| |
|
 |
|
 |
|
|
|
| |
|
|
xen-ppc-devel
Re: [XenPPC] Booting Dom0 with SLES10 on JS21
jimi wrote:
>>> INIT: Id "1" respawning too fast: disabled for 5 minutes
>>
>> Those are entries in /etc/inittab, it usually means that getty
>> doesn't like the device it is associated with.
>> There still might be some udev issues.
Comparing Dom0 startup with standard SUSE10 startup -
INIT for Dom0 immediately goes to 'Entering runlevel',
while in standard case, INIT first runs /etc/init.d/boot
Dom0:
Waiting for device /dev/sda3 to appear: ok
rootfs: major=8 minor=3 devn=2051
fsck 1.38 (30-Jun-2005)
[/bin/fsck.reiserfs (1) -- /] fsck.reiserfs -a /dev/sda3
Reiserfs super block in block 16 on 0x4000 of format 3.6 with standard journal
Blocks (total/free): 17388352/16885104 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/sda3' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda3
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18,0
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
ReiserFS: sda3: warning: acl not supported.
ReiserFS: sda3: warning: user_xattr not supported.
INIT: version 2.86 booting
<<<<<<<<<<
INIT: Entering runlevel: 3
INIT: Id "1" respawning too fast: disabled for 5 minutes
INIT: Id "2" respawning too fast: disabled for 5 minutes
INIT: Id "cons" respawning too fast: disabled for 5 minutes
INIT: Id "3" respawning too fast: disabled for 5 minutes
INIT: Id "4" respawning too fast: disabled for 5 minutes
INIT: Id "5" respawning too fast: disabled for 5 minutes
INIT: Id "6" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel
Standard SLES10:
Waiting for device /dev/sda3 to appear: ok
rootfs: major=8 minor=3 devn=2051
fsck 1.38 (30-Jun-2005)
[/bin/fsck.reiserfs (1) -- /] fsck.reiserfs -a /dev/sda3
Reiserfs super block in block 16 on 0x4000 of format 3.6 with standard journal
Blocks (total/free): 17388352/16885410 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/sda3' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda3
INIT: version 2.86 booting
<<<<<<<<<<
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Mounting debugfs at /sys/kernel/debug done
Initializing /dev done
Mounting devpts at /dev/pts done
Boot logging started on /dev/ttyS0(/dev/console (deleted)) at Sat Jul 8
17:38:32 2006
Activating swap-devices in /etc/fstab... done
Starting udevd done
Loading required kernel modules done
Activating device mapper...
done
Starting MD Raid done
Waiting for udev to settle...
Scanning for LVM volume groups...
Reading all physical volumes. This may take a while...
No volume groups found
No volume groups found
Activating LVM volume groups...
No volume groups found
done
Checking file systems...
fsck 1.38 (30-Jun-2005)
Checking all file systems. done
done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted done
Loading AppArmor module done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
Setting up the hardware clock done
Setting up hostname 'linux-92yr' done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
Creating /var/log/boot.msg done
Activating remaining swap-devices in /etc/fstab... done
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protection done
Disabling IP forwarding done
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local done
INIT: Entering runlevel: 5
[...]
_______________________________________________
Xen-ppc-devel mailing list
Xen-ppc-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ppc-devel
|
|
|
| |
|
Home