| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
RE: [Xen-users] RE: [Fedora-xen] Difficulties using the Fedora Core 4
Whilst I'm sure that Redhat is working on a publicly available RPM (or
similar) that you can install straight off, I would suggest that you
build your own Xen/Dom0 kernel. It's not TERRIBLY hard - although
there's some quirks and catches. This works for me:
Download some version of Xen from www.xensource.com (snapshot or 3.0.0
release).
Unpack into xen-<ver>
cd xen-<ver>
make world
<wait for some time>
cd *0 <this takes you to the Dom0 core>
make ARCH=xen menuconfig
<I personally turn off modules and enable devfs + smp, but you may want
other configurations>
cd ..
make install
cd dist
./install.sh
<edit grub.conf or similar to have lines like this:
title Xen-32
root (hd0,0)
kernel (hd0,0)/boot/xen-3.0-devel.gz dom0_mem=200000
com1=115200,8n1 console=vga,com1 sync_console
module (hd0,0)/boot/vmlinuz-2.6.12-xen0 root=/dev/hda1
console=ttyS0
>
If you use modules, you'll need to add a line saying "module
(hd0,0)/boot/initrd-xxxx", and you need to create the initial ramdisk
with "mkinitrd" in your linux-*0 directory. It's not hard, but to me
it's easier to just build a kernel with all the drivers in one file -
you loose a chunk of memory from this, of course. My kernel is a bit
over 4MB uncompressed code and a good megabyte of data on top of that.
Of course, your hard-disk layout may be different - adjust accordingly.
I hope this helps.
--
Mats
> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of
> Leonardo Pinto
> Sent: 22 December 2005 15:09
> To: Xen Users
> Cc: Fedora Xen
> Subject: [Xen-users] RE: [Fedora-xen] Difficulties using the
> Fedora Core 4
>
> The version that better behaved was download of
> http://people.redhat.com/riel/xen_for_fc4, however this also broke...
>
> I am bringing update my Fedora 4 for the FC5 to test the Xen
> of it, but it would like to continue in the FC4.
>
> - Where I obtain this its version: kernel-xen0-2.6.12-1.1447_FC4???
>
> --
> Leonardo Pinto
> listas#openlogic dot com br
>
>
> > Leonardo Pinto wrote:
> > Hi, I am having difficulties using the Fedora Core 4 Updated.
> >
> > I tried following kernels:
> > kernel-xen0-2.6.11-1.1369_FC4.i686: Dont initialize;
> > kernel-xen0-2.6.12-1.1454_FC4.i686: Initiates all good. However I
> > receive WATCHDOG... in the net card and after a time the system it
> > breaks; kernel-xen0-2.6.13-1.1532_FC4.i686: Kernel small alloc
> > panic...
> > kernel-xen-hypervisor-2.6.14-1.21_FC5.i686: Executable not
> > recognized...;
> >
> > - Which version more would be indicated to use in the Fedora Core 4
> > Updated for a AMD Athlon(TM) XP 2000+, 512MB RAM?
> >
> > --
> > Leonardo Pinto
> > listas#openlogic dot com br
> >
> > ________________________________________________
> > Mensagem enviada usando OpenLogic WebMail 2.7.2
> >
> > Many people have had problems with those versions you mention. The
> > Fedora Xen packages were (and still are?) broken for a long time.
> >
> > I've had luck on FC4 with kernel-xen0-2.6.12-1.1447_FC4,
> which I also
> > use for my domU.
> >
> > Others using FC4 have had luck with Riel's fixes to the Xen Fedora
> packages:
> > http://people.redhat.com/riel/xen_for_fc4/
> >
> > You might also check out the FC5 rawhide to see if their
> built-in Xen
> stuff
> > works yet.
> >
> > Stephen Brueckner, ATC-NY
>
>
> ________________________________________________
> Mensagem enviada usando OpenLogic WebMail 2.7.2
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home