Re: [Xen-devel] Compiling nouveau open source nvidia graphics card drivers for Xen paravirt-operations domain 0 kernel

["Mr. Teo En Ming (Zhang Enming)" <enming.teo@xxxxxxxxxxxxxxx>]

OMG! OMG! OMG! I have solved the problem with Xorg X server (GUI) not previously working under Xen pv-ops dom 0 kernels.

Here is what I did:

A.	Booted computer using NVIDIA card

1.	nvidia-installer --uninstall

2.	yum groupremove "X Window System"

3.	yum groupinstall "X Window System"

4.	Xorg -configure

5.	mv /root/xorg.conf.new /etc/X11/xorg.conf-nv

6. 	Make sure xorg.conf-nv contains "Driver 'nv'"

7.	cd /etc/X11; ln -s xorg.conf-nv xorg.conf

8.	Check X server is started successfully

B.	Reboot computer using integrated Intel GMA 4500 graphics on Intel DQ45CB

1.	Xorg -configure

2.	vi /root/xorg.conf.new

3.	Remove all sections related to nv inside 
xorg.conf.new, leaving only intel

4.	cp /root/xorg.conf.new /etc/X11/xorg.conf-intel

5.	cd /etc/X11; ln -s xorg.conf-intel xorg.conf

6.	Start X server. This causes garbage GUI output.

7.	Add nomodeset kernel parameter to /boot/grub/grub.conf. Reboot again.

8.	Start X server. GNOME desktop environment appears. SUCCESS! No garbage GUI output!


The solution to getting X server (Graphical User Interface) work under a Xen paravirt-operations domain 0 kernel is not to use NVIDIA cards. Since it is clearly impossible to get official NVIDIA drivers and open source nouveau drivers to work with Jeremy Fitzhardinge's paravirt ops dom 0 kernels. And also Jeremy's git tree does not have nouveau sources either.

Hence,  instead of using NVIDIA graphics cards with Xen pv_ops dom 0 kernels, use Intel GMA 4500 to get graphical displays (I am using Intel Desktop Board DQ45CB). 

Congratulate me on my success!!!

-- 
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) 
Technical Support Engineer 
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza 
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Alma Maters: Singapore Polytechnic, National University of Singapore

On 08/22/2009 10:22 PM, Boris Derzhavets wrote:

I don't have it.
I am not expecting PVOPS kernel to have Nvidia support in a foreseeable future.
B.

--- On Sat, 8/22/09, Teo En Ming (Zhang Enming) <enming.teo@xxxxxxxxxxxxxxx> wrote:

From: Teo En Ming (Zhang Enming) <enming.teo@xxxxxxxxxxxxxxx>
Subject: RE: [Xen-devel] Compiling nouveau open source nvidia graphics card drivers for Xen paravirt-operations domain 0 kernel
To: bderzhavets@xxxxxxxxx
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Saturday, August 22, 2009, 9:52 AM

Nope. What is the link?

 

Regards,
 

Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)

Technical Support Engineer

Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541

Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx

---

From: Boris Derzhavets [mailto: bderzhavets@xxxxxxxxx ]
Sent: Saturday, August 22, 2009 9:23 PM
To: enming.teo@xxxxxxxxxxxxxxx
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-devel] Compiling nouveau open source nvidia graphics card drivers for Xen paravirt-operations domain 0 kernel

 

All what i do on F11:-

# yum install vncserver

Then put in /etc/rc.local

export HOME=/root
vncserver :1 -geometry 1280x1024 -depth 16

Reboot Xen Host and connect remotely via vncviewer  , using local X-server and GDM on Xen Host. KDM fails to with Xen.

There was one feed from Ian Campbell regarding Nvidia support by pvops kernel,
followed by Jeremy Fitzhardinge notice. :(

 Do you remember that ?

Boris.
P.S. GeForce 8500 GT installed on my box.
--- On Sat, 8/22/09, Mr. Teo En Ming (Zhang Enming) < enming.teo@xxxxxxxxxxxxxxx > wrote:

From: Mr. Teo En Ming (Zhang Enming) < enming.teo@xxxxxxxxxxxxxxx >
Subject: Re: [Xen-devel] Compiling nouveau open source nvidia graphics card drivers for Xen paravirt-operations domain 0 kernel
To: enming.teo@xxxxxxxxxxxxxxx
Cc: bderzhavets@xxxxxxxxx , xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Saturday, August 22, 2009, 8:57 AM

I might give Driver "intel" a try in xorg.conf.. Let me reboot to Intel GMA4500 first.

-- 

Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) 

Technical Support Engineer 

Information Technology Department

Asiasoft Online Pte Ltd

Tampines Central 1 #04-01 Tampines Plaza 

 Singapore 529541

 Republic of
 Singapore

 Mobile : +65-9648-9798

MSN: teoenming@xxxxxxxxxxx

Alma Maters: Singapore Polytechnic,
 National University of
 Singapore

On 08/22/2009 08:53 PM, Mr. Teo En Ming (Zhang Enming) wrote:

Dear Boris,

Could you get X.org X server to work with Xen pv-ops dom 0 kernels 2.6..30-rc3 and 2.6.31-rc6 under Fedora 11 64-bit?

There is no nouveau driver for jeremy's dom 0 kernel. And when I tried to compiled nouveau against Jeremy's kernel, it would not work.

Although I could compile and install official nvidia drivers against Jeremy's kernel, X server will hang and freeze.

So I tried to use driver "nv" and "vesa" for X server when I booted Jeremy's kernel. But X still would not work and give me a backtrace.

All this is when I am using NVIDIA Geforce 8400 GS PCI Express x16.

If I switch over to using onboard integrated graphics Intel GMA 4500, is it supported under Jeremy Fitzhardinge's pvops dom 0 kernel? What driver can I use in xorg.conf?

Thank you.

-- 

Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) 

Technical Support Engineer 

Information Technology Department

Asiasoft Online Pte Ltd

Tampines Central 1 #04-01 Tampines Plaza 

 Singapore 529541

 Republic of
 Singapore

 Mobile : +65-9648-9798

MSN: teoenming@xxxxxxxxxxx

Alma Maters: Singapore Polytechnic,
 National University of
 Singapore

On 08/22/2009 08:44 PM, Boris Derzhavets wrote:

> Do I need to request nouveau and tungsten developers to make ttm and nouveau
> code Xen pvops dom 0 aware?

Why would you expect them to take care of Xen pvops ?


Boris.

--- On Sat, 8/22/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@xxxxxxxxxxxxxxx> wrote:

From: Mr. Teo En Ming (Zhang Enming) <enming.teo@xxxxxxxxxxxxxxx>
Subject: Re: [Xen-devel] Compiling nouveau open source nvidia graphics card drivers for Xen paravirt-operations domain 0 kernel
To: enming.teo@xxxxxxxxxxxxxxx
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Saturday, August 22, 2009, 8:31 AM

Dear Pasi,

I have compiled ttm and nouveau successfully against the stock/vanilla 2.6.31-rc6 kernel WITHOUT Xen paravirt-ops Domain 0 patch.

So it seems that nouveau could not be compiled against Xen pv-ops dom 0 kernel and could not work with it.

Do I need to request nouveau and tungsten developers to make ttm and nouveau code Xen pvops dom 0 aware?

-- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile : +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Alma Maters: Singapore Polytechnic, National University of Singapore



On 08/22/2009 07:43 PM, Mr. Teo En Ming (Zhang Enming) wrote:
> Dear Pasi,
>
> I am now trying to compile ttm and nouveau against stock vanilla 2.6.31-rc6 kernel with-out dom 0 patch.
>




_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 

 

_______________________________________________

Xen-devel mailing list

  Xen-devel@xxxxxxxxxxxxxxxxxxx

  http://lists.xensource.com/xen-devel

  

 

 

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.63/2316 - Release Date: 08/20/09 18:06:00

-----Inline Attachment Follows-----

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel