| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Re: Loosing vmx flag with Lenny 2.6.26-1-xen-amd64 on Q9
Markus Kiefer wrote:
Fajar A. Nugraha schrieb:
On Tue, Feb 3, 2009 at 3:32 PM, Markus Kiefer <markus@xxxxxxxxxx> wrote:
Here's the output of xm info
hw_caps :
It should be like this
virt_caps : hvm
Here's /proc/cpuinfo on my system. vmx flag does not show when on
xen-kernel
flags : fpu de tsc msr pae cx8 apic sep mtrr cmov pat clflush
acpi
mmx fxsr sse sse2 ss ht syscall lm constant_tsc pni est cx16 lahf_lm
Again, have you check the BIOS? I suspect that is your problem.
Regards,
Fajar
You're right. Virtualization was enabled. But I also had to disable
"VT for direct I/O", which was enabled before. It's working now.
Thanks for your advice and time.
Regards,
Markus
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
fyi, i've never had VMX show up in /proc/cpuinfo when booted into a xen
kernel, only in xm dmesg:
(XEN) Detected 1866.780 MHz processor.
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Xeon(R) CPU E5320 @ 1.86GHz stepping 07
(XEN) Booting processor 1/4 eip 8c000
(XEN) CPU1: Intel(R) Xeon(R) CPU E5320 @ 1.86GHz stepping 07
(XEN) Booting processor 2/2 eip 8c000
(XEN) CPU2: Intel(R) Xeon(R) CPU E5320 @ 1.86GHz stepping 07
(XEN) Booting processor 3/6 eip 8c000
(XEN) CPU3: Intel(R) Xeon(R) CPU E5320 @ 1.86GHz stepping 07
(XEN) Booting processor 4/1 eip 8c000
(XEN) CPU4: Intel(R) Xeon(R) CPU E5320 @ 1.86GHz stepping 07
(XEN) Booting processor 5/5 eip 8c000
(XEN) CPU5: Intel(R) Xeon(R) CPU E5320 @ 1.86GHz stepping 07
(XEN) Booting processor 6/3 eip 8c000
(XEN) CPU6: Intel(R) Xeon(R) CPU E5320 @ 1.86GHz stepping 07
(XEN) Booting processor 7/7 eip 8c000
(XEN) CPU7: Intel(R) Xeon(R) CPU E5320 @ 1.86GHz stepping 07
(XEN) Total of 8 processors activated.
- jonathan
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home