved because no DDC
retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 000000000009ec00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000003ec20000 (usable)
(XEN) 000000003ec20000 - 000000003ec22000 (reserved)
(XEN) 000000003ec22000 - 000000003ecfa000 (usable)
(XEN) 000000003ecfa000 - 000000003edea000 (ACPI NVS)
(XEN) 000000003edea000 - 000000003edee000 (usable)
(XEN) 000000003edee000 - 000000003edf3000 (ACPI data)
(XEN) 000000003edf3000 - 000000003edf4000 (usable)
(XEN) 000000003edf4000 - 000000003edff000 (ACPI data)
(XEN) 000000003edff000 - 000000003ee00000 (usable)
(XEN) 000000003ee00000 - 000000003f800000 (reserved)
(XEN) 00000000f0000000 - 00000000f8000000 (reserved)
(XEN) 00000000fff00000 - 0000000100000000 (reserved)
(XEN) System RAM: 1004MB (1028720kB)
(XEN) Xen heap: 9MB (10100kB)
(XEN) Domain heap initialised: DMA width 32 bits
(XEN) PAE enabled, limit: 16 GB
(XEN) Processor #0 6:15 APIC version 20
(XEN) Enabling APIC mode: Flat. Using 0 I/O APICs
(XEN) BIOS bug, no explicit IRQ entries, using default
mptable. (tell your hw vendor)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2666.419 MHz processor.
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @
2.66GHz stepping 0b
(XEN) Total of 1 processors activated.
(XEN) Platform timer overflows in 2 jiffies.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 1 CPUs
(XEN) AMD IOMMU: Disabled
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000
-> 0xc044d97c
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.:
000000003a000000->000000003c000000 (228232 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c044d97c
(XEN) Init. ramdisk: c044e000->c15bfa00
(XEN) Phys-Mach map: c15c0000->c16a6e20
(XEN) Start info: c16a7000->c16a7474
(XEN) Page tables: c16a8000->c16b9000
(XEN) Boot stack: c16b9000->c16ba000
(XEN) TOTAL: c0000000->c1800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Initrd len 0x1171a00, start at 0xc044e000
(XEN) Scrubbing Free RAM: done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors
and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three
times to switch input to Xen)
(XEN) Freed 96kB init memory.
Please find the dmesg
below
04fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: 2000-2fff
MEM window: 50100000-501fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: 50500000-505fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: 50600000-506fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: 50700000-507fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: 50000000-500fffff
PREFETCH window: 50800000-508fffff
PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)
PCI: Found IRQ 9 for device 0000:00:1c.0
PCI: Sharing IRQ 9 with 0000:00:1a.2
PCI: Sharing IRQ 9 with 0000:00:1a.7
PCI: Sharing IRQ 9 with 0000:00:1c.4
PCI: Sharing IRQ 9 with 0000:02:00.0
PCI: Setting latency timer of device 0000:00:1c.0 to
64
PCI: Found IRQ 9 for device 0000:00:1c.1
PCI: Sharing IRQ 9 with 0000:00:19.0
PCI: Setting latency timer of device 0000:00:1c.1 to
64
PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
PCI: Found IRQ 10 for device 0000:00:1c.2
PCI: Sharing IRQ 10 with 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.3
PCI: Sharing IRQ 10 with 0000:06:02.0
PCI: Setting latency timer of device 0000:00:1c.2 to
64
PCI: Enabling device 0000:00:1c.3 (0000 -> 0002)
PCI: Found IRQ 11 for device 0000:00:1c.3
PCI: Sharing IRQ 11 with 0000:00:1d.1
PCI: Sharing IRQ 11 with 0000:06:03.0
PCI: Setting latency timer of device 0000:00:1c.3 to
64
PCI: Enabling device 0000:00:1c.4 (0000 -> 0002)
PCI: Found IRQ 9 for device 0000:00:1c.4
PCI: Sharing IRQ 9 with 0000:00:1a.2
PCI: Sharing IRQ 9 with 0000:00:1a.7
PCI: Sharing IRQ 9 with 0000:00:1c.0
PCI: Sharing IRQ 9 with 0000:02:00.0
PCI: Setting latency timer of device 0000:00:1c.4 to
64
PCI: Setting latency timer of device 0000:00:1e.0 to
64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
TCP: Hash tables configured (established 131072 bind
65536)
TCP reno
registered
PM: Adding info for platform:pcspkr
IA-32 Microcode Update Driver: v1.14a-xen
<tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1213606966.680:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PM: Adding info for platform:vesafb.0
floppy0: Unable to grab DMA2 for the floppy driver
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K
size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
PNP: No PS/2 controller found. Probing ports directly.
PM: Adding info for platform:i8042
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
PM: Adding info for serio:serio0
PM: Adding info for serio:serio1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input0
fuse init (API version 7.7)
input: ImPS/2 Generic Wheel Mouse as
/class/input/input1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
PCI: Found IRQ 10 for device 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1c.2
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.3
PCI: Sharing IRQ 10 with 0000:06:02.0
PCI: Setting latency timer of device 0000:00:1a.0 to
64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered,
assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 10, io base 0x000030e0
PM: Adding info for usb:usb1
PM: Adding info for No Bus:usbdev1.1_ep00
usb usb1: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 2.00 loaded.
PM: Adding info for No Bus:usbdev1.1_ep81
PCI: Found IRQ 11 for device 0000:00:1a.1
PCI: Sharing IRQ 11 with 0000:00:1f.2
PCI: Setting latency timer of device 0000:00:1a.1 to
64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered,
assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 11, io base 0x000030c0
PM: Adding info for usb:usb2
PM: Adding info for No Bus:usbdev2.1_ep00
usb usb2: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
ieee1394: Initialized config rom entry `ip1394'
PM: Adding info for No Bus:usbdev2.1_ep81
PCI: Found IRQ 9 for device 0000:00:1a.2
PCI: Sharing IRQ 9 with 0000:00:1a.7
PCI: Sharing IRQ 9 with 0000:00:1c.0
PCI: Sharing IRQ 9 with 0000:00:1c.4
PCI: Sharing IRQ 9 with 0000:02:00.0
PCI: Setting latency timer of device 0000:00:1a.2 to
64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered,
assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 9, io base 0x000030a0
PM: Adding info for usb:usb3
PM: Adding info for No Bus:usbdev3.1_ep00
usb usb3: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev3.1_ep81
PCI: Found IRQ 11 for device 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:00:1d.7
PCI: Setting latency timer of device 0000:00:1d.0 to
64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered,
assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00003080
PM: Adding info for usb:usb4
PM: Adding info for No Bus:usbdev4.1_ep00
usb usb4: configuration #1 chosen from 1 choice
PM: Adding info for usb:4-0:1.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev4.1_ep81
PCI: Found IRQ 11 for device 0000:00:1d.1
PCI: Sharing IRQ 11 with 0000:00:1c.3
PCI: Sharing IRQ 11 with 0000:06:03.0
PCI: Setting latency timer of device 0000:00:1d.1 to
64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered,
assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00003060
PM: Adding info for usb:usb5
PM: Adding info for No Bus:usbdev5.1_ep00
usb usb5: configuration #1 chosen from 1 choice
PM: Adding info for usb:5-0:1.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev5.1_ep81
PCI: Found IRQ 10 for device 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1c.2
PCI: Sharing IRQ 10 with 0000:00:1f.3
PCI: Sharing IRQ 10 with 0000:06:02.0
PCI: Setting latency timer of device 0000:00:1d.2 to
64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered,
assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003040
PM: Adding info for usb:usb6
PM: Adding info for No Bus:usbdev6.1_ep00
usb usb6: configuration #1 chosen from 1 choice
PM: Adding info for usb:6-0:1.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev6.1_ep81
PCI: Found IRQ 9 for device 0000:00:1a.7
PCI: Sharing IRQ 9 with 0000:00:1a.2
PCI: Sharing IRQ 9 with 0000:00:1c.0
PCI: Sharing IRQ 9 with 0000:00:1c.4
PCI: Sharing IRQ 9 with 0000:02:00.0
PCI: Setting latency timer of device 0000:00:1a.7 to
64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered,
assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device
0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 9, io mem 0x503a5c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
PM: Adding info for usb:usb7
PM: Adding info for No Bus:usbdev7.1_ep00
usb usb7: configuration #1 chosen from 1 choice
PM: Adding info for usb:7-0:1.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
PM: Adding info for No Bus:usbdev7.1_ep81
PCI: Found IRQ 11 for device 0000:00:1d.7
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Setting latency timer of device 0000:00:1d.7 to
64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered,
assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device
0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0x503a5800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
PM: Adding info for usb:usb8
PM: Adding info for No Bus:usbdev8.1_ep00
usb usb8: configuration #1 chosen from 1 choice
PM: Adding info for usb:8-0:1.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
PM: Adding info for No Bus:usbdev8.1_ep81
ahci 0000:00:1f.2: version 2.0
PCI: Found IRQ 11 for device 0000:00:1f.2
PCI: Sharing IRQ 11 with 0000:00:1a.1
PCI: Setting latency timer of device 0000:00:1f.2 to
64
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3
Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pmp pio
slum part
ata1: SATA max UDMA/133 cmd 0xEE098100 ctl 0x0 bmdma
0x0 irq 11
ata2: SATA max UDMA/133 cmd 0xEE098180 ctl 0x0 bmdma
0x0 irq 11
ata3: SATA max UDMA/133 cmd 0xEE098200 ctl 0x0 bmdma
0x0 irq 11
ata4: SATA max UDMA/133 cmd 0xEE098280 ctl 0x0 bmdma
0x0 irq 11
ata5: SATA max UDMA/133 cmd 0xEE098300 ctl 0x0 bmdma
0x0 irq 11
ata6: SATA max UDMA/133 cmd 0xEE098380 ctl 0x0 bmdma
0x0 irq 11
scsi0 : ahci
PM: Adding info for No Bus:host0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48
NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi1 : ahci
PM: Adding info for No Bus:host1
ata2: SATA link down (SStatus 0 SControl 300)
scsi2 : ahci
PM: Adding info for No Bus:host2
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
PM: Adding info for No Bus:host3
ata4: SATA link down (SStatus 0 SControl 300)
scsi4 : ahci
PM: Adding info for No Bus:host4
ata5: SATA link down (SStatus 0 SControl 300)
scsi5 : ahci
PM: Adding info for No Bus:host5
ata6: SATA link down (SStatus 0 SControl 300)
PM: Adding info for No Bus:target0:0:0
Vendor: ATA Model: ST3160215AS Rev: 3.AA
Type: Direct-Access ANSI SCSI
revision: 05
PM: Adding info for scsi:0:0:0:0
PCI: Found IRQ 10 for device 0000:06:02.0
PCI: Sharing IRQ 10 with 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1c.2
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.3
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a
21140 MII PHY (1) block.
tulip0: MII transceiver #3 config 3100 status 7809
advertising 01e1.
eth0: Digital DS21140 Tulip rev 32 at 00011000,
00:00:C0:12:33:00, IRQ 10.
PCI: Found IRQ 11 for device 0000:06:03.0
PCI: Sharing IRQ 11 with 0000:00:1c.3
PCI: Sharing IRQ 11 with 0000:00:1d.1
PM: Adding info for ieee1394:fw-host0
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]
MMIO=[50004000-500047ff] Max Packet=[2048] IR/IT contexts=[4/8]
SCSI device sda: 312581808 512-byte hdwr sectors
(160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors
(160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
***************************************************************
***************************************************************
** WARNING: Currently emulating unsupported memory
accesses **
** in /lib/tls glibc libraries. The
emulation is **
** slow. To ensure full performance you
should **
** install a 'xen-friendly' (nosegneg)
version of **
** the library, or disable tls support by
executing **
** the following as
root: **
** mv /lib/tls
/lib/tls.disabled **
** Offending process: init
(pid=2583) **
***************************************************************
***************************************************************
Continuing...
PM: Adding info for ieee1394:0090270001f39032
ieee1394: Host added: ID:BUS[0-00:1023]
GUID[0090270001f39032]
PM: Adding info for ieee1394:0090270001f39032-0
ts: Compaq touchscreen protocol output
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver
version: 0.4
input: PC Speaker as /class/input/input2
PCI: Found IRQ 10 for device 0000:00:1b.0
PCI: Setting latency timer of device 0000:00:1b.0 to
64
eth0: Setting full-duplex based on MII#3 link partner
capability of 03e1.
hda_codec: Unknown model for ALC883, trying auto-probe
from BIOS...
lp: driver loaded but no devices found
ieee1394: sbp2: Driver forced to serialize I/O
(serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better
performance
Adding 1951888k swap on /dev/sda2. Priority:-1
extents:1 across:1951888k
Adding 1951888k swap on /dev/sda4. Priority:-2
extents:1 across:1951888k
EXT3 FS on sda3, internal journal
ip_tables: (C) 2000-2006 Netfilter Core Team
ppdev: user-space parallel port driver
Bridge firewalling registered
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (7452 buckets, 59616 max) -
228 bytes per conntrack
peth0: Promiscuous mode enabled.
device peth0 entered promiscuous mode
audit(1213607006.148:2): dev=peth0 prom=256 old_prom=0
auid=4294967295
eth0: port 1(peth0) entering learning state
eth0: topology change detected, propagating
eth0: port 1(peth0) entering forwarding state
peth0: Promiscuous mode enabled.
Bluetooth: Core ver 2.10
PM: Adding info for platform:Bluetooth
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager
initialized
Bluetooth: HCI socket layer initialized
peth0: Promiscuous mode enabled.
peth0: Promiscuous mode enabled.
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
peth0: Promiscuous mode enabled.
peth0: Promiscuous mode enabled.
peth0: Promiscuous mode enabled.
peth0: Promiscuous mode enabled.
vnet0: no IPv6 routers present
eth0: no IPv6 routers present
peth0: Promiscuous mode enabled.
peth0: Promiscuous mode enabled.
Thanks
Saravana
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx]
On Behalf Of Rafal Kupka
Sent: Tuesday, June 17, 2008 3:15 PM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Xen shows single processor on a dual core system
On Tue, Jun 17, 2008 at 02:27:15PM +0530, Saravana
Kumar K, Bangalore
wrote:
Hi,
> On dual core processor machine, I installed
ubuntu-8.04 in which I
> installed xen-3.2.
>
> In ubuntu:
>
> # cat /proc/cpuinfo --> Shows two
processors information.
Please post the output from dmesg command on freshly
started system.
> But in Xen on the same machine:
>
> # cat /proc/cpuinfo --> Shows only one
processor information.
Again, dmesg and xm dmesg results should give us some
clues.
> The contents of this e-mail and any attachment(s)
are confidential and
> intended for the named recipient(s) only.
[...]
I guess I'm not allowed to reply...
Greetings,
Kupson
--
Great software without the knowledge to run it is
pretty useless.
(Linux Gazette #1)
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
Home