[Xen-users] how to manage bridge externally

[Daniele Palumbo <daniele@xxxxxxxxxxxx>]

hi.

i have gentoo.
i have vlans.
i have all domus on eth1, and since this is only for domus i do not need peth1 
renaming and things like that.

now on:
i want my bridge script, as long as 3.0.4 is no more working.

i'll explain better:
to start xend i have to:
- start xend
- stop xend
- start net.eth1
- start xend

this is the only way to have all working.

this is my actual xen network script:
XENDIR=/etc/xen/scripts/
$XENDIR/network-bridge "$@" netdev=eth1 bridge=xenbr1 vifnum=1
$XENDIR/network-bridge "$@" netdev=eth1.600 bridge=xenbr1.600 vifnum=3
$XENDIR/network-bridge "$@" netdev=eth1.14 bridge=xenbr1.14 vifnum=5
[...] this continue for all my vlans.

i did something like that (forget about syntax error, i didn't made "cut and 
paste", but this is what i did):
ifconfig eth1 up
vconfig add eth1 600 [and 14, ... i'll pick 600 as an example]
ifconfig eth1.600 up
brcrl addbr xenbr1
brctl addif eth1 xenbr1
brctl xenbr1 setfd 0 
brctl xenbr1 sethello 0
brcrl addbr xenbr1.600
brctl addif eth1.600 xenbr1.600
brctl xenbr1.600 setfd 0 
brctl xenbr1.600 sethello 0

then i pass both xenbr1 and xenbr1.600 to domu.

xenbr1.600 is working correctly, xenbr1 no.
and i can't see packet passing through xenbr1 in dom0.
both vif1.0 and vif1.1 is correctly attached to the bridge, and eth1 and 
eth1.600 too.

any hint?

thanks
Daniele

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users