[Xen-users] Problem with ttylinux setup (was: New user question)

["Andrew P." <infofarmer@xxxxxxxxx>]

Hi,

I have the same problem as digz does.

Following the configuration of ttylinux suggested by the user's
manual, I get this:

===========================================================
[root@localhost boot]# uname -a
Linux localhost.localdomain 2.6.12-1.1398_FC4xen0 #1 SMP Fri Jul 15
01:53:34 EDT 2005 i686 i686 i386 GNU/Linux
[root@localhost boot]# xm create try -c
Using config file "/etc/xen/try".
Started domain TryDomain, console on port 9604
************ REMOTE CONSOLE: CTRL-] TO QUIT ********
Linux version 2.6.12-1.1398_FC4xenU
(bhcompile@xxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.0.0 20050519 (Red
Hat 4.0.0-8)) #1 SMP Fri Jul 15 02:05:44 EDT 2005
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000004000000 (usable)
64MB LOWMEM available.
Using x86 segment limits to approximate NX protection
DMI not present.
IRQ lockup detection disabled
Allocating PCI resources starting at 04000000 (gap: 04000000:fc000000)
Built 1 zonelists
Kernel command line:  ip=1.2.3.4:1.2.3.4::::eth0:off root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Xen reported: 2798.716 MHz processor.
Using tsc for high-res timesource
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 60800k/65536k available (1783k kernel code, 4648k reserved,
504k data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
per-CPU timeslice cutoff: 1463.16 usecs.
task migration cache decay timeout: 2 msecs.
SMP motherboard not detected.
smpboot_clear_io_apic_irqs
Brought up 1 CPUs
NET: Registered protocol family 16
xen_mem: Initialising balloon driver.
Grant table initialized
audit: initializing netlink socket (disabled)
audit(1124723172.606:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 57652F2F3358E32D
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Xen virtual console successfully installed as tty1
Event-channel device installed.
Blkif frontend is using grant tables.
xen_blk: Initialising virtual block device driver
xen_net: Initialising virtual ethernet driver.
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 256 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 3, 49152 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 156k freed
Inconsistency detected by ld.so: rtld.c: 1180: dl_main: Assertion `
===========================================================

Any ideas? Google says very little on this matter.

Thanks,
Andrew P.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users