xen-users
Re: [Xen-users] san fibrechannel device in HVM domU
to your question:
"Permissive mode should only be used as a fall back for unknown devices.
I think the correct solution for dealing with these device-specific
configuration space registers is to identify them and add the
device-specific fields to the overlay. This patch adds a special
configuration space handler for network cards based on the tg3 linux
network device driver. This handler should allow for reads/writes to all
of the configuration space registers that the tg3 driver requires."
from: http://lists.xensource.com/archives/html/xen-devel/2006-07/msg00549.html
also are you sure that the Dom0 is not using your
HBA's? look also at udev...
because you message is:
> Error: Fail to assign device(2:1.0): maybe VT-d
is not enabled, or the
> device is not exist, or it has already been assigned to other
domain
;-)
Mit freundlichen Grüßen / with kind regards
Gerhard Possler
IT Architect
IBM Enterprise Linux Services
ELS
Wiki@IBM (only accessible
via IBM intranet)
| IT-Services and
Solutions GmbH
Rathausstr. 7, D-09111 Chemnitz
Geschäftsführung: Rainer Laier, Michael Mai
Sitz der Gesellschaft: Chemnitz
Registergericht: Amtsgericht Chemnitz, HRB 18409
http://www.itsas.de/
| gerhard.possler@xxxxxxxxxx
Mobil +49 (0) 160 90578637 |
"Sebastian Reitenbach"
<sebastia@xxxxxxxxxxxxxxxxxxxx>
12.02.2008 14:29
Please respond to
"Sebastian Reitenbach" <sebastia@xxxxxxxxxxxxxxxxxxxx> |
|
To
| sebastia@xxxxxxxxxxxxxxxxxxxx, Gerhard
Possler/Germany/IBM@IBMDE
|
cc
| xen-users@xxxxxxxxxxxxxxxxxxx
|
Subject
| Re: [Xen-users] san fibrechannel device
in HVM domU |
|
Hi,
Gerhard Possler <gerhard.possler@xxxxxxxxxx> wrote:
> Hi Sebastian,
>
> can you post the vm config file? i saw some problems when i use the
long
> form:
>
> pci=[ '0000:01:00.0','0000:01:01.0' ]
>
> in my file i use the short form:
>
> pci=[ '01:00.0','01:01.0' ]
I just tried the short form, as xm create parameter, and in the
configuration file, but with the same error message all the time. Here
is my
domU configuration:
ostype="windowsxp"
name="SERVER2003"
memory=511
vcpus=1
uuid="0a03ad93-9ead-43db-ef0c-09349db88a2e"
>
>
>
localtime=1
builder="hvm"
extid=0
device_model="/usr/lib/xen/bin/qemu-dm"
kernel="/usr/lib/xen/boot/hvmloader"
boot="d"
pci=[ '02:01.0' ]
disk=[ 'file:/var/lib/xen/images/SERVER2003/disk0,hda,w',
'file:/vms/windowsxp.img,hdc:cdrom,r', ]
vif=[ 'mac=00:16:3e:1d:6c:e8,model=rtl8139,type=ioemu', ]
vnc=1
#vncunused=1
vncconsole=1
apic=0
acpi=1
pae=1
usb=1
usbdevice='tablet'
serial="pty"
The Windows domU is booting, without the pci line using above configuration
file.
>
> also i use in /boot/grub/menu.lst:
> title XEN -- openSUSE 10.3 - PAE
> root (hd0,4)
> kernel /xen-pae.gz
> module /vmlinuz-2.6.22.13-0.3-xenpae
> root=/dev/mapper/nvidia_deihceca_part7 vga=normal
> resume=/dev/mapper/nvidia_deihceca_part6 splash=silent showopts
> pciback.hide=(0000:01:00.0)(0000:01:01.0)
> module /initrd-2.6.22.13-0.3-xenpae
>
> and at least in /etc/init.d/boot.local:
>
> # HFC ISDN PCI Devices remove from Dom0 and also set permissive
> modprobe pciback hide='(01:00.0)(01:01.0)'
> echo -n 0000:01:00.0 > sys/bus/pci/drivers/pciback/permissive
> echo -n 0000:01:01.0 > sys/bus/pci/drivers/pciback/permissive
what is this doing? the howto only told me to do:
echo -n "<Your PCI ID>" > /sys/bus/pci/drivers/pciback/new_slot
echo -n "<Your PCI ID>" > /sys/bus/pci/drivers/pciback/bind
I don't have it hardcoded yet to the grub.conf, just have done all the
stuff
manually, as in the howto described. The dom0 did not saw the device
anymore. However, when starting, the error message below:
>
> xm create pci=0000:02:01.0 SERVER2003
> Using config file "./SERVER2003".
> Error: Fail to assign device(2:1.0): maybe VT-d is not enabled, or
the
> device is not exist, or it has already been assigned to other domain
>
>
> well as you see i use ISDN Cards and not HBA'a... but it should work
also
> with that.
However, maybe that is the difference, as the error message says I do not
have VT-d enabled, what I cannot do, as I am on a AMD based box, or does
the
AMD Vanderbilt provides equivalents?
More on VT-d here:
http://softwarecommunity.intel.com/articles/eng/1416.htm
Do I have just only the wrong hardware, or should I be able to use a SAN
card in a domU in general?
thanks
Sebastian
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|