Konrad,
We choose "Virtual" and the dom0/domU show like this. It doesn't remap to
what we want. You mentioned about "write your own plugin that would do
remapping per your desire". Could you elaborate it a bit ? Thanks.
Dom0:
kaan-18:~# lspci -n | grep 11f8
07:00.0 0c04: 11f8:8032 (rev 08)
07:00.1 0c04: 11f8:8032 (rev 08)
07:00.2 0c04: 11f8:8032 (rev 08)
07:00.3 0c04: 11f8:8032 (rev 08)
DomU:
kaan-18-dpm:~# lspci -n
00:00.0 0c04: 11f8:8032 (rev 08)
00:00.1 0c04: 11f8:8032 (rev 08)
00:00.2 0c04: 11f8:8032 (rev 08)
00:00.3 0c04: 11f8:8032 (rev 08)
-Ray
-----Original Message-----
From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@xxxxxxxxxx]
Sent: Wednesday, October 13, 2010 11:52 AM
To: Lin, Ray
Cc: bruce.edge@xxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: Re: PCI devices remap from dom0 to domU with pv-ops kernel
On Wed, Oct 13, 2010 at 10:49:12AM -0600, Lin, Ray wrote:
>
> Konrad,
>
> We try to remap the pci devices from dom0 to domU by assigning the
> pci in the domU configuration file. Such as
>
> pci="['01:00.0@11', '01:00.1@10', '04:00.0@13', '04:00.1@12']"
>
> In hvm kernel, the domU would see the pci devices remapped like this,
>
> dom0 pci device 01:00.0 => domU pci device 00:11.0
> dom0 pci device 01:00.1 => domU pci device 00:10.0
> dom0 pci device 04:00.0 => domU pci device 00:13.0
> dom0 pci device 04:00.1 => domU pci device 00:12.0
>
> But pv-ops kernel seems ignore the remapping. Is there any way (kernel
> configuration setting ??) to make it work ?
Not completly.
When you compile your Xen PCI backend, you should see an option whether you
want Virtual PCI, Passthrough or some other type. By default it will pick the
Virtual one so that it just enumerates from zero the PCI devices. You could
write your own plugin that would do remaping per your desire.
>
> Thanks,
> Ray
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home