WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

RE: [Xen-devel] RE: PCI devices remap from dom0 to domU with pv-ops kern

To: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
Subject: RE: [Xen-devel] RE: PCI devices remap from dom0 to domU with pv-ops kernel
From: "Lin, Ray" <Ray.Lin@xxxxxxx>
Date: Thu, 14 Oct 2010 11:54:33 -0600
Accept-language: en-US
Acceptlanguage: en-US
Cc: "xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>, "bruce.edge@xxxxxxxxx" <bruce.edge@xxxxxxxxx>
Delivery-date: Thu, 14 Oct 2010 10:55:16 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <20101014174909.GB7312@xxxxxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: ActryCcGMYBH2RuxQsi/PolFQJt6MgAAKYLg
Thread-topic: [Xen-devel] RE: PCI devices remap from dom0 to domU with pv-ops kernel
Thanks. I'll look into it.


-Ray 

-----Original Message-----
From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@xxxxxxxxxx] 
Sent: Thursday, October 14, 2010 10:49 AM
To: Lin, Ray
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; bruce.edge@xxxxxxxxx
Subject: Re: [Xen-devel] RE: PCI devices remap from dom0 to domU with pv-ops 
kernel

On Thu, Oct 14, 2010 at 11:26:03AM -0600, Lin, Ray wrote:
> 
> Konrad,
> 
>   We choose "Virtual" and the dom0/domU show like this. It doesn't remap to 
> what we want. You mentioned about "write your own plugin that would do 
> remapping per your desire". Could you elaborate it a bit ? Thanks.

Sure. Look in drivers/xen/pciback. There are four files of interest:

vpci.c
slot.c
passthrough.c
controller.c

By default, the vpci.c is selected, where in the domU the devices start from 
00:00.0. The passthrough is obvious. 

The slot.c is where we have only two bus and all the devices are stuck under 
the slots.
So a maximum of 64 devices, and the device function is ignored:

This is what it would show up (I think, you might want to double-check this):
00:01.0:0c04: 11f8:8032 (rev 08)
00:02.0:0c04: 11f8:8032 (rev 08)
00:03.0:0c04: 11f8:8032 (rev 08)
00:04.0:0c04: 11f8:8032 (rev 08)

The controller, is "PCI "Controller" Backend - virtualize PCI bus topology 
based on PCI  controllers.  Devices under the same PCI controller are exposed 
on the  same virtual domain:bus.  Within a bus, device slots are virtualized  
to compact the bus. " (from controller.c)

I think based on what you said earlier, you just want to use the "slot" backend:
CONFIG_XEN_PCIDEV_BACKEND_SLOT=y
> 
> Dom0:
> kaan-18:~# lspci -n | grep 11f8
> 07:00.0 0c04: 11f8:8032 (rev 08)
> 07:00.1 0c04: 11f8:8032 (rev 08)
> 07:00.2 0c04: 11f8:8032 (rev 08)
> 07:00.3 0c04: 11f8:8032 (rev 08)
> 
> DomU:
> kaan-18-dpm:~# lspci -n
> 00:00.0 0c04: 11f8:8032 (rev 08)
> 00:00.1 0c04: 11f8:8032 (rev 08)
> 00:00.2 0c04: 11f8:8032 (rev 08)
> 00:00.3 0c04: 11f8:8032 (rev 08)
> 
> 
> -Ray
> 
> -----Original Message-----
> From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@xxxxxxxxxx]
> Sent: Wednesday, October 13, 2010 11:52 AM
> To: Lin, Ray
> Cc: bruce.edge@xxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxx
> Subject: Re: PCI devices remap from dom0 to domU with pv-ops kernel
> 
> On Wed, Oct 13, 2010 at 10:49:12AM -0600, Lin, Ray wrote:
> > 
> > Konrad,
> > 
> >     We try to remap the pci devices from dom0 to domU by assigning 
> > the pci in the domU configuration file. Such as
> > 
> >     pci="['01:00.0@11', '01:00.1@10', '04:00.0@13', '04:00.1@12']"
> > 
> > In hvm kernel, the domU would see the pci devices remapped like 
> > this,
> > 
> >     dom0 pci device 01:00.0   => domU pci device 00:11.0
> >     dom0 pci device 01:00.1  =>  domU pci device 00:10.0
> >     dom0 pci device 04:00.0  =>  domU pci device 00:13.0
> >     dom0 pci device 04:00.1  =>  domU pci device 00:12.0
> > 
> >  But pv-ops kernel seems ignore the remapping. Is there any way (kernel 
> > configuration setting ??) to make it work ?
> 
> Not completly.
> 
> When you compile your Xen PCI backend, you should see an option whether you 
> want Virtual PCI, Passthrough or some other type. By default it will pick the 
> Virtual one so that it just enumerates from zero the PCI devices. You could 
> write your own plugin that would do remaping per your desire.
> > 
> > Thanks,
> > Ray
> > 
> > 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel