|
|
|
|
|
|
|
|
|
|
xen-users
Re: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12
James Harper schreef:
No idea. What does lspci -v tell you? Mine says:
08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
Gigabit Ethernet PCI Express (rev 21)
Subsystem: Hewlett-Packard Company Device 7032
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+
Queue=0/3 Enable-
Capabilities: [d0] Express Endpoint, MSI 00
Kernel driver in use: tg3
Kernel modules: tg3, ipmi_si
06:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
Gigabit Ethernet PCI Express (rev 21)
Subsystem: Hewlett-Packard Company NC320i PCIe Gigabit Server
Adapter
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+
Queue=0/3 Enable-
Capabilities: [d0] Express Endpoint IRQ 0
That's all, no more lines like yours..? The system (Debian) is up-to-date.
Can you also do the xenstore-ls on the backend? Eg from your line above:
backend = "/local/domain/0/backend/vif/12/0"
do 'xenstore-ls /local/domain/0/backend/vif/12/0'
James
bridge = "xenbr0"
domain = "win2003-2"
handle = "0"
uuid = "6a71e350-ed24-f7e6-0ff1-02395dcd62f8"
script = "/etc/xen/scripts/vif-bridge"
state = "4"
frontend = "/local/domain/12/device/vif/0"
mac = "00:04:fc:40:e4:22"
online = "1"
frontend-id = "12"
type = "netfront"
feature-sg = "1"
feature-gso-tcpv4 = "1"
feature-rx-copy = "1"
hotplug-status = "connected"
Joost
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- RE: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, (continued)
- Re: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, Joost van den Broek
- RE: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, James Harper
- RE: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, James Harper
- Re: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, Joost van den Broek
- RE: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, James Harper
- Re: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, Joost van den Broek
- RE: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, James Harper
- Re: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, Joost van den Broek
- RE: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, James Harper
- Re: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12,
Joost van den Broek <=
- RE: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, James Harper
- Re: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, Joost van den Broek
- Re: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, Pasi Kärkkäinen
- Re: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, Pasi Kärkkäinen
- RE: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, James Harper
- Re: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, Pasi Kärkkäinen
RE: [Xen-users] GPL PV drivers for Windows 0.9.11-pre12, James Harper
|
|
|
|
|