|   xen-users
Re: [Xen-users] Xen 3.0.4.1 AMD-V HVM 
| 
Hi again,
actually I still have the Xen 3.0.4.1 version installed. But I have seen 
some ebuilds(using Gentoo) for xen 3.1
Will try to install, maybe today (having some minor network problems 
with e1000), but AMD-V in xen-3.0.4.1 looks quite fine. 
We'll stay in touch
Greetz Age_M
 
-----Original Message-----
From: Holger [mailto:Age_M@xxxxxx] 
Sent: 07 June 2007 15:47 
To: Petersson, Mats
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Xen 3.0.4.1 AMD-V HVM
Hi there :-D
I don't believe it. your explanation brought me up to an idea!
if the g stepping cpu is the first cpu that support deactivation of 
AMD-V, what would happen if i use a bios version that doesn' 
recognize 
the G-step cpu :-p 
voila.. bios version F2 activates the AMD-V feature -> I 
don't believe it.
I am just worrying what would happen to my system!? turning off 
speedstepping should do it, right?
 
Well, you shouldn't be able to use "PownerNow!" on a the new procesor
with the old BIOS, but other than that, it shouldn't cause any noticable
problems, unless there's some new bugs in the new processor that
requires special fixes (and if there is, they are probably fairly
obscure, so unlikely to occur on "average" code). 
Can you try running Xen 3.1 with the newer BIOS and see if says "AMD-V
locked by BIOS" when you attempt that? Unfortunately, the older version
of Xen doesn't "know" the "lock" bit... 
--
Mats
 
Greetz Age_M
Petersson, Mats schrieb:
  
  
      
Gigabyte to fix
-----Original Message-----
From: Holger [mailto:Age_M@xxxxxx] 
Sent: 07 June 2007 14:59 
To: Petersson, Mats
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Xen 3.0.4.1 AMD-V HVM
Hi there again ;)
Thanks for the reply, I think I get it now. So the only 
problem is the 
Mainboard. Do you think I am in a position to expect
 you have tothis? Is it my right to say "This is an AM2 mainboard, so 
        
 is a keybuild this feature into the bios?". I mean, virtualization 
        
 Well, the KEY feature to processors that go into an AM2 is
feature of AM2, right?
 
the ability
 
to use DDR2 memory (which for the same performance is less expensive
than DDR). It just so happens that we (AMD) choose to implement
virtualization features into the same product upgrade
 
cycle, so AM2 is
 
an easy way to explain which processors have AMD-V or not.
And the other key point here is that before Rev G, it was
 
very difficult
 to disable AMD-V. In Rev G, it's one bit which is "sticky" 
      
 
(sticky means
 that it can't be reset without resetting the entire 
      
 
processor) in one
 register to disable AMD-V. 
There is ABSOLUTELY no reason why this shouldn't be fixable 
      
 
in the BIOS.
   
      
Yes, I agree - although I would also say that if you bought
I really hope, that I don't have to buy a new mainboard again :-/
 
the system
 with the intention of running AMD-V, then it would be fair 
      
 
to say that
 
you should be able to take the motherboard back to the shop with a
complaint that "it doesn't do what it should be able to"
 
based on not
 being able to run AMD-V. [Being stricly legal, this is 
      
 
possibly beyond
 
what the legal definition of "fit for purpose" covers if you didn't
explicitly say to the retailer that you NEED the AMD-V
 
feature - but I
 still would attempt to get a replacement it on these 
      
 
grounds before just
 buying a new motherboard]. 
--
Mats
 
Thanks for your detailed explanations ;)
Greetz Holger
Petersson, Mats schrieb:
  
  
      
          
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf
 
Of Holger
 This was in reference to the NEW processors that are not
Sent: 07 June 2007 14:30
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Xen 3.0.4.1 AMD-V HVM
Hello Mats,
I think I didn't really get the point in your statement.
"please wait until the processors are available"
 
yet on the
 X2 (65nm)
market - I can't really tell the general public about details of
processors that are not yet available - at least not if I want to
continue working for AMD... What processors are you talking about?! My AMD AM2 3600+ 
            
 already hasalready has the AMD-V feature, right?!? And the Mainboard 
        
            
 turned off this AMD-V feature, but I want to turn it ON 
        
            
 
again, right?!
     
        
            
Aha! 65 nm is the Rev G model. I'm not sure, but I think
 
Rev G has the
 ability to disable AMD-V. But your BIOS really should 
          
 
have a way to
 ENABLE it if that's the case. [Most of the processors 
      
          
 
currently on the
 market are Rev F - I only saw the first Rev G myself the 
          
 
other day,
 
although I knew of their existance a long time ago]
 So, what do I have to do to get HVM support? New CPU? New 
Mainboard?? Or 
should I completely switch to Intel Core2Duo?
    
        
            
I'd suggest if Gigabyte isn't helping you (soon), you
 
should invest in a
 different motherbaord. 
  
      
          
That wasn't my intention. Sorry for that.
I am completely irritated now :-p
 
Greetz Holger
Petersson, Mats wrote:
  
  
      
          
              
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of 
Christian Horn 
Sent: 07 June 2007 09:14
To: Tony Hoyle
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Xen 3.0.4.1 AMD-V HVM
On Wed, Jun 06, 2007 at 08:02:38PM +0100, Tony Hoyle wrote:
 Yes.  Some manufacturers actually do this (especially 
      
          
              
                  
laptops). It's 
possible a bios upgrade will reenable the option.
 
Are you sure manufaturers can disable this for AM2-boards?
For intel its well known, but for AMD..
 
I'll probably be told off for explaining this :-(
Without going into "secrets", yes there is a way to "turn
 
off" AMD-V
 with the BIOS, and no, you can't ask for more details 
      
          
              
 
unless you have an
 NDA with AMD. It's also not possible to "re-enable it". 
          
              
 
Although the
 BIOS _SHOULD_ allow the enabling/disabling to be "user 
          
              
 
selectable".
 Future versions have a more well-documented way to do 
              
 
this. Again,
 unless you have an NDA with AMD, please wait until the 
      
          
              
 
processors are
 
available, and there will be more details available to everyone.
--
Mats
 
Christian
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
 
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
 
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
 
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
 
 
 
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
 | 
 
| <Prev in Thread] | Current Thread | [Next in Thread> |  | 
Re: [Xen-users] Xen 3.0.4.1 AMD-V HVM, Christian HornRe: [Xen-users] Xen 3.0.4.1 AMD-V HVM, (continued)
 
RE: [Xen-users] Xen 3.0.4.1 AMD-V HVM, Petersson, Mats
Re: [Xen-users] Xen 3.0.4.1 AMD-V HVM, Holger
RE: [Xen-users] Xen 3.0.4.1 AMD-V HVM, Petersson, Mats
Re: [Xen-users] Xen 3.0.4.1 AMD-V HVM, Holger
RE: [Xen-users] Xen 3.0.4.1 AMD-V HVM, Petersson, Mats
Re: [Xen-users] Xen 3.0.4.1 AMD-V HVM, Holger
RE: [Xen-users] Xen 3.0.4.1 AMD-V HVM, Petersson, Mats
Re: [Xen-users] Xen 3.0.4.1 AMD-V HVM,
Holger <=
 |  |  |