| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
R: [Xen-users] BROADCOM 5708 ON POWER EDGE 1955
I can't. My system must boot via pxe (with xen 3.1 kernel).
Is there other way?
-----Messaggio originale-----
Da: Ivan Porro [mailto:pivan@xxxxxxxxxxxxx]
Inviato: venerdì 26 ottobre 2007 15.16
A: Carlo Granisso
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Oggetto: Re: [Xen-users] BROADCOM 5708 ON POWER EDGE 1955
Hi
I've solved it.
You have to compile Xen kernel 3.1 from source. Then, you have to download
drivers from Broadcom and compile your own kernel module for network.
hope it helps
ivan
From my twiki:
Xen:
wget
http://bits.xensource.com/oss-xen/release/3.1.0/src.tgz/xen-3.1.0-src.tgz
tar xzvf xen-3.1.0-src.tgz
cd xen-3.1.0-src
make -j4 world
make install
The DELL Power Edge 1950 like many other servers mount a Broadcom NetXtreme
II controller, which may be slow, unstable or make network failing at all
with Linux kernel before 2.1.19. Unfortunately, Xen 3.1 is configured to use
2.6.18 so we have to provide a new kernel. This should b done anyway since
the 1.5.0c version of the driver is recommended.
This apply of course also to other kind of drivers.
Identify your hardware:
lspci |grep Eth
We have:
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 12) 08:00.0 Ethernet controller: Broadcom Corporation
NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
Donwload and compile drivers. If the link does not work, check on Broadcom
web site, driver download section. Since we probably are with the machine
booted on non-Xen kernel, we have to tell Makefile to use the right kernel
when compiling:
mkdir /usr/src/driver
cd /usr/src/driver
wget http://www.broadcom.com/docs/driver_download/NXII/linux-1.5.10c.zip
unzip linux-1.5.10c.zip
mv Server/Linux/Driver/* .
tar xzvf bnx2-1.5.10c.tar.gz
cd bnx2-1.5.10c/
cd src/
make KVER=2.6.18-xen
make install KVER=2.6.18-xen
Since we have added a new module, we have to regenerate the ramdisk:
mkinitramfs -o /boot/initrd.img-2.6.18-xen 2.6.18-xen
Carlo Granisso wrote:
> Hello, I've this strange problem.
> When Xen kernel start and it try to start eth devices, network doesn't
work.
>
> It seems to be a problem with NICs firmware.
>
> Anyone had this problem? Do you know where I can download firmware
upgrade?
> (on DELL's site I've just searched...)
>
>
> Thanks,
>
>
> Carlo
>
>
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.15.11/1093 - Release Date:
> 25/10/2007
> 17.38
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
--
http://www.bio.dist.unige.it
voice: +39 010 353 2789
fax: +39 010 353 2948
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.15.11/1093 - Release Date: 25/10/2007
17.38
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.15.11/1093 - Release Date: 25/10/2007
17.38
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home