|
|
|
|
|
|
|
|
|
|
xen-users
R: R: [Xen-users] BROADCOM 5708 ON POWER EDGE 1955
Ok, fine thanks!
-----Messaggio originale-----
Da: Ivan Porro [mailto:pivan@xxxxxxxxxxxxx]
Inviato: venerdì 26 ottobre 2007 15.30
A: Carlo Granisso
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Oggetto: Re: R: [Xen-users] BROADCOM 5708 ON POWER EDGE 1955
Ok.
I don't know how, but you can cross-compile on another machine and move here
your new ramfs and vmlinuz.
I try to send mine to you in a separate private email
ivan
Carlo Granisso wrote:
> I can't. My system must boot via pxe (with xen 3.1 kernel).
> Is there other way?
>
> -----Messaggio originale-----
> Da: Ivan Porro [mailto:pivan@xxxxxxxxxxxxx]
> Inviato: venerdì 26 ottobre 2007 15.16
> A: Carlo Granisso
> Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> Oggetto: Re: [Xen-users] BROADCOM 5708 ON POWER EDGE 1955
>
> Hi
>
> I've solved it.
>
> You have to compile Xen kernel 3.1 from source. Then, you have to
> download drivers from Broadcom and compile your own kernel module for
network.
>
> hope it helps
>
> ivan
>
> From my twiki:
>
>
> Xen:
>
> wget
> http://bits.xensource.com/oss-xen/release/3.1.0/src.tgz/xen-3.1.0-src.
> tgz
> tar xzvf xen-3.1.0-src.tgz
> cd xen-3.1.0-src
> make -j4 world
> make install
>
> The DELL Power Edge 1950 like many other servers mount a Broadcom
> NetXtreme II controller, which may be slow, unstable or make network
> failing at all with Linux kernel before 2.1.19. Unfortunately, Xen 3.1
> is configured to use
> 2.6.18 so we have to provide a new kernel. This should b done anyway
> since the 1.5.0c version of the driver is recommended.
> This apply of course also to other kind of drivers.
>
> Identify your hardware:
>
> lspci |grep Eth
>
> We have:
>
> 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
> Gigabit Ethernet (rev 12) 08:00.0 Ethernet controller: Broadcom
> Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
>
> Donwload and compile drivers. If the link does not work, check on
> Broadcom web site, driver download section. Since we probably are with
> the machine booted on non-Xen kernel, we have to tell Makefile to use
> the right kernel when compiling:
>
> mkdir /usr/src/driver
> cd /usr/src/driver
> wget
> http://www.broadcom.com/docs/driver_download/NXII/linux-1.5.10c.zip
> unzip linux-1.5.10c.zip
> mv Server/Linux/Driver/* .
> tar xzvf bnx2-1.5.10c.tar.gz
> cd bnx2-1.5.10c/
> cd src/
> make KVER=2.6.18-xen
> make install KVER=2.6.18-xen
>
> Since we have added a new module, we have to regenerate the ramdisk:
>
> mkinitramfs -o /boot/initrd.img-2.6.18-xen 2.6.18-xen
>
> Carlo Granisso wrote:
>> Hello, I've this strange problem.
>> When Xen kernel start and it try to start eth devices, network
>> doesn't
> work.
>> It seems to be a problem with NICs firmware.
>>
>> Anyone had this problem? Do you know where I can download firmware
> upgrade?
>> (on DELL's site I've just searched...)
>>
>>
>> Thanks,
>>
>>
>> Carlo
>>
>>
>>
>> No virus found in this outgoing message.
>> Checked by AVG Free Edition.
>> Version: 7.5.503 / Virus Database: 269.15.11/1093 - Release Date:
>> 25/10/2007
>> 17.38
>>
>>
>>
>> _______________________________________________
>> Xen-users mailing list
>> Xen-users@xxxxxxxxxxxxxxxxxxx
>> http://lists.xensource.com/xen-users
>>
>
>
> --
> http://www.bio.dist.unige.it
> voice: +39 010 353 2789
> fax: +39 010 353 2948
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.15.11/1093 - Release Date:
> 25/10/2007
> 17.38
>
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.15.11/1093 - Release Date:
> 25/10/2007
> 17.38
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
--
http://www.bio.dist.unige.it
voice: +39 010 353 2789
fax: +39 010 353 2948
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.15.11/1093 - Release Date: 25/10/2007
17.38
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.15.11/1093 - Release Date: 25/10/2007
17.38
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
|
|