Hi Age_M,
I'll give it a try! Thanks! I thought about switching to single-quotes
from double-quotes but haven't done it yet. The PCI devices are
definitely IRQ sharing (IRQ's 21 and 22). I'll play around some more.
Since at least one of them showed up in domU, I knew at least it was a
good sign ;)
Thanks, again!
Cheers,
Daniel
Age_M wrote:
Hi Daniel,
try this:
pci = [ '01:08.0','01:09.0' ]
If it still doesn't work, try using noirqdebug. I am not sure if you
have to add it to your grub config or at the extra line in domU config
but it resolves Problems with PCI devices sharing one IRQ. Maybe you
just google it, to get the full information on this.
Good luck,
Age_M
Daniel Kao wrote:
Hi All,
This might be a stupid question, but I have two PCI devices that I
want to pass-thru to a PV domU. I can pass one of them, but not
both. I'm sure it's a stupid syntax issue within my configuration
file. When I do a "lspci" in the domU, (CentOS 5.1), only one of the
devices shows up.
(e.g.) 00:00.0 Multimedia video controller: Internext Compression Inc
iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
The two devices are, (01:08.0) and (01:09.0) in dom0. If I do either
of the following:
pci = [ "01:08.0" ] or pci = [ "01:09.1" ] in the configuration file,
they'll show up.
I've tried:
pci = [ "01:08.0, 01:09.0" ]
pci = [ "01:08.0,01:09.0" ]
pci = [ "01:08.0", "01:09.0" ]
pci = [ "01:08.0","01:09.0" ]
No go on getting both passed. I'm sure I'm just doing something
stupid with the syntax.
Any help would be appreciated! Thanks!
P.S. Both devices are TV Tuner cards. I've verified the drivers for
them in dom0 are not loaded/unbound and both devices exist in
/sys/bus/pci/drivers/pciback/.
--
Cheers,
Daniel Kao, Übermind
Seattle, WA
dkao@xxxxxxxxxxxx
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home