Re: [Xen-users] Syntax for PCI Pass-Thru for multiple devices?

[Age_M <Age_M@xxxxxx>]

Hi Daniel,

try this:

pci = [ '01:08.0','01:09.0' ]

If it still doesn't work, try using noirqdebug. I am not sure if you 
have to add it to your grub config or at the extra line in domU config 
but it resolves Problems with PCI devices sharing one IRQ. Maybe you 
just google it, to get the full information on this.
Good luck,
Age_M

Daniel Kao wrote:
> Hi All,
>
> This might be a stupid question, but I have two PCI devices that I 
> want to pass-thru to a PV domU.  I can pass one of them, but not 
> both.  I'm sure it's a stupid syntax issue within my configuration 
> file.  When I do a "lspci" in the domU, (CentOS 5.1), only one of the 
> devices shows up.
> (e.g.) 00:00.0 Multimedia video controller: Internext Compression Inc 
> iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
> The two devices are, (01:08.0) and (01:09.0) in dom0.  If I do either 
> of the following:
> pci = [ "01:08.0" ] or pci = [ "01:09.1" ] in the configuration file, 
> they'll show up.
> I've tried:
>
> pci = [ "01:08.0, 01:09.0" ]
> pci = [ "01:08.0,01:09.0" ]
> pci = [ "01:08.0", "01:09.0" ]
> pci = [ "01:08.0","01:09.0" ]
>
> No go on getting both passed.  I'm sure I'm just doing something 
> stupid with the syntax.
> Any help would be appreciated!  Thanks!
>
> P.S.  Both devices are TV Tuner cards.  I've verified the drivers for 
> them in dom0 are not loaded/unbound and both devices exist in 
> /sys/bus/pci/drivers/pciback/.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users