WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] Failed to Install

To: Dominik Sennfelder <mailingliste@xxxxxxxxxxxxxxxxxx>
Subject: Re: [Xen-users] Failed to Install
From: Dominik Sennfelder <mailingliste@xxxxxxxxxxxxxxxxxx>
Date: Wed, 27 Jul 2005 13:43:15 +0200
Cc: xen-users@xxxxxxxxxxxxxxxxxxx, Daniel Hulme <dh286@xxxxxxxxx>
Delivery-date: Wed, 27 Jul 2005 11:41:54 +0000
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <42E75090.6070808@xxxxxxxxxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <42E74BB5.3000408@xxxxxxxxxxxxxxxxxx> <20050727100344.0387a47c@xxxxxxxxxxxxxxxxxxx> <42E75090.6070808@xxxxxxxxxxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mozilla Thunderbird 1.0+ (Windows/20050712)
Dominik Sennfelder wrote:
Daniel Hulme wrote:
Result
Unable to mount root Filesystem.

title Xen 3.0 / XenLinux 2.6.12
kernel          /boot/xen.gz dom0_mem=64000
module          /boot/vmlinuz-2.6-xen0 root=/dev/sda1 ro console=tty0

The Problem is that i dont see the detection of the Serveraid adpater
if dom0 ist booting.
so if the Adpater is not recognized the root fs will not be found.
If support for your RAID card or the root filesystem is built as a
module, you will have to either build it into the kernel (see below) or
make an initrd and add it to your GRUB config as a second *module*, not
using the initrd command in GRUB. You create an initrd the usual way,
using 'mkinitrd 2.6.12-xen0'.
ok i have to try that.
Where do i have to configure the Options that the
dom0 Kernel uses the Drivers the actual Kernel uses?

As described in the README, you can cd into the linux-2.6.12-xen0
directory in the source tree and 'make ARCH=xen menuconfig'. With the
options for building a dom0 kernel turned on (which they should be
already) the config is very similar to the standard kernel
configuration.
I tried to configure the Kernel but i miss a lot of  Kernel Options.

The problem is that i miss a lot of Configuration Options.
e.g. the only choseable options in SCSI LOW Level Device Drivers are

[*] Serial ATA (SATA) support <M> SCSI debugging host simulator
So i can,t build a dom0 domain with the needet Drivers for my system.
Dominik

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>