[Xen-users] Problems booting Xen 3.0.1 with Qlogic 2312 cards

["Edwards, Nigel \(Nigel Edwards\)" <nigel.edwards@xxxxxx>]

Hi,
Has anybody successfully booted Xen 3.0.1 with Qlogic 2312 cards?  Our
environment is an HP ProLiant BL25p G1, dual processor AMD Opteron
machine
with 8GB RAM. The card has two ports, meaning it will present itself
as having two QLA2312 circuits.

We have built Xen with "XEN_TARGET_X86_PAE=y" and recompiled the
Qlogic drivers with debugging turned on. It seems to be hanging in the
initialization stage - it doesn't look like the kprint of the NVRAM
contents is completing. This happens when we insmod qla2300.ko in 
initrd-2.6.12.6-xen - details below.

Any advice, help or hints would be appreciated.
Cheers,
Nigel.


Loading kernel/drivers/scsi/scsi_mod.ko
SCSI subsystem initialized
Loading kernel/drivers/scsi/sd_mod.ko
Loading kernel/drivers/block/cciss.ko
HP CISS Driver (v 2.6.6)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:03:02.0[A] -> Link [LNKA] -> GSI 7 (level, low)
-> IRQ
7
cciss: using DAC cycles
Loading kernel/drivers/scsi/scsi_transport_fc.ko
Loading kernel/drivers/scsi/qla2xxx/qla2xxx.ko ql2xmaxqdepth=16
qlport_down_retr
y=30 ql2xloginretrycount=30
QLogic Fibre Channel HBA Driver
Loading kernel/drivers/scsi/qla2xxx/qla2300.ko
ACPI: PCI Interrupt 0000:06:01.0[A] -> Link [LNKA] -> GSI 7 (level, low)
-> IRQ
7
qla2300 0000:06:01.0: Found an ISP2312, irq 7, iobase 0xee02a000
qla2300 0000:06:01.0: Configuring PCI space...
Hardware identified as QLA2312
qla2300 0000:06:01.0: Configure NVRAM parameters...
scsi(0): Contents of NVRAM
 0   1   2   3   4   5   6   7   8   9  Ah  Bh  Ch  Dh  Eh  Fh
--------------------------------------------------------------
49  53  50  20  01  00  01  00  06  e0  00  08  00  01  10

**** This is as far as it gets.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users