WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] Failed to Install

To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Failed to Install
From: Dominik Sennfelder <mailingliste@xxxxxxxxxxxxxxxxxx>
Date: Wed, 27 Jul 2005 10:54:13 +0200
Delivery-date: Wed, 27 Jul 2005 08:52:50 +0000
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mozilla Thunderbird 1.0+ (Windows/20050712)
Hello

We have the following Configuration

Hardware:
IBM 346
Dual Xeon 3,4 Ghz
6 GB Ram
4 x 73,3 GB SCSI Disc (Raid5)
IBM Serveraid Adapter 7k

Software:
Debian Sarge

Kernel:
Modified Debian Kernel 2.6.8 with PAE support, Servraid, Nic and fs Driver build into the Kernel.

I tried to install Xen-Stable.

Result
Unable to mount root Filesystem.

I tried to build unstable from source

but the result was the same.

The Xen Kernel boots. It Seams without PAE which i activated in Config.mk. But thet is a lesser Problem.

The Configuration of Grub seems to be correct.

title Xen 3.0 / XenLinux 2.6.12
kernel          /boot/xen.gz dom0_mem=64000
module          /boot/vmlinuz-2.6-xen0 root=/dev/sda1 ro console=tty0

title           Debian GNU/Linux, kernel 2.6.8
root            (hd0,0)
kernel          /boot/vmlinuz-2.6.8 root=/dev/sda1 ro
initrd          /boot/initrd.img-2.6.8
savedefault
boot

The Kernel 2.6.8 works.

The Problem is that i dont see the detection of the Serveraid adpater if
dom0 ist booting.
so if the Adpater is not recognized the root fs will not be found.

Where do i have to configure the Options that the
dom0 Kernel uses the Drivers the actual Kernel uses?

Greets Dominik

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>